Refine
Document Type
- Conference proceeding (31) (remove)
Language
- English (31) (remove)
Has full text
- yes (31)
Is part of the Bibliography
- yes (31)
Institute
- Informatik (25)
- ESB Business School (2)
- Texoversum (2)
- Life Sciences (1)
- Technik (1)
Publisher
- Hochschule Reutlingen (31) (remove)
Sleep analysis using a Polysomnography system is difficult and expensive. That is why we suggest a non-invasive and unobtrusive measurement. Very few people want the cables or devices attached to their bodies during sleep. The proposed approach is to implement a monitoring system, so the subject is not bothered. As a result, the idea is a non-invasive monitoring system based on detecting pressure distribution. This system should be able to measure the pressure differences that occur during a single heartbeat and during breathing through the mattress. The system consists of two blocks signal acquisition and signal processing. This whole technology should be economical to be affordable enough for every user. As a result, preprocessed data is obtained for further detailed analysis using different filters for heartbeat and respiration detection. In the initial stage of filtration, Butterworth filters are used.
This paper investigates the possibility to effectively monitor and control the respiratory action using a very simple and non invasive technique based on a single lightweight reduced-size wireless surface electromyography (sEMG) sensor placed below the sternum. The captured sEMG signal, due to the critical sensor position, is characterized by a low energy level and it is affected by motion artifacts and cardiac noise. In this work we present a preliminary study performed on adults for assessing the correlation of the spirometry signal and the sEMG signal after the removal of the superimposed heart signal. This study and the related findings could be useful in respiratory monitoring of preterm infants.
Determination of accelerometer sensor position for respiration rate detection: initial research
(2022)
Continuous monitoring of a patient's vital signs is essential in many chronic illnesses. The respiratory rate (RR) is one of the vital signs indicating breathing diseases. This article proposes the initial investigation for determining the accelerometric sensor position of a non-invasive and unobtrusive respiratory rate monitoring system. This research aims to determine the sensor position in relation to the patient, which can provide the most accurate values of the mentioned physiological parameter. In order to achieve the result, the particular system setup, including a mechanical sensor holder construction was used. The breathing signals from 5 participants were analyzed corresponding to the relaxed state. The main criterion for selecting a suitable sensor position was each patient's average acceleration amplitude excursion, which corresponds to the respiratory signal. As a result, we provided one more defined important parameter for the considered system, which was not determined before.
When wearing compressive garments, the tissue of the human body is altered in relation to its natural shape by the properties of the applied material and by the pattern construction used.
To check the fit of garments, both construction and selected materials can be virtually simulated in 3D on avatars in corresponding CAD programs before fabrication.
The software Blender allows the modelling of an avatar and to generate in respective to the different tissue zones with their specific properties to adjust them with soft body physics according to the testing of real soft tissue but the models in Blender are mainly using linear springs.
Imagine a world in which the search for tomorrow's trends of (software) products is not subject to a long and laborious data search but is possible with a single mouse click. Through the use of artificial intelligence (AI), this reality is made possible and is to be further advanced through research. The study therefore aims to provide an initial overview of the young research field. Based on research, expert interviews, company and student surveys, current application possibilities of AI in the innovation process (defined as Smart Innovation), existing challenges that slow down the further development are discussed in more detail and future application possibilities are presented. Finally, a recommendation for action is made for business, politics and science to help overcome the current obstacles together and thus drive the future of Smart Innovation.
Semi-automated image data labelling using AprilTags as a pre-processing step for machine learning
(2019)
Data labelling is a pre-processing step to prepare data for machine learning. There are many ways to collect and prepare this data, but these are usually associated with a greater effort. This paper presents an approach to semi-automated image data labelling using AprilTags. The AprilTags attached to the object, which contain a unique ID, make it possible to link the object surfaces to a particular class. This approach will be implemented and used to label data of a stackable box.
The data is evaluated by training a You Only Look Once (YOLO) net, with a subsequent evaluation of the detection results. These results show that the semi-automatically collected and labelled data can certainly be used for machine learning. However, if concise features of an object surface are covered by the AprilTag, there is a risk that the concerned class will not be recognized. It can be assumed that the labelled data can not only be used for YOLO, but also for other machine learning approaches.
Strategy to test mobile apps
(2014)
Nowadays the development of a mobile app implies challenges and difficulties, which have to be faced by mobile app developers. Innovations lead to a rapidly evolving mobile app market, therefore apps should be developed faster and offered in short release cycles to the market. Testing is a decisive activity within the development process that helps to improve the quality of the app. This research paper describes a strategy to test mobile apps that overcomes the challenges that mobile apps confront and permits to test the app in a structural test environment.
Detecting semantic similarities between sentences is still a challenge today due to the ambiguity of natural languages. In this work, we propose a simple approach to identifying semantically similar questions by combining the strengths of word embeddings and Convolutional Neural Networks (CNNs). In addition, we demonstrate how the cosine similarity metric can be used to effectively compare feature vectors. Our network is trained on the Quora dataset, which contains over 400k question pairs. We experiment with different embedding approaches such as Word2Vec, Fasttext, and Doc2Vec and investigate the effects these approaches have on model performance. Our model achieves competitive results on the Quora dataset and complements the well-established evidence that CNNs can be utilized for paraphrase recognition tasks.
The importance of sleep for human life is enormous. It affects physical, mental, and psychological health. Therefore, it is vital to recognise sleep disorders in a timely manner in order to be able to initiate therapy. There are two methods for measuring sleep-related parameters - objective and subjective. Whether the substitution of a subjective method for an objective one is possible is investigated in this paper. Such replacement may bring several advantages, including increased comfort for the user. To answer this research question, a study was conducted in which 75 overnight recordings were evaluated. The primary purpose of this study was to compare both ways of measurement for total sleep time and sleep efficiency, which are essential parameters for, e.g., insomnia diagnosis and treatment. The evaluation results demonstrated that, on average, there are 32 minutes of difference between the two measurement methods when total sleep time is analysed. In contrast, on average, both measurement methods differ by 7.5% for sleep efficiency measurement. It should also be noted that people typically overestimate total sleep time and efficiency with the subjective method, where the perceived values are measured.
Sleep is essential to existence, much like air, water, and food, as we spend nearly one-third of our time sleeping. Poor sleep quality or disturbed sleep causes daytime solemnity, which worsens daytime activities' mental and physical qualities and raises the risk of accidents. With advancements in sensor and communication technology, sleep monitoring is moving out of specialized clinics and into our everyday homes. It is possible to extract data from traditional overnight polysomnographic recordings using more basic tools and straightforward techniques. Ballistocardiogram is an unobtrusive, non-invasive, simple, and low-cost technique for measuring cardiorespiratory parameters. In this work, we present a sensor board interface to facilitate the communication between force sensitive resistor sensor and an embedded system to provide a high-performing prototype with an efficient signal-to-noise ratio. We have utilized a multi-physical-layer approach to locate each layer on top of another, yet supporting a low-cost, compact design with easy deployment under the bed frame.
Integrating tools and applications into a clinically useful system for individual continuous health data surveillance requires an architecture considering all relevant medical and technical conditions. Therefore, the requirements of an integrated system including a health app to collect and monitor sensor data to support personalized medicine are analyzed. The structure and behavior of the system are defined regarding the specific health use cases and scenarios. A vendor-independent architecture, which enables the collection of vital data from arbitrary wearables using a smartphone, is presented. The data is centrally managed and processed by attending physicians. The modular architecture allows the system to extend to new scenarios, data formats, etc. A prototypical implementation of the system shows the feasibility of the approach.
A clinically useful system for individual continuous health data monitoring needs an architecture that takes into account all relevant medical and technical conditions. The requirements for a health app to support such a system are collected, and a vendor independent architecture is designed that allows the collection of vital data from arbitrary wearables using a smartphone. A prototypical implementation for the main scenario shows the feasibility of the approach.
The aim of this paper is to show to what extent Artificial Intelligence can be used to optimize forecasting capability in procurement as well as to compare AI with traditional statistic methods. At the same time this article presents the status quo of the research project ANIMATE. The project applies Artificial Intelligence to forecast customer orders in medium-sized companies.
Precise forecasts are essential for companies. For planning, decision making and controlling. Forecasts are applied, e.g. in the areas of supply chain, production or purchasing. Medium-sized companies have major challenges in using suitable methods to improve their forecasting ability.
Companies often use proven methods such as classical statistics as the ARIMA algorithm. However, simple statistics often fail while applied for complex non-linear predictions.
Initial results show that even a simple MLP ANN produces better results than traditional statistic methods. Furthermore, a baseline (Implicit Sales Expectation) of the company was used to compare the performance. This comparison also shows that the proposed AI method is superior.
Until the developed method becomes part of corporate practice, it must be further optimized. The model has difficulties with strong declines, for example due to holidays. The authors are certain that the model can be further improved. For example, through more advanced methods, such as a FilterNet, but also through more data, such as external data on holiday periods.
Generating synthetic data is a relevant point in the machine learning community. As accessible data is limited, the generation of synthetic data is a significant point in protecting patients' privacy and having more possibilities to train a model for classification or other machine learning tasks. In this work, some generative adversarial networks (GAN) variants are discussed, and an overview is given of how generative adversarial networks can be used for data generation in different fields. In addition, some common problems of the GANs and possibilities to avoid them are shown. Different evaluation methods of the generated data are also described.
Due to the rising need for palliative care in Russia, it is crucial to provide timely and high-quality solutions for patients, relatives, and caregivers. A methodology for remote monitoring of patients in need of palliative care and the requirements will be developed for a hardware-software complex for remote monitoring of patients' health at home.
There are several intra-operative use cases which require the surgeon to interact with medical devices. I used the Leap Motion Controller as input device for three use-cases: 2D-interaction (e.g. advancing EPR data), selection of a value (e.g. room illumination brightness) and an application point and click scenario. I evaluated the Palm Mouse as the most suitable gesture solution to coordinate the mouse and advise to use the implementation using all fingers to perform a click. This small case study introduces the implementations and methods that result those recommendations.
A MATLAB toolbox was developed both for teachers performing quick experimental demonstrations during lectures and for students practicing measurement and frequency analysis procedures. The conceptual purpose was to support fundamental acoustics courses with contents defined by the DEGA recommendation 102. All implemented functions and parameters are visible at once and quickly adjustable by a GUI without submenus. A user manual is provided with explanations of how to get started and how all implemented functions can be applied. The toolbox probably still contains bugs. All users are welcome to inform the author about their experiences and proposals for improvement. In future it is planned to convert "Acoustics" to the MATLAB app designer format as Mathworks announced GUIDE to be replaced. Useful extensions would be additional tabs containing animations of sound propagation phenomena or sound fields caused by different sources.