Refine
Year of publication
- 2017 (22) (remove)
Document Type
- Journal article (22) (remove)
Is part of the Bibliography
- yes (22)
Institute
- ESB Business School (11)
- Life Sciences (8)
- Informatik (3)
Publisher
- Springer (22) (remove)
Purpose: Human breath analysis is proposed with increasing frequency as a useful tool in clinical application. We performed this study to find the characteristic volatile organic compounds (VOCs) in the exhaled breath of patients with idiopathic pulmonary fibrosis (IPF) for discrimination from healthy subjects. Methods: VOCs in the exhaled breath of 40 IPF patients and 55 healthy controls were measured using a multi-capillary column and ion mobility spectrometer. The patients were examined by pulmonary function tests, blood gas analysis, and serum biomarkers of interstitial pneumonia. Results: We detected 85 VOC peaks in the exhaled breath of IPF patients and controls. IPF patients showed 5 significant VOC peaks; p-cymene, acetoin, isoprene, ethylbenzene, and an unknown compound. The VOC peak of p-cymene was significantly lower (p < 0.001), while the VOC peaks of acetoin, isoprene, ethylbenzene, and the unknown compound were significantly higher (p < 0.001 for all) compared with the peaks of controls. Comparing VOC peaks with clinical parameters, negative correlations with VC (r =−0.393, p = 0.013), %VC (r =−0.569, p < 0.001), FVC (r = −0.440, p = 0.004), %FVC (r =−0.539, p < 0.001), DLco (r =−0.394, p = 0.018), and %DLco (r =−0.413, p = 0.008) and a positive correlation with KL-6 (r = 0.432, p = 0.005) were found for p-cymene. Conclusion: We found characteristic 5 VOCs in the exhaled breath of IPF patients. Among them, the VOC peaks of p-cymene were related to the clinical parameters of IPF. These VOCs may be useful biomarkers of IPF.
This article provides a general overview of the most promising candidates of bio based materials and deals with the most important issues when it comes to their incorporation into PF resins. Due to their abundance on Earth, much knowledge of lignin-based materials has already been gained and uses of lignin in PF resins have been studied for many decades. Other natural polyphenols that are less frequently considered for impregnation are covered as well, as they do also possess some potential for PF substitution.
High quality decorative laminate panels typically consist of two major types of components: the surface layers comprising décor and overlay papers that are impregnated with melamine-based resins, and the core which is made of stacks of kraft papers impregnated with phenolic (PF) resin. The PF-impregnated layers impart superior hydrolytic stability, mechanical strength and fire-resistance to the composite. The manufacturing involves the complex interplay between resin, paper and impregnation/drying processes. Changes in the input variables cause significant alterations in the process characteristics and adaptations of the used materials and specific process conditions may, in turn, be required. This review summarizes the main variables influencing both processability and technological properties of phenolic resin impregnated papers and laminates produced therefrom. It is aimed at presenting the main influences from the involved components (resin and paper), how these may be controlled during the respective process steps (resin preparation and paper production), how they influence the impregnation and lamination conditions, how they affect specific aspects of paper and laminate performance, and how they interact with each other
(synergies).
Characterisation of porous knitted titanium for replacement of intervertebral disc nucleus pulposus
(2017)
Effective restoration of human intervertebral disc degeneration is challenged by numerous limitations of the currently available spinal fusion and arthroplasty treatment strategies. Consequently, use of artificial biomaterial implant is gaining attention as a potential therapeutic strategy. Our study is aimed at investigating and characterizing a novel knitted titanium (Ti6Al4V) implant for the replacement of nucleus pulposus to treat early stages of chronic intervertebral disc degeneration. Specific knitted geometry of the scaffold with a porosity of 67.67 ± 0.824% was used to overcome tissue integration failures. Furthermore, to improve the wear resistance without impairing original mechanical strength, electro-polishing step was employed. Electro-polishing treatment changed a surface roughness from 15.22 ± 3.28 to 4.35 ± 0.87 μm without affecting its wettability which remained at 81.03 ± 8.5°. Subsequently, cellular responses of human mesenchymal stem cells (SCP1 cell line) and human primary chondrocytes were investigated which showed positive responses in terms of adherence and viability. Surface wettability was further enhanced to super hydrophilic nature by oxygen plasma treatment, which eventually caused substantial increase in the proliferation of SCP1 cells and primary chondrocytes. Our study implies that owing to scaffolds physicochemical and biocompatible properties, it could improve the clinical performance of nucleus pulposus replacement.
Das Internet ist längst ein fester Bestandteil in den Marketing- und Vertriebsstrategien. Doch auch mit dem Einsatz von Onlinewerbung, Suchmaschinenoptimierung und der Nutzung von Social Media ist es Unternehmen oft nicht möglich, die erhoffte Aufmerksamkeit zu erhalten und die gewünschte Wirkung von Botschaften auf die Kunden zu erzielen. Mithilfe einer strukturierten Zusammenarbeit mit sogenannten Social Influencern ist es auch im B2B-Bereich möglich, ein authentisches und glaubhaftes Image aufzubauen.
To evaluate the quality of sleep, it is important to determine how much time was spent in each sleep stage during the night. The gold standard in this domain is an overnight polysomnography (PSG). But the recording of the necessary electrophysiological signals is extensive and complex and the environment of the sleep laboratory, which is unfamiliar to the patient, might lead to distorted results. In this paper, a sleep stage detection algorithm is proposed that uses only the heart rate signal, derived from electrocardiogram (ECG), as a discriminator. This would make it possible for sleep analysis to be performed at home, saving a lot of effort and money. From the heart rate, using the fast Fourier transformation (FFT), three parameters were calculated in order to distinguish between the different sleep stages. ECG data along with a hypnogram scored by professionals was used from Physionet database, making it easy to compare the results. With an agreement rate of 41.3%, this approach is a good foundation for future research.
This paper presents an approach for label-free brain tumor tissue typing. For this application, our dual modality microspectroscopy system combines inelastic Raman scattering spectroscopy and Mie elastic light scattering spectroscopy. The system enables marker-free biomedical diagnostics and records both the chemical and morphologic changes of tissues on a cellular and subcellular level. The system setup is described and the suitability for measuring morphologic features is investigated.
The influence of turbidity on the Raman signal strengths of condensed matter is theoretically analyzed and measured with laboratory - scale equipment for remote sensing. The results show the quantitative dependence of back- and forward-scattered signals on the thickness and elastic-scattering properties of matter. In the extreme situation of thin, highly turbid layers, the measured Raman signal strengths exceed their transparent analogs by more than a factor of ten. The opposite behavior is found for thick layers of low turbidity, where the presence of a small amount of scatterers leads to a decrease of the measured signal. The wide range of turbidities appearing in nature is experimentally realized with stacked polymer layers and solid/liquid dispersions, and theoretically modeled by the equation of radiative transfer using the analytical diffusion approximation or random walk simulations.
In this paper a method for the generation of gSPM with ontology-based generalization was presented. The resulting gSPM was modeled with BPMN/BPMNsix in an efficient way and could be executed with BPMN workflow engines. In the next step the implementation of resource concepts, anatomical structures, and transition probabilities for workflow execution will be realized.
Despite the significant potential offered by the powder coating process for finishing wood-based materials, until now it has been used almost exclusively for coating Medium Density Fiber Board (MDF). A research project aims to develop processes and substrate materials that will allow lightweight boards to be powder coated.
Umsatz und Gewinne stagnieren auf hohem Niveau, und dennoch steigen der Aktienkurs und der Gewinn pro Aktie – eine Entwicklung, die sich etwa bei Apple oder Ebay beobachten lässt. Aktionäre sollten wissen, welche Arithmetik sich hinter solchen Entwicklungen verbirgt und mit welchen Verfahren sie den Unternehmenswert am besten ermitteln können.
Wer in ein Unternehmen investiert, tut dies, um in Zukunft Geld zu verdienen. Er rechnet mit einer risikoadäquaten Rendite. Die Auswahl der Kennzahlen, die diese Wertsteigerung transparent machen, ist allerdings nicht trivial. Denn von ihnen hängt ab, ob die Unternehmensziele richtig vorgegeben und ob die Anreize für das Management richtig gesetzt werden.
Newly developed active pharmaceutical ingredients (APIs) are often poorly soluble in water. As a result the bioavailability of the API in the human body is reduced. One approach to overcome this restriction is the formulation of amorphous solid dispersions (ASDs), e.g., by hot-melt extrusion (HME). Thus, the poorly soluble crystalline form of the API is transferred into a more soluble amorphous form. To reach this aim in HME, the APIs are embedded in a polymer matrix. The resulting amorphous solid dispersions may contain small amounts of residual crystallinity and have the tendency to recrystallize. For the controlled release of the API in the final drug product the amount of crystallinity has to be known. This review assesses the available analytical methods that have been recently used for the characterization of ASDs
and the quantification of crystalline API content. Well established techniques like near- and mid-infrared spectroscopy (NIR and MIR, respectively), Raman spectroscopy, and emerging ones like UV/VIS, terahertz, and ultrasonic spectroscopy are considered in detail. Furthermore, their advantages and limitations are discussed with regard to general practical applicability as process analytical technology (PAT) tools in industrial manufacturing. The review focuses on spectroscopic methods which have been proven as most suitable for in-line and on-line process analytics. Further aspects are spectroscopic techniques that have been or could be integrated into an extruder.
This paper studies whether a monetary union can be managed solely by a rule based approach. The Five Presidents’ Report of the European Union rejects this idea. It suggests a centralisation of powers. We analyse the philosophy of policy rules from the vantage point of the German economic school of thought. There is evidence that a monetary union consisting of sovereign states is well organised by rules, together with the principle of subsidiarity. The root cause of the euro crisis is rather the weak enforcement of rules, compounded by structural problems. Therefore, we suggest a genuine rule-based paradigm for a stable future of the Economic and Monetary Union.
Die weiterhin hohen Schulden in einigen Staaten der Europäischen Wirtschafts- und Währungsunion lassen nach wie vor staatliche Insolvenzen befürchten. Um die entstandenen Probleme zu bewältigen, aber auch damit eine solche Situation erst gar nicht eintritt, hält der Autor eine staatliche Insovenzordnung – mit Bail-out durch die anderen Mitgliedstaaten nur in Notfällen – für erforderlich. Er schlägt einen staatlichen Abwicklungsmechanismus für überschuldete Euro-Länder vor, der auf einem Konzept des Sachverständigenrates für Wirtschaft von 2016 beruht.
Eine realistische Risikoeinschätzung ist Basis von verantwortungsvollen Unternehmensentscheidungen. Doch wie lassen sich Risiken richtig einschätzen? Verschiedene Instrumente des Risiko-Managements erlauben es, Risiken systematisch zu identifizieren, zu quantifizieren, zu bewerten und zu dokumentieren.
Risiken sind per se nichts Schlechtes, wenn der dadurch erzielte Ertrag für das eingegangene Risiko angemessen ist. Dieser Zusammenhang wird allerdings nicht immer verstanden – einer der Gründe für die Finanzkrise von 2008/09. Die in diesem Beitrag vorgestellten Kennzahlen zeigen, wie man Risiken mit erzielten oder möglichen Erträgen ins Verhältnis setzen kann.
Wege der Gewinnermittlung
(2017)
Macht ein Unternehmen Gewinn, heißt dies nicht notwendigerweise, dass alles „in trockenen Tüchern“ ist. Die entscheidende Frage ist, wie der Gewinn ermittelt wurde, denn nur mit dem richtigen Verfahren erhält man auch den geeigneten Blickwinkel – auf den Erfolg eines einzelnen Geschäfts, auf den Gewinn einer Periode, auf das Betriebsvermögen, auf die Liquidität oder auf die Bilanz.
EBIT & Co.
(2017)
Eine ganze Reihe von Kennzahlen wird in der Betriebswirtschaftslehre zur Ermittlung und Steuerung des Unternehmensgewinns verwendet. Doch nicht alle eignen sich für denselben Zweck. Je nach Fragestellung sollten unterschiedliche Kennzahlen herangezogen werden. Ihre Interpretation muss nicht zuletzt auch branchenspezifisch erfolgen.