Nein
Refine
Document Type
- Conference proceeding (597) (remove)
Is part of the Bibliography
- yes (597)
Institute
- Informatik (295)
- Technik (204)
- ESB Business School (81)
- Texoversum (11)
- Life Sciences (7)
Publisher
Evaluation of a contactless accelerometer sensor system for heart rate monitoring during sleep
(2024)
The monitoring of a patient's heart rate (HR) is critical in the diagnosis of diseases. In the detection of sleep disorders, it also plays an important role. Several techniques have been proposed, including using sensors to record physiological signals that are automatically examined and analysed. This work aims to evaluate using a contactless HR monitoring system based on an accelerometer sensor during sleep. For this purpose, the oscillations caused by chest movements during heart contractions are recorded by an installation mounted under the bed mattress. The processing algorithm presented in this paper filters the signals and determines the HR. As a result, an average error of about 5 bpm has been documented, i.e., the system can be considered to be used for the forecasted domain.
Business Process Management (BPM) ist aufgrund seiner Bedeutung für prozessorientierte Unternehmen und den daraus resultierenden Anforderungen hinsichtlich interner Betriebsorganisation und Audits, ein zentraler Bestandteil. Die Einführung und Aufrechterhaltung von BPM stellt jedoch einen erheblichen Aufwand dar, da Prozesse aufgenommen, modelliert und aktuell gehalten werden müssen. Empirische Belege zeigen, dass erfolgreiche Prozessmodellierung dabei eine besondere Herausforderung darstellt, welche häufig nicht zufriedenstellend nachhaltig gelingt. Ein wesentlicher Erfolgsfaktor für die nachhaltige Prozessorientierung in Unternehmen ist somit die konsistente und aktuelle Prozessmodellierung, sowie deren Adaption an externe und interne Veränderungen. Mittels einer Literaturrecherche werden die relevanten Dimensionen zur nachhaltigen Prozessorientierung auf Grundlage der Prozessmodellierung ermittelt. Auf deren Basis wird ein adaptives handlungsorientiertes Framework für die praktische Anwendung in Unternehmen abgeleitet.
Menopause is the permanent cessation of menstruation occurring naturally in women's aging. The most frequent symptoms associated with menopausal phases are mucosal dryness, increased weight and body fat, and changes in sleep patterns. Oral symptoms in menopause derived from saliva flow reduction can lead to dry mouth, ulcers, and alterations of taste and swallowing patterns. However, the oral health phenotype of postmenopausal women has not been characterized. The aim of the study was to determine postmenopausal women's oral phenotype, including medical history, lifestyle, and oral assessment through artificial intelligence algorithms. We enrolled 100 postmenopausal women attending the Dental School of the University of Seville were included in the study. We collected an extensive questionnaire, including lifestyle, medication, and medical history. We used an unsupervised k-means algorithm to cluster the data following standard features for data analysis. Our results showed the main oral symptoms in our postmenopausal cohort were reduced salivary flow and periodontal disease. Relying on the classical assessment of the collected data, we might have a biased evaluation of postmenopausal women. Then, we used artificial intelligence analysis to evaluate our data obtaining the main features and providing a reduced feature defining the oral health phenotype. We found 6 clusters with similar features, including medication affecting salivation or smoking as essential features to obtain different phenotypes. Thus, we could obtain main features considering differential oral health phenotypes of postmenopausal women with an integrative approach providing new tools to assess the women in the dental clinic.
Acting like a startup - using corporate startup structures to manage the digital transformation
(2023)
Digital transformation is proving to be a significant challenge for firms and companies when it comes to maintaining their market position. It is evident that many companies are struggling to find their particular way through this transformation. A corporate startup structure is one way to find a suitable solution quickly. Therefore, we are presenting a model for corporate startup activities, which we will instantiate in an appropriate tool to support the management of corporate startups by their parent firms. We have derived the first requirements and design principles from a comprehensive problem analysis and literature study. In addition to this,we are presenting a first artifact, which should realize the design principles by implementing a practical tool. Forming a cooperation with an automotive firm has enabled us to gain access to real-world data for the design and evaluation of the artifact.
Framework for integrating intelligent product structures into a flexible manufacturing system
(2023)
Increasing individualisation of products with a high variety and shorter product lifecycles result in smaller lot sizes, increasing order numbers, and rising data and information processing for manufacturing companies. To cope with these trends, integrated management of the products and manufacturing information is necessary through a “product-driven” manufacturing system. Intelligent products that are integrated as an active element within the controlling and planning of the manufacturing process can represent flexibility advantages for the system. However, there are still challenges regarding system integration and evaluation of product intel-ligence structures. In light of these trends, this paper proposes a conceptual frame-work for defining, analysing, and evaluating intelligent products using the example of an assembly system. This paper begins with a classification of the existing problems in the assembly and a definition of the intelligence level. In contrast to previous approaches, the analysis of products is expanded to five dimensions. Based on this, a structured evaluation method for a use case is presented. The structure of solving the assembly problem is provided by the use case-specific ontology model. Results are presented in terms of an assignment of different application areas, linking the problem with the target intelligence class and, depending on the intelligence class of the product, suggesting requirements for implementation. The conceptual frame-work is evaluated by utilising a case study in a learning factory. Here, the model-mix assembly is controlled actively by the workpiece carrier in terms of transferring the variant-specific work instructions to the operator and the collaborative robot (cobot) at the workstations. The resulting system thus enables better exploitation of the poten-tials through less frequent errors and shorter search times. Such an implementation has demonstrated that the intelligent workpiece carrier represents an additional part for realising a cyber-physical production system (CPPS).
The strong demand to transform the textile and fashion industry towards sustainability requires continuous implementation of the Education for Sustainable Development (ESD) mission statement in education and industry. To achieve this goal, the European research project "Fashion DIET - Sustainable Fashion Curriculum at Textile Universities in Europe. Development, Implementation and Evaluation of a Teaching Module for Educators", co-funded by the Erasmus+ programme of the European Union (2020-1-DE01-KA203-005657), aims to create an ESD module for university lecturers and research-based teaching and learning materials delivered through an e-learning portal. First, an online questionnaire was rolled out to assess university faculty attitudes toward and needs for ESD content and methods. The feedback questionnaire enabled the selection of the most relevant data for the elaboration of an action and research-oriented professional development module for ESD in textile education, which will be accessible through an information & e-learning portal. The e-learning portal can be used as a web-based tool to apply and evaluate the project outcomes, e.g. the further education module and the teaching and learning materials for educators, such as manuals, broadcasts and the provision of interactive and physical materials. It thus ensures that the teaching materials can be used sustainably in the classroom. It also provides country-specific data for the fashion and textile industry and its market, taking into account the different perspectives of universities and schools. In any case, the portal represents (1) the web-based platform to support the dissemination of ESD as a guiding principle and (2) a central contact point for the target group to obtain relevant information on ESD. Fashion DIET explores the use of e-learning to improve teaching and learning on ESD, by training educators and empowering them as multipliers for a sustainable textile and fashion industry. At a higher level, the European project strengthens the quality and relevance of learning provision in education towards the latest developments in textile research and innovation in terms of a more sustainable fashion.
Because of a high product and technology complexity, companies involve external partners in their research and development (R&D) processes. Interorganizational projects result, which represent temporary organizations. In these projects heterogenous organizations work closely together. Since project work is always teamwork, these projects face due to their characteristic’s major challenges on an organizational, relational, and content-related collaboration level. Thus, this paper raises the following research question: “How can a project team be supported on an organizational, relational, and content-related level in an interorganizational new product development setting?” To answer this research question, an explorative expert study was set up with two digital workshops using the interactive presentation tool Mentimeter. The results show that a cooperative innovation culture could support project teams on an organizational and relational level in the future in minimizing predominant problems. Moreover, it supports project teams for example in a functional communication. Furthermore, 18 values of a cooperative innovation culture result which are for example openness and transparency, risk and failure tolerance or respect. On a content-related level the results show that an adaptable tool which promotes creativity and collaboration method as well as content-related input support could be beneficial for problem-solving in an interorganizational new product development setting in the future. Because the tool can guide product developers through the process with suitable creativity and collaboration methods, can give content-related input and can enable interactive interchange on a table-top. Future research could mainly focus on the connection of the cooperative innovation culture and the tool since these potentially influence each other.
In a recently developed study programme at Reutlingen University, which focuses on practical orientations, an innovative product with solid company references is to be defined and realised by student teams. On the basis of this product, all subjects of the business engineering study programme “Sustainable Production and Business” are taught. By focusing on three main paths of future skills that have been developed by NextSkills to analyse upcoming social changes, global challenges and fields of work that are innovation-driven and agile, the new study programme aims to create responsible leaders who will shape global businesses respectfully. Thereby, different TRIZ tools help to support students in developing their own products with a focus on sustainability and pay off on the future skills enhancement. Further, students get to know TRIZ tools in an unbiased way, unburdened by too much theory, and are thus continuously supported in the progressing product development process that accompanies their studies. Hence, students perceive TRIZ on the one hand as a method to develop sustainable products and, on the other hand, to find sustainable solutions for everyday problems. The knowledge and positive experiences gained in this way should then arouse curiosity for the TRIZ class at the end of the study programme. The students can graduate with a TRIZ Level 1 certificate. Thereby, as many students as possible are introduced to the TRIZ methods, and the TRIZ tool is spread widely.
There are indicators we are entering a new era for MTM research, by moving beyond the structural approach that has characterized MTM research to date, to focus on important and under-researched issues, such as the nature of employees’ experiences in an MTM context. Although team research suggests that the experiences of members impact team functioning, these lines of reasoning have not, until recently, made their way to MTM research. To overcome this limitation, this symposium showcases five papers that use a variety of theoretical perspectives, research designs (i.e., qualitative, quantitative), contexts (e.g., healthcare, automotive manufacturer, online panels), methodologies, and analytical methods (i.e., meta-analysis, content/thematic analysis). The symposium focuses on surfacing and advancing unanswered questions that extend theory and can offer fruitful directions for MTM research by examining critical individual and team level outcomes (e.g., individual/team performance, individual counterproductive and organizational citizenship behavior, individual learning, individual turnover intentions, organizational commitment) in the experiences of MTM employees across their teams (e.g., goals, functions, roles). We hope to provide a forum to advance unanswered questions that offer fruitful directions for MTM research.
Application systems often need to be deployed in different variants if requirements that influence their implementation, hosting, and configuration differ between customers. Therefore, deployment technologies, such as Ansible or Terraform, support a certain degree of variability modeling. Besides, modern application systems typically consist of various software components deployed using multiple deployment technologies that only support their proprietary, non-interoperable variability modeling concepts. The Variable Deployment Metamodel (VDMM) manages the deployment variability across heterogeneous deployment technologies based on a single variable deployment model. However, VDMM currently only supports modeling conditional components and their relations which is sometimes too coarse-grained since it requires modeling entire components, including their implementation and deployment configuration for each different component variant. Therefore, we extend VDMM by a more fine-grained approach for managing the variability of component implementations and their deployment configurations, e.g., if a cheap version of a SaaS deployment provides only a community edition of the software and not the enterprise edition, which has additional analytical reporting functionalities built-in. We show that our extended VDMM can be used to realize variable deployments across different individual deployment technologies using a case study and our prototype OpenTOSCA Vintner.
Mit zunehmender Dynamik im Forschungsumfeld – Digitalisierung der Produktentwicklung – steigen neben der Komplexität auch die technischen Anforderungen an die künftigen Entscheidungsprozesse. Die Einführung von neuen IT-Systemen zur Automation von Entscheidungen haben Anpassungen in den derzeitigen Geschäftsprozessen der Unternehmen zur Folge. Für eine erfolgreiche Implementierung neuer IT-Informationstools gilt es im Voraus mögliche Auswirkungen auf die bisherigen Anwendersysteme genauer zu untersuchen. Neue Technologien, KI-Informationssysteme oder auch neues Wissen entstehen in der Wissenschaft oft durch Interpretation und Synthese von bestehendem Wissen. Aus diesem Grund nimmt die Qualität von Literaturanalysen eine immer größere Relevanz in der Ingenieur- und Informatikwissenschaft ein. Neben der Anzahl an Publikationen wächst auch der Aufwand für die strukturierte Literaturrecherche (SLA). Die Autoren stellen in diesem Paper den Rechercheprozess und die Ergebnisse einer SLA vor. Mit dieser Arbeit soll der derzeitige Forschungsstand zur Entscheidungsunterstützung in der Produktentwicklung von Klein- und mittelständischen Unternehmen sowie Großunternehmen in der
Automobilbranche ermittelt und nach Analyse sowie Bewertung mögliche Forschungslücken zu automatisierten Entscheidungsunterstützungssystemen (aEUS) aufgezeigt werden.
In the era of digital transformation, the notion of software quality transcends its traditional boundaries, necessitating an expansion to encompass the realms of value creation for customers and the business. Merely optimizing technical aspects of software quality can result in diminishing returns. Product discovery techniques can be seen as a powerful mechanism for crafting products that align with an expanded concept of quality - one that incorporates value creation. Previous research has shown that companies struggle to determine appropriate product discovery techniques for generating, validating, and prioritizing ideas for new products or features to ensure they meet the needs and desires of the customers and the business. For this reason, we conducted a grey literature review to identify various techniques for product discovery. First, the article provides an overview of different techniques and assesses how frequently they are mentioned in the literature review. Second, we mapped these techniques to an existing product discovery process from previous research to provide concrete guidelines for establishing product discovery in their organizations. The analysis shows, among other things, the increasing importance of techniques to structure the problem exploration process and the product strategy process. The results are interpreted regarding the importance of the techniques to practical applications and recognizable trends.
Gamification has been increasingly applied to software engineering education in the past. The approaches vary from applying game elements on a conceptual phase in the course to using specific tools to engage the students more and support their learning goals. However, existing tools usually have game elements, such as quizzes or challenges, but do not provide a more computer game-like experience. Therefore, we try to raise the level of gamified learning experience to another level by proposing Gamify-IT. Gamify-IT is a Unity- and web-based game platform intended to help students learn software engineering. It follows an immersive role-play game characteristic where the students explore a world, find and solve minigames and clear dungeons with SE tasks. Lecturers can configure the worlds, e.g., to add content hints. Furthermore, they can add and configure minigames and dungeons to include exercises in a fully gamified way. Thereby, they customize their course in Gamify-IT to adapt the world very precisely to other materials such as lectures or exercises. Results of an evaluation of our initial prototype show that (i) students like to engage with the platform, (ii) students are motivated to learn when using Gamify-IT, and (iii) the minigames support students in understanding the learning objectives.
Impact of a large distribution network on radiation characteristics of planar spiral antenna arrays
(2023)
Designing antenna arrays with a central feed point has gained ground in the antenna technique. This approach, which is usually applied because of manufacturing costs, is difficult to achieve and leads to a large feeding network. The impact of which is numerically investigated in the present work. Upon comparing three different antennas, it is shown that the enlargement of the feed strongly affects the antenna's overall dimensions and the antenna's radiation characteristics. The antenna with the plug-in solution is not only small in size but also performs better compared to antennas with a central feed point. Considering the high effort in designing the feed network with a central point and the influence of the resulting enlarged network on the dimensions and radiation characteristics of the antenna, the cost saving in production can be put into perspective.
Advancing mental health diagnostics: AI-based method for depression detection in patient interviews
(2023)
In this paper, we present a novel artificial intelligence (AI) application for depression detection, using advanced transformer networks to analyse clinical interviews. By incorporating simulated data to enhance traditional datasets, we overcome limitations in data protection and privacy, consequently improving the model’s performance. Our methodology employs BERT-based models, GPT-3.5, and ChatGPT-4, demonstrating state-of-the-art results in detecting depression from linguistic patterns and contextual information that significantly outperform previous approaches. Utilising the DAIC-WOZ and Extended-DAIC datasets, our study showcases the potential of the proposed application in revolutionising mental health care through early depression detection and intervention. Empirical results from various experiments highlight the efficacy of our approach and its suitability for real-world implementation. Furthermore, we acknowledge the ethical, legal, and social implications of AI in mental health diagnostics. Ultimately, our study underscores the transformative potential of AI in mental health diagnostics, paving the way for innovative solutions that can facilitate early intervention and improve patient outcomes.
This research evaluates current measurement scales for ambidexterity and proposes a new approach for the measurement of this important construct. We argue that current measurement approaches may be unsuitable to capture the concept of ambidexterity. Through a systematic scale development process, we derive a measurement scale with dual items that simultaneously refer to both dimensions, exploitation and exploration, thus reflecting the true nature of ambidexterity. An extensive pre-test with 39 executives suggests that our scale is suitable for capturing ambidexterity. Our measurement model enhances conceptual clarity of ambidexterity and can serve as a base for future investigations of the concept.
Human pose estimation (HPE) is integral to scene understanding in numerous safety-critical domains involving human-machine interaction, such as autonomous driving or semi-automated work environments. Avoiding costly mistakes is synonymous with anticipating failure in model predictions, which necessitates meta-judgments on the accuracy of the applied models. Here, we propose a straightforward human pose regression framework to examine the behavior of two established methods for simultaneous aleatoric and epistemic uncertainty estimation: maximum a-posteriori (MAP) estimation with Monte-Carlo variational inference and deep evidential regression (DER). First, we evaluate both approaches on the quality of their predicted variances and whether these truly capture the expected model error. The initial assessment indicates that both methods exhibit the overconfidence issue common in deep probabilistic models. This observation motivates our implementation of an additional recalibration step to extract reliable confidence intervals. We then take a closer look at deep evidential regression, which, to our knowledge, is applied comprehensively for the first time to the HPE problem. Experimental results indicate that DER behaves as expected in challenging and adverse conditions commonly occurring in HPE and that the predicted uncertainties match their purported aleatoric and epistemic sources. Notably, DER achieves smooth uncertainty estimates without the need for a costly sampling step, making it an attractive candidate for uncertainty estimation on resource-limited platforms.
Analog integrated circuit sizing still relies heavily on human expert knowledge as previous automation approaches have not found wide-spread acceptance in industry. One strand, the optimization-based automation, is often discarded due to inflated constraining setups, infeasible results or excessive run times. To address these deficits, this work proposes a alternative optimization flow featuring a designer’s intuition for feasible design spaces through integration of expert knowledge based on the gm/ID-method. Moreover, the extensive run times of simulation-based optimization flows are overcome by incorporating computationally efficient machine learning methods. Neural network surrogate models predicting eleven performance parameters increase the evaluation speed by 3 400× on average compared to a simulator. Additionally, they enable the use of optimization algorithms dependent on automatic differentiation, that would otherwise be unavailable in this field. First, an up to 4× more efficient way for sampling training data based on the aforementioned space is detailed. After presenting the architecture and training effort regarding the surrogate models, they are employed as part of the objective function for sizing three operational amplifiers with three different optimization algorithms. Additionally, the benefits of using the gm/ID-method become evident when considering technology migration, as previously found solutions may be reused for other technologies.
Facing ever-looming climate change, studying the drivers for individuals' Information Systems (IS) Use to reduce environmental harm gains momentum. While extant research on the antecedents of sustainable IS Use has focused on specific theories, interventions, contexts, and technologies, a holistic understanding has become increasingly elusive, with a synthesis remaining absent. We employ a systematic literature review methodology to shed light on the driving antecedents for sustainable IS Use among individual consumers. Our results build on findings of 29 empirical studies drawn from 598 articles retrieved from our premier outlets and a forward/backward search. The analysis reveals six salient complementary antecedents: Relief, Empowerment, Default, User-centricity, Salience, and Encouragement. We recommend considering these concepts when developing, deploying, promoting, or regulating digital technologies to mitigate individual consumers' emissions. Along with memorable and implementable concepts, our theoretical framework offers a novel conceptualization and four promising avenues for researchers on sustainable IS Use.
Smart cities are considered data factories that generate an enormous amount of data from various sources. In fact data is the backbone of any smart services. Therefore, the strategic beneficial handling of this digital capital is crucial for cities. Some smart city pioneers have already written down their approach to data in the form of data strategies, but what should a city's data strategy include, and how can the goals and measures defined in the strategies be operationalized? This paper addresses these questions by looking closely at the data strategies of cities in Germany and the top three countries in the EU Digital Economy and Society Index. The in-depth analysis of 8 city data strategies has yielded 11 dimensions that cities should consider in their data strategy. These are relevance of data, principles, methods, data sharing, technology, data culture, data ethics, organizational structure, data security and privacy, collaborations, data literacy. In addition, data governance is a concept to put these 11 strategic dimensions into practice through standardization measures, training programs, and defining roles and responsibilities by developing a data catalog.
The proliferation of smart technologies transforms the way individual consumers perform tasks. Considerable research alludes that smart technologies are often related to domestic energy consumption. However, it remains unclear how such technologies transform tasks and thereby impact our planet. We explore the role of technological smartness in personal day-to-day tasks that help create a more sustainable future. In the absence of theory, but facing extensive changes in everyday life enabled by smart technologies, we draw on phenomenon-based theorizing (PBT) guidelines. As anchor, we refer to task endogeneity related to task-technology fit theory (TTF). As infusion, we employ theory on public goods. Our model proposes novel relations between the concepts of smart autonomy and -transparency with sustainable task outcomes, mediated by task convenience and task significance. We discuss some implications, limitations, and future research opportunities.
Most Question-answering (QA) systems rely on training data to reach their optimal performance. However, acquiring training data for supervised systems is both time-consuming and resource-intensive. To address this, in this paper, we propose TFCSG, an unsupervised similar question retrieval approach that leverages pre-trained language models and multi-task learning. Firstly, topic keywords in question sentences are extracted sequentially based on a latent topic-filtering algorithm to construct unsupervised training corpus data. Then, the multi-task learning method is used to build the question retrieval model. There are three tasks designed. The first is a short sentence contrastive learning task. The second is the question sentence and its corresponding topic sequence similarity judgment task. The third is using question sentences to generate their corresponding topic sequence task. The three tasks are used to train the language model in parallel. Finally, similar questions are obtained by calculating the cosine similarity between sentence vectors. The comparison experiment on public question datasets that TFCSG outperforms the comparative unsupervised baseline method. And there is no need for manual marking, which greatly saves human resources.
The market for indoor positioning systems for a variety of applications has grown strongly in recent years. A wide range of systems is available, varying considerably in terms of accuracy, price and technology used. The suitability of the systems is highly dependent on the intended application. This paper presents a concept to use a single low-cost PTZ camera in combination with fiducial markers for indoor position and orientation determination. The intended use case is to capture a plant layout consisting of position, orientation and unique identity of individual facilities. Important factors to consider for the selection of a camera have been identified and the transformation of the marker pose in camera coordinates into a selectable plant coordinate system is described. The concept is illustrated by an exemplary practical implementation and its results.
Measuring cardiorespiratory parameters in sleep, using non-contact sensors and the Ballistocardiography technique has received much attention due to the low-cost, unobtrusive, and non-invasive method. Designing a user-friendly, simple-to-use, and easy-to-deployment preserving less error-prone remains open and challenging due to the complex morphology of the signal. In this work, using four forcesensitive resistor sensors, we conducted a study by designing four distributions of sensors, in order to simplify the complexity of the system by identifying the region of interest for heartbeat and respiration measurement. The sensors are deployed under the mattress and attached to the bed frame without any interference with the subjects. The four distributions are combined in two linear horizontal, one linear vertical, and one square, covering the influencing region in cardiorespiratory activities. We recruited 4 subjects and acquired data in four regular sleeping positions, each for a duration of 80 seconds. The signal processing was performed using discrete wavelet transform bior 3.9 and smooth level of 4 as well as bandpass filtering. The results indicate that we have achieved the mean absolute error of 2.35 and 4.34 for respiration and heartbeat, respectively. The results recommend the efficiency of a triangleshaped structure of three sensors for measuring heartbeat and respiration parameters in all four regular sleeping positions.
Large critical systems, such as those created in the space domain, are usually developed by a large number of organizations and, furthermore, they have to comply with standards. Yet, the different stakeholders often do not have a common understanding of the needed quality of requirements specifications. Achieving such a common understanding is a laborious process that is currently not sufficiently supported. Moreover, such a common understanding must be aligned with the standards. In this paper, we present an approach that can be used to align the different stakeholder perceptions regarding the quality of requirements specifications. Existing quality models for requirements specifications are analyzed for equivalences, and transferred into a common representation, the so-called Aligned Quality Map (AQM). Furthermore, a process is defined that supports the alignment of different stakeholder perspectives with regard to the quality of requirements specifications using AQM, which is validated in a case study in the context of European space projects. AQM has been created and populated with an initial set of quality models. It is designed in such way that it can be extended to include further quality models. The case study has shown that an alignment of different stakeholder perspectives and the quality model of the European Cooperation for Space Standardization using AQM is feasible. The approach allows for aligning different stakeholder perspectives for a common understanding of the quality of requirements specifications in the context of standards. Furthermore, AQM supports the assessment of requirements specifications.
The efficient production and utilization of green hydrogen is vital to succeed in the global strive for a sustainable future. To provide the necessary amount of green hydrogen a high number of electrolyzers will be connected as decentralized power consumers to the grid. A large amount of decentralized renewable power sources will provide the energy. In such a system a control method is necessary to dispatch the available power most efficiently. In particular, the shutdown of renewable energy sources due to temporary overproduction must be avoided. This paper presents a decentralized tertiary control algorithm that provides a new decentralized control approach, thus creating a flexible, robust and easily scalable system. The operation of each grid participant within this grid connected microgrid is optimized for maximum financial profit, while minimizing the exchange of power with the mains grid and reducing the shutdown of renewable power sources.
In the context of digital transformation, having a data-driven organizational culture has been recognized as an important factor for data analytics capabilities, innovativeness and competitive advantage of firms. However, the current literature on data-driven culture (DDC) is fragmented, lacking both a synthesis of findings and a theoretical foundation. Therefore, the aim of this work has been to develop a comprehensive framework for understanding DDC and the mechanisms that can be used to embed such a culture in organizations as well as structuring prior dispersed findings on the topic. Based on the foundation of organizational culture theory, we employed a Design Science Research (DSR) approach using a systematic literature review and expert interviews to build and evaluate a transformation-oriented framework. This research contributes to knowledge by synthesizing previously dispersed knowledge in a holistic framework, as well as, by providing a conceptual framework to guide the transformation towards a DDC.
The performance and scalability of modern data-intensive systems are limited by massive data movement of growing datasets across the whole memory hierarchy to the CPUs. Such traditional processor-centric DBMS architectures are bandwidth- and latency-bound. Processing-in-Memory (PIM) designs seek to overcome these limitations by integrating memory and processing functionality on the same chip. PIM targets near- or in-memory data processing, leveraging the greater in-situ parallelism and bandwidth.
In this paper, we introduce pimDB and provide an initial comparison of processor-centric and PIM-DBMS approaches under different aspects, such as scalability and parallelism, cache-awareness, or PIM-specific compute/bandwidth tradeoffs. The evaluation is performed end-to-end on a real PIM hardware system from UPMEM.
Software development teams have to face stress caused by deadlines, staff turnover, or individual differences in commitment, expertise, and time zones. While students are typically taught the theory of software project management, their exposure to such stress factors is usually limited. However, preparing students for the stress they will have to endure once they work in project teams is important for their own sake, as well as for the sake of team performance in the face of stress. Team performance has been linked to the diversity of software development teams, but little is known about how diversity influences the stress experienced in teams. In order to shed light on this aspect, we provided students with the opportunity to self-experience the basics of project management in self-organizing teams, and studied the impact of six diversity dimensions on team performance, coping with stressors, and positive perceived learning effects. Three controlled experiments at two universities with a total of 65 participants suggest that the social background impacts the perceived stressors the most, while age and work experience have the highest impact on perceived learnings. Most diversity dimensions have a medium correlation with the quality of work, yet no significant relation to the team performance. This lays the foundation to improve students’ training for software engineering teamwork based on their diversity-related needs and to create diversity-sensitive awareness among educators, employers and researchers.
For large-scale processes as implemented in organizations that develop software in regulated domains, comprehensive software process models are implemented, e.g., for compliance requirements. Creating and evolving such processes is demanding and requires software engineers having substantial modeling skills to create consistent and certifiable processes. While teaching process engineering to students, we observed issues in providing and explaining models. In this paper, we present an exploratory study in which we aim to shed light on the challenges students face when it comes to modeling. Our findings show that students are capable of doing basic modeling tasks, yet, fail in utilizing models correctly. We conclude that the required skills, notably abstraction and solution development, are underdeveloped due to missing practice and routine. Since modeling is key to many software engineering disciplines, we advocate for intensifying modeling activities in teaching.
Ecuador, traditionally an agricultural based economy, has a great potential for valorizing their industrial residues. This study, presents a techno-economic analysis for applying a novel biomass oxidation method to produce formic and acetic acids from coffee husk residues in Machala, Ecuador. The analysis determined that the time of return of investment was lower than 5 years, making this project economically feasible, when producing approx. 1000 tons of formic acid per year, which is enough for supplying the Ecuadorian market. This production, would reduce imports costs and develop the chemical industry in the country.
Near-Data Processing (NDP) is a key computing paradigm for reducing the ever growing time and energy costs of data transport versus computations. With their flexibility, FPGAs are an especially suitable compute element for NDP scenarios. Even more promising is the exploitation of novel and future non-volatile memory (NVM) technologies for NDP, which aim to achieve DRAM-like latencies and throughputs, while providing large capacity non-volatile storage.
Experimentation in using FPGAs in such NVM-NDP scenarios has been hindered, though, by the fact that the NVM devices/FPGA boards are still very rare and/or expensive. It thus becomes useful to emulate the access characteristics of current and future NVMs using off-the-shelf DRAMs. If such emulation is sufficiently accurate, the resulting FPGA-based NDP computing elements can be used for actual full-stack hardware/software benchmarking, e.g., when employed to accelerate a database.
For this use, we present NVMulator, an open-source easy-to-use hardware emulation module that can be seamlessly inserted between the NDP processing elements on the FPGA and a conventional DRAM-based memory system. We demonstrate that, with suitable parametrization, the emulated NVM can come very close to the performance characteristics of actual NVM technologies, specifically Intel Optane. We achieve 0.62% and 1.7% accuracy for cache line sized accesses for read and write operations, while utilizing only 0.54% of LUT logic resources on a Xilinx/AMD AU280 UltraScale+ FPGA board. We consider both file-system as well as database access patterns, examining the operation of the RocksDB database when running on real or emulated Optane-technology memories.
The increase in distributed energy generation, such as photovoltaic systems (PV) or combined heat and power plants (CHP), poses new challenges to almost every distribution network operator (DNO). In the low-voltage (LV) grids, where installed PV capacity approaches the magnitude of household load, reverse power flow occurs at the secondary substa-tions. High PV penetration leads to voltage rise, flicker and loading problems. These problems have been addressed by the application of various techniques amongst which is the deployment of step voltage regulators (SVR). SVR can solve the voltage problem, but do not prevent or reduce reverse power flows. Therefore, the application of SVR in low voltage grids can result in significant power losses upstream. In this paper we present part of a research project investi-gating the application of remote-controlled cable cabinets (CC) with metering units in a low-voltage network as a possible alternative for SVR. A new generation of custom-made remote-control cable cabinets has been deployed and dynamic network reconfigurations (NR) have been realized with the following objectives: (i) reduction of reverse power flow through the secondary substation to the upstream network and therefore a reduction of upstream losses, (ii) reduction of the voltage rise caused by distributed energy resources and (iii) load balancing in the low-voltage grid. Secondary objec-tives are to improve the DNO's insight into the state of the network and to provide further information on future smart grid integration.
Werkzeugmaschinen sind im Bereich des Maschinen- und Anlagenbau die größte Branche, mit denen auch in Unternehmen anderer Bereiche (z. B. Automobilbau, Aerospace) wesentliche Teile der Bruttowertschöpfung stattfinden. (Destatis, 2022) Das dynamische Verhalten von Werkzeugmaschinen beeinflusst in entscheidendem Maße die Produktivität der Produktionsanlage und die Qualität der darauf erzeugten Werkstücke. Sowohl fremderregte Schwingungen (z. B. Unwucht, Pulsation, periodisch schwankende Prozesskräfte) als auch selbsterregte Schwingungen (z. B. Rattern) führen zu schlechter Qualität der gefertigten Bauteile. Das dynamische Verhalten vonWerkzeugmaschinen wird durch die Masse, Dämpfung und Steifigkeit der einzelnen Komponenten (z. B. Maschinenbett, Ständer, Schlitten) als auch der im Kraftfluss liegenden Fügestellen (z. B. Führungen, Antriebe) beeinflusst. In diesem Beitrag werden die Auswirkungen von konstruktiven Modifikationen der Dämpfung in Gestellbauteilen bezüglich des dynamischen Verhaltens an der Zerspanstelle näher beleuchtet.
OpenAPI, WADL, RAML, and API Blueprint are popular formats for documenting Web APIs. Although these formats are in general both human and machine-readable, only the part of the format describing the syntax of a Web API is machine-understandable. Descriptions, which explain the meaning and purpose of Web API elements, are embedded as natural language text snippets into documents and target human readers but not machines. To enable machines to read and process these state-of-practice Web API documentation, we propose a Transformer model that solves the generic task of identifying a Web API element within a syntax structure that matches a natural language query. For our first prototype, we focus on the Web API integration task of matching output with input parameters and fined-tuned a pre-trained CodeBERT model to the downstream task of question answering with samples from 2,321 OpenAPI documentation. We formulate the original question answering problem as a multiple choice task: given a semantic natural language description of an output parameter (question) and the syntax of the input schema (paragraph), the model chooses the input parameter (answer) in the schema that best matches the description. The paper describes the data preparation, tokenization, and fine-tuning process as well as discusses possible applications of our model as part of a recommender system. Furthermore, we evaluate the generalizability and the robustness of our fine-tuned model, with the result that it achieves an accuracy of 81.46% correctly chosen parameters.
As fuel prices climb and the global automotive sector migrates to more sustainable vehicle technologies, the future of South Africa’s minibus taxis is in flux. The authors’ previous research has found that battery electric technology struggles to meet all the mobility requirements of minibus taxis. They investigate the technical feasibility of powering taxis with hydrogen fuel cells instead. The following results are projected using a custom-built simulator, and tracking data of taxis based in Stellenbosch, South Africa. Each taxi requires around 12 kg of hydrogen gas per day to travel an average distance of 360 km. 465 kWh of electricity, or 860 m2 of solar panels, would electrolyse the required green hydrogen. An economic analysis was conducted on the capital and operational expenses of a system of ten hydrogen taxis and an electrolysis plant. Such a pilot project requires a minimum investment of € 3.8 million (R 75 million), for a 20 year period. Although such a small scale roll-out is technically feasible and would meet taxis’ performance requirements, the investment cost is too high, making it financially unfeasible. They conclude that a large scale solution would need to be investigated to improve financial feasibility; however, South Africa’s limited electrical generation capacity poses a threat to its technical feasibility. The simulator is uploaded at: https://gitlab.com/eputs/ev-fleet-sim-fcv-model.
Modern wide bandgap power devices promise higher power conversion performance if the device can be operated reliably. As switching speed increases, the effects of parasitic ringing become more prominent, causing potentially damaging overvoltages during device turn-off. Estimating the expected additional voltage caused by such ringing enables more reliable designs. In this paper, we present an analytical expression to calculate the expected overvoltage caused by parasitic ringing based on parasitic element values and operating point parameters. Simulations and measurements confirm that the expression can be used to find the smallest rise time of the switches’ drain-source voltage for minimum overvoltage. The given expression also allows the prediction of the trade off overvoltage amplitude in case of faster required rise times.
The relevance of Robotic Process Automation (RPA) has increased over the last few years. Combining RPA with Artificial Intelligence (AI) can further enhance the business value of the technology. The aim of this research was to analyze applications, terminology, benefits, and challenges of combining the two technologies. A total of 60 articles were analyzed in a systematic literature review to evaluate the aforementioned areas. The results show that by adding AI, RPA applications can be used in more complex contexts, it is possible to minimize the human factor during the development process, and AI-based decision-making can be integrated into RPA routines. This paper also presents a current overview of the used terminology. Moreover, it shows that by integrating AI, some unseen challenges in RPA projects can emerge, but also a lot of new benefits will come along with it. Based on the outcome, it is concluded that the topic offers a lot of potential, but further research and development is required. The result of this study help researches to gain an overview of the state-of-the-art in combining RPA and AI.
We present the results of an extensive characterization of the performance and stability of a third-order continuous-time delta-sigma modulator with active coefficient error compensation. Using our previously published coefficient tuning technique, process variation induced R-C time-constant (TC) errors in the forward signal path can be compensated indirectly using continuously tunable DACs in the feedback path. To validate our technique experimentally with a range of real TC variations, we designed a modulator with discretely configurable integration capacitor arrays in a 0.35-μm CMOS process. We configured the capacitors of the fabricated device for a range of total TC variations from -28.4 % to +19.3 % and measured the signal-to-noise ratio (SNR) as a function of the input amplitude before and after compensating the variations electrically using the feedback DACs. The results show that our tuning technique is capable of restoring the desired nominal modulator performance over the entire parameter variation range, including the system’s nominal maximum stable amplitude (MSA).
Governments and public institutions increasingly embrace digital opportunities to involve citizens in public issues and decision making. While public participation is generally seen as an important and promising venture, the design of the participation processes and the utilized digital infrastructure poses challenges, especially to the public sector. Instead of limiting conceptual guidance and exchange to one domain, we therefore develop a taxonomy for digital involvement projects that unites the domains of e-participation, citizen science and crowd-X. Embedded in a design science research approach, we follow an iterative design process to elaborate the key characteristics of a digital involvement project based on the participation process, its individuals and digital infrastructure. Through evaluating the artifact in a focus group with domain practitioners, we find support for the usefulness of our taxonomy and its ability to provide guidance and a basis for discussion of digital involvement projects across domains.
What might the attendee be able to do after being in your session?
Our work shows how to connect intra-operative devices via IEEE 11073 Service-oriented Device Connectivity (SDC).
Description of the Problem or Gap
Standardized device communication is essential for interoperability, availability of device data, and therefore for the intelligent operating room (OR) and arising solutions. The SDC standard was developed to make information from medical devices available in a uniform manner and enable interoperability. Existing devices are rarely SDC-capable and need interfaces to be interoperable via SDC.
Methods: What did you do to address the problem or gap?
We conceived an SDC-based architecture consisting of a service provider and service consumer. In our concept, the service provider is connected to the medical device and capable to translate the proprietary protocol of the device into SDC and vice versa. The service consumer is used to request or send information via the SDC protocol to the service provider and can function as a uniform bidirectional interface (e.g. for displaying or controlling). This concept was exemplarily demonstrated with the patient monitor MX800 of Philips to retrieve the device data (e.g. vital parameters) via SDC and partly for the operating light marLED X of KLS Martin Group.
Results: What was the outcome(s) of what you did to address the problem or gap?
The patient monitor MX800 was connected to a Raspberry Pi (RPi) via LAN, on which the service provider is running. The python script on the RPi establishes a connection to the monitor and translates incoming and outgoing messages from the proprietary protocol to SDC and vice versa to/from the service consumer. The service consumer is running on a laptop and acts as a simulation for different kinds of systems that want to get vital parameters or other information from the patient monitor. The operating light marLED X was connected to an RPi via USB-to-RS232. A python script on the RPi establishes a connection to the light and makes it possible via proprietary commands to get information of the light (e.g. status) and to control it (e.g. toggle the light, increment the intensity). A translation to SDC is not integrated yet.
Discussion of Results
Our practical implementation shows that medical devices can be accessed via external connections to get device data and control the device via commands. The example SDC implementation of the patient monitor MX800 makes it possible to request its data via the standardized communication protocol SDC. This is also possible for the operating light marLED X if its proprietary protocol is analyzed to be translatable to/from SDC. This would allow to control the device from an external system, or automatically depending on the status of the ongoing procedure. The advantage is, that existing intra-operative devices can be extended by a service provider which is capable of translating the proprietary protocol of the device in SDC and vice versa. This enables interoperability and an intelligent OR that, for example, is aware of all devices, their status, and data and can use this information to optimally support the surgeons and their team (e.g. provision of information, automated documentation). This interoperability allows that future innovations merely need to understand the SDC protocol instead of all vendor-dependent communication protocols.
Conclusion
Standardized device communication is essential to reach interoperability, and therefore intelligent ORs. Our contribution addresses the possibility of subsequently making medical devices SDC-capable. This may eliminate the need of understanding all the different proprietary protocols when developing new innovative solutions for the OR.
In recent years, 3D facial reconstructions from single images have garnered significant interest. Most of the approaches are based on 3D Morphable Model (3DMM) fitting to reconstruct the 3D face shape. Concurrently, the adoption of Generative Adversarial Networks (GAN) has been gaining momentum to improve the texture of reconstructed faces. In this paper, we propose a fundamentally different approach to reconstructing the 3D head shape from a single image by harnessing the power of GAN. Our method predicts three maps of normal vectors of the head’s frontal, left, and right poses. We are thus presenting a model-free method that does not require any prior knowledge of the object’s geometry to be reconstructed.
The key advantage of our proposed approach is the substantial improvement in reconstruction quality compared to existing methods, particularly in the case of facial regions that are self-occluded in the input image. Our method is not limited to 3d face reconstruction. It is generic and applicable to multiple kinds of 3D objects. To illustrate the versatility of our method, we demonstrate its efficacy in reconstructing the entire human body.
By delivering a model-free method capable of generating high-quality 3D reconstructions, this paper not only advances the field of 3D facial reconstruction but also provides a foundation for future research and applications spanning multiple object types. The implications of this work have the potential to extend far beyond facial reconstruction, paving the way for innovative solutions and discoveries in various domains.
The aim of this work is the development of artificial intelligence (AI) application to support the recruiting process that elevates the domain of human resource management by advancing its capabilities and effectiveness. This affects recruiting processes and includes solutions for active sourcing, i.e. active recruitment, pre-sorting, evaluating structured video interviews and discovering internal training potential. This work highlights four novel approaches to ethical machine learning. The first is precise machine learning for ethically relevant properties in image recognition, which focuses on accurately detecting and analysing these properties. The second is the detection of bias in training data, allowing for the identification and removal of distortions that could skew results. The third is minimising bias, which involves actively working to reduce bias in machine learning models. Finally, an unsupervised architecture is introduced that can learn fair results even without ground truth data. Together, these approaches represent important steps forward in creating ethical and unbiased machine learning systems.
The 17 SDGs, as agreed upon by the international community, are designed to be implemented across all levels of human activity. Alongside the level of international politics, this also includes the local levels, national politics, wider society, and the economic sphere. Many channels are called on to further implementation, including the transfer of technology to developing and emerging countries. As the patent holders, this must include the active participation of companies. While the literature examines the important role of technology transfer in North-South business-to-business (B2B) partnerships, studies on the technology transfer between European and African companies are scarce. Therefore, in this study we use original data from 26 interviews conducted with managers engaged in sales partnerships between German manufacturers and their distributors in African markets to examine the existence and forms of technology transfer. We find that training and marketing excellence are the predominant forms of technology transfer and based on that suggest a refinement of established frameworks on B2B technology transfer.
Automatic segmentation is essential for the brain tumor diagnosis, disease prognosis, and follow-up therapy of patients with gliomas. Still, accurate detection of gliomas and their sub-regions in multimodal MRI is very challenging due to the variety of scanners and imaging protocols. Over the last years, the BraTS Challenge has provided a large number of multi-institutional MRI scans as a benchmark for glioma segmentation algorithms. This paper describes our contribution to the BraTS 2022 Continuous Evaluation challenge. We propose a new ensemble of multiple deep learning frameworks namely, DeepSeg, nnU-Net, and DeepSCAN for automatic glioma boundaries detection in pre-operative MRI. It is worth noting that our ensemble models took first place in the final evaluation on the BraTS testing dataset with Dice scores of 0.9294, 0.8788, and 0.8803, and Hausdorf distance of 5.23, 13.54, and 12.05, for the whole tumor, tumor core, and enhancing tumor, respectively. Furthermore, the proposed ensemble method ranked first in the final ranking on another unseen test dataset, namely Sub-Saharan Africa dataset, achieving mean Dice scores of 0.9737, 0.9593, and 0.9022, and HD95 of 2.66, 1.72, 3.32 for the whole tumor, tumor core, and enhancing tumor, respectively.
Enterprises and societies currently face essential challenges, and digital transformation can contribute to their resolution. Enterprise architecture (EA) is useful for promoting digital transformation in global companies and information societies covering ecosystem partners. The advancement of new business models can be promoted with digital platforms and architectures for Industry 4.0 and Society 5.0. Therefore, products from the sector of healthcare, manufacturing and energy, etc. can increase in value. The adaptive integrated digital architecture framework (AIDAF) for Industry 4.0 and the design thinking approach is expected to promote and implement the digital platforms and digital products for healthcare, manufacturing and energy communities more efficiently. In this paper, we propose various cases of digital transformation where digital platforms and products are designed and evaluated for digital IT, digital manufacturing and digital healthcare with Industry 4.0 and Society 5.0. The vision of AIDAF applications to perform digital transformation in global companies is explained and referenced, extended toward the digitalized ecosystems such as Society 5.0 and Industry 4.0.
Current advances in Artificial Intelligence (AI) combined with other digitalization efforts are changing the role of technology in service ecosystems. Human-centered intelligent systems and services are the target of many current digitalization efforts and part of a massive digital transformation based on digital technologies. Artificial intelligence, in particular, is having a powerful impact on new opportunities for shared value creation and the development of smart service ecosystems. Motivated by experiences and observations from digitalization projects, this paper presents new methodological experiences from academia and practice on a joint view of digital strategy and architecture of intelligent service ecosystems and explores the impact of digitalization based on real case study results. Digital enterprise architecture models serve as an integral representation of business, information, and technology perspectives of intelligent service-based enterprise systems to support management and development. This paper focuses on the novel aspect of closely aligned digital strategy and architecture models for intelligent service ecosystems and highlights the fundamental business mechanism of AI-based value creation, the corresponding digital architecture, and management models. We present key strategy-oriented architecture model perspectives for intelligent systems.
In today’s education, healthcare, and manufacturing sectors, organizations and information societies are discussing new enhancements to corporate structure and process efficiency using digital platforms. These enhancements can be achieved using digital tools. Industry 5.0 and Society 5.0 give several potentials for businesses to enhance the adaptability and efficacy of their industrial processes, paving the door for developing new business models facilitated by digital platforms. Society 5.0 can contribute to a super-intelligent society that includes the healthcare industry. In the past decade, the Internet of Things, Big Data Analytics, Neural Networks, Deep Learning, and Artificial Intelligence (AI) have revolutionized our approach to various job sectors, from manufacturing and finance to consumer products. AI is developing quickly and efficiently. We have heard of the latest artificial intelligence chatbot, ChatGPT. OpenAI created this, which has taken the internet by storm. We tested the effectiveness of a considerable language model referred to as ChatGPT on four critical questions concerning “Society 5.0”, “Healthcare 5.0”, “Industry,” and “Future Education” from the perspectives of Age 5.0.
Artificial Intelligence (AI) in der Markenführung: Künstliche Neuronale Netze zur Markenimagemessung
(2023)
Da Künstliche Neuronale Netze die Modellierung nichtlinearer und vielschichtiger Beziehungen ermöglichen, befasst sich dieser Beitrag mit deren Einsatzmöglichkeiten für die methodisch anspruchsvolle Analyse und Messung des Markenimages. Zur Veranschaulichung des konzeptionellen Ansatzes wird am empirischen Beispiel des Sportartikelherstellers adidas ein mehrschichtiges Künstliches Neuronales Netz zwischen den Bewertungen spezifischer Markenattribute und der Gesamtbewertung der Marke erzeugt. Auf der Grundlage einer Analyse der Verbindungsgewichte des Künstliches Neuronales Netzes wird die Bedeutung verschiedener Markenattribute für die Markenbewertung gemessen, wodurch sich konkrete Implikationen für die Praxis der Markenführung ableiten lassen.
The dawn of the 21st Century has witnessed a tremendous increase in trade pacts among nations, resulting in renewed hopes for sustainable enterprise development in emerging economies worldwide. Ghana and other sub-Saharan African (SSA) countries have signed onto several North-South and South-South free trade agreements with the hope of strengthening their presence in the international trade arena, and to promote economic growth in SSA. For over two decades, however, very little has changed, and many have dashed their high hopes as enterprises continue to struggle in SSA. Not even the African Continental Free Trade Agreement (AfCFTA) could renew the hopes of sceptics. Several studies opined that enterprises in SSA could improve their domestic and international competitiveness by establishing mutually beneficial partnerships with their counterparts from the Global North and South. This study delved into the issues that affect North-South and South-South business collaborations and recommends key success factors that could help promote mutually beneficial cross-border business partnerships. The research includes both literature and empirical information on the key success factors of business partnerships between African enterprises as well as between African enterprises and firms from the Global North. We approached the study qualitatively using a phenomenological research design. Research participants included important stakeholders in Africa and Europe's international trade and sustainable enterprise development ecosystem. The study identified several challenges with the current business collaborations and recommended new ways of making such partnerships more beneficial.