Informatik
Refine
Document Type
- Conference proceeding (83) (remove)
Language
- English (83)
Is part of the Bibliography
- yes (83)
Institute
- Informatik (83)
Publisher
- IEEE (83) (remove)
Multi-versioning and MVCC are the foundations of many modern DBMSs. Under mixed workloads and large datasets, the creation of the transactional snapshot can become very expensive, as long-running analytical transactions may request old versions, residing on cold storage, for reasons of transactional consistency. Furthermore, analytical queries operate on cold data, stored on slow persistent storage. Due to the poor data locality, snapshot creation may cause massive data transfers and thus lower performance. Given the current trend towards computational storage and near-data processing, it has become viable to perform such operations in-storage to reduce data transfers and improve scalability. neoDBMS is a DBMS designed for near-data processing and computational storage. In this paper, we demonstrate how neoDBMS performs snapshot computation in-situ. We showcase different interactive scenarios, where neoDBMS outperforms PostgreSQL 12 by up to 5×.
For a long time, most discrete accelerators have been attached to host systems using various generations of the PCI Express interface. However, with its lack of support for coherency between accelerator and host caches, fine-grained interactions require frequent cache-flushes, or even the use of inefficient uncached memory regions. The Cache Coherent Interconnect for Accelerators (CCIX) was the first multi-vendor standard for enabling cache-coherent host-accelerator attachments, and already is indicative of the capabilities of upcoming standards such as Compute Express Link (CXL). In our work, we compare and contrast the use of CCIX with PCIe when interfacing an ARM-based host with two generations of CCIX-enabled FPGAs. We provide both low-level throughput and latency measurements for accesses and address translation, as well as examine an application-level use-case of using CCIX for fine-grained synchronization in an FPGA-accelerated database system. We can show that especially smaller reads from the FPGA to the host can benefit from CCIX by having roughly 33% shorter latency than PCIe. Small writes to the host have a latency roughly 32% higher than PCIe, though, since they carry a higher coherency overhead. For the database use-case, the use of CCIX allowed to maintain a constant synchronization latency even with heavy host-FPGA parallelism.
We present a multitask network that supports various deep neural network based pedestrian detection functions. Besides 2D and 3D human pose, it also supports body and head orientation estimation based on full body bounding box input. This eliminates the need for explicit face recognition. We show that the performance of 3D human pose estimation and orientation estimation is comparable to the state-of-the-art. Since very few data sets exist for 3D human pose and in particular body and head orientation estimation based on full body data, we further show the benefit of particular simulation data to train the network. The network architecture is relatively simple, yet powerful, and easily adaptable for further research and applications.
Context: The manufacturing industry is facing a transformation with regard to Industry 4.0 (I4). A transformation towards full automation of production including a multitude of innovations is necessary. Startups and entrepreneurial processes can support such a transformation as has been shown in other industries. However, I4 has some specifics, so it is unclear how entrepreneurship can be adapted in I4. Understanding these specifics is important to develop suitable training programs for I4 startups and to accelerate the transformation.
Objective: This study identifies and outlines the essential characteristics and constraints of entrepreneurial processes in I4.
Method: 14 semi-structured interviews were conducted with experts in the field of I4 entrepreneurship. The interviews were analysed and categorized by qualitative analyses.
Results: The interviews revealed several characteristics of I4 that have a significant impact on the various phases of the entrepreneurial process. Examples of such specifics include the difficult access to customers, the necessary deep understanding of the customer and the domain, the difficulty of testing risky assumptions, and the complex development and productization of solutions. The complexity of hardware and software components, cost structures, and necessary customer-specific customizations affect the scalability of I4 startups. These essential characteristics also require specialised skills and resources from I4 startups.
Context: The software-intensive business is characterized by increasing market dynamics, rapid technological changes, and fast-changing customer behaviors. Organizations face the challenge of moving away from traditional roadmap formats to an outcome-oriented approach that focuses on delivering value to the customer and the business. An important starting point and a prerequisite for creating such outcome-oriented roadmaps is the development of a product vision to which internal and external stakeholders can be aligned. However, the process of creating a product vision is little researched and understood.
Objective: The goal of this paper is to identify lessons-learned from product vision workshops, which were conducted to develop outcome-oriented product roadmaps.
Method: We conducted a multiple-case study consisting of two different product vision workshops in two different corporate contexts.
Results: Our results show that conducting product vision workshops helps to create a common understanding among all stakeholders about the future direction of the products. In addition, we identified key organizational aspects that contribute to the success of product vision workshops, including the participation of employees from functionally different departments.
Product roadmaps in the new mobility domain: state of the practice and industrial experiences
(2021)
Context: The New Mobility industry is a young market that includes high market dynamics and is therefore associated with a high degree of uncertainty. Traditional product roadmapping approaches such a detailed planning of features over a long-time horizon typically fail in such environments. For this reason, companies that are active in the field of New Mobility are faced with the challenge of keeping their product roadmaps reliable for stakeholders while at the same time being able to react flexibly to changing market requirements.
Objective: The goal of this paper is to identify the state of practice regarding product roadmapping of New Mobility companies. In addition, the related challenges within the product roadmapping process as well as the success factors to overcome these challenges will be highlighted.
Method: We conducted semi-structured expert interviews with 8 experts (7 German company and one Finnish company) from the field of New Mobility and performed a content analysis.
Results: Overall the results of the study showed that the participating companies are aware of the requirements that the New Mobility sector entails. Therefore, they exhibit a high level of maturity in terms of product roadmapping. Nevertheless, some aspects were revealed that pose specific challenges for the participating companies. One major challenge, for example, is that New Mobility in terms of public clients is often a tender business with non-negotiable product requirements. Thus, the product roadmap can be significantly influenced from the outside. As factors for a successful product roadmapping mainly soft factors such as trust between all people involved in the product development process and transparency throughout the entire roadmapping process were mentioned.
How to prioritize your product roadmap when everything feels important: a grey literature review
(2021)
Context: A key factor in achieving product success is to identify what and in which order outputs must be launched in order to deliver the most value to the customer and the business. Therefore, a well-established process to discover and prioritize the content of the product roadmap in the right way is crucial for the success of a company. However, most companies prioritize their product roadmap items based on opinions of experts or the management. Additionally, increasing market dynamics, rapidly evolving technologies and fast changing customer behavior complicate the conduction of the prioritization process. Therefore, many companies are struggling to finding and establishing suitable techniques for prioritizing their product roadmap.
Objective: In order to gain a better understanding of the prioritization process in a dynamic and uncertain market environment, this paper aims to identify suitable techniques for the prioritization in such environments.
Method: We conducted a Grey Literature Review according to the guidelines of Garousi et al.
Results: 18 techniques for the prioritization of the product roadmap could be identified. 15 techniques are primarily used to prioritize outputs by considering factors such as the expected impact or effort. Two technique are most suitable for prioritizing risky assumptions that need to be validated and one technique focuses on the prioritization of outcomes. All techniques have in common that they should be conducted as cross-functional team activity in order to include different perspectives in the prioritization process.
Near-Data Processing is a promising approach to overcome the limitations of slow I/O interfaces in the quest to analyze the ever-growing amount of data stored in database systems. Next to CPUs, FPGAs will play an important role for the realization of functional units operating close to data stored in non-volatile memories such as Flash.It is essential that the NDP-device understands formats and layouts of the persistent data, to perform operations in-situ. To this end, carefully optimized format parsers and layout accessors are needed. However, designing such FPGA-based Near-Data Processing accelerators requires significant effort and expertise. To make FPGA-based Near-Data Processing accessible to non-FPGA experts, we will present a framework for the automatic generation of FPGA-based accelerators capable of data filtering and transformation for key-value stores based on simple data-format specifications.The evaluation shows that our framework is able to generate accelerators that are almost identical in performance compared to the manually optimized designs of prior work, while requiring little to no FPGA-specific knowledge and additionally providing improved flexibility and more powerful functionality.
Enterprises and information societies confront crucial challenges currently, while Industry 4.0 becomes important in the global manufacturing industry and Society 5.0 should contribute to a supersmart society, especially for healthcare. Physical activity monitoring digital platforms are architected to improve the healthcare status of patients with diabetes and other lifestyle-related diseases. Furthermore, digital platforms are expected to generate profits for health technology companies and help control costs in the healthcare ecosystem. However, current digital enterprise architecture approaches are not well-established, and the potentials have not yet been realized. Design thinking approach and agile software development methodologies can overcome these limitations, beginning with proof of concept and pilot projects and then scaling to the production environment. In this paper, we describe how that the adaptive integrated digital architecture framework (AIDAF) for Design Thinking approach is proposed and verified in a case of a university hospital in the Americas. In addition, challenges and future activities for this area are discussed that cover the directions for Society 5.0.
This paper presents a generic method to enhance performance and incorporate temporal information for cardiorespiratory-based sleep stage classification with a limited feature set and limited data. The classification algorithm relies on random forests and a feature set extracted from long-time home monitoring for sleep analysis. Employing temporal feature stacking, the system could be significantly improved in terms of Cohen’s κ and accuracy. The detection performance could be improved for three classes of sleep stages (Wake, REM, Non-REM sleep), four classes (Wake, Non-REM-Light sleep, Non-REM Deep sleep, REM sleep), and five classes (Wake, N1, N2, N3/4, REM sleep) from a κ of 0.44 to 0.58, 0.33 to 0.51, and 0.28 to 0.44 respectively by stacking features before and after the epoch to be classified. Further analysis was done for the optimal length and combination method for this stacking approach. Overall, three methods and a variable duration between 30 s and 30 min have been analyzed. Overnight recordings of 36 healthy subjects from the Interdisciplinary Center for Sleep Medicine at Charité-Universitätsmedizin Berlin and Leave-One-Out-Cross-Validation on a patient-level have been used to validate the method.