Refine
Year of publication
- 2020 (144) (remove)
Document Type
- Journal article (144) (remove)
Is part of the Bibliography
- yes (144)
Institute
- ESB Business School (67)
- Life Sciences (41)
- Informatik (24)
- Technik (12)
Publisher
- Elsevier (29)
- De Gruyter (13)
- MDPI (13)
- Springer (9)
- Wiley (8)
- MIM, Marken-Institut München (5)
- Sage Publishing (3)
- Taylor & Francis (3)
- Tech Science Press (3)
- Thexis Verlag (3)
With the expansion of cyber-physical systems (CPSs) across critical and regulated industries, systems must be continuously updated to remain resilient. At the same time, they should be extremely secure and safe to operate and use. The DevOps approach caters to business demands of more speed and smartness in production, but it is extremely challenging to implement DevOps due to the complexity of critical CPSs and requirements from regulatory authorities. In this study, expert opinions from 33 European companies expose the gap in the current state of practice on DevOps-oriented continuous development and maintenance. The study contributes to research and practice by identifying a set of needs. Subsequently, the authors propose a novel approach called Secure DevOps and provide several avenues for further research and development in this area. The study shows that, because security is a cross-cutting property in complex CPSs, its proficient management requires system-wide competencies and capabilities across the CPSs development and operation.
Different types of raw cotton were investigated by a commercial ultraviolet-visible/near infrared (UV-Vis/NIR) spectrometer (210–2200 nm) as well as on a home-built setup for NIR hyperspectral imaging (NIR-HSI) in the range 1100–2200 nm. UV-Vis/NIR reflection spectroscopy reveals the dominant role proteins, hydrocarbons and hydroxyl groups play in the structure of cotton. NIR-HSI shows a similar result. Experimentally obtained data in combination with principal component analysis (PCA) provides a general differentiation of different cotton types. For UV-Vis/NIR spectroscopy, the first two principal components (PC) represent 82 % and 78 % of the total data variance for the UV-Vis and NIR regions, respectively. Whereas, for NIR-HSI, due to the large amount of data acquired, two methodologies for data processing were applied in low and high lateral resolution. In the first method, the average of the spectra from one sample was calculated and in the second method the spectra of each pixel were used. Both methods are able to explain ≥90 % of total variance by the first two PCs. The results show that it is possible to distinguish between different cotton types based on a few selected wavelength ranges. The combination of HSI and multivariate data analysis has a strong potential in industrial applications due to its short acquisition time and low-cost development. This study opens a novel possibility for a further development of this technique towards real large-scale processes.
Controlling the surface properties and structure of thin nanosized coatings is of primary importance in diverse engineering and medical applications. Here we report on how the nanostructure, growth mechanism, thickness, roughness, and hydrophilicity of nanocomposites composed of weak natural or strong synthetic polyelectrolytes (PE) can be tailored by graphene oxide (GO) doping. GO reverses the build‐up mechanism affecting the internal structure and the hydrophilicity in a way depending on the type of the PE‐matrix. The extent of GO‐adsorption and its impact on the surface morphology was found to be independent on the type of the underlying PE‐matrix. The nanostructure of the hybrid films is not significantly altered when a single surface‐exposed GO‐layer is deposited, while increasing the number of embedded GO‐layers leads to pronounced surface heterogeneity. These results are expected to have valuable impact on the construction strategies of coatings with tunable surface properties.
Thermoplastic polycarbonate urethane elastomers (TPCU) are potential implant materials for treating degenerative joint diseases thanks to their adjustable rubber-like properties, their toughness, and their durability. We developed a water-containing high-molecular-weight sulfated hyaluronic acid-coating to improve the interaction of TPCU with the synovial fluid. It is suggested that trapped synovial fluid can act as a lubricant that reduces the friction forces and thus provides an enhanced abrasion resistance of TPCU implants. Aims of this work were (i) the development of a coating method for novel soft TPCU with high-molecular sulfated hyaluronic acid to increase the biocompatibility and (ii) the in vitro validation of the functionalized TPCUs in cell culture experiments.
Fabrikplanungsprozesse werden zunehmend durch räumlich und zeitlich verteilte Teams durchgeführt, die agiles Projektmanagement praktizieren. Voraussetzung für den Erfolg ist die Anwendung von Planungssystemen der Digitalen Fabrik sowie moderner Groupware zur Kommunikation, Koordination und Kooperation in den agilen Projektgruppen der jeweiligen Planungsphase. Es wird ein Konzept mit Implementierungshinweisen für einen zukunftsfähigen Fabrikplanungsprozess mit digitalen Systemen vorgestellt.
Die OLED-Technologie wurde vor über zehn Jahren als Revolution in der Verpackungs-industrie gefeiert, die jedoch in der Praxis ausblieb. In einem industriellen Kooperations-projekt zur Zukunftsszenarienentwicklung der pharmazeutischen Verpackungsindustrie stellt sich die OLED-Technologie als Schlüsseltechnologie für das Zukunftsszenario Smart Packaging 2.0 dar.
Die pharmazeutische Verpackungsindustrie ist durch umfangreiche Regularien geprägt und daher in der Innovationsdynamik etwas eingeschränkt. In einem sechsmonatigen Projekt zur Entwicklung von Zukunftsszenarien für die Pharmaverpackung wurde aufgezeigt, dass zwar neue Technologien, wie E-Labels oder Kindersicherungen, die Marktreife erreicht haben oder in Kürze erreichen werden, neue Anforderungen in absehbarer Zukunft aber weiteren Entwicklungsbedarf erfordern. Die pharmazeutische Verpackungsindustrie muss sich zusammen mit ihren Kunden und Technologielieferanten enger und intensiver austauschen, um die nächste Verpackungsgeneration, Smart Packaging 2.0, auf den Weg zu bringen.
Mangels durchgängiger Datenstandards für Planungssysteme der Digitalen Fabrik müssen systemspezifische Datenaustauschlösungen implementiert werden. Zur Unterstützung der Planung ist ein durchgängiger Fabrikplanungsprozess mit integrierter Routenplanung sowohl prozess- als auch systemtechnisch erforderlich. Dafür werden beispielhaft ein Fabrik- und ein Routenplanungssystem auf ihre Kompatibilität untersucht, erforderliche Anforderungen abgeleitet und eine Datenaustausch-möglichkeit für den Anwender aufgezeigt.
Introduction: Bioresorbable collagenous barrier membranes are used to prevent premature soft tissue ingrowth and to allow bone regeneration. For volume stable indications, only non-absorbable synthetic materials are available. This study investigates a new bioresorbable hydrofluoric acid (HF)-treated magnesium (Mg) mesh in a native collagen membrane for volume stable situations. Materials and Methods: HF-treated and untreated Mg were compared in direct and indirect cytocompatibility assays. In vivo, 18 New Zealand White Rabbits received each four 8 mm calvarial defects and were divided into four groups: (a) HF-treated Mg mesh/collagen membrane, (b) untreated Mg mesh/collagen membrane (c) collagen membrane and (d) sham operation. After 6, 12 and 18 weeks, Mg degradation and bone regeneration was measured using radiological and histological methods. Results: In vitro, HF-treated Mg showed higher cytocompatibility. Histopathologically, HF-Mg prevented gas cavities and was degraded by mononuclear cells via phagocytosis up to 12 weeks. Untreated Mg showed partially significant more gas cavities and a fibrous tissue reaction. Bone regeneration was not significantly different between all groups. Discussion and Conclusions: HF-Mg meshes embedded in native collagen membranes represent a volume stable and biocompatible alternative to the non-absorbable synthetic materials. HF-Mg shows less corrosion and is degraded by phagocytosis. However, the application of membranes did not result in higher bone regeneration.
Der Anteil mittelständischer Unternehmen, die Standorte im Ausland unterhalten, nimmt seit einigen Jahren zu. Oft finden Auslandsaktivitäten dieser Art in Niedriglohnländern statt. Dort ergeben sich u.a durch die infrastrukturellen Gegebenheiten und durch die verfügbaren Personalressourcen diverse Herausforderungen, insbesondere für die Produktivitätsermittlung und -bewertung innerhalb der Produktion. Dieser Beitrag soll für diese Herausforderungen geeignete Technologien und eine mögliche Vorgehensweise für deren Auswahl vor dem Hintergrund der ländertypischen Herausforderungen aufzeigen.
Development work within an experimental environment, in which certain properties are investigated and optimized, requires many test runs and is therefore often associated with long execution times, costs and risks. This can affect product, material and technology development in industry and research. New digital driver technologies offer the possibility to automate complex manual work steps in a cost-effective way, to increase the relevance of the results and to accelerate the processes many times over. In this context, this article presents a low-cost, modular and open-source machine vision system for test execution and evaluates it on the basis of a real industrial application. For this purpose a methodology for the automated execution of the load intervals, the process documentation and for the evaluation of the generated data by means of machine learning to classify wear levels. The software and the mechanical structure are designed to be adaptable to different conditions, components and for a variety of tasks in industry and research. The mechanical structure is required for tracking the test object and represents a motion platform with independent positioning by machine vision operators or machine learning. An evaluation of the state of the test object is performed by the transfer learning after the initial documentation run. The manual procedure for classifying the visually recorded data on the state of the test object is described for the training material. This leads to an increased resource efficiency on the material as well as on the personnel side since on the one hand the significance of the tests performed is increased by the continuous documentation and on the other hand the responsible experts can be assigned time efficiently. The presence and know-how of the experts are therefore only required for defined and decisive events during the execution of the experiments. Furthermore, the generated data are suitable for later use as an additional source of data for predictive maintenance of the developed object.
The evaluation of the effectiveness of different machine learning algorithms on a publicly available database of signals derived from wearable devices is presented with the goal of optimizing human activity recognition and classification. Among the wide number of body signals we choose a couple of signals, namely photoplethysmographic (optically detected subcutaneous blood volume) and tri-axis acceleration signals that are easy to be simultaneously acquired using commercial widespread devices (e.g. smartwatches) as well as custom wearable wireless devices designed for sport, healthcare, or clinical purposes. To this end, two widely used algorithms (decision tree and k-nearest neighbor) were tested, and their performance were compared to two new recent algorithms (particle Bernstein and a Monte Carlo-based regression) both in terms of accuracy and processing time. A data preprocessing phase was also considered to improve the performance of the machine learning procedures, in order to reduce the problem size and a detailed analysis of the compression strategy and results is also presented.
Das Internet der Dinge verändert die Customer-Experience nachhaltig, beispielsweise indem neue Dienste die Konsumenten kognitiv entlasten. Das Management sollte die neuen Interaktionsmöglichkeiten mit den Konsumenten nutzen und leistungsfähige Benutzerschnittstellen entwickeln sowie analytisches Know-how und Partnerschaften aufbauen.
The shift of populations to cities is creating challenges in many respects, thus leading to increasing demand for smart solutions of urbanization problems. Smart city applications range from technical and social to economic and ecological. The main focus of this work is to provide a systematic literature review of smart city research to answer two main questions: (1) How is current research on smart cities structured? and (2) What directions are relevant for future research on smart cities? To answer these research questions, a text-mining approach is applied to a large number of publications. This provides an overview and gives insights into relevant dimensions of smart city research. Although the main dimensions of research are already described in the literature, an evaluation of the relevance of such dimensions is missing. Findings suggest that the dimensions of environment and governance are popular, while the dimension of economy has received only limited attention.
Zero or plus energy office buildings must have very high building standards and require highly efficient energy supply systems due to space limitations for renewable installations. Conventional solar cooling systems use photovoltaic electricity or thermal energy to run either a compression cooling machine or an absorption-cooling machine in order to produce cooling energy during daytime, while they use electricity from the grid for the nightly cooling energy demand. With a hybrid photovoltaic-thermal collector, electricity as well as thermal energy can be produced at the same time. These collectors can produce also cooling energy at nighttime by longwave radiation exchange with the night sky and convection losses to the ambient air. Such a renewable trigeneration system offers new fields of applications. However, the technical, ecological and economical aspects of such systems are still largely unexplored.
In this work, the potential of a PVT system to heat and cool office buildings in three different climate zones is investigated. In the investigated system, PVT collectors act as a heat source and heat sink for a reversible heat pump. Due to the reduced electricity consumption (from the grid) for heat rejection, the overall efficiency and economics improve compared to a conventional solar cooling system using a reversible air-to-water heat pump as heat and cold source.
A parametric simulation study was carried out to evaluate the system design with different PVT surface areas and storage tank volumes to optimize the system for three different climate zones and for two different building standards. It is shown such systems are technically feasible today. With a maximum utilization of PV electricity for heating, ventilation, air conditioning and other electricity demand such as lighting and plug loads, high solar fractions and primary energy savings can be achieved.
Annual costs for such a system are comparable to conventional solar thermal and solar electrical cooling systems. Nevertheless, the economic feasibility strongly depends on country specific energy prices and energy policy. However, even in countries without compensation schemes for energy produced by renewables, this system can still be economically viable today. It could be shown, that a specific system dimensioning can be found at each of the investigated locations worldwide for a valuable economic and ecological operation of an office building with PVT technologies in different system designs.
Here, we report the continuous peroxide-initiated grafting of vinyltrimethoxysilane (VTMS) onto a standard polyolefin by means of reactive extrusion to produce a functionalized liquid ethylene propylene copolymer (EPM). The effects of the process parameters governing the grafting reaction and their synergistic interactions are identified, quantified and used in a mathematical model of the extrusion process. As process variables the VTMS and peroxide concentrations and the extruder temperature setting were systematically studied for their influence on the grafting and the relative grafting degree using a face-centered central composite design (FCD). The grafting degree was quantified by 1H NMR spectroscopy. Response surface methodology (RSM) was used to calculate the most efficient grafting process in terms of chemical usage and graft yield. With the defined processing window, it was possible to make precise predictions about the grafting degree with at the same time highest possible relative degree of grafting.
Automatic anode rod inspection in aluminum smelters using deep-learning techniques: a case study
(2020)
Automatic fault detection using machine learning has become an exciting and promising area of research. This because it accurate and timely way to manage and classify with minimal human effort. In the computer vision community, deep-learning methods have become the most suitable approaches for this task. Anodes are large carbon blocks that are used to conduct electricity during the aluminum reduction process. The most basic function of anode rod inspection is to prevent a situation where the anode rod will not fit into the stub-holes of a new anode. It would be the case for a rod containing either severe toe-in, missing stubs, or a retained thimble on one or more stubs. In this work, to improve the accuracy of shape defect inspection for an anode rod, we use the Fast Region-based Convolutional Network method (Fast R-CNN), model. To train the detection model, we collect an image dataset composed of multi-class of anode rod defects with annotated labels. Our model is trained using a small number of samples, an essential requirement in the industry where the number of available defective samples is limited. It can simultaneously detect multi-class of defects of the anode rod in nearly real-time.
Für den Unternehmer wichtig ist, binnen welcher Fristen er als Käufer seine Rechte bei Sachmängeln geltend machen muss. Ist der Unternehmer Verkäufer, kann er sich erst nach Verjährungsvollendung endgültig zurücklehnen und sicher sein, dass keine Gewährleistungsansprüche gegen ihn mehr geltend gemacht werden können. Im nationalen Rechtsverkehr hat man sich auf Verkäufer- und Käuferseite mittlerweile an die zweijährige Regelfrist im BGB gewöhnt. Welche Fristen im Auslandsgeschäft gelten, ist dagegen oft unklar, weil sich die nationalen Verjährungsfristen oft unterscheiden: Allein in Europa gibt es bei der kaufrechtlichen Gewährleistung Verjährungsfristen zwischen sechs Monaten und sechs Jahren.
Globalization has increased the number of road trips and vehicles. The result has been an intensification of traffic accidents, which are becoming one of the most important causes of death worldwide. Traffic accidents are often due to human error, the probability of which increases when the cognitive ability of the driver decreases. Cognitive capacity is closely related to the driver’s mental state, as well as other external factors such as the CO2 concentration inside the vehicle. The objective of this work is to analyze how these elements affect driving. We have conducted an experiment with 50 drivers who have driven for 25 min using a driving simulator. These drivers completed a survey at the start and end of the experiment to obtain information about their mental state. In addition, during the test, their stress level was monitored using biometric sensors and the state of the environment (temperature, humidity and CO2 level) was recorded. The results of the experiment show that the initial level of stress and tiredness of the driver can have a strong impact on stress, driving behavior and fatigue produced by the driving test. Other elements such as sadness and the conditions of the interior of the vehicle also cause impaired driving and affect compliance with traffic regulations.
Traditional communication of research on climate change fails to encourage individual, corporate, and political leaders to take appropriate action. We argue that this problem is based on an overly simplistic unidirectional model of science communication. Conversely, theory shows that active learning processes are better suited to initiate and mobilize engagement among all stakeholders. Here, we integrate theoretical insights on active learning with empirical evidence from serious gaming: communication should be understood as an integral design feature that relates active learning on climate change to tangible action.
Appropriate mechanical properties and fast endothelialization of synthetic grafts are key to ensure long-term functionality of implants. We used a newly developed biostable polyurethane elastomer (TPCU) to engineer electrospun vascular scaffolds with promising mechanical properties (E-modulus: 4.8 ± 0.6 MPa, burst pressure: 3326 ± 78 mmHg), which were biofunctionalized with fibronectin (FN) and decorin (DCN). Neither uncoated nor biofunctionalized TPCU scaffolds induced major adverse immune responses except for minor signs of polymorph nuclear cell activation. The in vivo endothelial progenitor cell homing potential of the biofunctionalized scaffolds was simulated in vitro by attracting endothelial colony-forming cells (ECFCs). Although DCN coating did attract ECFCs in combination with FN (FN + DCN), DCN-coated TPCU scaffolds showed a cell-repellent effect in the absence of FN. In a tissue-engineering approach, the electrospun and biofunctionalized tubular grafts were cultured with primary-isolated vascular endothelial cells in a custom-made bioreactor under dynamic conditions with the aim to engineer an advanced therapy medicinal product. Both FN and FN + DCN functionalization supported the formation of a confluent and functional endothelial layer.
Purpose. To improve the efficiency of the closed-cycle operation of the field-orientation induction machine in dynamic behavior when load conditions are changing, considering the nonlinearities of the main inductance.
Methodology. The optimal control problem is defined as the minimization of the time integral of the energy losses. The algorithm observed in this paper uses the Matlab/Simulink, dSPACE real-time interface, and C language. Handling real-time applications is made in ControlDesk experiment software for seamless ECU development.
Findings. Adiscrete-time model with an integrated predictive control scheme where the optimization is performed online at every sampling step has been developed. The optimal field-producing current trajectory is determined, so that the copper losses are minimized over a wide operational range. Additionally, the comparison of measurement results with conventional methods is provided, which validates the advantages and performance of the control scheme.
Originality. To solve the given problem, the information vector on the current state of the coordinates of the electromechanical system is used to form a controlling influence in the dynamic mode of operation. For the first time, the formation process of controls has considered the current state and the desired future state of the system in the real-time domain.
Practical value. Apredictive iterative approach for optimal flux level of an induction machine is important to generate the required electromagnetic torque and to reduce power losses simultaneously.
Die Blockchain-Technologie stellt einen vielversprechenden Ansatz für Transparenz und Resilienz in Lieferketten dar. In diesem Beitrag wird untersucht, welche Blockchain-Lösungen derzeit für die Supply-Chain zur Verfügung stehen, und die bislang umgesetzten Projekte in diesem Bereich analysiert. Die meisten der realisierten Projekte beziehen sich auf einfache Produkte und Supply-Chain-Strukturen. Der Grund ist, dass bislang Lösungen zur ganzheitlichen Abbildung von komplexen Produkten in dynamischen Supply-Chain-Strukturen gefehlt haben. Doch jetzt stehen erste vielversprechende Ansätze zur Verfügung.
Globalisation, shorter product life cycles, and increasing product varieties have led to complex supply chains. At the same time, there is a growing interest of customers and governments in having a greater transparency of brands, manufacturers, and producers throughout the supply chain. Due to the complex structure of collaborative manufacturing networks, the increase of supply chain transparency is a challenge for manufacturing companies. The blockchain technology offers an innovative solution to increase the transparency, security, authenticity, and auditability of products. However, there are still uncertainties when applying the blockchain technology to manufacturing scenarios and thus enable all stakeholders to trace back each component of an assembled product. This paper proposes a framework design to increase the transparency and auditability of products in collaborative manufacturing networks by adopting the blockchain technology. In this context, each component of a product is marked with a unique identification number generated by blockchain-based smart contracts. In this way, a transparent auditability of assembled products and their components can be achieved for all stakeholders, including the custome.
Medical implants play a central role in modern medicine and both, naturally derived and synthetic materials have been explored as biomaterials for such devices. However, when implanted into living tissue, most materials initiate a host response. In addition, implants often cause bacterial infections leading to complications. Polyelectrolyte multilayer (PEM) coatings can be used for functionalization of medical implants improving the implant integration and reducing foreign body reactions. Some PEMs are also known to show antibacterial properties. We developed a PEM coating suggesting that it can decrease the risk of bacterial infections occurring after implantation while being highly biocompatible. We applied two different standard tests for evaluating the PEM’s antibacterial properties, the ISO norm (ISO 22196) and one ASTM norm (ASTM E2180) test. We found a reduction of bacterial growth on the PEM but to a different degree depending on the testing method. This result demonstrates the need for defining proper method to evaluate antibacterial properties of surface coatings.
The critical process parameters cell density and viability during mammalian cell cultivation are assessed by UV/VIS spectroscopy in combination with multivariate data analytical methods. This direct optical detection technique uses a commercial optical probe to acquire spectra in a label-free way without signal enhancement. For the cultivation, an inverse cultivation protocol is applied, which simulates the exponential growth phase by exponentially replacing cells and metabolites of a growing Chinese hamster ovary cell batch with fresh medium. For the simulation of the death phase, a batch of growing cells is progressively replaced by a batch with completely starved cells. Thus, the most important parts of an industrial batch cultivation are easily imitated. The cell viability was determined by the well-established method partial least squares regression (PLS). To further improve process knowledge, the viability has been determined from the spectra based on a multivariate curve resolution (MCR) model. With this approach, the progress of the cultivations can be continuously monitored solely based on an UV/VIS sensor. Thus, the monitoring of critical process parameters is possible inline within a mammalian cell cultivation process, especially the viable cell density. In addition, the beginning of cell death can be detected by this method which allows us to determine the cell viability with acceptable error. The combination of inline UV/VIS spectroscopy with multivariate curve resolution generates additional process knowledge complementary to PLS and is considered a suitable process analytical tool for monitoring industrial cultivation processes.
On the design of an urban data and modeling platform and its application to urban district analyses
(2020)
An integrated urban platform is the essential software infrastructure for smart, sustainable and resilitent city planning, operation and maintenance. Today such platforms are mostly designed to handle and analyze large and heterogeneous urban data sets from very different domains. Modeling and optimization functionalities are usually not part of the software concepts. However, such functionalities are considered crucial by the authors to develop transformation scenarios and to optimized smart city operation. An urban platform needs to handle multiple scales in the time and spatial domain, ranging from long term population and land use change to hourly or sub-hourly matching of renewable energy supply and urban energy demand.
Customer foresight is a relatively new research field. We introduce the customer foresight territory by discussing it localization between customer research and foresight research. For this purposse, we look at a variety of methods that help to understand customers and future realities. On this basis we provide an overwiew of customer foresight methods and outline an ideal-typical research journey.
Customer foresight is a relatively new research field. We introduce the customer foresight territory by discussing its localization between customer research and foresight research. For this purpose, we look at a variety of methods that help to understand customers and future realities. On this basis we provide an overview of customer foresight methods and outline an ideal-typical research journey.
Learning factories can complement each other by training different competencies in the field of digitalisation and Industry 4.0. They depict diverse sections of the product development process and focus on various technologies. Within the framework of the International Association of Learning Factories (IALF), the operating organisations of learning factories exchange information on research, training and education. One of the aims is to develop joint projects. The article presents different concepts of cooperation between learning factories while focusing on the improvement of the development of learners competencies e.g. with a broader range of topics. A concept of a joint course between the learning factories in Bochum, Reutlingen and Darmstadt is explained in detail. The three learning factories will be examined with regard to their similarities and differences. The joint course focuses on the target group of students and the topic of digitalisation in the development and production of products. The course and its contents are explained in detail. The new learning approach is evaluated on the basis of feedback from the participants. Finally, challenges resulting from the cooperation between learning factories at different locations and with different operating models will be discussed.
Operational Excellence
(2020)
Als operative Exzellenz oder Operational Excellence (OPEX) wird oft die Fähigkeit eines Unternehmens bezeichnet, "Strukturen, Prozesse und Verhaltensweisen entlang der Wertschöpfungskette so auszurichten, dass eine lernende und sich kontinuierlich verbessernde Organisation entsteht, deren Fokus auf einer hocheffizienten Umsetzung der Kundenanforderungen liegt" (ROI Management Consulting). Am Ende steht die ganzheitliche Verbesserung aller direkten und indirekten Funktionen im Wetschöpfungsprozess. Während Operational Excellence bei Produktionsprozessen bereits zu großen Effizienzgewinn geführt hat, gibt es in Bereichen wie Verwaltung und Logistik noch Nachholbedarf.
Faszination Flughafen
(2020)
In an increasingly competitive environment, suppliers are now seen as an important source of innovation. Long term partnerships enable companies to access the knowledge of suppliers to optimize their business. "Procurement 4.0" is one of the concepts that come to the fore when talking about digitalization of business processes. The major aim of this research is to discuss a conceptual model of "Procurement 4.0" and its potential to rethink the management of supplier relationships, which will be one of the main future tasks of procurement. The paper is based on a factual-analytical research approach that serves to continuously specify and supplement the elements of the frame of reference: Two challenging concepts, "Procurement 4.0" and Supplier Relationship Management, are merged to contribute to the fact that purchasing is indispensable as an "interface" within a global supply chain to reap the benefits of digitization. The factors that prove to be obstacles to digital supplier relationship management along the digital supplier journey - e.g. lack of guidelines, approaches or tools and a lack of understanding of the importance of long-term relationships - are reflected within the identified technologies of digital transformation. A comprehensive analysis of the given situation within digital supplier relationship management in Germany is provided. The most important digital supplier touchpoints are discussed in order to develop a traditional supplier relationship towards a digital relationship management. Thus, this paper succeeds in illustrating how the innovative concept of a supplier journey can be implemented in practice to counteract the future, entrepreneurial challenges.
Comparison of sleep characteristics measurements: a case study with a population aged 65 and above
(2020)
Good sleep is crucial for a healthy life of every person. Unfortunately, its quality often decreases with aging. A common approach to measuring the sleep characteristics is based on interviews with the subjects or letting them fill in a daily questionnaire and afterward evaluating the obtained data. However, this method has time and personal costs for the interviewer and evaluator of responses. Therefore, it would be important to execute the collection and evaluation of sleep characteristics automatically. To do that, it is necessary to investigate the level of agreement between measurements performed in a traditional way using questionnaires and measurements obtained using electronic monitoring devices. The study presented in this manuscript performs this investigation, comparing such sleep characteristics as "time going to bed", "total time in bed", "total sleep time" and "sleep efficiency". A total number of 106 night records of elderly persons (aged 65+) were analyzed. The results achieved so far reveal the fact that the degree of agreement between the two measurement methods varies substantially for different characteristics, from 31 minutes of mean difference for "time going to bed" to 77 minutes for "total sleep time". For this reason, a direct exchange of objective and subjective measuring methods is currently not possible.
Concrete is significant for construction. A problem in application is the appearance of cracks that will damage its strength. An autogenous crack-healing mechanism based on bacteria receives increasing attention in recent years. The bacteria are able to form calcium carbonate (CaCO3) precipitations in suitable conditions to protect and reinforce the concrete. However, a large number of spores are crushed in aged specimens, resulting in a loss of viability. A new kind of hydrogel crosslinked by alginate, chitosan and calcium ions was introduced in this study. It was observed that the addition of chitosan improved the swelling properties of calcium alginate. Opposite pH response to calcium alginate was observed when the chitosan content in the solution reached 1.0%. With an addition of 1.0% chitosan in hydrogel beads, 10.28% increase of compressive strength and 13.79% increase of flexural strength to the control were observed. The results reveal self-healing properties of concretes. A healing crack of 4 cm length and 1 mm width was observed when using cement PO325, with the addition of bacterial spores (2.54–3.07 × 105/cm3 concrete) encapsulated by hydrogel containing no chitosan.
We investigate the toxicity of different types and sizes of microplastic particles (0.3–4 mm) under different conditions (new particles, aged particles with biofilm, and particles with adsorbed Tributyltin) on the freshwater amphipod Gammarus fossarum in 3-week exposures. All types of plastic particles, which were randomly taken up to a small extent, were mostly Polyphenylenoxide, Polybutylentherephthalate and Polypropylene, with particles < 1 mm in size. Plastic particles did not affect the feeding and locomotory behaviour of gammarids, and there was no strong difference between pristine plastic particles and aged particles with biofilm. Mortality tended to be higher compared with the control. Tributyltinhydride (TBTH) adsorbed to microplastic particles had no effect on uptake, survival, feeding and locomotory behaviour during the 3 weeks of exposure. Dissolved TBTH, however, was already very toxic after few days of exposure (LC50-96h < 1 ng l–1).
Rapidly changing market conditions and global competition are leading to an increasing complexity of logistics systems and require innovative approaches with respect to the organisation and control of these systems. In scientific research, concepts of autonomously controlled logistics systems show a promising approach to meet the increasing requirements for flexible and efficient order processing. In this context, this work aims to introduce a system that is able to adjust order processing dynamically, and optimise intralogistics transportation regarding various generic intralogistics target criteria. The logistics system under consideration consists of various means of transport for autonomous decision-making and fulfilment of transport orders with defined source-sink relationships. The context of this work is set by introducing the Learning Factory Werk 150 with its existing hardware and software infrastructure and its defined target figures to measure the performance of the system. Specifically, the important target figures cost and performance are considered for the transportation system. The core idea of the system’s logic is to solve the problem of order allocation to specific means of transport by linking a Genetic Algorithm with a Multi-Agent System. The implementation of the developed system is described in an application scenario at the learning factory.
This article examines centralised and decentralised approaches towards managing internationalisation by means of a case study. Reutlingen University (Hochschule Reutlingen), a university of applied sciences in Southern Germany, has three decades of experience in managing internationalisation. Its strongly integrated and hybrid approach combines centralised and decentralised strategies with the aim of achieving responsiveness, innovation, transparency, quality, and goal alignment. Centralisation and decentralisation are manifested on two levels: university versus schools, and school versus individual programmes. Since internationalisation is embedded in virtually all areas of the university’s operations, examples will be provided ranging from administration and marketing to research, international programme management and curricula.
Based on a survey among customers of seven German municipal utilities, we estimate two regression models to identify the most prospective customer segments and their preferences and motivations for participating in peer-to-peer (P2P) electricity trading and develop implications for decision-makers in the energy sector and policy-makers for this currently relatively unknown product. Our results show a large general openness of private households towards P2P electricity trading, which is also the main predictor of respondents' intention to participate. It is mainly influenced by individuals’ environmental attitude, technical interest, and independence aspiration. Respondents with the highest willingness to participate in P2P electricity trading are mainly motivated by the ability to share electricity, and to a lesser extent by economic reasons. They also have stronger preferences for innovative pricing schemes (service bundles, time-of-use tariffs). Differences between individuals can be observed depending on their current ownership (prosumers) or installation probability of a microgeneration unit (consumers, planners). Rather than current prosumers, especially planners willing to install microgeneration in the foreseeable future are considered to be the most promising target group for P2P electricity trading. Finally, our results indicate that P2P electricity trading could be a promising niche option in the German energy transition.
Some widely used optical measurement systems require a scan in wavelength or in one spatial dimension to measure the topography in all three dimensions. Novel hyperspectral sensors based on an extended Bayer pattern have a high potential to solve this issue as they can measure three dimensions in a single shot. This paper presents a detailed examination of a hyperspectral sensor including a description of the measurement setup. The evaluated sensor (Ximea MQ022HG-IM-SM5X5-NIR) offers 25 channels based on Fabry–Pérot filters. The setup illuminates the sensor with discrete wavelengths under a specified angle of incidence. This allows characterization of the spatial and angular response of every channel of each macropixel of the tested sensor on the illumination. The results of the characterization form the basis for a spectral reconstruction of the signal, which is essential to obtain an accurate spectral image. It turned out that irregularities of the signal response for the individual filters are present across the whole sensor.
Process quality has reached a high level on mass production, utilizing well known methods like the DoE. The drawback of the unterlying statistical methods is the need for tests under real production conditions, which cause high costs due to the lost output. Research over the last decade let to methods for correcting a process by using in-situ data to correct the process parameters, but still a lot of pre-production is necessary to get this working. This paper presents a new approach in improving the product quality in process chains by using context data - which in part are gathered by using Industry 4.0 devices - to reduce the necessary pre-production.
This paper studies the impact of financial liquidity on the macro-economy. We extend a classic macroeconomic modeland compute numerical simulations. The model confirms that persistently low inflation can occur despite a high degreeof financial liquidity due to a reallocation of cash, normal and risk-free bonds. In that regard, our model uncovers anexplanation of a flat Phillips curve. Overall, our approach contributes to a rather disregarded matter in macroeconomictheory.
This article studies the current debate on Coronabonds and the idea of European public debt in the aftermath of the Corona pandemic. According to the EU-Treaty economic and fiscal policy remains in the sovereignty of Member States. Therefore, joint European debt instruments are risky and trigger moral hazard and free-riding in the Eurozone. We exhibit that a mixture of the principle of liability and control impairs the present fiscal architecture and destabilizes the Eurozone. We recommend that Member States ought to utilize either the existing fiscal architecture available or establish a political union with full sovereignty in Europe. This policy conclusion is supported by the PSPP-judgement of the Federal Constitutional Court of Germany on 5 May 2020. This ruling initiated a lively debate about the future of the Eurozone and Europe in general.
Since Adam Smith, the “homo oeconomicus” is the behavioural model in economics. Commonly this model characterizes a selfish individual, a kind of ruthless type, whose greed for profit seems to take precedence over moral values. Already 100 years ago, Max Weber provided a modernization of the model concerning the methodological individualism. Recent research in cognitive sciences reveals a further modernization of this standard model in economics. Neuro-economics, a highly interdisciplinary research field, is building a new behavioural consensus. This article examines the new properties of the “neuro-homo oeconomicus”. We show that the new behavioural model is rather similar to the long-standing economic prototype. To that extent, the neuro-model is more hype than hope. In principle, this article considers an ancient philosophical question about the nature of humans in general.
Das Urteil des Bundesverfassungsgerichts (BVerfG) vom 5. Mai 2020 ist Schlusspunkt und zugleich Neuanfang nach einer jahrelangen verfassungsrechtlichen und ökonomischen Auseinandersetzung. Im Prinzip geht es um die konstituierenden Prinzipien der Eurozone sowie das Mandat der Europäischen Zentralbank (EZB). Der EU-Vertrag charakterisiert die Leitplanken der Wirtschafts- und Währungsunion (WWU) im Spannungsfeld der Art. 119, 123 und 125 des Vertrags über die Arbeitsweise der Europäischen Union (AEUV). Mithin liegt die wirtschaftspolitische Souveränität – nach dem Prinzip Haftung und Kontrolle – allein bei den Mitgliedstaaten. Die Organe der Europäischen Union (EU) sowie der Gerichtshof der Europäischen Union (EuGH) legen diese Leitplanken gemäß dem Leitgedanken in Art. 1 des Vertrags über die Europäische Union (EUV) einer „ever closer union“ regelmäßig mit weitem Ermessen aus.
Polycaprolactone (PCL) was electrospun with the addition of arginine (Arg), an α-amino acid that accelerates the haeling process. The efficient needleless electrospinning technique was used for the fabrication of the nanofibrous layers. The materials produced consisted mainly of fibers with diameters of between 200 and 400 nm. Moreover, both microfibers and beads were present within the layers. Higher bead sized were observed with the increased addition of arginine.
Kostenkalkulation im Anlagenbau: Modell zur Bewertung der Konkurrenzfähigkeit im Entwicklungsstadium
(2020)
Während Grundchemikalien größtenteils im industriellen Maßstab mittels verfahrenstechnisch optimierter Großanlagen hergestellt werden, entwickeln Forschungsinstitute biobasierte Prozesse zur Herstellung von Plattformchemikalien im Labor- und Pilotmaßstab. Im Rahmen dieser Arbeit wird ein Kostenkalkulationsmodell zur Abschätzung der Investitions- und Betriebskosten verfahrenstechnischer Anlagen vorgestellt, auf dessen Basis die ökonomische Konkurrenzfähigkeit in der Entwicklung befindlicher Verfahren ermittelt werden kann. Das Modell ist fur Anwendungen im industriellen Maßstab
geeignet.
This study investigates empirically the development of working capital management and its impact on profitability and shareholder value in Germany. We analyse panel data of 115 firms listed on the German Prime Standard, covering the period from 2011 to 2017. The results provide evidence that efficient working capital management, indicated by a shorter cash conversion cycle, deteriorated over time, but that a shorter cash conversion has a positive impact on profitability and shareholder value. The findings highlight the need that managers should give greater priority to working capital optimization, even in a low-interest environment. The paper contributes to the literature by advancing this research area in Germany, and it is the first study investigating shareholder relationship with working capital management and all its determinants.
Entrepreneurship education is becoming increasingly important in higher education and also drives the development of innovative teaching formats, which can increase student engagement. It does, however, need greater international focus to become more attractive for both domestic and international students. This paper presents the examination and course design of two case studies, which promote entrepreneurship education for domestic and international students. These examples show that entrepreneurship courses are attractive due to their focus on interdisciplinarity, experience-based learning, and project-based work. Following a design-based research approach, this paper provides a practical contribution by offering a detailed overview of course design principles, classroom practice and presents reflections and learnings from an iterative development process.
Hypothesis
The origin of negative surface charge at water/air interface is still not clear. The most probable origin is specific adsorption of OH− ions. From diffuse layer potential, we can evaluate the surface density of ions in the Stern layer which can be a measure for the specific adsorption of ions and determines whether the surface charge is solely due to the specific adsorption of OH− ions.
Experiments
Equilibrium thickness of foam films of pure water and aqueous solutions of NaCl, HCl, and NaOH was measured as a function of disjoining pressure for water and as a function of concentration for the aqueous solutions at 298.15 K. Quartz-glass cells thoroughly cleaned and immersed in pure water before use were used for the measurement.
Findings
Application of a modified Poisson-Boltzmann equation to the equilibrium film thickness gave the diffuse layer potential and the surface density of ions in the Stern layer. From the concentration dependence of the surface density, it was concluded that not only OH− ions but also Cl− ions and HCO3− and/or CO32− ions adsorb specifically at the water/air interface.
Deep learning-based fabric defect detection methods have been widely investigated to improve production efficiency and product quality. Although deep learning-based methods have proved to be powerful tools for classification and segmentation, some key issues remain to be addressed when applied to real applications. Firstly, the actual fabric production conditions of factories necessitate higher real-time performance of methods. Moreover, fabric defects as abnormal samples are very rare compared with normal samples, which results in data imbalance. It makes model training based on deep learning challenging. To solve these problems, an extremely efficient convolutional neural network, Mobile-Unet, is proposed to achieve the end-to-end defect segmentation. The median frequency balancing loss function is used to overcome the challenge of sample imbalance. Additionally, Mobile-Unet introduces depth-wise separable convolution, which dramatically reduces the complexity cost and model size of the network. It comprises two parts: encoder and decoder. The MobileNetV2 feature extractor is used as the encoder, and then five deconvolution layers are added as the decoder. Finally, the softmax layer is used to generate the segmentation mask. The performance of the proposed model has been evaluated by public fabric datasets and self-built fabric datasets. In comparison with other methods, the experimental results demonstrate that segmentation accuracy and detection speed in the proposed method achieve state-of-the-art performance.
The use of learning factories for education in maintenance concepts is limited, despite the important role maintenance plays in the effective operation of organizational assets. A training programme in a learning factory environment is presented where a combination of gamification, classroom training and learning factory applications is used to introduce students to the concepts of maintenance plan development, asset failure characteristics and the costs associated with maintenance decision-making. The programme included a practical task to develop a maintenance plan for different advanced manufacturing machines in a learning factory setting. The programme stretched over a four-day period and demonstrated how learning factories can be effectively utilized to teach management related concepts in an interdisciplinary team context, where participants had no, or very limited, previous exposure to these concepts.
Strong optical mode coupling between two adjacent λ/2 Fabry-Pérot microresonators consisting of three parallel silver mirrors is investigated experimentally and theoretically as a function of their detuning and coupling strength. Mode coupling can be precisely controlled by tuning the mirror spacing of one resonator with respect to the other by piezoelectric actuators. Mode splitting, anti-crossing and asymmetric modal damping are observed and theoretically discussed for the symmetric and antisymmetric supermodes of the coupled system. The spectral profile of the supermodes is obtained from the Fourier transform of the numerically calculated time evolution of the individual resonator modes, taking into account their resonance frequencies, damping and coupling constants, and is in excellent agreement with the experiments. Our microresonator design has potential applications for energy transfer between spatially separated quantum systems in micro optoelectronics and for the emerging field of polaritonic chemistry.
In Germany, mobility is currently in a state of flux. Since June 2019, electric kick scooters (e-scooters) have been permitted on the roads, and this market is booming. This study employs a user survey to generate new data, supplemented by expert interviews to determine whether such e-scooters are a climate-friendly means of transport. The environmental impacts are quantified using a life cycle assessment. This results in a very accurate picture of e-scooters in Germany. The global warming potential of an e-scooter calculated in this study is 165 g CO2-eq./km, mostly due to material and production (that together account for 73% of the impact). By switching to e-scooters where the battery is swapped, the global warming potential can be reduced by 12%. The lowest value of 46 g CO2-eq./km is reached if all possibilities are exploited and the life span of e-scooters is increased to 15 months. Comparing these emissions with those of the replaced modal split, e-scooters are at best 8% above the modal split value of 39 g CO2-eq./km.
Elasticity is considered to be the most beneficial characteristic of cloud environments, which distinguishes the cloud from clusters and grids. Whereas elasticity has become mainstream for web-based, interactive applications, it is still a major research challenge how to leverage elasticity for applications from the high-performance computing (HPC) domain, which heavily rely on efficient parallel processing techniques. In this work, we specifically address the challenges of elasticity for parallel tree search applications. Well-known meta-algorithms based on this parallel processing technique include branch-and-bound and backtracking search. We show that their characteristics render static resource provisioning inappropriate and the capability of elastic scaling desirable. Moreover, we discuss how to construct an elasticity controller that reasons about the scaling behavior of a parallel system at runtime and dynamically adapts the number of processing units according to user-defined cost and efficiency thresholds. We evaluate a prototypical elasticity controller based on our findings by employing several benchmarks for parallel tree search and discuss the applicability of the proposed approach. Our experimental results show that, by means of elastic scaling, the performance can be controlled according to user-defined thresholds, which cannot be achieved with static resource provisioning.
Azide-bearing cell-derived extracellular matrices (“clickECMs”) have emerged as a highly exciting new class of biomaterials. They conserve substantial characteristics of the natural extracellular matrix (ECM) and offer simultaneously small abiotic functional groups that enable bioorthogonal bioconjugation reactions. Despite their attractiveness, investigation of their biomolecular composition is very challenging due to the insoluble and highly complex nature of cell-derived matrices (CDMs). Yet, thorough qualitative and quantitative analysis of the overall material composition, organisation, localisation, and distribution of typical ECM-specific biomolecules is essential for consistent advancement of CDMs and the understanding of the prospective functions of the developed biomaterial. In this study, we evaluated frequently used methods for the analysis of complex CDMs. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and (immune)histochemical staining methods in combination with several microscopic techniques were found to be highly eligible. Commercially available colorimetric protein assays turned out to deliver inaccurate information on CDMs. In contrast, we determined the nitrogen content of CDMs by elementary analysis and converted it into total protein content using conversion factors which were calculated from matching amino acid compositions. The amount of insoluble collagens was assessed based on the hydroxyproline content. The Sircol™ assay was identified as a suitable method to quantify soluble collagens while the Blyscan™ assay was found to be well-suited for the quantification of sulphated glycosaminoglycans (sGAGs). Eventually, we propose a series of suitable methods to reliably characterise the biomolecular composition of fibroblast-derived clickECM.
In recent years, the development and application of decellularized extracellular matrices (ECMs) for use as biomaterials have grown rapidly. These cell-derived matrices (CDMs) represent highly bioactive and biocompatible materials consisting of a complex assembly of biomolecules. Even though CDMs mimic the natural microenvironment of cells in vivo very closely, they still lack specifically addressable functional groups, which are often required to tailor a biomaterial functionality by bioconjugation. To overcome this limitation, metabolic glycoengineering has emerged as a powerful tool to equip CDMs with chemical groups such as azides. These small chemical handles are known for their ability to undergo bioorthogonal click reactions, which represent a desirable reaction type for bioconjugation. However, ECM insolubility makes its processing very challenging. In this contribution, we isolated both the unmodified ECM and azide-modified clickECM by osmotic lysis. In a first step, these matrices were concentrated to remove excessive water from the decellularization step. Next, the hydrogel-like ECM and clickECM films were mechanically fragmentized, resulting in easy to pipette suspensions with fragment sizes ranging from 7.62 to 31.29 μm (as indicated by the mean d90 and d10 values). The biomolecular composition was not impaired as proven by immunohistochemistry. The suspensions were used for the reproducible generation of surface coatings, which proved to be homogeneous in terms of ECM fragment sizes and coating thicknesses (the mean coating thickness was found to be 33.2 ± 7.3 μm). Furthermore, they were stable against fluid-mechanical abrasion in a laminar flow cell. When primary human fibroblasts were cultured on the coated substrates, an increased bioactivity was observed. By conjugating the azides within the clickECM coatings with alkyne-coupled biotin molecules, a bioconjugation platform was obtained, where the biotin–streptavidin interaction could be used. Its applicability was demonstrated by equipping the bioactive clickECM coatings with horseradish peroxidase as a model enzyme.
Heat pumps in combination with a photovoltaic system are a very promising option for the transformation of the energy system. By using such a system for coupling the electricity and heat sectors, buildings can be heated sustainably and with low greenhouse gas emissions. This paper reveals a method for dimensioning a suitable system of heat pump and photovoltaics (PV) for residential buildings in order to achieve a high level of (photovoltaic) PV self-consumption. This is accomplished by utilizing a thermal energy storage (TES) for shifting the operation of the heat pump to times of high PV power production by an intelligent control algorithm, which yields a high portion of PV power directly utilized by the heat pump. In order to cover the existing set of building infrastructure, 4 reference buildings with different years of construction are introduced for both single- and multi-family residential buildings. By this means, older buildings with radiator heating as well as new buildings with floor heating systems are included. The simulations for evaluating the performance of a heat pump/PV system controlled by the novel algorithm for each type of building were carried out in MATLAB-Simulink® 2017a. The results show that 25.3% up to 41.0% of the buildings’ electricity consumption including the heat pump can be covered directly from the PV installation per year. Evidently, the characteristics of the heating system significantly influence the results: new buildings with floor heating and low supply temperatures yield a higher level of PV self-consumption due to a higher efficiency of the heat pump compared to buildings with radiator heating and higher supply temperatures. In addition, the effect of adding a battery to the system was studied for two building types. It will be shown that the degree of PV self-consumption increases in case a battery is present. However, due to the high investment costs of batteries, they do not pay off within a reasonable period.
Customer orientation should be the core engine of every organisation while IT can be considered as the enabler to generate competitive advantages along customer processes in marketing, sales and service. Research shows that customer relationship management (CRM) enables organisations to perform better and experience indicates that organisations that focus on customer orientation are more successful. With marketplace organisations such as Amazon, Alibaba or Conrad shaping the future of customer centricity and information technology, German B2B organisations need to shift their value contribution from product-centric to customer-centric. While these organisations are currently attempting to implement CRM software and putting their customers more into focus, the question remains how organisations are approaching the implementation of CRM and whether these attempts are paying off in terms of business performance.
Whether diversity enhances or impedes team creativity remains an issue of scholarly debate. Explanations of this ambiguity often lie in how diversity is both operationalized and measured. Eschewing the popular approach of using differences in objective criteria to signal diversity, a deep-level approach that focuses on differences in personal values is taken in this study. Value diversity is measured in the two forms of variety and separation and their associations with team creativity are explored. The investigation is augmented by considering the mediating role of team communication in these associations. The analysis was conducted on a sample of 98 teams, using both subjective and objective measures. The findings reveal that when considering value diversity in terms of variety, there is a positive association between diversity and team creativity. However, when the separation dimension of value diversity is considered, a negative association between diversity and team creativity is identified. Complex pathways pertaining to the role of communication within these relationships are also uncovered. In moving beyond rudimentary categories and measurement of diversity, this study further elucidates the complexity of the diversity–creativity relationship. Conclusions are drawn and implications for further research and managerial practice are derived.
Human adipose-derived stem cells (hASCs) have become an important cell source for the use in tissue engineering and other medical applications. Not every biomaterial is suitable for human cell culture and requires surface modifications to enable cell adhesion and proliferation. Our hypothesis is that chemical surface modifications introduced by low-discharge plasma enhance the adhesion and proliferation of hASCs. Polystyrene (PS) surfaces were modified either by ammonia (NH3), carbon dioxide (CO2) or acrylic acid (AAc) plasma. The results show that the initial cell adhesion is significantly higher on all modified surfaces than on unmodified material as evaluated by bright field microscopy, live/dead staining, total DNA amount and scanning electron microscopy. The formation of focal adhesions was well pronounced on the Tissue Culture PS, NH3-, and CO2 plasma modified samples. The number of matured fibrillar adhesions was significantly higher on NH3 plasmamodified surfaces than on all other surfaces. Our study validates the suitability of chemical plasma activation and represents a method to enhance hASCs adhesion and improved cell expansion. All chemical modification promoted hASCs adhesion and can therefore be used for the modification of different scaffold materials whereby NH3-plasma modified surfaces resulted in the best outcome concerning hASCs adhesion and proliferation.
The extracellular matrix (ECM) naturally surrounds cells in humans, and therefore represents the ideal biomaterial for tissue engineering. ECM from different tissues exhibit different composition and physical characteristics. Thus, ECM provides not only physical support but also contains crucial biochemical signals that influence cell adhesion, morphology, proliferation and differentiation. Next to native ECM from mature tissue, ECM can also be obtained from the in vitro culture of cells. In this study, we aimed to highlight the supporting effect of cell-derived- ECM (cdECM) on adipogenic differentiation. ASCs were seeded on top of cdECM from ASCs (scdECM) or pre-adipocytes (acdECM). The impact of ECM on cellular activity was determined by LDH assay, WST I assay and BrdU assay. A supporting effect of cdECM substrates on adipogenic differentiation was determined by oil red O staining and subsequent quantification. Results revealed no effect of cdECM substrates on cellular activity. Regarding adipogenic differentiation a supporting effect of cdECM substrates was obtained compared to control. With these results, we confirm cdECM as a promising biomaterial for adipose tissue engineering.
Als Google vor einigen Jahren begann, seine riesigen Personaldatenbestände auszuwerten, um herauszufinden, welche Eigenschaften gute Führungskräfte ausmachen, betrat es Neuland. Die Ergebnisse legten nahe, die Daten auch für andere personalwirtschaftliche Fragen zu nutzen (vgl. Garvin).
Inzwischen beschäftigen sich nicht nur Technologie-unternehmen wie Google mit Verfahren, die unter dem Schlagwort People Analytics (auch HR Analytics oder Workforce Analytics) intensiv diskutiert und erforscht werden. Dabei werden die umfangreichen Bestände an mitarbeiterbezogenen Daten, die bei der Rekrutierung, bei Mitarbeiterumfragen oder Leistungsbeurteilungen anfallen, systematisch analysiert und für Prognosen genutzt (vgl. Marler/Boudreau, S. 15). Dem liegt die Annahme zugrunde, dass Personalentscheidungen verbessert werden, wenn sie nicht nur auf Intuition und Erfahrung beruhen, sondern zudem auf einem soliden Datenfundament.
Durch die Digitalisierung der Arbeitswelt und die New Work-Bewegung verändert sich die Art und Weise, wie wir zu-ammenarbeiten. Entsprechend wird derzeit viel über Führung gesprochen – möglicherweise zu viel. Die zentrale These des Beitrags ist, dass wir besser verstehen können, wie Führungskräften und Mitarbeitende zukunftsorientiert zusam-menarbeiten, wenn wir weniger direkt über Führung reden, sondern zunächst von der Situation aus denken, in der sich Akteure koordinieren. Führung wird dann nicht isoliert, sondern zusammen mit verschiedenen Koordinationsformen betrachtet (wie Autonomie, Selbstorganisation, Management und eben Führung). Das kann in der Praxis helfen, den Wandel der Zusammenarbeit – inklusive der neuen Art von Führung – reflektierter und zielorientierter zu gestalten.
In an effort to make the cultural and institutional aspects of energy efficiency in industrial organizations more visible, this article introduces a theoretical framework of decision-making processes. Taking a sociological perspective and viewing organizations as cultural systems embedded in wider social contexts, I have developed a multilevel framework addressing institutional, organizational, and individual dimensions shaping decisions on energy efficiency. The framework's development is based on qualitative empirical fieldwork and integrates insights into organizational theory; neo-institutional theory, the attention-based view of the firm, and organizational culture theories. I conclude that decisions on energy efficiency are results of problematization and theorization processes. These processes emerge between the institutional issue-field, the organization, and its members. The model explains decisions shaped by environment (external and material), organizational processes (energy-efficiency practices, climate and culture) and individuals’ characteristics. The framework serves several purposes: introducing a meta-theory of decision making, providing a concept for empirical analysis, and enabling connectivity to the research on barriers.
Despite strong political efforts in Europe, industrial small- and medium sized enterprises (SMEs) seem to neglect adopting practices for energy effciency. By taking a cultural perspective, this study investigated what drives the establishment of energy effciency and corresponding practices in SMEs. Based on 10 ethnographic case studies and a quantitative survey among 500 manufacturing SMEs, the results indicate the importance of everyday employee behavior in achieving energy savings. The studied enterprises value behavior related measures as similarly important as technical measures. Raising awareness for energy issues within the organization, therefore, constitutes an essential leadership task that is oftentimes perceived as challenging and frustrating. It was concluded that the embedding of energy efficiency in corporate strategy, the use of a broad spectrum of different practices, and the empowerment and involvement of employees serve as major drivers in establishing energy effciency within SMEs. Moreover, the findings reveal institutional influences on shaping the meanings of energy effciency for the SMEs by raising attention for energy effciency in the enterprises and making energy effciency decisions more likely. The main contribution of the paper is to offer an alternative perspective on energy effciency in SMEs beyond the mere adoption of energy-effcient technology.
Estimating molar solubility from the Hildebrand-Scott relation employing Hansen solubility parameters (HSP) is widely presumed a valid semi quantitative approach. To test this presumption and to determine quantitatively the inherent accuracy of such a solubility prognosis, l-ascorbic acid (LAA) was treated as an example of a commercially important solute. Analytical calculus and Monte Carlo (MC) simulation were performed for 20 common solvents with total HSP ranging from 14.5 to 33.0 (MPa)0.5 utilizing validated material data. It was found that, due to the uncertainty of the material data used in the calculations, the solubility prediction had a large scattering and, thus, a low precision.
Bone tissue is highly vascularized. The crosstalk of vascular and osteogenic cells is not only responsible for the formation of the strongly divergent tissue types but also for their physiological maintenance and repair. Extrusion-based bioprinting presents a promising fabrication method for bone replacement. It allows for the production of large-volume constructs, which can be tailored to individual tissue defect geometries. In this study, we used the all-gelatin-based toolbox of methacryl-modified gelatin (GM), non-modified gelatin (G) and acetylated GM (GMA) to tailor both the properties of the bioink towards improved printability, and the properties of the crosslinked hydrogel towards enhanced support of vascular network formation by simple blending. The vasculogenic behavior of human dermal microvascular endothelial cells (HDMECs) and human adipose-derived stem cells (ASCs) was evaluated in the different hydrogel formulations for 14 days. Co-culture constructs including a vascular component and an osteogenic component (i.e. a bone bioink based on GM, hydroxyapatite and ASCs) were fabricated via extrusion-based bioprinting. Bioprinted co-culture constructs exhibited functional tissue-specific cells whose interplay positively affected the formation and maintenance of vascular-like structures. The setup further enabled the deposition of bone matrix associated proteins like collagen type I, fibronectin and alkaline phosphatase within the 30-day culture.
Hypericin is one of the most efficient photosensitizers used in photodynamic tumor therapy (PDT). The reported treatments of this drug reach from antidepressive, antineoplastic, antitumor and antiviral activity. We show that hypericin can be optically detected down to a single molecule at ambient conditions. Hypericin can even be observed inside of a cancer cell, which implies that this drug can be directly used for advanced microscopy techniques (PALM, spt-PALM, or FLIM). Its photostability is large enough to obtain single molecule fluorescence, surface enhanced Raman spectra (SERS), fluorescence lifetime, antibunching, and blinking dynamics. Sudden spectral changes can be associated with a reorientation of the molecule on the particle surface. These properties of hypericin are very sensitive to the local environment. Comparison of DFT calculations with SERS spectra show that both the neutral and deprotonated form of hypericin can be observed on the single molecule and ensemble level.
Enhancing data-driven algorithms for human pose estimation and action recognition through simulation
(2020)
Recognizing human actions, reliably inferring their meaning and being able to potentially exchange mutual social information are core challenges for autonomous systems when they directly share the same space with humans. Intelligent transport systems in particular face this challenge, as interactions with people are often required. The development and testing of technical perception solutions is done mostly on standard vision benchmark datasets for which manual labelling of sensory ground truth has been a tedious but necessary task. Furthermore, rarely occurring human activities are underrepresented in these datasets, leading to algorithms not recognizing such activities. For this purpose, we introduce a modular simulation framework, which offers to train and validate algorithms on various human-centred scenarios. We describe the usage of simulation data to train a state-of-the-art human pose estimation algorithm to recognize unusual human activities in urban areas. Since the recognition of human actions can be an important component of intelligent transport systems, we investigated how simulations can be applied for his purpose. Laboratory experiments show that we can train a recurrent neural network with only simulated data based on motion capture data and 3D avatars, which achieves an almost perfect performance in the classification of those human actions on real data.
Der Digitale Zwilling ist ein Technologie-Trendthema mit großen Potenzialen in einer Vielzahl von Anwendungsbereichen – insbesondere für produzierende Unternehmen. Eine Studie des Reutlinger Zentrums Industrie 4.0 beschäftigt sich mit heutigen und zukünftigen Anwendungsmöglichkeiten von Digitalen Zwillingen und gibt Impulse für eine schrittweise Implementierung im Unternehmen.
Relationship between a high-performance work system and employee outcomes: a multilevel analysis
(2020)
Although research on high-performance work systems (HPWS) is increasing, there are few studies in which the focus is on whether and how firm-level HPWS affect individual-level employee outcomes. Using social identity theory, we examined the relationship between HPWS and employee outcomes, and the role organizational identification plays as a mediator in this relationship. We used a multilevel research design and collected data at the organizational and individual levels from a sample of 485 employees of 32 companies in Guangdong Province, China. We used Amos 17.0 and hierarchical linear modeling 6.08 software to examine our hypotheses and the theoretical model. Results showed that organizational identification fully mediated the relationship between HPWS and employees’ job performance as well as that between HPWS and their turnover intention. Our findings provide new insights into the relationship between firm-level human resource management and individual-level employee outcomes, and highlight the importance of considering the implementation of HPWS practices to strengthen employees’ identification with the organization and improve their performance.
Monday is unique for its reputation as a “bad” day—one that is characterized by pessimism and reluctance as noted by Rystrom and Benson (Financ Anal J 45(5):75–78, 1989). But the extent to which this applies to stock markets is still in dispute. While early evidence points to a Monday effect leading to negative returns, recent studies tend to suggest its disappearance or reversal.As a replication study, this paper searches for new evidence of this effect in the German stock market.We use data on the German blue-chip index DAX between 2000 and 2017 to test for the presence of a Monday effect by applying regression and controlling with GARCH analysis. The observation period provides a detailed insight into different market phases in one of the most liquid and information efficient international stock markets. Our results contribute no evidence to the persistent existence of a Monday effect on the German stock market. Our analysis is robust against the background of different market sentiments before, during and after the financial crisis.
Human bestrophin-1 (hBest1) is a transmembrane Ca2+- dependent anion channel, associated with the transport of Cl−, HCO3- ions, γ-aminobutiric acid (GABA), glutamate (Glu), and regulation of retinal homeostasis. Its mutant forms cause retinal degenerative diseases, defined as Bestrophinopathies. Using both physicochemical - surface pressure/mean molecular area (π/A) isotherms, hysteresis, compressibility moduli of hBest1/sphingomyelin (SM) monolayers, Brewster angle microscopy (BAM) studies, and biological approaches - detergent membrane fractionation, Laurdan (6-dodecanoyl-N,N-dimethyl-2-naphthylamine) and immunofluorescence staining of stably transfected MDCK-hBest1 and MDCK II cells, we report:
1) Ca2+, Glu and GABA interact with binary hBest1/SM monolayers at 35 °C, resulting in changes in hBest1 surface conformation, structure, self-organization and surface dynamics. The process of mixing in hBest1/SM monolayers is spontaneous and the effect of protein on binary films was defined as “fluidizing”, hindering the phase-transition of monolayer from liquid-expanded to intermediate (LE-M) state;
2) in stably transfected MDCK-hBest1 cells, bestrophin-1 was distributed between detergent resistant (DRM) and detergent-soluble membranes (DSM) - up to 30 % and 70 %, respectively; in alive cells, hBest1 was visualized in both liquid-ordered (Lo) and liquid-disordered (Ld) fractions, quantifying protein association up to 35 % and 65 % with Lo and Ld. Our results indicate that the spontaneous miscibility of hBest1 and SM is a prerequisite to diverse protein interactions with membrane domains, different structural conformations and biological functions.
The variety and interdependencies of enterprise systems that digitize large organizations’ processes have grown significantly, resulting in complex enterprise systems landscapes. Avoiding such complexity requires addressing the IT-business engagement gap between (inadvertent) producers of complexity in the business and those in IT who have to manage it. We identify mechanisms for tackling three components of this gap: 1) bridging the awareness gap through information sharing, 2) narrowing the incentive gap through shared goals, and 3) closing the authority gap by evening out power differentials through empowerment.
By 2019, German-based Kärcher, "the world's leading provider of cleaning technology", hat turned its professional cleaning devices into digital offerings. The data generated by these connected cleaning devices formed a key ingredient in the company's ongoing strategic shift in its B2B business: Kärcher was transforming from a seller of cleaning devices to a provider of consulting services in order to help professional cleaning companies improve their cleaning processes.
The case illustrates how the company learned to generate value from digital offerings. And it demonstrates how a family-owned company transformed its organization in order to be able to more effectively develop and provide digital offerings, while adding roles and developing technology platforms, as well as changing structures and ways of working.
Predictive maintenance information systems: the underlying conditions and technological aspects
(2020)
Predictive maintenance has the potential to improve the reliability of production and service provisioning. However, there is little knowledge about the proper implementation of predictive maintenance in research and practice. Therefore, we conducted a multi-case study and investigated underlying conditions and technological aspects for implementing a predictive maintenance system and where it leads to. We found that predictive maintenance initiatives are triggered by severe impacts of failures on revenue and profit. Furthermore, successful predictive maintenance initiatives require that pre-conditions are fulfilled: Data must be available and accessible. Very important is also the support by the management. We identified four factors important for the implementation of predictive maintenance. The integration of data is highly facilitated by Cloud-based mechanisms. The detection of events is enabled by advanced analytics. The execution of predictive maintenance operations is supported by data-driven process automation and visualization.
Endogenous electrical fields play an important role in various physiological and pathological events. Yet the effects of electrical cues on processes such as wound healing, tumor development or metastasis are still rarely investigated, though it is known that direct current electrical fields can alter cell migration or proliferation in vitro. Several 2D experimental models for studying cell responses to direct current electrical fields have been presented and characterized but suitable experimental models for electrotaxis studies in 3D are rare. Here we present a novel, easy-to-produce, multi-well-based galvanotactic-chamber for the use in 2D and 3D cell experiments for investigations on the influence of electrical fields on tumor cell migration and tumor spheroid growth. Our presented system allows the simultaneous application of electrical field to cells in four chambers, either cultured on the bottom of the culture-plate (2D) or embedded in hydrogel filled channels(3D). The set-up is also suitable for, live-cell-imaging. Validation tests show stable electrical fields and high cell viabilities inside the channel. Tumor spheroids of various diameters can be exposed to direct current electrical fields up to one week.
Industrielle Produktionseinrichtungen haben mit rund 40% einen signifikanten Anteil am Gesamtenergiebedarf in Deutschland. Daher wurden und werden sie sowohl technologisch als auch energetisch optimiert. Häufig geht die technologischwirtschaftliche Optimierung auch mit der Reduzierung des Energie und Materialverbrauchs einher. Zudem macht der Ausbau der regenerativen Energiequellen die Energieerzeugung zunehmend volatiler, sodass nicht nur die Senkung des absoluten Energieverbrauchs, sondern auch eine höhere Flexibilität (Steuerung der Leistung über der Zeit) zunehmend interessanter wird. Dadurch ändert sich oft die installierte Leistung sowie die Gestaltung der Verlustleistungsabfuhr, was die Dimensionierung von Anlagen, zum Beispiel von spanenden Werkzeugmaschinen, beeinflusst.
Tissue constructs of physiologically relevant scale require a vascular system to maintain cell viability. However, in vitro vascularization of engineered tissues is still a major challenge. Successful approaches are based on a feeder layer (FL) to support vascularization. Here, we investigated whether the supporting effect on the self‐assembled formation of prevascular‐like structures by microvascular endothelial cells (mvECs) originates from the FL itself or from its extracellular matrix (ECM). Therefore, we compared the influence of ECM, either derived from adipose‐derived stem cells (ASCs) or adipogenically differentiated ASCs, with the classical cell‐based FL. All cell‐derived ECM (cdECM) substrates enabled mvEC growth with high viability. Prevascular‐like structures were visualized by immunofluorescence staining of endothelial surface protein CD31 and could be observed on all cdECM and FL substrates but not on control substrate collagen I. On adipogenically differentiated ECM, longer and higher branched structures could be found compared with stem cell cdECM. An increased concentration of proangiogenic factors was found in cdECM substrates and FL approaches compared with controls. Finally, the expression of proteins associated with tube formation (E‐selectin and thrombomodulin) was confirmed. These results highlight cdECM as promising biomaterial for adipose tissue engineering by inducing the spontaneous formation of prevascular‐like structures by mvECs.
Gibt es einen Kauf-Knopf im Gehirn des Konsumenten? Und wenn ja, wie betätigt man diesen? Die Antworten auf diese Fragen könnte das Neuromarketing liefern. Das Neuromarketing ist Bestandteil der Neuroökonomie und eine relativ junge Disziplin an der Schnittstelle von Kognitionswissenschaften, Neurowissenschaften und der Marktforschung. Durch den technologischen Fortschritt können die Neurowissenschaften wichtige Erkenntnisse für das Marketing liefern, insbesondere Einblicke zur Erklärung des Konsumentenverhaltens. Durch den Blick in das Kundengehirn können beispielsweise Handelsunternehmen ihre Kunden gezielter ansprechen und sich so einen Vorteil gegenüber Konkurrenten verschaffen.
Zielgenau aus dem Hinterhalt
(2020)
Ambush-Marketing löst meistens heftige Reaktionen aus - bei Befürwortern und Gegnern. Die Idee des Ambush-Marketings ist es, von den Erfolgen des Sponsorings zu profitieren, ohne die Pflichten eines offiziellen Sponsors einzugehen. Ambusher besitzen keine Vermarktungsrechte an einer Veranstaltung, bauen aber dennoch durch ihre Marketingmassnahmen eine Verbindung zu einem Event auf. Der Grat zwischen der Verletzung von Sponsoren-Rechten und kreativ-innovativer Kommunikationspolitik ist dabei oft sehr schmal.
The development of new materials that mimic cartilage and its function is an unmet need that will allow replacing the damaged parts of the joints, instead of the whole joint. Polyvinyl alcohol (PVA) hydrogels have raised special interest for this application due to their biocompatibility, high swelling capacity and chemical stability. In this work, the effect of post-processing treatments (annealing, high hydrostatic pressure (HHP) and gamma-radiation) on the performance of PVA gels obtained by cast-drying was investigated and, their ability to be used as delivery vehicles of the anti-inflammatories diclofenac or ketorolac was evaluated. HHP damaged the hydrogels, breaking some bonds in the polymeric matrix, and therefore led to poor mechanical and tribological properties. The remaining treatments, in general, improved the performance of the materials, increasing their crystallinity. Annealing at 150 °C generated the best mechanical and tribological results: higher resistance to compressive and tensile loads, lower friction coefficients and ability to support higher loads in sliding movement. This material was loaded with the anti-inflammatories, both without and with vitamin E (Vit.E) or Vit.E + cetalkonium chloride (CKC). Vit.E + CKC helped to control the release of the drugs which occurred in 24 h. The material did not induce irritability or cytotoxicity and, therefore, shows high potential to be used in cartilage replacement with a therapeutic effect in the immediate postoperative period.
Für Educational Excellence muss die Ausbildung angehender Akademiker den Spagat zwischen Wissenschaft und Praxis meistern. Einfache Praktika u. a. klassische Ansätze reichen für Educational Excellence, angelehnt an die Anforderungen der Operational Excellence, nicht aus. Vorgestellt wird das an der ESB Business School der Hochschule Reutlingen seit vielen Jahren in der Wirtschaftsingenieurausbildung für Produktion und Logistik in einem Projekt-Masterstudiengang mit vielen Industriepartnern praktizierte kooperative Modell der Educational Excellence.
Papermaking waste liquid (black liquor) is a serious source of water pollution worldwide. The subsequent treatment of it is very difficult cause it contains a large amount of lignin, inorganic salts, organic matter, and pigments, which lead to serious water pollution. Lignin is the main by-product of the paper industry and is the only natural aromatic recyclable resource. Its effective utilization rate is currently less than 3%. Therefore, how to effectively recycle lignin in papermaking waste liquid and further synthesize industrialized products is of great significance to the sustainable development and environmental protection. Besides, based on the shortage of petroleum resources in recent years, the application of biomass resources instead of petroleum resources in the industry is also an important issue. In this article, we explored the best optimal conditions for the oxypropylation and esterification of lignin, and prepared bio-bitumen based on modified lignin, and then applied it to the waterproof coating sheets. FTIR and mechanical properties (softening point, low-temperature flexibility, peel strength, etc.) were tested on the obtained waterproof coating sheets. The results show that the addition of modified lignin reduced the softening point and peel strength of the coating sheets. Interestingly, both oxypropylated lignin (OL) and esterified lignin (OEL) were very beneficial to resist the decrease in peel strength during the aging process, showing a significant improvement in the performance of the coating sheets after aging compared to the control.
Die Produktindividualisierung, Digitalisierung und Automatisierung der Produktion erfordern eine ständige Anpassung der Produktions- und Intralogistikprozesse. Referenzmodelle unterstützen dabei Produktions- und Fabrikplaner mit Standards, Werkzeugen und vielem mehr. Eine Marktrecherche von Referenzmodellen zeigt erhebliche inhaltliche und methodische Unvollständigkeiten auf. Eine daraus abgeleitete Handlungsempfehlung für die Konstruktion eines Intralogistikreferenzmodells wir vorgestellt.
In einer guten Kunden-Lieferanten-Beziehung, geprägt von einer Win-Win-Situation, wird die Festlegung der Bestell- und Produktionslosgröße häufig diskutiert. Um die kostenoptimale Lösung für das Gesamtsystem zu finden, ist ein ganzheitlicher Ansatz auf Prozesskostenbasis erforderlich. In diesem Beitrag wird ein integrierter Ansatz zur Bestimmung der optimalen Losgröße dargestellt, der basierend auf einer prozesskostenbasierten Berechnung noch weitere Parameter miteinbezieht.
Background. We describe and provide an initial evaluation of the Climate Action Simulation, a simulation-based role playing game that enables participants to learn for themselves about the response of the climate-energy system to potential policies and actions. Participants gain an understanding of the scale and urgency of climate action, the impact of different policies and actions, and the dynamics and interactions of different policy choices.
Intervention. The Climate Action Simulation combines an interactive computer model, En-ROADS, with a role play in which participants make decisions about energy and climate policy. They learn about the dynamics of the climate and energy systems as they discover how En-ROADS responds to their own climate-energy decisions.
Methods. We evaluated learning outcomes from the Climate Action Simulation using pre- and post-simulation surveys as well as a focus group.
Results. Analysis of survey results showed that the Climate Action Simulation increases participants’ knowledge about the scale of emissions reductions and policies and actions needed to address climate change. Their personal and emotional engagement with climate change also grew. Focus group participants were overwhelmingly positive about the Climate Action Simulation, saying it left them feeling empowered to make a positive difference in addressing the climate challenge.
A holistic approach to digitization enables decision-makers to achieve new efficiency in corporate performance management. The digitalization improves the quality, validity and speed of information retrieval and processing. At present, most corporations are confronted with the problem of not being able to organize, categorize and visualize decision-relevant information. To meet the challenges of information management, the Management Cockpit provides an information center for managers. In accordance with the specific working environment of the executives, the Management Cockpit offers a quick and comprehensive overview of the company's situation. Today, the current situation of a company is no longer only influenced by internal factors, but also by its public image. Social media monitoring and analysis is therefore a crucial component for the external factors of successful management. Real-time monitoring of the emotions and behaviors of consumers and customers thus contributes to effective controlling of allbusiness areas. The intelligent factories promise to collect data for internal factors, but the current reality in manufacturing looks different. Production often consists of a large number of different machines, with varying degrees of digitization and limited sensor data availability. In order to close this gap, we developed a compact sensor board with network components, which allows a flexible design with different sensors for a wide variety of applications. The sensor data enable decision makers to adapt the supply chain based on their internal and external observations in the Management Cockpit. Due to the realtime and long-term monitoring and analytic possibilities the Management Cockpit provides a multi-dimensional view of the company and supports an holistic Corporate Performance Management.
Polyelectrolyte multilayer coatings (PEM) are prepared by alternative layer-by-layer deposition of cationic and anionic polyelectrolyte monolayers on charged surfaces. The thickness of the coatings ranges from nm to few μm. Their properties such as roughness, stiffness, surface charge and surface energy can be precisely tuned to fulfil different technical or biological requirements. The coating process is based on self-assembly of polyelectrolytes. Advantages of these coatings are their easy handling, no harsh chemistry and the possibility for coatings on complex geometries. The PEM coatings can be prepared from a variety of suitable polyelectrolytes. Their stability varies from very durable PEM coatings that are only soluble in strong solvents to quickly degradable, which may be applied as drug release system. One example of such a degradable PEM system is the one based on the polyelectrolyte pair Hyaluronan (HA) and Chitosan (CHI). These biopolymers originate from natural sources and show low toxicity towards human cells. However, HA/CHI multilayers show only weak adhesiveness for human umbilical vein endothelial cells (HUVEC). In this article, we summarize our approaches to enhance the HA/CHI multilayer by incorporation of a non-polymer substance –graphene oxide– to improve the cell adhesion and keep such properties as low cytotoxicity and biodegradability. Different approaches for incorporation of graphene oxide were performed and the cellular adhesion was tested by metabolic assay.
Dieser Beitrag gibt einen Überblick über die verschiedenen Möglichkeiten der Bilanzierung einens Initial Coin Offerings (ICO) beim Emittenten auf der Passivseite nach den Regelungen der IFRS. Ziel ist es, die bilanzielle Einordnung anhand verschiedenenr Arten von Token zu erörtern und den Emittenten bei der Ausgestaltung der Token sowie der anschließenden Bilanzierung zu unterstützen. Die Ergebnisse zeigen, dass die Standards für die bilanzielle Einordnung von ICO-Token zwar ausreichen, allerdings eine große Bandbreite der Bilanzierung zu berücksichtigen ist und eine detaillierte Regelung durch einen eigenen IFRS daher schwierig erscheint.
Drug-induced liver toxicity is one of the most common reasons for the failure of drugs in clinical trials and frequent withdrawal from the market. Reasons for such failures include the low predictive power of in vivo studies, that is mainly caused by metabolic differences between humans and animals, and intraspecific variances. In addition to factors such as age and genetic background, changes in drug metabolism can also be caused by disease-related changes in the liver. Such metabolic changes have also been observed in clinical settings, for example, in association with a change in liver stiffness, a major characteristic of an altered fibrotic liver. For mimicking these changes in an in vitro model, this study aimed to develop scaffolds that represent the rigidity of healthy and fibrotic liver tissue. We observed that liver cells plated on scaffolds representing the stiffness of healthy livers showed a higher metabolic activity compared to cells plated on stiffer scaffolds. Additionally, we detected a positive effect of a scaffold pre-coated with fetal calf serum (FCS)-containing media. This pre-incubation resulted in increased cell adherence during cell seeding onto the scaffolds. In summary, we developed a scaffold-based 3D model that mimics liver stiffness-dependent changes in drug metabolism that may more easily predict drug interaction in diseased livers.
Checklists are a valuable tool to ensure process quality and quality of care. To ensure proper integration in clinical processes, it would be desirable to generate checklists directly from formal process descriptions. Those checklists could also be used for user interaction in context-aware surgical assist systems. We built a tool to automatically convert Business Process Model and Notation (BPMN) process models to checklists displayed as HTML websites. Gateways representing decisions are mapped to checklist items that trigger dynamic content loading based on the placed checkmark. The usability of the resulting system was positively evaluated regarding comprehensibility and end-user friendliness.
Cardiovascular diseases are directly or indirectly responsible for up to 38.5% of all deaths in Germany and thus represent the most frequent cause of death. At present, heart diseases are mainly discovered by chance during routine visits to the doctor or when acute symptoms occur. However, there is no practical method to proactively detect diseases or abnormalities of the heart in the daily environment and to take preventive measures for the person concerned. Long-term ECG devices, as currently used by physicians, are simply too expensive, impractical, and not widely available for everyday use. This work aims to develop an ECG device suitable for everyday use that can be worn directly on the body. For this purpose, an already existing hardware platform will be analyzed, and the corresponding potential for improvement will be identified. A precise picture of the existing data quality is obtained by metrological examination, and corresponding requirements are defined. Based on these identified optimization potentials, a new ECG device is developed. The revised ECG device is characterized by a high integration density and combines all components directly on one board except the battery and the ECG electrodes. The compact design allows the device to be attached directly to the chest. An integrated microcontroller allows digital signal processing without the need for an additional computer. Central features of the evaluation are a peak detection for detecting R-peaks and a calculation of the current heart rate based on the RR interval. To ensure the validity of the detected R-peaks, a model of the anatomical conditions is used. Thus, unrealistic RR-intervals can be excluded. The wireless interface allows continuous transmission of the calculated heart rate. Following the development of hardware and software, the results are verified, and appropriate conclusions about the data quality are drawn. As a result, a very compact and wearable ECG device with different wireless technologies, data storage, and evaluation of RR intervals was developed. Some tests yelled runtimes up to 24 hours with wireless Lan activated and streaming.
In previous studies, we used a method for detecting stress that was based exclusively on heart rate and ECG for differentiation between such situations as mental stress, physical activity, relaxation, and rest. As a response of the heart to these situations, we observed different behavior in the Root Mean Square of the Successive differences heartbeats (RMSSD). This study aims to analyze Virtual Reality via a virtual reality headset as an effective stressor for future works. The value of the Root Mean Square of the Successive Differences is an important marker for the parasympathetic effector on the heart and can provide information about stress. For these measurements, the RR interval was collected using a breast belt. In these studies, we can observe the Root Mean Square of the successive differences heartbeats. Additional sensors for the analysis were not used. We conducted experiments with ten subjects that had to drive a simulator for 25 minutes using monitors and 25 minutes using virtual reality headset. Before starting and after finishing each simulation, the subjects had to complete a survey in which they had to describe their mental state. The experiment results show that driving using virtual reality headset has some influence on the heart rate and RMSSD, but it does not significantly increase the stress of driving.
Improvement of a three-layered in vitro skin model for topical application of irritating substances
(2020)
In the field of skin tissue engineering, the development of physiologically relevant in vitro skin models comprising all skin layers, namely epidermis, dermis, and subcutis, is a great challenge. Increasing regulatory requirements and the ban on animal experiments for substance testing demand the development of reliable and in vivo-like test systems, which enable high-throughput screening of substances. However, the reproducibility and applicability of in vitro testing has so far been insufficient due to fibroblast-mediated contraction. To overcome this pitfall, an advanced 3-layered skin model was developed. While the epidermis of standard skin models showed an 80% contraction, the initial epidermal area of our advanced skin models was maintained. The improved barrier function of the advanced models was quantified by an indirect barrier function test and a permeability assay. Histochemical and immunofluorescence staining of the advanced model showed well-defined epidermal layers, a dermal part with distributed human dermal fibroblasts and a subcutis with round-shaped adipocytes. The successful response of these advanced 3-layered models for skin irritation testing demonstrated the suitability as an in vitro model for these clinical tests: only the advanced model classified irritative and non-irritative substances correctly. These results indicate that the advanced set up of the 3-layered in vitro skin model maintains skin barrier function and therefore makes them more suitable for irritation testing.