Refine
Year of publication
- 2017 (104) (remove)
Document Type
- Journal article (104) (remove)
Is part of the Bibliography
- yes (104)
Institute
- ESB Business School (48)
- Life Sciences (23)
- Technik (15)
- Informatik (12)
- Texoversum (6)
Publisher
- Springer (22)
- Elsevier (16)
- Wiley (5)
- IOP Publishing (4)
- VDE Verlag (4)
- American Marketing Association (3)
- IEEE (3)
- Royal Society of Chemistry (3)
- Thexis Verlag (3)
- De Gruyter (2)
Background. The application of lean management is standard in many companies all over the world. It is used to continuously optimise existing production processes and to reduce the complexity of administrative processes. Unfortunately, in higher education, the awareness of lean management as a highly effective methodology is quite low.
Research aims. The research aim is to show how the lean strategy can be applied in university environments. Finally, this paper addresses the question why it is so difficult to implement lean in a university environment and how an institution of higher education can move forward towards becoming a lean university.
Methodology. Based on a literature review, five key lean principles are presented and examples of their implementation are discussed using short case studies from our own institution. We also compare our findings with those in the literature.
Key findings. Lean offers the chance to improve the management of higher education institutions. This requires a commitment on the part of the university top management aiming at convincing all stakeholders that a culture of lean helps the institution to be able to adapt to the rapidly changing environment of higher education.
Thematic issue on human-centred ambient intelligence: cognitive approaches, reasoning and learning
(2017)
This editorial presents advances on human-centred Ambient Intelligence applications which take into account cognitive issues when modelling users (i.e. stress, attention disorders), and learn users’ activities/preferences and adapt to them (i.e. at home, driving a car). These papers also show AmI applications in health and education, which make them even more valuable for the general society.
Ziel eines aktuellen Forschungsprojektes an der Hochschule Reutlingen, das gemeinsam mit dem Ingenieurbüro Ganssloser und der Universität Tübingen durchgeführt wird, ist es, Flexibilitäten in Unternehmen, die im Verbund als virtuelles Kraftwerk am Strommarkt agieren, zu erkennen und nutzbar zu machen. Zu diesem Zweck soll eine Steuerbox für Industrie- und Gewerbebetriebe entwickelt werden, die einerseits mit der zentralen Leitwarte des virtuellen Kraftwerks kommuniziert und andererseits die Anlagen des Unternehmens so steuert, dass die zur Verfügung stehenden Flexibilitäten möglichst optimal genutzt werden. Die Hochschule Reutlingen beschäftigt sich innterhalb des Projekts mit der Erkennung und Beschreibung von Flexibilitäten in Unternehmen.
We were able to identify a set of specific capabilities corporations need to develop in order to enhance brand love. Furthermore, the effects of most dynamic capabilities on brand love have a strong correlation to the degree of customer orientation. Other results are relevant concerning the proposed moderation and mediation hypotheses. Firstly, the impact of customer orientation on brand love is varied under specific market conditions, supporting our central moderation hypothesis (β = .259, p = .001). To be precise, the impact of customer orientation is strongest in markets that have low competitive differentiation in products and services. Other control variables like age, gender, or market form (B2B versus B2C) lead to no significant heterogeneity in the data set. Finally, mediation analyses show no significant “direct effect” of the existing DC constructs on brand love, supporting the mediating role of customer orientation.
Royal Philip's goal was to use innovation to improve the lives of three billion people a year by 2025. To reach that goal, the company was shifting from selling medical products in a transactional manner to providing integrated healthcare solutions based on digital health technology ("HealthTech").
This shift required a dual transformation. On one hand, the company needed to transform how healthcare was conducted. Healthcare professionals would have to change the way they worked and reimbursement schemes needed to change to incentivize payers, providers, and patients in vastly different ways. On the other hand, Philips needed to redesign how it worked internally. The company componentized its business, introduced digital platforms, and co-created solutions with the various stakeholders of the healthcare industry.
In other words: Royal Philips was transforming itself in order to reinvent healthcare in the digital age.
Electronic word-of-mouth (eWoM) communication has received a lot of attention from the academic community. As multiple research papers focus on specific facets of eWoM, there is a need to integrate current research results systematically. Thus, this paper presents a scientific literature analysis in order to determine the current state-of-the-art in the field of eWoM.
Pokémon Go was the first mobile augmented reality (AR) game to reach the top of the download charts of mobile applications. However, little is known about this new generation of mobile online AR games. Existing theories provide limited applicability for user understanding. Against this background, this research provides a comprehensive framework based on uses and gratification theory, technology risk research, and flow theory. The proposed framework aims to explain the drivers of attitudinal and intentional reactions, such as continuance in gaming or willingness to invest money in in-app purchases. A survey among 642 Pokémon Go players provides insights into the psychological drivers of mobile AR games. The results show that hedonic, emotional, and social benefits and social norms drive consumer reactions while physical risks (but not data privacy risks) hinder consumer reactions. However, the importance of these drivers differs depending on the form of user behavior.
How to separate the wheat from the chaff: improved variable selection for new customer acquisition
(2017)
Steady customer losses create pressure for firms to acquire new accounts, a task that is both costly and risky. Lacking knowledge about their prospects, firms often use a large array of predictors obtained from list vendors, which in turn rapidly creates massive high-dimensional data problems. Selecting the appropriate variables and their functional relationships with acquisition probabilities is therefore a substantial challenge. This study proposes a Bayesian variable selection approach to optimally select targets for new customer acquisition. Data from an insurance company reveal that this approach outperforms nonselection methods and selection methods based on expert judgment as well as benchmarks based on principal component analysis and bootstrap aggregation of classification trees. Notably, the optimal results show that the Bayesian approach selects panel-based metrics as predictors, detects several nonlinear relationships, selects very large numbers of addresses, and generates profits. In a series of post hoc analyses, the authors consider prospects’ response behaviors and cross selling potential and systematically vary the number of predictors and the estimated profit per response. The results reveal that more predictors and higher response rates do not necessarily lead to higher profits.
Characterisation of porous knitted titanium for replacement of intervertebral disc nucleus pulposus
(2017)
Effective restoration of human intervertebral disc degeneration is challenged by numerous limitations of the currently available spinal fusion and arthroplasty treatment strategies. Consequently, use of artificial biomaterial implant is gaining attention as a potential therapeutic strategy. Our study is aimed at investigating and characterizing a novel knitted titanium (Ti6Al4V) implant for the replacement of nucleus pulposus to treat early stages of chronic intervertebral disc degeneration. Specific knitted geometry of the scaffold with a porosity of 67.67 ± 0.824% was used to overcome tissue integration failures. Furthermore, to improve the wear resistance without impairing original mechanical strength, electro-polishing step was employed. Electro-polishing treatment changed a surface roughness from 15.22 ± 3.28 to 4.35 ± 0.87 μm without affecting its wettability which remained at 81.03 ± 8.5°. Subsequently, cellular responses of human mesenchymal stem cells (SCP1 cell line) and human primary chondrocytes were investigated which showed positive responses in terms of adherence and viability. Surface wettability was further enhanced to super hydrophilic nature by oxygen plasma treatment, which eventually caused substantial increase in the proliferation of SCP1 cells and primary chondrocytes. Our study implies that owing to scaffolds physicochemical and biocompatible properties, it could improve the clinical performance of nucleus pulposus replacement.
A wide variety of cell types exhibit substrate topography-based behavior, also known as contact guidance. However, the precise cellular mechanisms underlying this process are still unknown. In this study, we investigated contact guidance by studying the reaction of human endothelial cells (ECs) to well-defined microgroove topographies, both during and after initial cell spreading. As the cytoskeleton plays a major role in cellular adaptation to topographical features, two methods were used to perturb cytoskeletal structures. Inhibition of actomyosin contractility with the chemical inhibitor blebbistatatin demonstrated that initial contact guidance events are independent of traction force generation. However, cell alignment to the grooved substrate was altered at later time points, suggesting an initial ‘passive’ phase of contact guidance, followed by a contractility-dependent ‘active’ phase that relies on mechanosensitive feedback. The actin cytoskeleton was also perturbed in an indirect manner by culturing cells upside down, resulting in decreased levels of contact guidance and suggesting that a possible loss of contact between the actin cytoskeleton and the substrate could lead to cytoskeleton impairment. The process of contact guidance at the microscale was found to be primarily lamellipodia driven, as no bias in filopodia extension was observed on micron-scale grooves.
Intermediate filament reorganization dynamically influences cancer cell alignment and migration
(2017)
The interactions between a cancer cell and its extracellular matrix (ECM) have been the focus of an increasing amount of investigation. The role of the intermediate filament keratin in cancer has also been coming into focus of late, but more research is needed to understand how this piece fits in the puzzle of cytoskeleton-mediated invasion and metastasis. In Panc-1 invasive pancreatic cancer cells, keratin phosphorylation in conjunction with actin inhibition was found to be sufficient to reduce cell area below either treatment alone. We then analyzed intersecting keratin and actin fibers in the cytoskeleton of cyclically stretched cells and found no directional correlation. The role of keratin organization in Panc-1 cellular morphological adaptation and directed migration was then analyzed by culturing cells on cyclically stretched polydimethylsiloxane (PDMS) substrates, nanoscale grates, and rigid pillars. In general, the reorganization of the keratin cytoskeleton allows the cell to become more ‘mobile’- exhibiting faster and more directed migration and orientation in response to external stimuli. By combining keratin network perturbation with a variety of physical ECM signals, we demonstrate the interconnected nature of the architecture inside the cell and the scaffolding outside of it, and highlight the key elements facilitating cancer cell-ECM interactions.
AUDI AG has historically focused on producing and selling premium vehicles but has begun to experiment with providing mobility services, built around car sharing. Its response to the so-called sharing economy addressed strategic and transformational challenges. Strategically, the company pursued additional sources of revenue from targeted, premium mobility services, rather than the less segmented services provided by competitors such as BMW and Zipcar. AUDI AG also transformed its organizational structure, processes and architecture to balance autonomy for innovation and integration for competitiveness.
Cell-cell and cell-extracellular matrix (ECM) adhesion regulates fundamental cellular functions and is crucial for cell-material contact. Adhesion is influenced by many factors like affinity and specificity of the receptor-ligand interaction or overall ligand concentration and density. To investigate molecular details of cell ECM and cadherins (cell-cell) interaction in vascular cells functional nanostructured surfaces were used Ligand-functionalized gold nanoparticles (AuNPs) with 6-8 nm diameter, are precisely immobilized on a surface and separated by non-adhesive regions so that individual integrins or cadherins can specifically interact with the ligands on the AuNPs. Using 40 nm and 90 nm distances between the AuNPs and functionalized either with peptide motifs of the extracellular matrix (RGD or REDV) or vascular endothelial cadherins (VEC), the influence of distance and ligand specificity on spreading and adhesion of endothelial cells (ECs) and smooth muscle cells (SMCs) was investigated. We demonstrate that RGD-dependent adhesion of vascular cells is similar to other cell types and that the distance dependence for integrin binding to ECM-peptides is also valid for the REDV motif. VEC-ligands decrease adhesion significantly on the tested ligand distances. These results may be helpful for future improvements in vascular tissue engineering and for development of implant surfaces.
The European Economic and Monetary Union (EMU) has been in turmoil for more than six years. The present governance rules do not seem to solve the problems neither permanently nor effectively. There is no vision about the future of Europe in the 21st century. This article describes a realignment of the economic governance, which does not necessarily lead to a transfer or political union. However, it solves the current and future challenges. In fact, the redesign of present rules is the most likely as well as legally and economically option today. The key ideais the detachment from the compulsive idea of an ever closer union. However, this vision requires boldness towards greater flexibility together with an exit clause or a state insolvency procedure for incompliant member states.
Saving energy and road safety became important in the last decades, hence several driving assistant systems were developed that help to improve the driving behaviour. However, these driving systems cover the area of either energy-efficiency or safety. Furthermore, they do not consider the reaction of the driver to a shown recommendation and the driver stress level. In this paper, the decision process of showing a recommendation to the driver in an energy-efficient and safety relevant driving system is presented. The decision process considers the driver's reaction to a shown recommendation and the driver stress in order to increase the user acceptance and the road safety. The results of the evaluation showed that the driving system was able to show recommendations when needed, while suppressing recommendations when the driver ignored a recommendation repeatedly or when the driver was in stress.
Introducing continuous experimentation in large software-intensive product and service organisations
(2017)
Software development in highly dynamic environments imposes high risks to development organizations. One such risk is that the developed software may be of only little or no value to customers, wasting the invested development efforts.Continuous experiment ation, as an experiment-driven development approach, may reduce such development risks by iteratively testing product and service assumptions that are critical to the success of the software. Although several experiment-driven development approaches are available, there is little guidance available on how to introduce continuous experimentation into an organization. This article presents a multiple-case study that aims at better understanding the process of introducing continuous experimentation into an organization with an already established development process. The results from the study show that companies are open to adopting such an approach and learning throughout the introduction process. Several benefits were obtained, such as reduced development efforts, deeper customer insights, and better support for development decisions. Challenges included complex stakeholder structures, difficulties in defining success criteria, and building experimen- tation skills. Our findings indicate that organizational factors may limit the benefits of experimentation. Moreover, introducing continuous experimentation requires fundamental changes in how companies operate, and a systematic introduction process can increase the chances of a successful start.
To evaluate the quality of sleep, it is important to determine how much time was spent in each sleep stage during the night. The gold standard in this domain is an overnight polysomnography (PSG). But the recording of the necessary electrophysiological signals is extensive and complex and the environment of the sleep laboratory, which is unfamiliar to the patient, might lead to distorted results. In this paper, a sleep stage detection algorithm is proposed that uses only the heart rate signal, derived from electrocardiogram (ECG), as a discriminator. This would make it possible for sleep analysis to be performed at home, saving a lot of effort and money. From the heart rate, using the fast Fourier transformation (FFT), three parameters were calculated in order to distinguish between the different sleep stages. ECG data along with a hypnogram scored by professionals was used from Physionet database, making it easy to compare the results. With an agreement rate of 41.3%, this approach is a good foundation for future research.
Zukünftige Montagearbeitsplätze müssen veränderten Herausforderungen, wie z. B. der zunehmenden Anzahl von Mensch Roboter-Kollaborationen, gerecht werden. Die Virtual Reality (VR)-Technik bietet im Rahmen der Arbeitsplatzgestaltung neue Möglichkeiten, diesen veränderten Planungsherausforderungen gerecht zu werden. Die Ausarbeitung stellt eine Methode zur Bewertung des sinnvollen Einsatzes der VR-Technik für einen spezifischen Arbeitsplatz vor. Außerdem wird aufgezeigt, wie die VR-Technik in den Prozess der Arbeitsplatzgestaltung integriert werden kann.
LDMOS transistors in integrated power technologies are often subject to thermo-mechanical stress, which degrades the on-chip metallization and eventually leads to a short. This paper investigates small sense lines embedded in the LDMOS metallization. It will be shown that their resistance depends strongly on the stress cycle number. Thus, they can be used as aging sensors and predict impending failures. Different test structures have been investigated to identify promising layout configurations. Such sensors are key components for resilient systems that adaptively reduce stress to allow aggressive LDMOS scaling without increasing the risk of failure.
Die weiterhin hohen Schulden in einigen Staaten der Europäischen Wirtschafts- und Währungsunion lassen nach wie vor staatliche Insolvenzen befürchten. Um die entstandenen Probleme zu bewältigen, aber auch damit eine solche Situation erst gar nicht eintritt, hält der Autor eine staatliche Insovenzordnung – mit Bail-out durch die anderen Mitgliedstaaten nur in Notfällen – für erforderlich. Er schlägt einen staatlichen Abwicklungsmechanismus für überschuldete Euro-Länder vor, der auf einem Konzept des Sachverständigenrates für Wirtschaft von 2016 beruht.
Electric freight vehicles have the potential to mitigate local urban road freight transport emissions, but their numbers are still insignificant. Logistics companies often consider electric vehicles as too costly compared to vehicles powered by combustion engines. Research within the body of the current literature suggests that increasing the driven mileage can enhance the competitiveness of electric freight vehicles. In this paper we develop a numeric simulation approach to analyze the cost-optimal balance between a high utilization of medium-duty electric vehicles – which often have low operational costs – and the common requirement that their batteries will need expensive replacements. Our work relies on empirical findings of the real-world energy consumption from a large German field test with medium-duty electric vehicles. Our results suggest that increasing the range to the technical maximum by intermediate (quick) charging and multi-shift usage is not the most cost-efficient strategy in every case. A low daily mileage is more cost-efficient at high energy prices or consumptions, relative to diesel prices or consumptions, or if the battery is not safeguarded by a long warranty. In practical applications our model may help companies to choose the most suitable electric vehicle for the application purpose or the optimal trip length from a given set of options. For policymakers, our analysis provides insights on the relevant parameters that may either reduce the cost gap at lower daily mileages, or increase the utilization of medium-duty electric vehicles, in order to abate the negative impact of urban road freight transport on the environment.
Though bioprinting is a forward-looking approach in bone tissue engineering, the development of bioinks which are on the one hand processable with the chosen printing technique, and on the other hand possess the relevant mechanical as well as osteoconductive features remains a challenge. In the present study, polymer solutions based on methacrylated gelatin and methacrylated hyaluronic acid modified with hydroxyapatite (HAp) particles (5 wt%) were prepared. Encapsulation of primary human adipose derived stem cells in the HAp-containing gels and culture for 28 d resulted in a storage moduli significantly increased to 126% ± 9.6% compared to the value on day 1 by the sole influence of the HAp. Additional use of osteogenic media components resulted in an increase of storage module up to 199% ± 27.8%. Similarly, the loss moduli was increased to 370% ± 122.1% under the influence of osteogenic media components and HAp. Those changes in rheological material characteristics indicate a distinct change in elastic and viscous hydrogel properties, and are attributed to extensive matrix production in the hydrogels by the encapsulated cells, what could also be proven by staining of bone matrix components like collagen I, fibronectin, alkaline phosphatase and osteopontin. When using the cell-laden polymer solutions as bioinks to build up relevant geometries, the ink showed excellent printability and the printed grid structure's integrity remained intact over a culture time of 28 d. Again, an intense matrix formation as well as upregulation of osteogenic markers by the encapsulated cells could be shown. In conclusion, we demonstrated that our HAp-containing bioinks and hydrogels on basis of methacrylated gelatin and hyaluronic acid are on the one hand highly suitable for the build up of relevant three-dimensional geometries with microextrusion bioprinting, and on the other hand exhibit a significant positive effect on bone matrix development and remodeling in the hydrogels, as indicated by rheological measurements and staining of bone components. This makes the developed composite hydrogels an excellent material for bone bioprinting approaches.
This paper studies whether a monetary union can be managed solely by a rule based approach. The Five Presidents’ Report of the European Union rejects this idea. It suggests a centralisation of powers. We analyse the philosophy of policy rules from the vantage point of the German economic school of thought. There is evidence that a monetary union consisting of sovereign states is well organised by rules, together with the principle of subsidiarity. The root cause of the euro crisis is rather the weak enforcement of rules, compounded by structural problems. Therefore, we suggest a genuine rule-based paradigm for a stable future of the Economic and Monetary Union.
The purpose of this paper is to study the impact of transparency on the political budget cycle (PBC) over time and across countries. So far, the literature on electoral cycles finds evidence that cycles depend on the stage of an economy. However, the author shows – for the first time – a reliance of the budget cycle on transparency. The author uses a new data set consisting of 99 developing and 34 Organization for Economic Cooperation and Development countries. First, the author develops a model and demonstrates that transparency mitigates the political cycles. Second, the author confirms the proposition through the econometric assessment. The author uses time series data from 1970 to 2014 and discovers smaller cycles in countries with higher transparency, especially G8 countries.
In retail environments, consumers commonly evaluate products while standing on some type of flooring and concurrently being exposed to music; however, no study has examined the interaction of these two atmospheric cues. To bridge this gap, this research examines whether retailers can benefit from creating multisensory atmospheric congruent rather than incongruent retail environments of flooring and music. The results of an experiment in a real retail store reveal positive effects of multisensory congruent retail environments (e.g., soft music combined with soft flooring) on product evaluations. This study provides a new process explanation with consumers’ purchase-related self-confidence mediating these effects. Specifically, consumers in congruent rather than incongruent retail environments experience more purchase-related self confidence, which in turn leads to more favorable product evaluations. Furthermore, this study shows that consumers with a low rather than a high preference for haptic information are influenced more by multisensory atmospheric congruence when evaluating a product haptically.
Structural and functional thermosetting composite materials are exposed to different kinds of stress which can damage the polymer matrix, thus impairing the intended properties. Therefore, self-healing materials have attracted the attention of many research groups over the last decades in order to provide satisfactory material properties and outstanding product durability. The present article provides a critical overview of promising self-healing strategies for crosslinked thermoset polymers. It is organized in two parts: an overview about the different approaches to self-healing is given in the first part, whereas the second part focuses on the specific chemistries of the main strategies to achieve self-healing through crosslinking. It is attempted to provide a comprehensive discussion of different approaches which are described in the scientific literature. By comparison of the advantages and disadvantages, the authors wish to provide helpful insights on the assessment of the potential to transfer the extensive present knowledge about self-healing materials and methods to surface varnishing thermoset coatings.
This article provides a general overview of the most promising candidates of bio based materials and deals with the most important issues when it comes to their incorporation into PF resins. Due to their abundance on Earth, much knowledge of lignin-based materials has already been gained and uses of lignin in PF resins have been studied for many decades. Other natural polyphenols that are less frequently considered for impregnation are covered as well, as they do also possess some potential for PF substitution.
High quality decorative laminate panels typically consist of two major types of components: the surface layers comprising décor and overlay papers that are impregnated with melamine-based resins, and the core which is made of stacks of kraft papers impregnated with phenolic (PF) resin. The PF-impregnated layers impart superior hydrolytic stability, mechanical strength and fire-resistance to the composite. The manufacturing involves the complex interplay between resin, paper and impregnation/drying processes. Changes in the input variables cause significant alterations in the process characteristics and adaptations of the used materials and specific process conditions may, in turn, be required. This review summarizes the main variables influencing both processability and technological properties of phenolic resin impregnated papers and laminates produced therefrom. It is aimed at presenting the main influences from the involved components (resin and paper), how these may be controlled during the respective process steps (resin preparation and paper production), how they influence the impregnation and lamination conditions, how they affect specific aspects of paper and laminate performance, and how they interact with each other
(synergies).
Context: Development of software intensive products and services increasingly occurs by continuously deploying product or service increments, such as new features and enhancements, to customers. Product and service developers must continuously find out what customers want by direct customer feedback and usage behaviour observation. Objective: This paper examines the preconditions for setting up an experimentation system for continuous customer experiments. It describes the RIGHT model for Continuous Experimentation (Rapid Iterative value creation Gained through High-frequency Testing), illustrating the building blocks required for such a system. Method: An initial model for continuous experimentation is analytically derived from prior work. The model is matched against empirical case study findings from two startup companies and further developed. Results: Building blocks for a continuous experimentation system and infrastructure are presented. Conclusions: A suitable experimentation system requires at least the ability to release minimum viable products or features with suitable instrumentation, design and manage experiment plans, link experiment results with a product roadmap, and manage a flexible business strategy. The main challenges are proper, rapid design of experiments, advanced instrumentation of software to collect, analyse, and store relevant data, and the integration of experiment results in both the product development cycle and the software development process.
Software engineering education is under constant pressure to provide students with industry-relevant knowledge and skills. Educators must address issues beyond exercises and theories that can be directly rehearsed in small settings. Industry training has similar requirements of relevance as companies seek to keep their workforce up to date with technological advances. Real-life software development often deals with large, software-intensive systems and is influenced by the complex effects of teamwork and distributed software development, which are hard to demonstrate in an educational environment. A way to experience such effects and to increase the relevance of software engineering education is to apply empirical studies in teaching. In this paper, we show how different types of empirical studies can be used for educational purposes in software engineering. We give examples illustrating how to utilize empirical studies, discuss challenges, and derive an initial guideline that supports teachers to include empirical studies in software engineering courses. Furthermore, we give examples that show how empirical studies contribute to high-quality learning outcomes, to student motivation, and to the awareness of the advantages of applying software engineering principles. Having awareness, experience, and understanding of the actions required, students are more likely to apply such principles under real-life constraints in their working life.
In vitro composed vascularized adipose tissue is and will continue to be in great demand e.g. for the treatment of extensive high-graded burns or the replacement of tissue after tumor removal. Up to date, the lack of adequate culture conditions, mainly a culture medium, decelerates further achievements. In our study, we evaluated the influence of epidermal growth factor (EGF) and hydrocortisone (HC), often supplemented in endothelial cell (EC) specific media, on the co-culture of adipogenic differentiated adipose derived stem cells (ASCs) and microvascular endothelial cells (mvECs). In ASCs, EGF and HC are thought to inhibit adipogenic differentiation and have lipolytic activities. Our results showed that in indirect co-culture for 14 days, adipogenic differentiated ASCs further incorporated lipids and partly gained an univacuolar morphology when kept in media with low levels of EGF and HC. In media with high EGF and HC levels, cells did not incorporate further lipids, on the contrary, cells without lipid droplets appeared. Glycerol release, to measure lipolysis, also increased with elevated amounts of EGF and HC in the culture medium. Adipogenic differentiated ASCs were able to release leptin in all setups. MvECs were functional and expressed the cell specific markers, CD31 and von Willebrand factor (vWF), independent of the EGF and HC content as long as further EC specific factors were present. Taken together, our study demonstrates that adipogenic differentiated ASCs can be successfully co-cultured with mvECs in a culture medium containing low or no amounts of EGF and HC, as long as further endothelial cell and adipocyte specific factors are available.
Decreasing batch sizes in production in line with Industrie 4.0 will lead to tremendous changes of the control of logistic processes in future production systems. Intelligent bins are crucial enablers to establish decentrally controlled material flow systems in value chain networks as well as at the intralogistics level. These intelligent bins have to be integrated into an overall decentralized monitoring and control approach and have to interact with humans and other entities just like other cyber-physical systems (CPS) within the cyber-physical production system (CPPS). To realize a decentralized material supply following the overall aim of a decentralized control of all production and logistics processes, an intelligent bin system is currently developed at the ESB Logistics Learning Factory. This intelligent bin system will be integrated into the self developed, cloud-based and event-oriented SES system (so-called “Self Execution System”) which goes beyond the common functionalities and capabilities of traditional manufacturing execution systems (MES).
To ensure a holistic integration of the intelligent bin for different material types into the SES framework, the required hard- and software components for the decentrally controlled bin system will be split into a common and an adaptable component. The common component represents the localization and network layer which is common for every bin, whereas the flexible component will be customizable to different requirements, like to the specific characteristics of the parts.
Close and safe interaction of humans and robots in joint production environments is technically feasible, however should not be implemented as an end in itself but to deliver improvement in any of a production system’s target dimensions. Firstly, this paper shows that an essential challenge for system integrators during the design of HRC applications is to identify a suitable distribution of available tasks between a robotic and a human resource. Secondly, it proposes an approach to determine task allocation by considering the actual capabilities of both human and robot in order to improve work quality. It matches those capabilities with given requirements of a certain task in order to identify the maximum congruence as the basis for the allocation decision. The approach is based on a study and subsequent generic description of human and robotic capabilities as well as a heuristic procedure that facilities the decision making process.
Technologies for mapping the “digital twin“ have been under development for approximately 20 years. Nowadays increasingly intelligent, individualized products encourages companies to respond innovatively to customer requirements and to handle the rising product variations quickly.
An integrated engineering network, spanning across the entire value chain, is operated to intelligently connect various company divisions, and to generate a business ecosystem for products, services and communities. The conditions for the digital twin are thereby determined in which the digital world can be fed into the real, and the real world back into the digital to deal such intelligent products with rising variations.
The term digital twin can be described as a digital copy of a real factory, machine, worker etc., that is created and can be independently expanded, automatically updated as well as being globally available in real time. Every real product and production site is permanently accompanied by a digital twin. First prototypes of such digital twins already exist in the ESB Logistics Learning Factory on a cloud- and app based software that builds on a dynamic, multidimensional data and information model. A standardized language of the robot control systems via software agents and positioning systems has to be integrated. The aspect of the continuity of the real factory in the digital factory as an economical means of ensuring continuous actuality of digital models looks as the basis of changeability.
For the indoor localization sensor combinations that in addition to the hardware already contain the software required for the sensor data fusion should be used. Processing systems, scenario-live-simulations and digital shop floor management results in a mandatory procedural combination. Essential to the digital twin is the ability to consistently provide all subsystems with the latest state of all required information, methods and algorithms.
Despite the significant potential offered by the powder coating process for finishing wood-based materials, until now it has been used almost exclusively for coating Medium Density Fiber Board (MDF). A research project aims to develop processes and substrate materials that will allow lightweight boards to be powder coated.
Obwohl Vorteile wertorientierter Preissetzung seit Jahren bekannt sind, gewinnt sie nur langsam an Boden. Die erste Studie des Preisverhaltens nach Geschäftstypen zeigt: 35 Jahre Preisforschung und -beratung konnten die Dominanz der Kostenorientierung erstmals schwächen. Der Autor wagt einen Erklärungsversuch und ermutigt zu mehr Marktorientierung.
Zusammen mit Partnern aus Industrie und Politik untersuchen die ESB Business School der Hochschule Reutlingen, die Hochschule Offenburg und die Fachhochschule Nordwestschweiz (FHNW) in einem Interreg-Projekt die Möglichkeiten, klima- und gesundheitsschädliche Emissionen im Grenzverkehr am Hochrhein zu reduzieren. Elektromobilität und Fahrgemeinschaften werden dazu im Rahmen eines Pilotprojekts gefördert und die Wirkung analysiert. Erste Ergebnisse zeigen, dass heutige Elektroautos für das grenzüberschreitende Pendeln unter bestimmten Voraussetzungen geeignet sind.
Um einen Funksensor zum Messen der Windgeschwindigkeit per Energy Harvesting mit Energie zu versorgen, bietet es sich an, das Messsignal selbst zur Energiegewinnung zu nutzen. Mit optimierter Funkübertragung und Energiemanagement lässt sich ein autarker Windstärke-Funksensor realisieren, der ab 2 m/s Windgeschwindigkeiten messen und die Messwerte per Funk übertragen kann.
Der Zusammenschluss von Unternehmen in Lieferantennetzwerken auf Basis digitaler Plattformen bietet eine Möglichkeit, der Forderung nach Flexibilität in der Industrie 4.0 nachzukommen. Anhand der Charakterisierung eines realen Lieferantennetzwerkes werden use cases für die Lieferantenanbindung hergeleitet. Diese dienen als Diskussionsgrundlage von Potenzialen und Herausforderungen der Anbindung, wobei sich die Frage nach der optimalen Integrationstiefe stellt. Hierzu wurde ein anwenderorientiertes Entscheidungsmodell abgeleitet.
Learning factories present a promising environment for education, training and research, especially in manufacturing related areas which are a main driver for wealth creation in any nation. While numerous learning factories have been built in industry and academia in the last decades, a comprehensive scientific overview of the topic is still missing. This paper intends to close this gap establishing the state of the art of learning factories. The motivations, historic background, and the didactic foundations of learning factories are outlined. Definitions of the term learning factory and the corresponding morphological model are provided. An overview of existing learning factory approaches in industry and academia is provided, showing the broad range of different applications and varying contents. The state of the art of learning factories curricula design and their use to enhance learning and research as well as potentials and limitations are presented. Conclusions and an outlook on further research priorities are offered.
The wet chemical deposition of solution processed transparent conducting oxides (TCO) provides an alternative low cost and economical deposition technique to realize large-areas of conducting films. Since the price for the most common TCO Indium Tin Oxide rises enormously, Aluminum Zinc Oxide (AZO) as alternative TCO reaches more and more interest. The optoelectronical properties of nanoparticle coatings strongly depend beneath the porosity of the coating on the shape and size of the used particles. By using bigger or rod-shaped particles it is possible to minimize the amount of grain boundaries resulting in an improvement of the electrical properties, whereas particles bigger than 100 nm should not be used if highly transparent coatings are necessary as these big particles scatter the visible light and lower the transmittance of the coatings. In this work we present a simple method to synthesize AZO particles with different shape and size, but comparable electronical properties. We use a simple, well reproducible polyol method for synthesis and influence the shape and size of the particles by adding different amounts of water to the precursor solution. We can show that the addition of aluminum as dopant strongly hinders the crystal growth but the addition of water counteracts this, so that both, spherical and rod-shaped particles can be obtained.
Das Knie ist das am häufigsten von Verletzungen betroffene Gelenk beim Skifahren. Durch die Messung bestimmter Einflussfaktoren, wie Kniewinkel und Muskelaktivität, kann eine Aussage über die Wahrscheinlichkeit einer drohenden Verletzung getroffen werden. Diese Daten können als Basis genutzt werden, um eine entsprechende Reaktion des Bindungssystems des Skis hervorzurufen. Durch die automatische Auslösung der Skibindung bei der Überschreitung der Grenzwerte wird das Knie entlastet, um möglichen Verletzungen vorzubeugen. Im Rahmen eines Forschungsprojekts der TU München wurde von einem Team der TU München und der Hochschule Reutlingen eine Skiunterhose entwickelt, mit der in Echtzeit der Kniewinkel erfasst und drahtlos an eine Auswerteeinheit gesendet werden kann.
Der flächendeckende Einsatz digitaler Zähler wird eine bislang ungekannte Menge an Kundendaten mit sich bringen. Wie können die deutschen Energieversorger hieraus ein besseres Kundenverständnis entwickeln? Die systematische Datenauslese unter Zuhilfenahme modellgestützter Zukunftsprognosen - sog. Predictive Analytics - scheint hier ein vielversprechendes Instrument zu sein. Aufbauend auf einer mit Unterstützung des Verbandes kommunaler Unternehmen durchgeführten Untersuchung lassen sich vier Handlungsempfehlungen ableiten, wie man die Digitalisierung im Vertrieb nutzen kann. Demnach sind die Festlegung von klaren Zielen und Strategien, die systematische Erschließung von Datenquellen, der Aufbau von Inhouse-Kompetenz sowie ein "Joint effort" von Marketing, Vertrieb und IT zu forcieren.
Die Bereitstellung von Wärme ist für ungefähr die Hälfte des Endenergieverbruchs in Deutschland verantwortlich und, angesichts eines Anteils erneuerbarer Energien an der Wärmebereitstellung von heute 14%, auch für einen bedeutenden Anteil der Treibhausgasemissionen. Die Bundesregierung strebt an, bis 2050 die Wärmeversorgung klimaneutral zu gestalten, sodass drei Ziele den zukünftigen Wärmemarkt und seine Innovationserfordernisse prägen: Reduktion des Wärmebedarfs, Steigerung des Anteils erneuerbarer Energien, Ausbau der Nah- und Fernwärmenetze. Für attraktive Geschäftsmodelle nicht minder wichtig sind jedoch die Kundenbedürfnisse, die sich auch aufgrund technologischer Entwicklungen stetig wandeln. Dementsprechend eröffnen sich neue Optionen für Geschäftsmodelle im Wärmesektor, z.B. erneuerbare Wärme mit Flatrate oder partizipative Wärme mit Energiesparanreizen.
Mit der Energiewende hat die Bundesregierung den Umbau der Energieversorgung begonnen. Da das Gelingen der Energiewende für die Zukunfts- und Wettbewerbsfähigkeit des Wirtschaftsstandorts Deutschland essenziell ist, wurden seitens des Bundesverbandes der deutschen Industrie (BDI) bereits 2013 Impulse für eine smarte Energiewende veröffentlicht, in denen fünf Prinzipien abgeleitet werden, die einen Rahmen für den Diskurs über die zu ergreifenden Maßnahmen setzen. Erneuerbare Energien werden in dem kommenden Jahren die dominierende Stromquelle darstellen. Daraus entstehen neue Herausforderungen. Zu deren Bewältigung hat das Bundeswirtschaftsministerium (BMWi) kürzlich eine 10-Punkte-Agenda (ZPA) für die zentralen Vorhaben der Energiewende vorgelegt. Zu diskutieren ist, inwieweit sie im Einklang mit den fünf Prinzipien des BDI steht und an welchen Stellen Anpassungen notwendig werden, damit der Umbau des Energiesystems erfolgreich gelingen kann.
In this paper a method for the generation of gSPM with ontology-based generalization was presented. The resulting gSPM was modeled with BPMN/BPMNsix in an efficient way and could be executed with BPMN workflow engines. In the next step the implementation of resource concepts, anatomical structures, and transition probabilities for workflow execution will be realized.
The fashion industry is well documented for causing significant environmental impact. Product-service systems (PSS) present a promising way to solve this challenge. PSS shift the focus toward complementary service offers, which decouples customer satisfaction from material consumption and entails dematerialization. However, PSS are not ecoefficient by nature but need to be accompanied by corporate environmental management (CEM) practices. The objective of this article is to examine the potential of PSS to contribute to the environmental sustainability of today's fashion industry by investigating if fashion firms with a positive attitude toward PSS implementation also pursue goals related to the ecological environment. For this purpose, analysis of variance (ANOVA) is conducted to analyze data of 102 fashion firms. Results reveal that the diffusion of PSS in today's fashion industry is low and few firms consider implementing PSS. Results, furthermore, demonstrate that PSS implementation is positively related to CEM. This indicates that existing structures of CEM favor PSS implementation and unlock the eco-efficient potential of implemented PSS in the fashion industry.
New digital technologies present both game-changing opportunities for—and existential threats to—companies whose success was built in the pre-digital economy. This article describes our findings from a study of 25 companies that were embarking on digital transformation journeys. We identified two digital strategies—customer engagement and digitized solutions—that provide direction for a digital transformation. Two technology-enabled assets are essential for executing those strategies: an operational backbone and a digital services platform. We describe how a big old company can combine these elements to navigate its digital transformation.
This paper presents an approach for label-free brain tumor tissue typing. For this application, our dual modality microspectroscopy system combines inelastic Raman scattering spectroscopy and Mie elastic light scattering spectroscopy. The system enables marker-free biomedical diagnostics and records both the chemical and morphologic changes of tissues on a cellular and subcellular level. The system setup is described and the suitability for measuring morphologic features is investigated.
The best fully automated analysis process achieves even better classification results than the established manual process. The best algorithms for the three analysis steps are (i) SGLTR (Savitzky-Golay Laplace operator filter thresholding regions) and LM (Local Maxima) for automated peak identification, (ii) EM clustering (Expectation Maximization) and DBSCAN (Density-Based Spatial Clustering of Applications with Noise) for the clustering step and (iii) RF (Random Forest) for multivariate classification. Thus, automated methods can replace the manual steps in the analysis process to enable an unbiased high throughput use of the technology.
Propofol in exhaled breath can be measured and may provide a real-time estimate of plasma concentration. However, propofol is absorbed in plastic tubing, thus estimates may fail to reflect lung/blood concentration if expired gas is not extracted directly from the endotracheal tube.We evaluated exhaled propofol in five ventilated ICU patients who were sedated with propofol. Exhaled propofol was measured once per minute using ion mobility spectrometry. Exhaled air was sampled directly from the endotracheal tube and at the ventilator end of the expiratory side of the anesthetic circuit. The circuit was disconnected from the patient and propofol was washed out with a separate clean ventilator. Propofol molecules, which discharged from the expiratory portion of the breathing circuit, were measured for up to 60 h.We also determined whether propofol passes through the plastic of breathing circuits. A total of 984 data pairs (presented as median values, with 95% confidence interval), consisting of both concentrations were collected. The concentration of propofol sampled near the patient was always substantially higher, at 10.4 [10.25–10.55] versus 5.73 [5.66–5.88] ppb (p<0.001). The reduction in concentration over the breathing circuit tubing was 4.58 [4.48–4.68] ppb, 3.46 [3.21–3.73] in the first hour, 4.05 [3.77–4.34] in the second hour, and 4.01 [3.36–4.40] in the third hour. Out-gassing propofol from the breathing circuit remained at 2.8 ppb after 60 h of washing out. Diffusion through the plastic was not observed. Volatile propofol binds or adsorbs to the plastic of a breathing circuit with saturation kinetics. The bond is reversible so propofol can be washed out from the plastic. Our data confirm earlier findings that accurate measurements of volatile propofol require exhaled air to be sampled as close as possible to the patient.
Umsatz und Gewinne stagnieren auf hohem Niveau, und dennoch steigen der Aktienkurs und der Gewinn pro Aktie – eine Entwicklung, die sich etwa bei Apple oder Ebay beobachten lässt. Aktionäre sollten wissen, welche Arithmetik sich hinter solchen Entwicklungen verbirgt und mit welchen Verfahren sie den Unternehmenswert am besten ermitteln können.
Wer in ein Unternehmen investiert, tut dies, um in Zukunft Geld zu verdienen. Er rechnet mit einer risikoadäquaten Rendite. Die Auswahl der Kennzahlen, die diese Wertsteigerung transparent machen, ist allerdings nicht trivial. Denn von ihnen hängt ab, ob die Unternehmensziele richtig vorgegeben und ob die Anreize für das Management richtig gesetzt werden.
Risiken sind per se nichts Schlechtes, wenn der dadurch erzielte Ertrag für das eingegangene Risiko angemessen ist. Dieser Zusammenhang wird allerdings nicht immer verstanden – einer der Gründe für die Finanzkrise von 2008/09. Die in diesem Beitrag vorgestellten Kennzahlen zeigen, wie man Risiken mit erzielten oder möglichen Erträgen ins Verhältnis setzen kann.
Eine realistische Risikoeinschätzung ist Basis von verantwortungsvollen Unternehmensentscheidungen. Doch wie lassen sich Risiken richtig einschätzen? Verschiedene Instrumente des Risiko-Managements erlauben es, Risiken systematisch zu identifizieren, zu quantifizieren, zu bewerten und zu dokumentieren.
EBIT & Co.
(2017)
Eine ganze Reihe von Kennzahlen wird in der Betriebswirtschaftslehre zur Ermittlung und Steuerung des Unternehmensgewinns verwendet. Doch nicht alle eignen sich für denselben Zweck. Je nach Fragestellung sollten unterschiedliche Kennzahlen herangezogen werden. Ihre Interpretation muss nicht zuletzt auch branchenspezifisch erfolgen.
Wege der Gewinnermittlung
(2017)
Macht ein Unternehmen Gewinn, heißt dies nicht notwendigerweise, dass alles „in trockenen Tüchern“ ist. Die entscheidende Frage ist, wie der Gewinn ermittelt wurde, denn nur mit dem richtigen Verfahren erhält man auch den geeigneten Blickwinkel – auf den Erfolg eines einzelnen Geschäfts, auf den Gewinn einer Periode, auf das Betriebsvermögen, auf die Liquidität oder auf die Bilanz.
Durch die Digitalisierung und Vernetzung der Industrieproduktion werden sich Arbeitsinhalte und Arbeitsprozesse in den nächsten zehn Jahren stark verändern. Allerdings ist bislang unklar, wie sie sich verändern, welche neuen Anforderungen sich daraus für die Beschäftigten ergeben und mit welchen Kompetenzen die MitarbeiterInnen für die neue Arbeitswelt gerüstet sind. In diesem Beitrag zeigen wir anhand einer qualitativen Fallstudie bei einem Automobilhersteller, dass die durch Industrie 4.0 hervorgerufenen Veränderungen zu mehr Vielfalt und Komplexität bei den Prozessen und Aufgaben der MitarbeiterInnen führen sowie höhere Flexibilität verlangen. Zudem nehmen die Kommunikationsanforderungen zu und auch die technologische Unterstützung gewinnt an Bedeutung. Um diese Herausforderungen zu bewältigen, benötigen MitarbeiterInnen vor allem ein breiteres Spektrum an Fach- und Methodenkompetenzen sowie sozial-kommunikative Kompetenzen.
The fluorescence of monomeric photosystem II core complexes (mPSIIcc) of the cyanobacterium Thermosynechococcus elongatus, originating from redissolved crystals, is investigated by using single-molecule spectroscopy (SMS) at 1.6 K. The emission spectra of individual mPSIIcc are dominated by sharp zero-phonon lines, showing the existence of different emitters compatible with the F685, F689, and F695 bands reported formerly. The intensity of F695 is reduced in single mPSIIcc as compared to single PSIIcc-dimers (dPSIIcc). Crystal structures show that one of the β-carotene (β-Car) cofactors located at the monomer–monomer interface in dPSIIcc is missing in mPSIIcc. This β-Car in dPSIIcc is in van der Waals distance to chlorophyll (Chl) 17 in the CP47 subunit. We suggest that this Chl contributes to the F695 emitter. A loss of β-Car cofactors in mPSIIcc preparations will lead to an increased lifetime of the triplet state of Chl 17, which can explain the reduced singlet emission of F695 as observed in SMS.
Purpose: Medical processes can be modeled using different methods and notations.Currently used modeling systems like Business Process Model and Notation (BPMN) are not capable of describing the highly flexible and variable medical processes in sufficient detail.
Methods: We combined two modeling systems, Business Process Management (BPM) and Adaptive Case Management (ACM), to be able to model non-deterministic medical processes. We used the new Standards Case Management Model and Notation (CMMN) and Decision Management Notation (DMN).
Results: First, we explain how CMMN, DMN and BPMN could be used to model non-deterministic medical processes. We applied this methodology to model 79 cataract operations provided by University Hospital Leipzig, Germany, and four cataract operations provided by University Eye Hospital Tuebingen, Germany. Our model consists of 85 tasks and about 20 decisions in BPMN. We were able to expand the system with more complex situations that might appear during an intervention.
Conclusion: An effective modeling of the cataract intervention is possible using the combination of BPM and ACM. The combination gives the possibility to depict complex processes with complex decisions. This combination allows a significant advantage for modeling perioperative processes.
Best Practice-Modelle und Change- Weisheiten erfreuen sich großer Beliebtheit, was sich wohl damit erklären lässt, dass sie bei den Verantwortlichen komplexitätsreduzierend wirken und Unsicherheit abbauen. Allerdings sind Organisationen voller Widersprüche, reagieren oft irrational und folgen nicht unbedingt den durchgeplanten Entwürfen des Change Managements. Manche Fragen in Organisationen sind unlösbar, und die Organisationen pendeln bei ihrer Lösungssuche zwischen entgegengesetzten Polen hin und her. Best Practices können als Idealvorstellungen die in sie gesetzten Erwartungen oft nicht erfüllen. Dort, wo sie an ihre Grenzen stoßen, erscheint es ratsam, sich auf die fundamentalen Kräfte des Wandels wie Paradoxien, Ambiguität, Komplexität und Nicht-Steuerbarkeit einzulassen.
Für Führungskräfte sind Widersprüche und paradoxe Spannungen eine alltägliche Erfahrung. Dennoch sehen viele Führungskräfte Widersprüche als etwas an, das »eigentlich« nicht da sein sollte. Häufig blenden sie die widersprüchlichen Signale aus und ignorieren die Paradoxie. Oder sie nehmen die Spannungen als störend und belastend wahr und versuchen die Paradoxie zu lösen. Die Management- und Organisationsforschung zeigt jedoch: Paradoxien sind in Organisationen omnipräsent. Und sie sind nicht dauerhaft lösbar. Welche Konsequenzen hat das für unser Verständnis von Management?
Die meisten Unternehmen steuern ihr operatives Marketing, ohne die Effektivität und die Effizienz der dabei eingesetzten Instrumente zu quantifizieren - in Anbetracht der Höhe typischer Marketingbudgets ein kritischer Befund. Wie kann man hier Abhilfe schaffen? Ein Blick auf eines der Schlüsselkonzepte von Industrie 4.0 zeigt einen möglichen Weg auf.
Trotz größer werdendem Tenor, die Intuition als gewinnbringende Ergänzung zur rational geprägten Entscheidungskultur im Vertrieb zu implementieren, scheint dennoch Unsicherheit und Unwissenheit über den richtigen Umgang mit der Intuition seitens der Mitarbeiter und Mitarbeiterinnen vorzuherrschen. Durch die systematische Legitimierung der Intuition Vertrieb kann diesem Umstand entgegengewirkt werden.
Bei großen Sportereignissen wie Fußball-, Welt- und Europameisterschaften oder Olympischen Spielen geht es für Verbände und offizielle Sponsoren um Millionen, entsprechend scharf verteidigen sie ihre Werberechte. Burger King zeigt, wie sich dieses „Monopol“ kreativ umgehen lässt. Im folgenden Beitrag werden exemplarisch zwei Ambush-Marketing-Aktivitäten von Burger King im Rahmen der Fußball Europameisterschaften 2016 vorgestellt. Nicht-Sponsor Burger King setzte Ambush Marketing dabei gezielt und kreativ im Rahmen der EM ein, um gegen den offiziellen UEFA-Sponsor und Wettbewerber McDonald‘s Punkte zu sammeln.
Der B-to-B-Vertrieb hat sich durch neueste Informationstechnologien stark verändert und ist wesentlich komplexer geworden. Gleichwohl haben sich die Möglichkeiten dadurch auch dramatisch verbessert. International agierende, virtuell zusammenarbeitende Teams haben die Entscheidungsprozesse und Kompetenzen verschoben. Mit Social Selling bietet sich jetzt eine Möglichkeit, die neu entstandenen Herausforderungen im Vertrieb besser zu meistern.
Angesichts des breiten Angebotsspektrums neuer Technologien und der Vielzahl verschieden verwendeter Begriffe rund um Industrie 4.0, stehen Unternehmen nicht selten orientierungslos vor der Herausforderung, individuelle Umsetzungsstrategien abzuleiten. Das vorliegende Reifegradmodell ermöglicht die Erfassung bereits im Produktionssystem implementierter Lean Management-Prinzipien und gibt praktikable Antworten auf die evolutionären Visionen, indem es realisierbare und individuelle Migrationspfade in Richtung Industrie 4.0 für Unternehmen aufzeigt.
The modern industrial corporation encompasses a myriad of different software applications, each of which must work in concert to deliver functionality to end-users. However, the increasingly complex and dynamic nature of competition in today’s product-markets dictates that this software portfolio be continually evolved and adapted, in order to meet new business challenges. This ability – to rapidly update, improve, remove, replace, and reimagine the software applications that underpin a firm’s competitive position – is at the heart of what has been called IT agility. Unfortunately, little work has examined the antecedents of IT agility, with respect to the choices a firm makes when designing its “Software Portfolio Architecture.”
We address this gap in the literature by exploring the relationship between software portfolio architecture and IT agility at the level of the individual applications in the architecture. In particular, we draw from modular systems theory to develop a series of hypotheses about how different types of coupling impact the ability to update, remove or replace the software applications in a firm’s portfolio. We test our hypotheses using longitudinal data from a large financial services firm, comprising over 1,000 applications and over 3,000 dependencies between them. Our methods allow us to disentangle the effects of different types and levels of coupling.
Our analysis reveals that applications with higher levels of coupling cost more to update, are harder to remove, and are harder to replace, than those with lower coupling. The measures of coupling that best explain differences in IT agility include all indirect dependencies between software applications (i.e., they include coupling and dependency relationships that are not easily visible to the system architect). Our results reveal the critical importance of software portfolio design decisions, in developing a portfolio of applications that can evolve and adapt over time.
Propofol is a commonly used intravenous general anesthetic. Multi-capillary column (MCC) coupled ion-mobility spectrometry (IMS) can be used to quantify exhaled propofol, and thus estimate plasma drug concentration. Here, we present results of the calibration and analytical validation of a MCC/IMS pre-market prototype for propofol quantification in exhaled air.
Energy transfer kinetics in photosynthesis as an inspiration for improving organic solar cells
(2017)
Clues to designing highly efficient organic solar cells may lie in understanding the architecture of light harvesting systems and exciton energy transfer (EET) processes in very efficient photosynthetic organisms. Here, we compare the kinetics of excitation energy tunnelling from the intact phycobilisome (PBS) light harvesting antenna system to the reaction center in photosystem II in intact cells of the cyanobacterium Acaryochloris marina with the charge transfer after conversion of photons into photocurrent in vertically aligned carbon nanotube (va- CNT) organic solar cells with poly(3-hexyl)thiophene (P3HT) as the pigment. We find that the kinetics in electron hole creation following excitation at 600 nm in both PBS and va-CNT solar cells to be 450 and 500 fs, respectively. The EET process has a 3 and 14 ps pathway in the PBS, while in va-CNT solar cell devices, the charge trapping in the CNT takes 11 and 258 ps. We show that the main hindrance to efficiency of va CNT organic solar cells is the slow migration of the charges after exciton formation.
Das Internet ist längst ein fester Bestandteil in den Marketing- und Vertriebsstrategien. Doch auch mit dem Einsatz von Onlinewerbung, Suchmaschinenoptimierung und der Nutzung von Social Media ist es Unternehmen oft nicht möglich, die erhoffte Aufmerksamkeit zu erhalten und die gewünschte Wirkung von Botschaften auf die Kunden zu erzielen. Mithilfe einer strukturierten Zusammenarbeit mit sogenannten Social Influencern ist es auch im B2B-Bereich möglich, ein authentisches und glaubhaftes Image aufzubauen.
In the lights of an increasing digitalization of companies, the sales process might experience changes in the usage and the influence of digital tools. In order to examine the status quo of German companies in this regard, a study was conducted between 235 participants. The results of this study will be outlined in the article at hand.
We present a topology of MIMO arrays of inductive antennas exhibiting inherent high crosstalk cancellation capabilities. A single layer PCB is etched into a 3-channels array of emitting/receiving antennas. Once coupled with another similar 3-channels emitter/receiver, we measured an Adjacent Channel Rejection Ratio (ACRR) as high as 70 dB from 150 Hz to 150 kHz. Another primitive device made out of copper wires wound around PVC tubes to form a 2-channels “non-contact slip-ring” exhibited 22 dB to 47 dB of ACRR up to 15MHz. In this paper we introduce the underlying theoretical model behind the crosstalk suppression capabilities of those so-called “Pie-Chart antennas”: an extension of the mutual inductance compensation method to higher number of channels using symmetries. We detail the simple iterative building process of those antennas, illustrate it with numerical analysis and evaluate there effectiveness via real experiments on the 3-channels PCB array and the 2-channels rotary array up to the limit of our test setup. The Pie Chart design is primarily intended as an alternative solution to costly electronic filters or cumbersome EM shields in wireless AND wired applications, but not exclusively.
Integrated power semiconductors are often used for applications with cyclic on-chip power dissipation. This leads to repetitive self-heating and thermo-mechanical stress, causing fatigue on the on-chip metallization and possibly destruction by short circuits. Because of this, an accurate simulation of the thermo-mechanical stress is needed already during the design phase to ensure that lifetime requirements are met. However, a detailed thermo mechanical simulation of the device, including the on-chip metallization is prohibitively time-consuming due to its complex structure, typically consisting of many thin metal lines with thousands of vias. This paper introduces a two-step approach as a solution for this problem. First, a simplified but fast simulation is performed to identify the device parts with the highest stress. After, precise simulations are carried out only for them. The applicability of this method is verified experimentally for LDMOS transistors with different metal configurations. The measured lifetimes and failure locations correlate well with the simulations. Moreover, a strong influence of the layout of the on-chip metallization lifetime was observed. This could also be explained with the simulation
method.
The conventional view of the value-creation chain suggests offering high-value propositions at the product level (in terms of benefits provided by elements of the product) to attain high-value perceptions at the customer level, which should ultimately result in high-value appropriation at the firm level (i.e. relationship, volume, pricing and financial success). This study challenges this view and provides a differentiated understanding of the value creation chain. With a multi-industry sample of 339 companies and a sample of 626 customers to validate managerial assessments, the authors apply a configurational approach to identify whether and to what extent offering high-value propositions at the product level is necessary or sufficient for achieving superior value perceptions at the customer level and high-value appropriation at the firm level. Taking into account the company-internal and company-external environment of the value-creation chain, the study identifies seven value creation chain constellations.
Digitisation forms a part of Industrie 4.0 and is both threatening, but also providing an opportunity to transform business as we know it; and can make entire business models redundant. Although companies might realise the need to digitise, many are unsure of how to start this digital transformation. This paper addresses the problems and challenges faced in digitisation, and develops a model for initialising digital transformation in enterprises. The model is based on a continuous improvement cycle, and also includes triggers for innovative and digital thinking within the enterprise. The model was successfully validated in the German service sector.
Newly developed active pharmaceutical ingredients (APIs) are often poorly soluble in water. As a result the bioavailability of the API in the human body is reduced. One approach to overcome this restriction is the formulation of amorphous solid dispersions (ASDs), e.g., by hot-melt extrusion (HME). Thus, the poorly soluble crystalline form of the API is transferred into a more soluble amorphous form. To reach this aim in HME, the APIs are embedded in a polymer matrix. The resulting amorphous solid dispersions may contain small amounts of residual crystallinity and have the tendency to recrystallize. For the controlled release of the API in the final drug product the amount of crystallinity has to be known. This review assesses the available analytical methods that have been recently used for the characterization of ASDs
and the quantification of crystalline API content. Well established techniques like near- and mid-infrared spectroscopy (NIR and MIR, respectively), Raman spectroscopy, and emerging ones like UV/VIS, terahertz, and ultrasonic spectroscopy are considered in detail. Furthermore, their advantages and limitations are discussed with regard to general practical applicability as process analytical technology (PAT) tools in industrial manufacturing. The review focuses on spectroscopic methods which have been proven as most suitable for in-line and on-line process analytics. Further aspects are spectroscopic techniques that have been or could be integrated into an extruder.
In vitro cultured cells produce a complex extracellular matrix (ECM) that remains intact after decellularization. The biological complexity derived from the variety of distinct ECM molecules makes these matrices ideal candidates for biomaterials. Biomaterials with the ability to guide cell function are a topic of high interest in biomaterial development. However, these matrices lack specific addressable functional groups, which are often required for their use as a biomaterial. Due to the biological complexity of the cell-derived ECM, it is a challenge to incorporate such functional groups without affecting the integrity of the biomolecules within the ECM. The azide-alkyne cycloaddition (click reaction, Huisgen-reaction) is an efficient and specific ligation reaction that is known to be biocompatible when strained alkynes are used to avoid the use of copper (I) as a catalyst. In our work, the ubiquitous modification of a fibroblast cell-derived ECM with azides was achieved through metabolic oligosaccharide engineering by adding the azide-modified monosaccharide Ac4GalNAz (1,3,4,6 tetra-O-acetyl-N-azidoacetylgalactosamine) to the cell culture medium. The resulting azide-modified network remained intact after removing the cells by lysis and the molecular structure of the ECM proteins was unimpaired after a gentle homogenization process. The biological composition was characterized in order to show that the functionalization does not impair the complexity and integrity of the ECM. The azides within this ‘‘clickECM” could be accessed by small molecules (such as an alkyne modified fluorophore) or by surface-bound cyclooctynes to achieve a covalent coating with clickECM.
Indium tin oxide (ITO) particle coatings are known for high transparency in the visible, good conductive properties and near-infrared absorption. These properties depend on ITO particle's stiochiometric composition, defects and size. Here we present a method to gradually change ITO particle's optical properties by a simple and controlled laser irradiation process. The defined irradiation process and controlled energy dose input allows one to engineer the absorption and transsmission of coatings made from these particles. We investigate the role of the surrounding solvent, influence of laser fluence and the specific energy dose targeting modification of the ITO particle's morphology and chemistry by stepwise laser irradiation in a free liquid jet. TEM, SEM, EDX, XPS, XRD and Raman are used to elucidate the structural, morphological and chemical changes of the laser-induced ITO particles. On the basis of these results the observed modification of the optical properties is tentatively attributed to chemical changes, e.g. laser-induced defects or partial reduction.
THE PROBLEM: Companies create problems for customers and employees when product innovation goes unmanaged. Eventually, excessive operational complexity hurts the bottom line.
THREE SOLUTIONS: Focus on product integration, not product proliferation. Make sure your product developers work closely with customerfacing and operational employees. And settle on a high-level purpose that can guide decision making.
Durch den Anstieg volatiler Stromerzeugung aus Wind und Sonne benötigt die deutsche Energiewirtschaft in zunehmendem Ausmaß flexibel verfügbare Leistung und Arbeit. Diese Flexibiliät können bspw. Batteriespeicher bereitstellen. In welchem Ausmaß jene diese Rolle übernehmen können und somit der Markt wachsen wird, hängt von der Professionalität der Marktakteure und den Umfeldparametern ab. Wenn diese stimmen, steigen Akteure in die Entwicklung von Geschäftsmodellen ein. Gleichzeitig streben sie an, die Weiterentwicklung dieser Umfeldparameter im eigenen Interesse zu beeinflussen, womit ein weiteres Marktpotenzial entsteht.Im Folgenden werden erkennbare Geschäftsmodelle aufgezeigt und in den Kontext der Ergebnisse aktueller Potenzialanalysen gestellt. Dabei entwickeln sich die zwei Teilmärkte für Batteriespeicher - Heimspeicher und Großspeicher - unter unterschiedlichen Rahmenbedingungen.
We report the temperature dependence of metal-enhanced fluorescence (MEF) of individual photosystem I (PSI) complexes from Thermosynechococcus elongatus (T. elongatus) coupled to gold nanoparticles (AuNPs). A strong temperature dependence of shape and intensity of the emission spectra is observed when PSI is coupled to AuNPs. For each temperature, the enhancement factor (EF) is calculated by comparing the intensity of individual AuNP-coupled PSI to the mean intensity of ‘uncoupled’ PSI. At cryogenic temperature (1.6 K) the average EF was 4.3-fold. Upon increasing the temperature to 250 K the EF increases to 84-fold. Single complexes show even higher EFs up to 441.0-fold. At increasing temperatures the different spectral pools of PSI from T. elongatus become distinguishable. These pools are affected differently by the plasmonic interactions and show different enhancements. The remarkable increase of the EFs is explained by a rate model including the temperature dependence of the fluorescence yield of PSI and the spectral overlap between absorption and emission spectra of AuNPs and PSI, respectively.
It is assumed that more education leads to better understanding of complex systems. Some researchers, however, find indications that simple mechanisms like stocks and flows are not well understood even by people who have passed higher education. In this paper, we test people’s understanding of complex systems with the widely studied stock-and-flow (SF) tasks. SF tasks assess people’s understanding of the interplay between stocks and flows. We investigate SF failure of domain experts and novices in different knowledge domains. In particular, we compare performance on the original study’s bathtub task with the square wave pattern with two alternative cover stories from the engineering and business domains on different groups of business and engineering students from different semesters. Further, we show that, while engineering students perform better than business students, with progressing in higher education, students may lose the capability of dealing with simple SF tasks. We thus find hints on déformation professionelle in higher education.
Propofol is an intravenous anesthetic. Currently, it is not possible to routinely measure blood concentration of the drug in real time. However, multi-capillary column ion-mobility spectrometry of exhaled gas can estimate blood propofol concentration.Unfortunately, adhesion of volatile propofol on plastic materials complicates measurements. Therefore, it is necessary to consider the extent to which volatile propofol adheres to various plastics used in sampling tubing. Perfluoralkoxy (PFA), polytetrafluorethylene (PTFE), polyurethane (PUR), silicone, and Tygon tubing were investigated in an experimental setting using a calibration gas generator (HovaCAL). Propofol gas was measured for one hour at 26 °C, 50 °C, and 90 °C tubing temperature. Test tubing segments were then flushed with N2 to quantify desorption. PUR and Tygon sample tubing absorbed all volatile propofol. The silicone tubing reached the maximum propofol concentration after 119 min which was 29 min after propofol gas exposure stopped. The use of PFAor PTFE tubing produced comparable and reasonably accurate propofol measurements. The desaturation time for the PFA was 10 min shorter at 26 °C than for PTFE. PFA tubing thus seems most suitable for measurement of volatile propofol,with PTFE as an alternative.
This paper investigates the electrothermal stability and the predominant defect mechanism of a Schottky gate AlGaN/GaN HEMT. Calibrated 3-D electrothermal simulations are performed using a simple semiempirical dc model, which is verified against high-temperature measurements up to 440°C. To determine the thermal limits of the safe operating area, measurements up to destruction are conducted at different operating points. The predominant failure mechanism is identified to be hot-spot formation and subsequent thermal runaway, induced by large drain–gate leakage currents that occur at high temperatures. The simulation results and the high temperature measurements confirm the observed failure patterns.
Purpose: Human breath analysis is proposed with increasing frequency as a useful tool in clinical application. We performed this study to find the characteristic volatile organic compounds (VOCs) in the exhaled breath of patients with idiopathic pulmonary fibrosis (IPF) for discrimination from healthy subjects. Methods: VOCs in the exhaled breath of 40 IPF patients and 55 healthy controls were measured using a multi-capillary column and ion mobility spectrometer. The patients were examined by pulmonary function tests, blood gas analysis, and serum biomarkers of interstitial pneumonia. Results: We detected 85 VOC peaks in the exhaled breath of IPF patients and controls. IPF patients showed 5 significant VOC peaks; p-cymene, acetoin, isoprene, ethylbenzene, and an unknown compound. The VOC peak of p-cymene was significantly lower (p < 0.001), while the VOC peaks of acetoin, isoprene, ethylbenzene, and the unknown compound were significantly higher (p < 0.001 for all) compared with the peaks of controls. Comparing VOC peaks with clinical parameters, negative correlations with VC (r =−0.393, p = 0.013), %VC (r =−0.569, p < 0.001), FVC (r = −0.440, p = 0.004), %FVC (r =−0.539, p < 0.001), DLco (r =−0.394, p = 0.018), and %DLco (r =−0.413, p = 0.008) and a positive correlation with KL-6 (r = 0.432, p = 0.005) were found for p-cymene. Conclusion: We found characteristic 5 VOCs in the exhaled breath of IPF patients. Among them, the VOC peaks of p-cymene were related to the clinical parameters of IPF. These VOCs may be useful biomarkers of IPF.
Social sustainable supply chain management in the textile and apparel industry : a literature review
(2017)
So far, a vast amount of studies on sustainability in supply chain management have been conducted by academics over the last decade. Nevertheless, socially related aspects are still neglected in the related discussion. The primary motivation of the present literature review has arisen from this shortcoming, thus the key purpose of this study is to enrich the discussion by providing a state of-the-art, focusing exclusively on social issues in sustainable supply chain management (SSCM) by considering the textile/apparel sector as the field of application. The authors conduct a literature review, including content analysis which covers 45 articles published in English peer-reviewed journals, and proposes a comprehensive map which integrates the latest findings on socially related practices in the textile/apparel industry with the dominant conceptualization in order to reveal potential research areas in the field. The results show an ongoing lack of investigation regarding the social dimension of the triple bottom line in SSCM. Findings indicate that a company’s internal orientation is the main assisting factor in sustainable supply chain management practices. Further, supplier collaboration and assessment can be interpreted as an offer for suppliers deriving from stakeholders and a focal company’s management of social risk. Nevertheless, suppliers do also face or even create huge barriers in improving their social performance. This calls for more empirical research and qualitative or quantitative survey methods, especially at the supplier level located in developing countries.
Nenne sie niemals Senioren!
(2017)
In this study, a novel strategy has been developed for the assembly of polyelectrolyte multilayer (PEM) on CaCO3 templates in acidic pH solutions, where consecutive polyelectrolyte layers (heparin/poly(allylamine hydrochloride) or heparin/chitosan) were deposited on PEM hollow microcapsules established previously on CaCO3 templates. The PEM build-up, hollow capsule characterization and successful encapsulation of fluorescein 5(6)-isothiocyanate (FITC)-Dextran by coprecipitation with CaCO3 are demonstrated. Improvement by the removal of CaCO3 core was achieved while the depositions. In the course of the release profile, high retardation for encapsulated FITC-Dextran was observed. The combined shell capsules system is a significant trait that has potential use in tailoring functional layer-by-layer capsules as intelligent drug delivery vehicles where the preliminary in vitro tests showed the responsiveness on the enzymes.
We present a fully automatic approach to real-time 3D face reconstruction from monocular in-the-wild videos. With the use of a cascaded-regressor-based face tracking and a 3D morphable face model shape fitting, we obtain a semidense 3D face shape. We further use the texture information from multiple frames to build a holistic 3D face representation from the video footage. Our system is able to capture facial expressions and does not require any person specific training. We demonstrate the robustness of our approach on the challenging 300 Videos in the Wild (300- VW) dataset. Our real-time fitting framework is available as an open-source library at http://4dface.org.