Refine
Document Type
- Conference proceeding (750) (remove)
Language
- English (750) (remove)
Has full text
- yes (750) (remove)
Is part of the Bibliography
- yes (750)
Institute
- Informatik (402)
- Technik (200)
- ESB Business School (124)
- Texoversum (15)
- Life Sciences (10)
- Zentrale Einrichtungen (2)
Publisher
- IEEE (221)
- Springer (112)
- Gesellschaft für Informatik e.V (40)
- Association for Computing Machinery (39)
- Hochschule Reutlingen (31)
- Association for Information Systems (23)
- SciTePress (20)
- IARIA (19)
- VDE Verlag (19)
- Elsevier (18)
Evaluation of a contactless accelerometer sensor system for heart rate monitoring during sleep
(2024)
The monitoring of a patient's heart rate (HR) is critical in the diagnosis of diseases. In the detection of sleep disorders, it also plays an important role. Several techniques have been proposed, including using sensors to record physiological signals that are automatically examined and analysed. This work aims to evaluate using a contactless HR monitoring system based on an accelerometer sensor during sleep. For this purpose, the oscillations caused by chest movements during heart contractions are recorded by an installation mounted under the bed mattress. The processing algorithm presented in this paper filters the signals and determines the HR. As a result, an average error of about 5 bpm has been documented, i.e., the system can be considered to be used for the forecasted domain.
Determination of accelerometer sensor position for respiration rate detection: initial research
(2022)
Continuous monitoring of a patient's vital signs is essential in many chronic illnesses. The respiratory rate (RR) is one of the vital signs indicating breathing diseases. This article proposes the initial investigation for determining the accelerometric sensor position of a non-invasive and unobtrusive respiratory rate monitoring system. This research aims to determine the sensor position in relation to the patient, which can provide the most accurate values of the mentioned physiological parameter. In order to achieve the result, the particular system setup, including a mechanical sensor holder construction was used. The breathing signals from 5 participants were analyzed corresponding to the relaxed state. The main criterion for selecting a suitable sensor position was each patient's average acceleration amplitude excursion, which corresponds to the respiratory signal. As a result, we provided one more defined important parameter for the considered system, which was not determined before.
The respiratory rate is a vital sign indicating breathing illness. It is necessary to analyze the mechanical oscillations of the patient's body arising from chest movements. An inappropriate holder on which the sensor is mounted, or an inappropriate sensor position is some of the external factors which should be minimized during signal registration. This paper considers using a non-invasive device placed under the bed mattress and evaluates the respiratory rate. The aim of the work is the development of an accelerometer sensor holder for this system. The normal and deep breathing signals were analyzed, corresponding to the relaxed state and when taking deep breaths. The evaluation criterion for the holder's model is its influence on the patient's respiratory signal amplitude for each state. As a result, we offer a non-invasive system of respiratory rate detection, including the mechanical component providing the most accurate values of mentioned respiratory rate.
The high system flexibility necessary for the full automation of complex and unstructured tasks leads to increased complexity, thus higher costs. On the other hand, the effectiveness and performance of such systems decrease, explaining the unfulfilled potential of robotcs in sectors such as intralogistics, where the benefits of a robotic solution rarely justify its costs. Taking the distance from the false idea that a task should be either fully automated, or fully manual, this aper presents a method for design of a lean human-robot interaction (HRI) withe the objective of the "right level of automation", where functions are divided among human and automated agends, so that the overall process gains in performances and/or costs. ... The 10 progressive steps of the method are presented and discussed with reference to their graphical tool: the House of Quality Interaction.
Compared to the automotive sector, where automation is the rule, in many other less standardized sectors automation is still the exception. This could soon hurt the productivity of industrialized countries, where the unemployment is low and the population is aging. Phenomena like the recent downfall in productivity, due to lockdowns and social distancing for prevention of health hazards during the COVID19 pandemic, only add to the problem. For these reasons, the relevance, motivation and intention for more automation in less standardized sectors has probably never been higher. However, available statistics say that providers and users of technologies struggle to bring more automation into action in automation-unfriendly sectors. In this paper, we present a decision support method for investment in automation that tackles the problem: the STIC analysis. The method takes a holistic and quantitative approach tying together technological, context-related and economic input parameters and synthetizing them in a final economic indicator. Thanks to the modelling of such parameters, it is possible to gain sensibility on the technological and/or process adjustments that would have the highest impact on the efficiency of the automation, thereby delivering value for both technology users and technology providers.
In this paper it is first identified the trade-off among costs, flexibility and performances of autonomous robotic solutions for material handling processes, where adding value with automation is not as trivial as in production processes: hence the requirement for automated solutions to be simple, lean and efficient becomes even stricter. Then a method for modelling and comparing differential performances and costs of manual and autonomous solutions is developed. As a result of the method, a smart man-machine collaborative interface is designed and its impact evaluated on a specific case of study. Results are then generalized and prove the strong conclusions that in unconstrained environments, where full standardization cannot be achieved, the risk of investing in autonomous solutions can only be mitigated by creating a fast and smart man-machine collaborative interface.
Planning of available resources considering ergonomics under deterministic highly variable demand
(2020)
In this paper, a method for hybrid short- to long-term planning of available resources for operations is presented, which is based on a known or deterministically forecasted but highly variable demand. The method considers quantitative measures such as the performance and the availability of resources, ergonomically relevant KPI and ultimately process costs in order to serve as a pragmatic planning tool for operations managers in SMEs. Specifically, the method enables exploiting the ergonomic advantages of available flexible automation technology (e.g. AGVs or picking robots), while assuring that these do not represent a capacity bottleneck. After presenting the method along with the necessary assumptions, mainly concerning the availability of data for the calculations, we report a case study that quantifies the impact of throughput variability on the selection of different process alternatives, where different teams of resources are used.
The paper focuses on a recently introduced paradigm for the logistic process of picking, with respect to the man-to-goods and goods-to-man concept: the robot to-goods. First the task and system architecture of the fast deployable autonomous commissioning system are described, then the economic efficiency of the system is analysed in a real business case scenario using a simplified method, which is explained and discussed. The clearly positive net present value of the investment and the short payback period obtained in the business case prove how the robot-to-goods paradigm for the commissioning process, implemented through the automation of the forklift platform, is economically attractive for small and medium size enterprises.
In standardized sectors such as the automotive, the cost-benefit ratio of automation solutions is high as they contribute to increase capacity, decrease costs and improve product quality. In less standardized application fields, the contribution of automation to improvements in capacity, cost and quality blurs. The automation of complex and unstructured tasks requires sophisticated, expensive and low-performing systems, whose impact on product quality is oftentimes not directly perceived by customers. As a result, the full automation of process chains in the general manufacturing or the logistic sectors is often a sub optimal solution. Taking the distance from the false idea that a process should be either fully automated, or fully manual, this paper presents a novel heuristic method for design of lean human-robot interaction, the Quality Interaction Function Deployment, with the objective of the “right level of automation”. Functions are divided among human and automated agents and several automation scenarios are created and evaluated with respect to their compliance to the requirements of all process´ stakeholders. As a result, synergies among operators (manual tasks) and machines (automated tasks) are improved, thus reducing time-losses and increasing productivity.
Powered by e-commerce and vital in the manufacturing industry, intralogistics became an increasingly important and labour-intensive process. In highly standardized automation-friendly environments, such as the automotive sector, most of efficiently automatable intralogistics tasks have already been automated. Due to aging population in EU and ergonomic regulations, the urge to automate intralogistics tasks became consistent also where product and process standardization is lower. That is the case of the production line or cell material supply process, where an increasing number of product variants and individually customized products combined with the necessary ability of reacting to changes in market conditions led to smaller and more frequent replenishment to the points of use in the production plant and to the chaotic addition of production cells in shop floor layout. This led in turn to inevitable traffic growth with unforeseeable related delays and increased level of safety threats and accidents. In this paper, we use the structured approach of the Quality Interaction Function Deployment to analyse the process of supply of assembly lines, seeking the most efficient combination of automation and manual labour, satisfying all stakeholders´ requirements. Results are presented and discussed.
According to a recent survey the great majority of players in logistics are planning to adopt one or more robotic solutions until 2019. Technical solutions for automation of processes in logistics are often available as a market-ready product, but the lack of standardization and skepticism towards long term investments are often the reasons why these solutions are not implemented on a large scale. This paper is set to bridge the gap between the world of technologies and the one of applications in order to help investors, robot producers and system integrators to decide on which branch of logistics to set their focus. The three main branches Courier Express Parcel (CEP), contract logistics and production logistics are briefly defined and distinguished through their characteristic factors and parameters. Then a method based on the analysis of three parameters (operative costs, required performance and flexibility) in the three branches is set to identify the most convenient branch of logistics for investing in new technologies, namely the one in which the risk of investment is lower, the return is higher and faster. The conclusion of the method shows that higher labor costs, strict regulations and higher standardization make the production logistics the most suitable branch for investments in emerging automation solutions.
The high system flexibility necessary for the full automation of complex and unstructured tasks leads to increased technological complexity, thus to higher costs and lower performance. In this paper, after an introduction to the different dimensions of flexibility, a method for flexible modular configuration and evaluation of systems of systems is introduced. The method starts from process requirements and, considering factors such as feasibility, development costs, market potential and effective impact on the current processes, enables the evaluation of a flexible systems of systems equipped with the needed functionalities before its actual development. This allows setting the focus on those aspects of flexibility that add market value to the system, thus promoting the efficient development of systems addressed to interested customers in intralogistics. An example of application of the method is given and discussed.
Distraction of the driver is one of the most frequent causes for car accidents. We aim for a computational cognitive model predicting the driver’s degree of distraction during driving while performing a secondary task, such as talking with co-passengers. The secondary task might cognitively involve the driver to differing degrees depending on the topic of the conversation or the number of co-passengers. In order to detect these subtle differences in everyday driving situations, we aim to analyse in-car audio signals and combine this information with head pose and face tracking information. In the first step, we will assess driving, video and audio parameters reliably predicting cognitive distraction of the driver. These parameters will be used to train the cognitive model in estimating the degree of the driver’s distraction. In the second step, we will train and test the cognitive model during conversations of the driver with co-passengers during active driving. This paper describes the work in progress of our first experiment with preliminary results concerning driving parameters corresponding to the driver’s degree of distraction. In addition, the technical implementation of our experiment combining driving, video and audio data and first methodological results concerning the auditory analysis will be presented. The overall aim for the application of the cognitive distraction model is the development of a mobile user profile computing the individual distraction degree and being applicable also to other systems.
This paper introduces a novel placement methodology for a common-centroid (CC) pattern generator. It can be applied to various integrated circuit (IC) elements, such as transistors, capacitors, diodes, and resistors. The proposed method consists of a constructive algorithm which generates an initial, close to the optimum, solution, and an iterative algorithm which is used subsequently, if the output of constructive algorithm does not satisfy the desired criteria. The outcome of this work is an automatic CC placement algorithm for IC element arrays. Additionally, the paper presents a method for the CC arrangement evaluation. It allows for evaluating the quality of an array, and a comparison of different placement methods.
The hotspot detection has received much attention in the recent years due to a substantial mismatch between lithography wavelength and semiconductor technology feature size. This mismatch causes diffraction when transferring the layout from design onto a silicon wafer. As a result, open or short circuits (i.e. lithography hotspots) are more likely to be produced. Additionally, increasing numbers of semiconductors devices on a wafer required more time for the lithography hotspot detection analysis. In this work, we propose a fast and accurate solution based on novel artificial neural network (ANN) architecture for precise lithography hotspot detection using a convolution neural network (CNN) adopting a state of-the-art technique. The experimental results showed that the proposed model gained accuracy improvement over current state-of-theart approaches. The final code has been made publicly available.
The article pleads for Education for Sustainable Development (ESD) in the textile and fashion sector and shows possibilities how this can be implemented from elementary school to higher education and vocational training. It begins by highlighting the non-sustainable practices and deficits that can be found in the fashion and textile sector worldwide and explains the sustainability goals in the context of the UN Roadmap ESD for 2030. In order to raise the awareness for sustainability and implement these goals, education is needed. The article introduces the concept of ESD as a guiding principle with the core element design competence, implemented by the interdisciplinary method of Design Thinking (DT). In order to successfully teach the ESD-relevant design competence, various didactic principles are required. It can be shown that they are very similar to the principles and phases of DT. Within a research project DT and its potential for implementing ESD has been investigated in teaching-learning situations at elementary schools as well as in an interdisciplinary seminar for student teachers. These findings have been transferred to the EU project Fashion DIET, which pursues the goal of implementing ESD in the textile and fashion sector. By means of an online pilot workshop, the methods and principles of DT were presented and explained to lecturers, teachers and educators, who gave their feedback on the potential of DT as a method to implement ESD as a guiding principle in their curricula.
The shift of populations to cities is creating challenges in many respects, thus leading to increasing demand for smart solutions of urbanization problems. Smart city applications range from technical and social to economic and ecological. The main focus of this work is to provide a systematic literature review of smart city research to answer two main questions: (1) How is current research on smart cities structured? And (2) What directions are relevant for future research on smart cities? To answer these research questions, a text-mining approach is applied to a large number of publications. This provides an overview and gives insights into relevant dimensions of smart city research. Although the main dimensions of research are already described in the literature, an evaluation of the relevance of such dimensions is missing. Findings suggest that the dimensions of environment and governance are popular, while the dimension of economy has received only limited attention.
The increasing urban population growth leads to challenges in cities in many aspects: Urbanisation problems such as excessive environmental pollution or increasing urban traffic demand new and innovative solutions. In this context, the concept of smart cities is discussed. An enabling element of the smart city concept is applying information technology (IT) to improve administrative efficiency and quality of life while reducing costs and resource consumption and ensuring greater citizen participation in administrative and urban development issues. While these smart city services are technologically studied and implemented, government officials, citizens or businesses are often unaware of the large variety of smart city service solutions. Therefore, this work deals with developing a smart city services catalogue that documents best practice services to create a platform that brings citizens, city government, and businesses together. Although the concept of IT service catalogues is not new and guidelines and recommendations for the design and development of service catalogues already exist in the corporate context, there is little work on smart city service catalogues. Therefore, approaches from agile software development and pattern research were adapted to develop the smart city service catalogue platform in this work.
Smart cities are considered data factories that generate an enormous amount of data from various sources. In fact data is the backbone of any smart services. Therefore, the strategic beneficial handling of this digital capital is crucial for cities. Some smart city pioneers have already written down their approach to data in the form of data strategies, but what should a city's data strategy include, and how can the goals and measures defined in the strategies be operationalized? This paper addresses these questions by looking closely at the data strategies of cities in Germany and the top three countries in the EU Digital Economy and Society Index. The in-depth analysis of 8 city data strategies has yielded 11 dimensions that cities should consider in their data strategy. These are relevance of data, principles, methods, data sharing, technology, data culture, data ethics, organizational structure, data security and privacy, collaborations, data literacy. In addition, data governance is a concept to put these 11 strategic dimensions into practice through standardization measures, training programs, and defining roles and responsibilities by developing a data catalog.
Data governance have been relevant for companies for a long time. Yet, in the broad discussion on smart cities, research on data governance in particular is scant, even though data governance plays an essential role in an environment with multiple stakeholders, complex IT structures and heterogeneous processes. Indeed, not only can a city benefit from the existing body of knowledge on data governance, but it can also make the appropriate adjustments for its digital transformation. Therefore, this literature review aims to spark research on urban data governance by providing an initial perspective for future studies. It provides a comprehensive overview of data governance and the relevant facets embedded in this strand of research. Furthermore, it provides a fundamental basis for future research on the development of an urban data governance framework.
Patterns are virtually simulated in 3D CAD programs before production to check the fit. However, achieving lifelike representations of human avatars, especially regarding soft tissue dynamics, remains challenging. This is mainly since conventional avatars in garment CAD programs are simulated with a continuous hard surface and not corresponding to the human physical and mechanical body properties of soft tissue. In the real world, the human body’s natural shape is affected by the contact pressure of tight-fitting textiles. To verify the fit of a simulated garment, the interactions between the individual body shape and the garment must be considered. This paper introduces an innovative approach to digitising the softness of human tissue using 4D scanning technology. The primary objective of this research is to explore the interactions between tissue softness and different compression levels of apparel, exerting pressure on the tissue to capture the changes in the natural shape. Therefore, to generate data and model an avatar with soft body physics, it is essential to capture the deform ability and elasticity of the soft tissue and map it into the modification options for a simulation. To aim this, various methods from different fields were researched and compared to evaluate 4D scanning as the most suitable method for capturing tissue deformability in vivo. In particular, it should be considered that the human body has different deformation capabilities depending on age, the amount of muscle and body fat. In addition, different tissue zones have different mechanical properties, so it is essential to identify and classify them to back up these properties for the simulation. It has been shown that by digitising the obtained data of the different defined applied pressure levels, a prediction of the deformation of the tissue of the exact person becomes possible. As technology advances and data sets grow, this approach has the potential to reshape how we verify fit digitally with soft avatars and leverage their realistic soft tissue properties for various practical purposes.
The process for the production of customized bras is really challenging. Although the need is very clear, the lingerie industry is currently facing a lack of data, knowledge and expertise for the realization of an automated process chain. Different studies and surveys have shown, that the majority of women wear the incorrect bra size. In addition to aesthetic problems, health risks such as headaches, back problems or digestive problems of the wearers can result from this. An important prerequisite for improvements is the basic knowledge about the female breast, both in terms of body measurements and different breast shapes. The current size systematic for bras only defines a bra size by the relation between bust girth and underbust girth and standardized cup forms do not justice to the high variability of the human body. As the bra type shapes the female breast, basic knowledge about the relation of measurements and shapes from the clothed and the unclothed breast is missing.
In the present project, studies are conducted to explore the female breast and to derive new breast-specific body measurements, different breast shapes and deformation knowledge using existing bras.
Furthermore, an innovative process is being developed that leads from 3D scanning to individual and interactive pattern construction, which allows an automatic pattern creation based on individual body measurements and the influence of different material parameters.
In the course of the presentation, the current project status will be shown and the future developments and project steps will be introduced.
When wearing compressive garments, the tissue of the human body is altered in relation to its natural shape by the properties of the applied material and by the pattern construction used.
To check the fit of garments, both construction and selected materials can be virtually simulated in 3D on avatars in corresponding CAD programs before fabrication.
The software Blender allows the modelling of an avatar and to generate in respective to the different tissue zones with their specific properties to adjust them with soft body physics according to the testing of real soft tissue but the models in Blender are mainly using linear springs.
Human pose estimation (HPE) is integral to scene understanding in numerous safety-critical domains involving human-machine interaction, such as autonomous driving or semi-automated work environments. Avoiding costly mistakes is synonymous with anticipating failure in model predictions, which necessitates meta-judgments on the accuracy of the applied models. Here, we propose a straightforward human pose regression framework to examine the behavior of two established methods for simultaneous aleatoric and epistemic uncertainty estimation: maximum a-posteriori (MAP) estimation with Monte-Carlo variational inference and deep evidential regression (DER). First, we evaluate both approaches on the quality of their predicted variances and whether these truly capture the expected model error. The initial assessment indicates that both methods exhibit the overconfidence issue common in deep probabilistic models. This observation motivates our implementation of an additional recalibration step to extract reliable confidence intervals. We then take a closer look at deep evidential regression, which, to our knowledge, is applied comprehensively for the first time to the HPE problem. Experimental results indicate that DER behaves as expected in challenging and adverse conditions commonly occurring in HPE and that the predicted uncertainties match their purported aleatoric and epistemic sources. Notably, DER achieves smooth uncertainty estimates without the need for a costly sampling step, making it an attractive candidate for uncertainty estimation on resource-limited platforms.
Competing logics in evaluating employee performance : building compromises through conventions
(2015)
Current research argues that competing institutional logistics1 can co-exist enduringly and investigates how organizations cope with such institutional complexity (Greenwood et al. 2011). Thereby, the role of practices for handling competing logics has been overlooked and it is currently only to limited extent understood how organizations establish compromises between competing logics. Therefore, we investigated the recent performance appraisal reform of a German public sector organization that occurred in 2008 (see also Kozica, Brandl 2015). BAND (the pseudonym for our organization) has been using performance appraisals for several decades, and performance appraisals have already become entrenched instruments (Zeitz, Mittal, McAulay 1999) for handling staff promotion decisions. While BAND accepted the accountability logic of the performance appraisal, the professional logic (which is based on trust and comradeship as a high value of being professional in our organization) is accepted too and BAND has established a fine-grained compromise between the different logics. During the recent reform of the performance appraisal system, however, this compromise has broken up and challenged organizational members to (re-)arrange a compromise. By using French convention school of thinking (Boltanski, Thévenot 2006) we address how BAND copes with conflicting logics by forming compromises in organizational practices. Thereby, we show that the concept of convention is particularly promising for understanding of how organizations deal with institutional complexity. More broadly, our argument contributes to the elaboration of an organizational theory for the institutional logics discussion that explains how organizational and individual actions are interlinked.
Imagine a world in which the search for tomorrow's trends of (software) products is not subject to a long and laborious data search but is possible with a single mouse click. Through the use of artificial intelligence (AI), this reality is made possible and is to be further advanced through research. The study therefore aims to provide an initial overview of the young research field. Based on research, expert interviews, company and student surveys, current application possibilities of AI in the innovation process (defined as Smart Innovation), existing challenges that slow down the further development are discussed in more detail and future application possibilities are presented. Finally, a recommendation for action is made for business, politics and science to help overcome the current obstacles together and thus drive the future of Smart Innovation.
Reliable and accurate car driver head pose estimation is an important function for the next generation of advanced driver assistance systems that need to consider the driver state in their analysis. For optimal performance, head pose estimation needs to be non-invasive, calibration-free and accurate for varying driving and illumination conditions. In this pilot study we investigate a 3D head pose estimation system that automatically fits a statistical 3D face model to measurements of a driver’s face, acquired with a low-cost depth sensor on challenging real-world data. We evaluate the results of our sensor-independent, driver-adaptive approach to those of a state-of-the-art camera-based 2D face tracking system as well as a non-adaptive 3D model relative to own ground-truth data, and compare to other 3D benchmarks. We find large accuracy benefits of the adaptive 3D approach.
Teaching at assembly workstations in production in SMEs (small and medium sized companies) often does not take place at all or only insufficiently. In addition to the lack of technical content, there are also aggravatingly incorrect movement sequences from an ergonomic point of view, which "untrained" people usually automatically acquire. An AI based approach is used to analyze a definite workflow for a specific assembly scope regarding the behavior of several employees. Based on these different behaviors, the AI gives feedback at which points in time, work steps and movement’s particularly dangerous incorrect postures occur. Motion capturing and digital human model simulation in combination with the results of the AI define the optimized workflow. Individual employees can be trained directly due to the fact that AI identifies their most serious incorrect postures and provide them with a direct analogy of their “wrong” posture and “easy on the joints posture”. With the assistance of various test persons, the AI can conduct a study in which the most frequently occurring incorrect postures can be identified. This could be realized in general or tailored to specific groups of people (e.g. "People over 1.90m tall must be particularly careful not to make the following mistake...). The approach will be tested and validated at the Werk150, the factory of the ESB Business School, on the campus of the Reutlingen University. The new gained knowledge will be used subsequently for training in SMEs.
Lots of movies are produced every year, too many to watch all of them and in particular, to get an overview about the evolution of typical movie genres and actors playing in them. Moreover, it is a challenging problem to detect correlations among the movies and the actors in those movies, in particular, if we are interested in time-varying data patterns like trends, countertrends, or anomalies and outliers. Those correlations are specifically interesting if they can be inspected on different levels of granularity, e.g., temporal, but also hierarchical in form of country- or continent-based correlations. In this paper we describe the IMDb Explorer, a webbased visualization tool that consists of two major views denoted by the movie cosmos and the career lines. Both views are linked and interactively manipulable while a list of user-defined metrics are explorable. We illustrate the usefulness of the visualization tool by applying it to the entire movie database provided by IMDb.
Painting galleries typically provide a wealth of data composed of several data types. Those multivariate data are too complex for laymen like museum visitors to first, get an overview about all paintings and to look for specific categories. Finally, the goal is to guide the visitor to a specific painting that he wishes to have a more closer look on. In this paper we describe an interactive visualization tool that first provides such an overview and lets people experiment with the more than 41,000 paintings collected in the web gallery of art. To generate such an interactive tool, our technique is composed of different steps like data handling, algorithmic transformations, visualizations, interactions, and the human user working with the tool with the goal to detect insights in the provided data. We illustrate the usefulness of the visualization tool by applying it to such characteristic data and show how one can get from an overview about all paintings to specific paintings.
We present a multitask network that supports various deep neural network based pedestrian detection functions. Besides 2D and 3D human pose, it also supports body and head orientation estimation based on full body bounding box input. This eliminates the need for explicit face recognition. We show that the performance of 3D human pose estimation and orientation estimation is comparable to the state-of-the-art. Since very few data sets exist for 3D human pose and in particular body and head orientation estimation based on full body data, we further show the benefit of particular simulation data to train the network. The network architecture is relatively simple, yet powerful, and easily adaptable for further research and applications.
Model-guided Therapy and Surgical Workflow Systems are two interrelated research fields, which have been developed separately in the last years. To make full use of both technologies, it is necessary to integrate them and connect them to Hospital Information Systems. We propose a framework for integration of Model-guided Therapy in Hospital Information Systems based on the Electronic Medical Record, and a taskbased Workflow Management System, which is suitable for clinical end users. Two prototypes - one based on Business Process Modeling Language, one based on the serum-board - are presented. From the experience with these prototypes, we developed a novel personalized visualization system for Surgical Workflows and Model-guided Therapy. Key challenges for further development are automated situation detection and a common communication infrastructure.
Multi-dimensional patient data, such as time varying volume data, data of different imaging modalities, surface segmentations etc. are of growing importance in the clinical routine. For many use cases, it is of major importance to replicate a certain visualization of a data set created on one machine on a different computer using different software tools. Up until now, there exists no standardized methodology for this consistent presentation. We propose an extension of the Digital Imaging und Communications in Medicine (DICOM) called “Multi dimensional Presentation State” and outline scope and first results of the standardization process.
Framework for integrating intelligent product structures into a flexible manufacturing system
(2023)
Increasing individualisation of products with a high variety and shorter product lifecycles result in smaller lot sizes, increasing order numbers, and rising data and information processing for manufacturing companies. To cope with these trends, integrated management of the products and manufacturing information is necessary through a “product-driven” manufacturing system. Intelligent products that are integrated as an active element within the controlling and planning of the manufacturing process can represent flexibility advantages for the system. However, there are still challenges regarding system integration and evaluation of product intel-ligence structures. In light of these trends, this paper proposes a conceptual frame-work for defining, analysing, and evaluating intelligent products using the example of an assembly system. This paper begins with a classification of the existing problems in the assembly and a definition of the intelligence level. In contrast to previous approaches, the analysis of products is expanded to five dimensions. Based on this, a structured evaluation method for a use case is presented. The structure of solving the assembly problem is provided by the use case-specific ontology model. Results are presented in terms of an assignment of different application areas, linking the problem with the target intelligence class and, depending on the intelligence class of the product, suggesting requirements for implementation. The conceptual frame-work is evaluated by utilising a case study in a learning factory. Here, the model-mix assembly is controlled actively by the workpiece carrier in terms of transferring the variant-specific work instructions to the operator and the collaborative robot (cobot) at the workstations. The resulting system thus enables better exploitation of the poten-tials through less frequent errors and shorter search times. Such an implementation has demonstrated that the intelligent workpiece carrier represents an additional part for realising a cyber-physical production system (CPPS).
This study describes a non-contact measuring and system identification procedure for evaluating inhomogeneous stiffness and damping characteristics of the annular ligament in the physiological amplitude and frequency range without the application of large static external forces that can cause unnatural displacements of the stapes. To verify the procedure, measurements were first conducted on a steel beam. Then, measurements on an individual human cadaveric temporal bone sample were performed. The estimated results support the inhomogeneous stiffness and damping distribution of the annular ligament and are in a good agreement with the multiphoton microscopy results which show that the posterior-inferior corner of the stapes footplate is the stiffest region of the annular ligament.
This study describes a non-contact measuring and parameter identification procedure designed to evaluate inhomogeneous stiffness and damping characteristics of the annular ligament in the physiological amplitude and frequency range without the application of large static external forces that can cause unnatural displacements of the stapes. To verify the procedure, measurements were first conducted on a steel beam. Then, measurements on an individual human cadaveric temporal bone sample were performed. The estimated results support the inhomogeneous stiffness and damping distribution of the annular ligament and are in a good agreement with the multiphoton microscopy results which show that the posterior-inferior corner of the stapes footplate is the stiffest region of the annular ligament. This method can potentially help to establish a correlation between stiffness and damping characteristics of the annular ligament and inertia properties of the stapes and, thus, help to reduce the number of independent parameters in the model-based hearing diagnosis.
The supply of customer-specific products is leading to the increasing technical complexity of machines and plants in the manufacturing process. In order to ensure the availability of the machines and plants, maintenance is considered as an essential key. The application of cyber-physical systems enables the complexity to be mastered by improving the availability of information, implementing predictive maintenance strategies and the provision of all relevant information in real-time. The present research project deals with the development of a cost-effective and retrofittable smart maintenance system for the application of ultraviolet (UV) lamps. UV lamps are used in a variety of applications such as curing of materials and water disinfection, where UV lamps are still used instead of UV LED due to their higher effectiveness. The smart maintenance system enables continuous condition monitoring of the UV lamp through the integration of sensors. The data obtained are compared with data from existing lifetime models of UV lamps to provide information about the remaining useful lifetime of the UV lamp. This ensures needs-based maintenance measures and more efficient use of UV lamps. Furthermore, it is important to have accurate information on the remaining useful lifetime of a UV lamp, as the unplanned breakdown of a UV lamp can have far-reaching consequences. The key element is the functional model of the envisioned cyber-physical system, describing the dependencies between the sensors and actuator, the condition monitoring system as well as the IoT platform. Based on the requirements developed and the functional model, the necessary hardware and software are selected. Finally, the system is developed and retrofitted to a simulated curing process of a 3D printer to validate its functional capability. The developed system leads to improved information availability of the condition of UV lamps, predictive maintenance measures and context-related provision of information.
Motivation: Aim of this project is the automatic classification of total hip endoprosthesis (THEP) components in 2D Xray images. Revision surgeries of total hip arthroplasty (THA) are common procedures in orthopedics and trauma surgery. Currently, around 400.000 procedures per year are performed in the United States (US) alone. To achieve the best possible result, preoperative planning is crucial. Especially if parts of the current THEP system are to be retained.
Methods: First, a ground truth based on 76 X-ray images was created: We used an image processing pipeline consisting of a segmentation step performed by a convolutional neural network and a classification step performed by a support vector machine (SVM). In total, 11 classes (5 pans and 6 shafts) shall be classified.
Results: The ground truth generated was of good quality even though the initial segmentation was performed by technicians. The best segmentation results were achieved using a U-net architecture. For classification, SVM architectures performed much better than additional neural networks.
Conclusions: The overall image processing pipeline performed well, but the ground truth needs to be extended to include a broader variability of implant types and more examples per training class.
Executive education in IS is under the scrutiny of many institution for the potential to bring in financial revenues. However teaching executives can be a very challenging task because of the previous experiences, variation in their previous education, and multiplicity of motivations for pursuing a continuous education. The panel aims at sharing successful experiences and highlighting challenges of dealing with executive audiences. The panel will present the results of a large survey among executive students and identify the three most significant elements emerged from the survey: the importance of theory that is actionable, the importance of varied pedagogical tools and practices, and the importance of relevance beyond practical tools. Based on a survey that will be distributed to the audience at the beginning of the panel, the audience will be actively engaged in sharing their experiences on the three topics aiming at capitalize and sum up the collective knowledge of the room.
The diversity of energy prosumer types makes it difficult to create appropriate incentive mechanisms that satisfy both prosumers and energy system operators alike. Meanwhile, European energy suppliers buy guarantees of origin (GoO) which allow them to sell green energy at premium prices while in reality delivering grey energy to their customers. Blockchain technology has proven itself to be a robust paying system in which users transact money without the involvement of a third party. Blockchain tokens can be used to represent a unit of energy and, just as GoOs, be submitted to the market. This paper focuses on simulating marketplace using the ethereum blockchain and smart contracts, where prosumers can sell tokenized GoOs to consumers willing to subsidize renewable energy producers. Such markets bypass energy providers by allowing consumers to obtain tokenized GoOs directly from the producers, which in turn benefit directly from the earnings. Two market strategies where tokens are sold as GoOs have been simulated. In the Fix Price Strategy prosumers sell their tokens to the average GoO price of 2014. The Variable Price Strategy focuses on selling tokens at a price range defined by the difference between grey and green energy. The study finds that the ethereum blockchain is robust enough to functions as a platform for tokenized GoO trading. Simulation results have been compared and the results indicate that prosumers earn significantly more money by following the Variable Price
Strategy.
This paper addresses the turn-on switching process of insulated-gate bipolar transistor (IGBT) modules with anti-parallel free-wheeling diodes (FWD) used in inductive load switching power applications. An increase in efficiency, i.e. decrease in switching losses, calls for a fast switching process of the IGBT, but this commonly implies high values of the reverse-recovery current overshoot. To overcome this undesired behaviour, a solution was proposed which achieves an independent control of the collector current slope and peak reverse recovery current by applying a gate current that is briefly turned negative during the turn-on process. The feasibility of this approach has already been shown, however, a sophisticated control method is required for applying it in applications with varying currents, temperature and device parameters. In this paper a solution based on an adaptive, iterative closed-loop ontrol is proposed. Its effectiveness is demonstrated by experimental results from a 1200 V/200A IGBT power module for different load currents and reverse-recovery current overshoots.
The digitization of factories will be a significant issue for the 2020s. New scenarios are emerging to increase the efficiency of production lines inside the factory, based on a new generation of robots’ collaborative functions. Manufacturers are moving towards data-driven ecosystems by leveraging product lifecycle data from connected goods. Energy-efficient communication schemes, as well as scalable data analytics, will support these various data collection scenarios. With augmented reality, new remote services are emerging that facilitate the efficient sharing of knowledge in the factory. Future communication solutions should generally ensure connectivity between the various production sites spread worldwide and new players in the value chain (e.g., suppliers, logistics) transparent, real-time, and secure. Industry 4.0 brings more intelligence and flexibility to production. Resulting in more lightweight equipment and, thus, offering better ergonomics. 5G will guarantee real-time transmissions with latencies of less than 1 ms. This will provide manufacturers with new possibilities to collect data and trigger actions automatically.
Development of an IoT-based inventory management solution and training module using smart bins
(2023)
Flexibility, transparency and changeability of warehouse environments are playing an increasingly important role to achieve a cost-efficient production of small batch sizes. This results in increasing requirements for warehouses in terms of flexibility, scalability, reconfigurability and transparency of material and information flows to deal with large number of different components and variable material and information flows due to small batch sizes. Therefore, an IoT-based inventory management solution and training module has been developed, implemented and validated at Werk150 – the Factory on campus of the ESB Business School. Key elements of the developed solution are smart bins using weight mats to track the bin’s content and additional sensors and buttons which are connected to an IoT – Hub to collect data of material consumption and manual handling operations. The use of weight mats for the smart bins offers the possibility to measure the container content independent of the specific component geometry and thus for a variety of components based on the specific component weights. The developed solution enables focusing on key for success elements of the system to provide synchronization of the flow of materials and information resulting an increase of flexibility and significantly higher transparency of the material flow. AIbased algorithms are applied to analyse the gathered data and to initiate process optimizations by providing the logistics decision makers a profound and transparent basis for decision making. In order to provide students and industry visitors of the learning factory with the necessary competences and to support the transfer into practice, a training module on IoT-based inventory management was developed and implemented.
Clinical reading centers provide expertise for consistent, centralized analysis of medical data gathered in a distributed context. Accordingly, appropriate software solutions are required for the involved communication and data management processes. In this work, an analysis of general requirements and essential architectural and software design considerations for reading center information systems is provided. The identified patterns have been applied to the implementation of the reading center platform which is currently operated at the Center of Ophthalmology of the University Hospital of Tübingen.
The presented research is dedicated to estimation of the correlation between the level of renewable energy sources and the costs of congestion management in electric networks in selected European countries. Data of six countries in North-West European area (Italy, Spain, Germany, France, Poland and Austria) were investigated. Factors considered included grid congestion costs including re-dispatching costs as well as countertrading costs, gross electricity generation, installed capacity of electric generating facilities, installed capacity of electric non-dispatchable renewable energy sources and total electricity consumption. Special attention is paid to the share of renewable energy sources. It is found that the grid congestion costs are not clearly affected by penetration of non-dispatchable renewables in all the analysed countries and therefore a clear mathematical correlation cannot no be extrapolated with the available data. The results of this research show in general a loose dependency of the grid congestion costs on the penetration of renewables and a strong dependency on the total electrical consumption of the country.
This paper aims at presenting a solution that enables end customers of the energy system to participate in new local micro-energy-markets by providing them with a distributed, decentralized, transparent and secure Peer to Peer (P2P) payment system, which functions automatically applying new concepts of Machine to Machine (M2M) communication technologies. This work was performed within the German project VK_2G, funded by the DBU. The key results were: Providing means to perform microtransactions in a P2P fashion between end consumers and prosumers in local communities at low cost in a transparent and secure manner; Developing a platform with pre-defined smart contracts able to be tailored to different end customers ‘needs in an easy way and; Integrating both the market platform as well as the local control of generation and loads. This solution has been developed, integrated and tested in a laboratory prototype. This paper discusses this solution and presents the results of the first test.
In a world with rapidly changing customer requirements and the increased role of technology, companies need more flexible systems to adapt their processes and react dynamically to changes. Adaptive Case Management (ACM) comes into consideration by providing a concept to adapt to changing business conditions. Within our research project we did a first foundational evaluation of the potential of ACM in supporting unpredictable sales processes. Based on a set of criteria we tested the concept of ACM with the open source tool Cognoscenti. The evaluation gave us the possibility to experience the concept of ACM. Hence we were able to provide a statement about the potential of ACM within the context of an unpredictable sales process, setting the path to further research and discussion of ACM in the area of sales processes.
The ballistocardiography is a technique that measures the heart rate from the mechanical vibrations of the body due to the heart movement. In this work a novel noninvasive device placed under the mattress of a bed estimates the heart rate using the ballistocardiography. Different algorithms for heart rate estimation have been developed.