Refine
Year of publication
- 2022 (11) (remove)
Document Type
Language
- English (11) (remove)
Has full text
- yes (11)
Is part of the Bibliography
- yes (11) (remove)
Institute
- Informatik (8)
- Life Sciences (1)
- Technik (1)
- Texoversum (1)
Publisher
- Hochschule Reutlingen (11) (remove)
Sleep analysis using a Polysomnography system is difficult and expensive. That is why we suggest a non-invasive and unobtrusive measurement. Very few people want the cables or devices attached to their bodies during sleep. The proposed approach is to implement a monitoring system, so the subject is not bothered. As a result, the idea is a non-invasive monitoring system based on detecting pressure distribution. This system should be able to measure the pressure differences that occur during a single heartbeat and during breathing through the mattress. The system consists of two blocks signal acquisition and signal processing. This whole technology should be economical to be affordable enough for every user. As a result, preprocessed data is obtained for further detailed analysis using different filters for heartbeat and respiration detection. In the initial stage of filtration, Butterworth filters are used.
This workshop addressed scientific research and development to acquire physiological signals, process signals, and extract relevant data for further analysis. There are very different domains of application, for example. Tiredness and drowsiness are responsible for a significant percentage of road accidents. There are different approaches to monitoring driver drowsiness, ranging from the driver’s steering behavior to in-depth analysis of the driver, e.g., eye tracking, blinking, yawning, or Electrocardiogram (ECG). One of the leading causes of road accidents in Egypt is trucks, buses, cars, motorcycles, and pedestrians, all sharing the same infrastructure. The result is that there are more than 12,000 fatalities in road accidents every year. Thousands are injured, and some suffer long-term disabilities. A similar effect can be observed in Germany for all types of vehicles. According to the Federal Statistical Office, a high percentage of accidents involving personal injury are directly or indirectly caused by drowsiness.
A different application domain is sleep monitoring: Healthy and sound sleep is a prerequisite for a rested mind and body. Both form the basis for physical and mental health. Healthy sleep is counteracted by sleep disorders, the medically diagnosed frequency of which increases sharply from the age of 40. Increasing acceptance can be promoted by monitoring vital signs during sleep over long periods through the exclusive use of noninvasive technologies. In the case of objective measurement, the vital signs are measured to calculate the sleep phases or sleep efficiency and, after applying the appropriate algorithms, to record the sleep quality. About a quarter of all Germans have the feeling of sleeping poorly. The disruptive factors include problems falling asleep or the subjective feeling that sleep is not restful. About half of those subjectively affected have consulted a doctor. Older people and people living alone are particularly affected. There is no doubt that sleep abnormalities can lead to poor performance throughout the day, physical/somatic illnesses, psychological problems, or even premature death. Prevention, early detection, and therapy support are relevant factors impacting the personal quality of life.
The presented approaches have different application domains but share standard methodologies and technologies. Cross-domain thinking and application are essential to successful data acquisition and processing, either with traditional or cutting-edge approaches.
Generating synthetic data is a relevant point in the machine learning community. As accessible data is limited, the generation of synthetic data is a significant point in protecting patients' privacy and having more possibilities to train a model for classification or other machine learning tasks. In this work, some generative adversarial networks (GAN) variants are discussed, and an overview is given of how generative adversarial networks can be used for data generation in different fields. In addition, some common problems of the GANs and possibilities to avoid them are shown. Different evaluation methods of the generated data are also described.
When wearing compressive garments, the tissue of the human body is altered in relation to its natural shape by the properties of the applied material and by the pattern construction used.
To check the fit of garments, both construction and selected materials can be virtually simulated in 3D on avatars in corresponding CAD programs before fabrication.
The software Blender allows the modelling of an avatar and to generate in respective to the different tissue zones with their specific properties to adjust them with soft body physics according to the testing of real soft tissue but the models in Blender are mainly using linear springs.
The importance of sleep for human life is enormous. It affects physical, mental, and psychological health. Therefore, it is vital to recognise sleep disorders in a timely manner in order to be able to initiate therapy. There are two methods for measuring sleep-related parameters - objective and subjective. Whether the substitution of a subjective method for an objective one is possible is investigated in this paper. Such replacement may bring several advantages, including increased comfort for the user. To answer this research question, a study was conducted in which 75 overnight recordings were evaluated. The primary purpose of this study was to compare both ways of measurement for total sleep time and sleep efficiency, which are essential parameters for, e.g., insomnia diagnosis and treatment. The evaluation results demonstrated that, on average, there are 32 minutes of difference between the two measurement methods when total sleep time is analysed. In contrast, on average, both measurement methods differ by 7.5% for sleep efficiency measurement. It should also be noted that people typically overestimate total sleep time and efficiency with the subjective method, where the perceived values are measured.
The purpose of this paper is to examine the effects of perceived stress on traffic and road safety. One of the leading causes of stress among drivers is the feeling of having a lack of control during the driving process. Stress can result in more traffic accidents, an increase in driver errors, and an increase in traffic violations. To study this phenomenon, the Stress Perceived Questionnaire (PSQ) was used to evaluate the perceived stress while driving in a simulation. The study was conducted with participants from Germany, and they were grouped into different categories based on their emotional stability. Each participant was monitored using wearable devices that measured their instantaneous heart rate (HR). The preference for wearable devices was due to their non-intrusive and portable nature. The results of this study provide an overview of how stress can affect traffic and road safety, which can be used for future research or to implement strategies to reduce road accidents and promote traffic safety.
Determination of accelerometer sensor position for respiration rate detection: initial research
(2022)
Continuous monitoring of a patient's vital signs is essential in many chronic illnesses. The respiratory rate (RR) is one of the vital signs indicating breathing diseases. This article proposes the initial investigation for determining the accelerometric sensor position of a non-invasive and unobtrusive respiratory rate monitoring system. This research aims to determine the sensor position in relation to the patient, which can provide the most accurate values of the mentioned physiological parameter. In order to achieve the result, the particular system setup, including a mechanical sensor holder construction was used. The breathing signals from 5 participants were analyzed corresponding to the relaxed state. The main criterion for selecting a suitable sensor position was each patient's average acceleration amplitude excursion, which corresponds to the respiratory signal. As a result, we provided one more defined important parameter for the considered system, which was not determined before.
Sleep is essential to existence, much like air, water, and food, as we spend nearly one-third of our time sleeping. Poor sleep quality or disturbed sleep causes daytime solemnity, which worsens daytime activities' mental and physical qualities and raises the risk of accidents. With advancements in sensor and communication technology, sleep monitoring is moving out of specialized clinics and into our everyday homes. It is possible to extract data from traditional overnight polysomnographic recordings using more basic tools and straightforward techniques. Ballistocardiogram is an unobtrusive, non-invasive, simple, and low-cost technique for measuring cardiorespiratory parameters. In this work, we present a sensor board interface to facilitate the communication between force sensitive resistor sensor and an embedded system to provide a high-performing prototype with an efficient signal-to-noise ratio. We have utilized a multi-physical-layer approach to locate each layer on top of another, yet supporting a low-cost, compact design with easy deployment under the bed frame.
Today many scientific works are using deep learning algorithms and time series, which can detect physiological events of interest. In sleep medicine, this is particularly relevant in detecting sleep apnea, specifically in detecting obstructive sleep apnea events. Deep learning algorithms with different architectures are used to achieve decent results in accuracy, sensitivity, etc. Although there are models that can reliably determine apnea and hypopnea events, another essential aspect to consider is the explainability of these models, i.e., why a model makes a particular decision. Another critical factor is how these deep learning models determine how severe obstructive sleep apnea is in patients based on the apnea-hypopnea index (AHI). Deep learning models trained by two approaches for AHI determination are exposed in this work. Approaches vary depending on the data format the models are fed: full-time series and window-based time series.
A MATLAB toolbox was developed both for teachers performing quick experimental demonstrations during lectures and for students practicing measurement and frequency analysis procedures. The conceptual purpose was to support fundamental acoustics courses with contents defined by the DEGA recommendation 102. All implemented functions and parameters are visible at once and quickly adjustable by a GUI without submenus. A user manual is provided with explanations of how to get started and how all implemented functions can be applied. The toolbox probably still contains bugs. All users are welcome to inform the author about their experiences and proposals for improvement. In future it is planned to convert "Acoustics" to the MATLAB app designer format as Mathworks announced GUIDE to be replaced. Useful extensions would be additional tabs containing animations of sound propagation phenomena or sound fields caused by different sources.