Refine
Year of publication
Document Type
- Journal article (875) (remove)
Language
- English (875) (remove)
Is part of the Bibliography
- yes (875)
Institute
- ESB Business School (280)
- Life Sciences (277)
- Informatik (180)
- Technik (90)
- Texoversum (45)
- Zentrale Einrichtungen (4)
Publisher
- Elsevier (198)
- MDPI (98)
- Springer (78)
- Wiley (53)
- De Gruyter (39)
- IEEE (30)
- American Chemical Society (24)
- Emerald (21)
- Sage Publishing (15)
- Taylor & Francis (14)
Despite the unstoppable global drive towards electric mobility, the electrification of sub-Saharan Africa’s ubiquitous informal multi-passenger minibus taxis raises substantial concerns. This is due to a constrained electricity system, both in terms of generation capacity and distribution networks. Without careful planning and mitigation, the additional load of charging hundreds of thousands of electric minibus taxis during peak demand times could prove catastrophic. This paper assesses the impact of charging 202 of these taxis in Johannesburg, South Africa. The potential of using external stationary battery storage and solar PV generation is assessed to reduce both peak grid demand and total energy drawn from the grid. With the addition of stationary battery storage of an equivalent of 60 kWh/taxi and a solar plant of an equivalent of 9.45 kWpk/taxi, the grid load impact is reduced by 66%, from 12 kW/taxi to 4 kW/taxi, and the daily grid energy by 58% from 87 kWh/taxi to 47 kWh/taxi. The country’s dependence on coal to generate electricity, including the solar PV supply, also reduces greenhouse gas emissions by 58%.
The introduction of smart contracts has expanded the applicability of blockchains to many domains beyond finance and cryptocurrencies. Moreover, different blockchain technologies have evolved that target special requirements. As a result, in practice, often a combination of different blockchain systems is required to achieve an overall goal. However, due to the heterogeneity of blockchain protocols, the execution of distributed business transactions that span several blockchains leads to multiple interoperability and integration challenges. Therefore, in this article, we examine the domain of Cross-Chain Smart Contract Invocations (CCSCIs), which are distributed transactions that involve the invocation of smart contracts hosted on two or more blockchain systems. We conduct a systematic multi-vocal literature review to get an overview of the available CCSCI approaches. We select 20 formal literature studies and 13 high-quality gray literature studies, extract data from them, and analyze it to derive the CCSCI Classification Framework. With the help of the framework, we group the approaches into two categories and eight subcategories. The approaches differ in multiple characteristics, e.g., the mechanisms they follow, and the capabilities and transaction processing semantics they offer. Our analysis indicates that all approaches suffer from obstacles that complicate real-world adoption, such as the low support for handling heterogeneity and the need for trusted third parties.
In this paper, the essential sponsorship basics are presented and the communication instrument of sports sponsorship is illustrated. Building on this, both the perspectives of sponsors and sponsees are examined in detail. In addition, the special features of sports event sponsorships are highlighted. Finally, current developments in sports sponsorship in the context of the FIFA Soccer World Cup 2022 in Qatar and the UEFA European Soccer Championship 2024 in Germany are compared and discussed.
Wave-like differential equations occur in many engineering applications. Here the engineering setup is embedded into the framework of functional analysis of modern mathematical physics. After an overview, the –Hilbert space approach to free Euler–Bernoulli bending vibrations of a beam in one spatial dimension is investigated. We analyze in detail the corresponding positive, selfadjoint differential operators of 4-th order associated to the boundary conditions in statics. A comparison with free string wave swinging is outlined.
Comparative analysis of the chemical and rheological curing kinetics of formaldehyde-based wood adhesives is crucial for assessing their respective performance. Differential scanning calorimetry (DSC) and rheometry are the conventional techniques used for monitoring the curing processes leading to crosslinking polymerization of the adhesives. However, the direct comparison of these techniques is inappropriate due to the intrinsic differences in their underlying procedures. To address this challenge, the two adhesive samples were sequentially cured, firstly with rheometry and followed by DSC. The observed higher curing degree in the subsequent DSC procedure underpins the incomplete curing of the samples during initial rheometry. Furthermore, the comparative assessment of the activation energies, molar ratios, and active groups of the two adhesives highlights the importance of the pre-exponential factor in addition to the activation energies, as it attributes to the probability of active groups coinciding at the appropriate spatial arrangement.
Tech hubs (THs) and cognate structures are nowadays ubiquitous in the innovation ecosystem of Sub-Saharan African (SSA) countries. However, the concept of THs is fuzzy due to the lack of a clear and universally accepted definition. This ambiguity is further compounded by the diverse range of organizations that self-identify as hubs, or are categorized as such by others. As a result, research on THs in SSA remained limited. Against the backdrop of established research on the interconnectedness of technology, innovation and entrepreneurship in different organizational forms, this paper is meant to provide fresh insights into the study of THs in SSA. To advance future research, first, it reveals what is special about THs in SSA and how they are related to existing concepts. I particularly argue that they contour a fourth-wave model of incubation. Second, four main categories are unfolded to delineate THs in SSA which is the cornerstone for future research.
Salivary gland tumors (SGTs) are a relevant, highly diverse subgroup of head and neck tumors whose entity determination can be difficult. Confocal Raman imaging in combination with multivariate data analysis may possibly support their correct classification. For the analysis of the translational potential of Raman imaging in SGT determination, a multi-stage evaluation process is necessary. By measuring a sample set of Warthin tumor, pleomorphic adenoma and non-tumor salivary gland tissue, Raman data were obtained and a thorough Raman band analysis was performed. This evaluation revealed highly overlapping Raman patterns with only minor spectral differences. Consequently, a principal component analysis (PCA) was calculated and further combined with a discriminant analysis (DA) to enable the best possible distinction. The PCA-DA model was characterized by accuracy, sensitivity, selectivity and precision values above 90% and validated by predicting model-unknown Raman spectra, of which 93% were classified correctly. Thus, we state our PCA-DA to be suitable for parotid tumor and non-salivary salivary gland tissue discrimination and prediction. For evaluation of the translational potential, further validation steps are necessary.
Purpose
As a response to the increased frequency of disruptive events and intense competition, organizational agility has become a key concept in organizational research. Fostering organizational agility requires leveraging knowledge that exists both outside (exploration) and inside (exploitation) the organization. This research tests the so-called ambidexterity hypothesis, which claims that a balance between exploration and exploitation leads to increased organizational outcomes, including the development of organizational agility. Complementing previously established measurement models on ambidexterity, this research proposes an alternative measurement model to analyze how ambidexterity can enhance organizational agility and, indirectly, performance, taking into consideration the moderating effect of environmental competitiveness.
Design/methodology/approach
A review of existing measurement models for ambidexterity shows that tension, a crucial aspect of ambidexterity, is often neglected. The authors, therefore, develop a new measurement model of ambidexterity to incorporate ambidexterity-induced tension. Using this measurement model, they examine the effect of ambidexterity on the development of entrepreneurial and adaptive agility as well as performance.
Findings
Ambidexterity positively influences both entrepreneurial and adaptive agility, indicating that a balance between exploration and exploitation has superior organizational effects. This finding confirms the ambidexterity hypothesis with respect to organizational agility. Furthermore, both entrepreneurial and adaptive agility drive organizational performance. These two indirect effects via agility fully mediate the impact of ambidexterity on organizational performance. Finally, environmental competitiveness positively moderates the relationship between ambidexterity and adaptive agility.
Originality/value
The findings extend research on ambidexterity by showing its positive effects on organizational agility. Furthermore, the study proposes an alternative operationalization to capture the ambidexterity construct that may lay the groundwork for further applications of the ambidexterity concept.
Automatic content creation system for augmented reality maintenance applications for legacy machines
(2024)
Augmented reality (AR) applications have great potential to assist maintenance workers in their operations. However, creating AR solutions is time-consuming and laborious, which limits its widespread adoption in the industry. It therefore often happens that even with the latest generation machines, instead of an AR solution, the user only receives an electronic manual for the equipment operation and maintenance. This is commonplace with legacy machines. For this reason, solutions are required that simplify the creation of such AR solutions. This paper presents an approach using an electronic manual as a basis to create fast and cost-effective AR solutions for maintenance. As part of the approach, an application was developed to automatically identify and subdivide the chapters of electronic manuals via the bookmarks in the table of contents. The contents are then automatically uploaded to a central server and indexed with a suitable marker to make the data retrievable. The prepared content can then be accessed for creating context-related AR instructions via the marker. The application is characterized by the fact that no developers or experts are required to prepare the information. In addition to complying with common design criteria, the clear presentation of the contents and the intuitive use of the system offer added value for the performance of maintenance tasks. Together, these two elements form a novel way to retrofit legacy machines with AR maintenance instructions. The practical validation of the system took place in a factory environment. For this purpose, the content was created for a filter change on a CNC milling machine. The results show that inexperienced users can extract appropriate content with the software application. Furthermore, it is shown that maintenance workers, can access the content with an AR application developed for the Microsoft HoloLens 2 and complete simple tasks provided in the manufacturer's electronic manual.
Based on social information processing theory, this research examines whether and how an employee’s proactive personality influences intrinsic and extrinsic career growth. It also examines the mediating effects of two types of proactive behaviors (voice behavior and taking charge) and the moderating effect of a leader’s proactive personality. A sample of 307 employee-leader dyads participated in this survey. Structural equation modeling was used to test the hypotheses, and the bootstrap procedure was used to test the indirect effects. Results show that an employee’s proactive personality has significant positive effects on both intrinsic and extrinsic career growth. The mediating effect of taking charge was confirmed, while the mediating effect of voice behavior was not. Leader proactive personality weakens the relationship between employee proactive personality and the two types of proactive behaviors. Employee proactive personality is more positively related to intrinsic and extrinsic career growth via proactive behaviors when a leader’s proactive personality is low. This study extends the literature on proactive personality, proactive behavior, and career development by examining the underlying determination, mediation, and moderation mechanisms.
Student-faculty interactions that promote learning are essential contributors to student retention, academic success and satisfaction. But the factors that causally initiate and frame these interactions are not well understood. Only if students evaluate these interactions as positive will they seek them. We conducted a survey experiment with students (n = 375) from a tuition-fee-free German business school, using conditional process analysis to assess which factors frame effective interactions. We focus on out-of-classroom standard and non-standard requests that students make to faculty, then investigate how faculty and student gender and students’ academic entitlement influence the interaction. Our study examines how students evaluate the interaction with faculty: when they seek interaction, their expectations of getting their requests approved, and their disappointment when their requests are declined. We find a significant influence of the request type along with moderating effects of faculty gender, student gender and student entitlement, particularly for non-standard work requests. We conclude with policy implications for university management: developing target-group-specific measures that facilitate the desired and positively evaluated student-faculty interactions might benefit all university stakeholders.
For optimization of production processes and product quality, often knowledge of the factors influencing the process outcome is compulsory. Thus, process analytical technology (PAT) that allows deeper insight into the process and results in a mathematical description of the process behavior as a simple function based on the most important process factors can help to achieve higher production efficiency and quality. The present study aims at characterizing a well-known industrial process, the transesterification reaction of rapeseed oil with methanol to produce fatty acid methyl esters (FAME) for usage as biodiesel in a continuous micro reactor set-up. To this end, a design of experiment approach is applied, where the effects of two process factors, the molar ratio and the total flow rate of the reactants, are investigated. The optimized process target response is the FAME mass fraction in the purified nonpolar phase of the product as a measure of reaction yield. The quantification is performed using attenuated total reflection infrared spectroscopy in combination with partial least squares regression. The data retrieved during the conduction of the DoE experimental plan were used for statistical analysis. A non-linear model indicating a synergistic interaction between the studied factors describes the reactor behavior with a high coefficient of determination (R²) of 0.9608. Thus, we applied a PAT approach to generate further insight into this established industrial process.
This article provides a stochastic agent-based model to exhibit the role of aggregation metrics in order to mitigate polarization in a complex society. Our sociophysics model is based on interacting and nonlinear Brownian agents, which allow us to study the emergence of collective opinions. The opinion of an agent, x i (t) is a continuous positive value in an interval [0, 1]. We find (i) most agent-metrics display similar outcomes. (ii) The middle-metric and noisy-metric obtain new opinion dynamics either towards assimilation or fragmentation. (iii) We show that a developed 2-stage metric provide new insights about convergence and equilibria. In summary, our simulation demonstrates the power of institutions, which affect the emergence of collective behavior. Consequently, opinion formation in a decentralized complex society is reliant to the individual information processing and rules of collective behavior.
How mechanical and physicochemical material characteristics influence adipose-derived stem cell fate
(2023)
Adipose-derived stem cells (ASCs) are a subpopulation of mesenchymal stem cells. Compared to bone marrow-derived stem cells, they can be harvested with minimal invasiveness. ASCs can be easily expanded and were shown to be able to differentiate into several clinically relevant cell types. Therefore, this cell type represents a promising component in various tissue engineering and medical approaches (e.g., cell therapy). In vivo cells are surrounded by the extracellular matrix (ECM) that provides a wide range of tissue-specific physical and chemical cues, such as stiffness, topography, and chemical composition. Cells can sense the characteristics of their ECM and respond to them in a specific cellular behavior (e.g., proliferation or differentiation). Thus, in vitro biomaterial properties represent an important tool to control ASCs behavior. In this review, we give an overview of the current research in the mechanosensing of ASCs and current studies investigating the impact of material stiffens, topography, and chemical modification on ASC behavior. Additionally, we outline the use of natural ECM as a biomaterial and its interaction with ASCs regarding cellular behavior.
In countries such as Germany, where municipalities have planning sovereignty, problems of urban sprawl often arise. As the dynamics of land development have not substantially subsided over the last years, the national government decided to test the instrument of ‘Tradable Planning Permits’ (TPP) in a nationwide field experiment with 87 municipalities involved. The field experiment was able to implement the key features of a TPP system in a laboratory setting with approximated real socioeconomic and planning conditions. In a TPP system allocated planning permits must be used by municipalities for developing land. The permits can be traded between local jurisdictions, so that they have flexibility in deciding how to comply with the regulation. In order to evaluate the performance of such a system, specific field data about future building areas and their impact on community budgets for the period 2014–2028 were collected. The field experiment contains several sessions with representatives of the municipalities and with students. The participants were confronted with two (municipalities) and four (students) schemes. The results show that a trading system can curb down land development in an effective and also efficient manner. However, depending on the regulatory framework, the trading schemes show different price developments and distributional effects. The unexperienced representatives of the local authorities can easily handle with the permits in the administration and in the established market. A trading scheme sets very high incentives to save open space and to direct development activities to areas within existing planning boundaries. It is therefore a promising instrument for Germany and also other regions or countries with an established land-use planning system.
At the beginning of 2022, Frontiers in Bioengineering and Biotechnology - Biomaterials Section has published a Research Topic on “Functional Surfaces and Biomaterials.” The aim of this Research Topic is to summarize the current state of research and development in the field of functional surfaces and biomaterials with a particular focus on biotechnological and medical applications.
The guest editorial team would like to thank all colleagues from around the world who submitted their reviews and research articles for the Research Topic. By the end of August 2022, we have successfully collected 20 articles by 138 participating authors following the peer review process. We also tried to select manuscripts from different research areas to cover the most relevant Research Topic of interest, from drug delivery systems to bone tissue engineering to biosensors and general aspects in biomedicine. By the end of December, the 20 articles had been viewed for more than 21000 times with downloads more than 4,000 times, and 11 articles have reached more than 1,000 views.
Titanium(IV) surface complexes bearing chelating catecholato ligands for enhanced band-gap reduction
(2023)
Protonolysis reactions between dimethylamido titanium(IV) catecholate [Ti(CAT)(NMe2)2]2 and neopentanol or tris(tert-butoxy)silanol gave catecholato-bridged dimers [(Ti(CAT)(OCH2tBu)2)(HNMe2)]2 and [Ti(CAT){OSi(OtBu)3}2(HNMe2)2]2, respectively. Analogous reactions using the dimeric dimethylamido titanium(IV) (3,6-di-tert-butyl)catecholate [Ti(CATtBu2-3,6)(NMe2)2]2 yielded the monomeric Ti(CATtBu2-3,6)(OCH2tBu)2(HNMe2)2 and Ti(CATtBu2-3,6)[OSi(OtBu)3]2(HNMe2)2. The neopentoxide complex Ti(CATtBu2-3,6)(OCH2tBu)2(HNMe2)2 engaged in further protonolysis reactions with Si–OH groups and was consequentially used for grafting onto mesoporous silica KIT-6. Upon immobilization, the surface complex [Ti(CATtBu2-3,6)(OCH2tBu)2(HNMe2)2]@[KIT-6] retained the bidentate chelating geometry of the catecholato ligand. This convergent grafting strategy was compared with a sequential and an aqueous approach, which gave either a mixture of bidentate chelating species with a bipodally anchored Ti(IV) center along with other physisorbed surface species or not clearly identifiable surface species. Extension of the convergent and aqueous approaches to anatase mesoporous titania (m-TiO2) enabled optical and electronic investigations of the corresponding surface species, revealing that the band-gap reduction is more pronounced for the bidentate chelating species (convergent approach) than for that obtained via the aqueous approach. The applied methods include X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and solid-state UV/vis spectroscopy. The energy-level alignment for the surface species from the aqueous approach, calculated from experimental data, accounts for the well-known type II excitation mechanism, whereas the findings indicate a distinct excitation mechanism for the bidentate chelating surface species of the material [Ti(CATtBu2-3,6)(OCH2tBu)2(HNMe2)2]@[m-TiO2].
The Commitment of Traders report (CoT) has been around for over 30 years, consistently revealing the futures positions of key market players. This study's primary aim is to use the comprehensive data from the Commitment of Traders reports to develop a short-term reversal trading strategy. Against the benchmark, a S&P 500 buy-and-hold approach with a Sharpe ratio of 1.07, the CoT long only strategy generated significant results in six individual markets. Extending the strategy to long-and-short, two markets outperformed the benchmark significantly. However, a scenario analysis indicated underperformance of the CoT strategy when traded in a portfolio, confirming that the chosen strategy parameters could not generate excess Sharpe ratios. Our results indicate that the Commodity Futures Trading Commission, more specifically the CoT report, contributed to efficient derivatives market.
Purpose
The authors study the valuation effect of corporate diversification in the initial phase of the COVID-19 pandemic in 2020 in Europe.
Design/methodology/approach
Applying a cross-sectional regression model to a sample of public companies headquartered in the European Union, the authors investigate the existence of and the change in a diversification discount between 2018 and 2020. By applying the Excess Q methodology, the authors make an industry adjustment of diversified companies to measure the value effect of corporate diversification.
Findings
The authors find an economically and statistically significant diversification discount that increases from an average Excess Q of −0.05 in 2019 to −0.10 in 2020. The diversified companies' inferior fundamental financial performance in 2020 accompanies the discount. The results deviate from those of previous research, which mostly show a decrease in the diversification discount in economic crises, and thereby, shed doubt on whether diversification provides insurance against pandemic-induced adverse value effects.
Originality/valueThe study distinguishes the role of corporate diversification during recessionary periods by establishing that the valuation effect of diversification depends on the nature of the crisis. The analysis incorporates criticism of previous studies concerning a biased methodology and uniform data source by applying the Excess Q methodology and using FactSet industry segment data.
Polyester fibers are widely employed in a multitude of sectors and applications from the technical textiles to everyday life thanks to their durability, strength, and flexibility. Despite these advantages, polyester lacks in dyeability, adhesion of coating, hydrophilicity, and it is characterized by a low wettability respect to natural fibers. On this regard, beyond the harmful hydrophobic textile finishings of polyester fabrics containing fluorine-compounds, and in order to avoid pre-treatments, such as laser irradiation to improve their surface properties, research is moving towards the development of fluorine-free and safer coatings. In this work, the (3-glycidyloxypropyl)trimethoxysilane (GPTMS) and various long alkyl-chain alkoxysilanes were employed for the fabrication in the presence of a catalyst of a water-based superhydrophobic finishing for polyester fabrics with a simple sol-gel, non-fluorinated, sustainable approach and the dip-pad-dry-cure method. The finished polyester fabrics surface properties were investigated by static and dynamic water repellency tests. Additionally, the resistance to common water-based liquids, abrasion resistance, moisture adsorption, and air permeability measurements were performed. Scanning electron microscopy was employed to examine the micro- and nano-morphology of the functionalized polyester fabrics surfaces. The obtained superhydrophobic finishings displayed high water-based stain resistance as well as good hydrophobicity after different cycles of abrasion.
Artificial intelligence is considered to be a significant technology for driving the future evolution of smart manufacturing environments. At the same time, automated guided vehicles (AGVs) play an essential role in manufacturing systems due to their potential to improve internal logistics by increasing production flexibility. Thereby, the productivity of the entire system relies on the quality of the schedule, which can achieve production cost savings by minimizing delays and the total makespan. However, traditional scheduling algorithms often have difficulties in adapting to changing environment conditions, and the performance of a selected algorithm depends on the individual scheduling problem. Therefore, this paper aimed to analyze the scheduling problem classes of AGVs by applying design science research to develop an algorithm selection approach. The designed artifact addressed a catalogue of characteristics that used several machine learning algorithms to find the optimal solution strategy for the intended scheduling problem. The contribution of this paper is the creation of an algorithm selection method that automatically selects a scheduling algorithm, depending on the problem class and the algorithm space. In this way, production efficiency can be increased by dynamically adapting the AGV schedules. A computational study with benchmark literature instances unveiled the successful implementation of constraint programming solvers for solving JSSP and FJSSP scheduling problems and machine learning algorithms for predicting the most promising solver. The performance of the solvers strongly depended on the given problem class and the problem instance. Consequently, the overall production performance increased by selecting the algorithms per instance. A field experiment in the learning factory at Reutlingen University enabled the validation of the approach within a running production scenario.
Supply chains have evolved into dynamic, interconnected supply networks, which increases the complexity of achieving end-to-end traceability of object flows and their experienced events. With its capability of ensuring a secure, transparent, and immutable environment without relying on a trusted third party, the emerging blockchain technology shows strong potential to enable end-to-end traceability in such complex multitiered supply networks. This paper aims to overcome the limitations of existing blockchain-based traceability architectures regarding their object-related event mapping ability, which involves mapping the creation and deletion of objects, their aggregation and disaggregation, transformation, and transaction, in one holistic architecture. Therefore, this paper proposes a novel ‘blueprint-based’ token concept, which allows clients to group tokens into different types, where tokens of the same type are non-fungible. Furthermore, blueprints can include minting conditions, which, for example, are necessary when mapping assembly processes. In addition, the token concept contains logic for reflecting all conducted object-related events in an integrated token history. Finally, for validation purposes, this article implements the architecture’s components in code and proves its applicability based on the Ethereum blockchain. As a result, the proposed blockchain-based traceability architecture covers all object-related supply chain events and proves its general-purpose end-to-end traceability capabilities of object flows.
Cytocompatibility analyses of new implant materials or biomaterials are not only prescribed by the Medical Device Regulation (MDR), as defined in the DIN ISO Norm 10993-5 and -12, but are also increasingly replacing animal testing. In this context, jellyfish collagen has already been established as an alternative to mammalian collagen in different cell culture conditions, but a lack of knowledge exists about its applicability for cytocompatibility analyses of biomaterials. Thus, the present study was conducted to compare well plates coated with collagen type 0 derived from Rhizostoma pulmo with plates coated with bovine and porcine collagen. The coated well plates were analysed in vitro for their cytocompatibility, according to EN ISO 10993-5/−12, using both L929 fibroblasts and MC3T3 pre-osteoblasts. Thereby, the coated well plates were compared, using established materials as positive controls and a cytotoxic material, RM-A, as a negative control. L929 cells exhibited a significantly higher viability (#### p < 0.0001), proliferation (## p < 0.01), and a lower cytotoxicity (## p < 0.01 and # p < 0.05)) in the Jellagen® group compared to the bovine and porcine collagen groups. MC3T3 cells showed similar viability and acceptable proliferation and cytotoxicity in all collagen groups. The results of the present study revealed that the coating of well plates with collagen Type 0 derived from R. pulmo leads to comparable results to the case of well plates coated with mammalian collagens. Therefore, it is fully suitable for the in vitro analyses of the cytocompatibility of biomaterials or medical devices.
This paper presents a description model for smart, connected devices used in a manufacturing context. Similar to the wide spread adoption of smart products for personal and private usage, recent developments lead to a plethora of devices offering a variety of features and capabilities. Manufacturing companies undergoing digital transformation demand guidance with respect to the systematic introduction of smart, connected devices. The introduction of smart connected devices constitutes a strategic decision cost due to the high future committed cost after introduction and maintaining a smart device fleet by a vendor. This paper aims to support the introduction efforts by classifying the devices and thus helping companies identify their specific requirements for smart, connected devices before initiating widespread procurement. By mapping the features of these devices based on various attributes, allows the clustering of smart, connected devices including a requirement list for their implementation on the shopfloor. Four individual commercially available smart connected devices were analyzed using the description model.
Parallel grippers offer multiple applications thanks to their flexibility. Their application field ranges from aerospace and automotive to medicine and communication technologies. However, the application of grippers has the problem of exhibition wear and errors during the execution of their operation. This affects the performance of the gripper. In this context, the remaining useful life (RUL) defines the remaining lifespan until failure for an asset at a particular time of operation occurs. The exact lifespan of an asset is uncertain, thus the RUL model and estimation must be derived from available sources of information. This paper presents a method for the estimation of the RUL for a two-jaw parallel gripper. After the introduction to the topic, an overview of existing literature and RUL methods are presented. Subsequently, the method for estimating the RUL of grippers is explained. Finally, the results are summarized and discussed before the outlook and further challenges are presented.
In order to ensure sufficient recovery of the human body and brain, healthy sleep is indispensable. For this purpose, appropriate therapy should be initiated at an early stage in the case of sleep disorders. For some sleep disorders (e.g., insomnia), a sleep diary is essential for diagnosis and therapy monitoring. However, subjective measurement with a sleep diary has several disadvantages, requiring regular action from the user and leading to decreased comfort and potential data loss. To automate sleep monitoring and increase user comfort, one could consider replacing a sleep diary with an automatic measurement, such as a smartwatch, which would not disturb sleep. To obtain accurate results on the evaluation of the possibility of such a replacement, a field study was conducted with a total of 166 overnight recordings, followed by an analysis of the results. In this evaluation, objective sleep measurement with a Samsung Galaxy Watch 4 was compared to a subjective approach with a sleep diary, which is a standard method in sleep medicine. The focus was on comparing four relevant sleep characteristics: falling asleep time, waking up time, total sleep time (TST), and sleep efficiency (SE). After evaluating the results, it was concluded that a smartwatch could replace subjective measurement to determine falling asleep and waking up time, considering some level of inaccuracy. In the case of SE, substitution was also proved to be possible. However, some individual recordings showed a higher discrepancy in results between the two approaches. For its part, the evaluation of the TST measurement currently does not allow us to recommend substituting the measurement method for this sleep parameter. The appropriateness of replacing sleep diary measurement with a smartwatch depends on the acceptable levels of discrepancy. We propose four levels of similarity of results, defining ranges of absolute differences between objective and subjective measurements. By considering the values in the provided table and knowing the required accuracy, it is possible to determine the suitability of substitution in each individual case. The introduction of a “similarity level” parameter increases the adaptability and reusability of study findings in individual practical cases.
The scoring of sleep stages is one of the essential tasks in sleep analysis. Since a manual procedure requires considerable human and financial resources, and incorporates some subjectivity, an automated approach could result in several advantages. There have been many developments in this area, and in order to provide a comprehensive overview, it is essential to review relevant recent works and summarise the characteristics of the approaches, which is the main aim of this article. To achieve it, we examined articles published between 2018 and 2022 that dealt with the automated scoring of sleep stages. In the final selection for in-depth analysis, 125 articles were included after reviewing a total of 515 publications. The results revealed that automatic scoring demonstrates good quality (with Cohen's kappa up to over 0.80 and accuracy up to over 90%) in analysing EEG/EEG + EOG + EMG signals. At the same time, it should be noted that there has been no breakthrough in the quality of results using these signals in recent years. Systems involving other signals that could potentially be acquired more conveniently for the user (e.g. respiratory, cardiac or movement signals) remain more challenging in the implementation with a high level of reliability but have considerable innovation capability. In general, automatic sleep stage scoring has excellent potential to assist medical professionals while providing an objective assessment.
Background: Polysomnography (PSG) is the gold standard for detecting obstructive sleep apnea (OSA). However, this technique has many disadvantages when using it outside the hospital or for daily use. Portable monitors (PMs) aim to streamline the OSA detection process through deep learning (DL).
Materials and methods: We studied how to detect OSA events and calculate the apnea-hypopnea index (AHI) by using deep learning models that aim to be implemented on PMs. Several deep learning models are presented after being trained on polysomnography data from the National Sleep Research Resource (NSRR) repository. The best hyperparameters for the DL architecture are presented. In addition, emphasis is focused on model explainability techniques, concretely on Gradient-weighted Class Activation Mapping (Grad-CAM).
Results: The results for the best DL model are presented and analyzed. The interpretability of the DL model is also analyzed by studying the regions of the signals that are most relevant for the model to make the decision. The model that yields the best result is a one-dimensional convolutional neural network (1D-CNN) with 84.3% accuracy.
Conclusion: The use of PMs using machine learning techniques for detecting OSA events still has a long way to go. However, our method for developing explainable DL models demonstrates that PMs appear to be a promising alternative to PSG in the future for the detection of obstructive apnea events and the automatic calculation of AHI.
Purpose – This paper explores, which employer attractiveness attributes Generation Z (Gen Z) talents prioritize. Comparing the findings for female and male participants, this study examines whether gender-specific work value orientations prevail among Gen Z talents and impact their expectations toward employers.
Design/methodology/approach – A survey was conducted among 308 students of business, economics and management in Germany. Data were collected using the employer attractiveness scale of Berthon and colleagues (2005) complemented by an additional dimension focusing on work–life balance.
Findings – Findings indicate that Gen Z talents primarily expect a fun work environment, a positive team atmosphere and supportive relations with colleagues and superiors. Application aspects and work–life balance enabling services are expected the least. Expectations of four of the six attributes measured differ significantly among women and men, indicating that traditional gender assumptions continue to be reflected in the work value orientations of Gen Z talents.
Research limitations/implications – The sample was limited to business, economics and management students in Germany. Additional research should include a wider variety of respondents of different disciplines and countries.
Practical implications – Practical implications refer to emphasizing the social value of employment in the employee value proposition and customizing employer branding activities by gender.
Originality/value – This study contributes to the literature by empirically determining which employer attractiveness attributes Gen Z talents expect and whether and how these expectations vary by gender.
The pH value of the human skin is not in the neutral range but is slightly acidic with values of – depending on the body part – 3.5 to 6. This provides a suitable habitat for the commensal skin floral but has a killing effect on some pathogenic micro-organisms and an inactivating effect on some viruses. This protective acid mantle of the skin thus represents a first external protective layer against infestation by pathogens. An appropriate surface pH on textiles can help to minimize the transmission of pathogens through the clothing of healthcare workers while at the same time not exerting a negative influence on the skin’s own flora. In addition, the colonization of e.g. bed linen by pathogenic microorganisms can be reduced. This can also have a positive influence on bacteria-associated odor formation on functional clothing.
Purpose
In recognising the key role of business intelligence and big data analytics in influencing companies’ decision-making processes, this paper aims to codify the main phases through which companies can approach, develop and manage big data analytics.
Design/methodology/approach
By adopting a research strategy based on case studies, this paper depicts the main phases and challenges that companies “live” through in approaching big data analytics as a way to support their decision-making processes. The analysis of case studies has been chosen as the main research method because it offers the possibility for different data sources to describe a phenomenon and subsequently to develop and test theories.
Findings
This paper provides a possible depiction of the main phases and challenges through which the approach(es) to big data analytics can emerge and evolve over time with reference to companies’ decision-making processes.
Research limitations/implications
This paper recalls the attention of researchers in defining clear patterns through which technology-based approaches should be developed. In its depiction of the main phases of the development of big data analytics in companies’ decision-making processes, this paper highlights the possible domains in which to define and renovate approaches to value. The proposed conceptual model derives from the adoption of an inductive approach. Despite its validity, it is discussed and questioned through multiple case studies. In addition, its generalisability requires further discussion and analysis in the light of alternative interpretative perspectives.
Practical implications
The reflections herein offer practitioners interested in company management the possibility to develop performance measurement tools that can evaluate how each phase can contribute to companies’ value creation processes.
Originality/value
This paper contributes to the ongoing debate about the role of digital technologies in influencing managerial and social models. This paper provides a conceptual model that is able to support both researchers and practitioners in understanding through which phases big data analytics can be approached and managed to enhance value processes.
Sleep is essential to physical and mental health. However, the traditional approach to sleep analysis—polysomnography (PSG)—is intrusive and expensive. Therefore, there is great interest in the development of non-contact, non-invasive, and non-intrusive sleep monitoring systems and technologies that can reliably and accurately measure cardiorespiratory parameters with minimal impact on the patient. This has led to the development of other relevant approaches, which are characterised, for example, by the fact that they allow greater freedom of movement and do not require direct contact with the body, i.e., they are non-contact. This systematic review discusses the relevant methods and technologies for non-contact monitoring of cardiorespiratory activity during sleep. Taking into account the current state of the art in non-intrusive technologies, we can identify the methods of non-intrusive monitoring of cardiac and respiratory activity, the technologies and types of sensors used, and the possible physiological parameters available for analysis. To do this, we conducted a literature review and summarised current research on the use of non-contact technologies for non-intrusive monitoring of cardiac and respiratory activity. The inclusion and exclusion criteria for the selection of publications were established prior to the start of the search. Publications were assessed using one main question and several specific questions. We obtained 3774 unique articles from four literature databases (Web of Science, IEEE Xplore, PubMed, and Scopus) and checked them for relevance, resulting in 54 articles that were analysed in a structured way using terminology. The result was 15 different types of sensors and devices (e.g., radar, temperature sensors, motion sensors, cameras) that can be installed in hospital wards and departments or in the environment. The ability to detect heart rate, respiratory rate, and sleep disorders such as apnoea was among the characteristics examined to investigate the overall effectiveness of the systems and technologies considered for cardiorespiratory monitoring. In addition, the advantages and disadvantages of the considered systems and technologies were identified by answering the identified research questions. The results obtained allow us to determine the current trends and the vector of development of medical technologies in sleep medicine for future researchers and research.
Flame-retardant finishing of cotton fabrics using DOPO functionalized alkoxy- and amido alkoxysilane
(2023)
In the present study, DOPO-based alkoxysilane (DOPO-ETES) and amido alkoxysilane (DOPO-AmdPTES) were synthesized by one-step and without by-products as halogen-free flame retardants. The flame retardants were applied on cotton fabric utilizing sol–gel method and pad-dry-cure finishing process. The flame retardancy, the thermal stability and the combustion ehaviour of treated cotton were evaluated by surface and bottom edge ignition flame test (according to EN ISO 15025), thermogravimetric analysis (TGA) and micro-scale combustion calorimeter (MCC). Unlike CO/DOPO-ETES sample, cotton treated with DOPO-AmdPTES nanosols exhibits self-extinguishing ehaviour with high char residue, an improvement of the LOI value and a significant reduction of the PHRR, HRC and THR compared to pristine cotton. Cotton finished with DOPO-AmdPTES reveals a semi-durability after ten laundering cycles keeping the flame-retardant properties unchanged. According to the results obtained from TGA-FTIR, Py-GC/MS and XPS, the major activity of flame retardant occurs in the condensed phase via catalytic induced char formation as physical barrier along with the activity in the gas phase derived mainly from the dilution effect. The early degradation of CO/DOPO-AmdPTES compared to CO/DOPO-ETES, triggered by the cleavage of the weak bond between P and C=O, as the DFT study indicated, provides the beneficial effect of this flame retardant on the fire resistance of cellulose.
Purpose
Job advertisements are important means of communicating role expectations for management accountants to the labor market. They provide information about which roles are sought and expected. However, which roles are communicated in job advertisements is unknown so far.
Design/methodology/approach
With a text-mining approach on a large sample of 889 job ads, the authors extract information on roles, type of firm and hierarchical position of the management accountant sought.
Findings
The results indicate an apparent mix of different role types with a strong focus on a classic watchdog role. However, the business partner role is more often sought for leadership positions or in family businesses and small- and medium-sized enterprises (SME).
Research limitations/implications
The main limitation is the lack of an agreed-upon measurement instrument for roles in job offers. The study results imply that corporate practice is not as theory-driven as is postulated and communicated in the management accounting community. This indicates the existence of a research-practice gap and tensions between different actors in the management accounting field.
Practical implications
The results challenge the current role discussion of professional organizations for management accountants as business partners.
Originality/value
The authors contribute the first study, which explicitly analyzes the communication of roles in job offers for management accountants. It indicates a discrepancy between scholarly discussion on roles and management accountants' work from an employer's perspective.
Artificial intelligence (AI) is one of the most promising technologies of the post-pandemic era. Cloud computing technology can simplify the process of developing AI applications by offering a variety of services, including ready-to-use tools to train machine learning (ML) algorithms. However, comparing the vast amount of services offered by different providers and selecting a suitable cloud service can be a major challenge for many firms. Also in academia, suitable criteria to evaluate this type of service remain largely unclear. Therefore, the overall aim of this work has been to develop a framework to evaluate cloud-based ML services. We use Design Science Research as our methodology and conduct a hermeneutic literature review, a vendor analysis, as well as, expert interviews. Based on our research, we present a novel framework for the evaluation of cloud-based ML services consisting of six categories and 22 criteria that are operationalized with the help of various metrics. We believe that our results will help organizations by providing specific guidance on how to compare and select service providers from the vast amount of potential suppliers.
Towards a sustainable future, looking beyond the system boundaries of a single manufacturing company is necessary to promote meaningful collaborations in terms of circular economy principles. In this context digital data processing technologies to connect the potential collaborators are seen as enablers to make use of proven collaborative circular business models (CCBMs). Since most of such data processing technologies rely on features to describe the entities involved, it is essential to provide guidance for identifying and selecting the relevant and most appropriate ones. Defining critical success factors (CSFs) is considered a suitable instrument to describe the decisive factors. A systematic literature review (SLR), followed by a qualitative synthesis is investigating two scientific fields of work, namely (1) the general relevant features of CCBMs and, (2) methodologies for determining CSFs. This results in the development of a conceptual framework which provides guidance for digital applications that perform further digital processing based on the relevant CSFs relating to the specific CCBM.
Analog integrated circuit sizing is notoriously difficult to automate due to its complexity and scale; thus, it continues to heavily rely on human expert knowledge. This work presents a machine learning-based design automation methodology comprising pre-defined building blocks such as current mirrors or differential pairs and pre-computed look-up tables for electrical characteristics of primitive devices. Modeling the behavior of primitive devices around the operating point with neural networks combines the speed of equation-based methods with the accuracy of simulation-based approaches and, thereby, brings quality of life improvements for analog circuit designers using the gm/Id method. Extending this procedural automation method for human design experts, we present a fully autonomous sizing approach. Related work shows that the convergence properties of conventional optimization approaches improve significantly when acting in the electrical domain instead of the geometrical domain. We, therefore, formulate the circuit sizing task as a sequential decision-making problem in the alternative electrical design space. Our automation approach is based entirely on reinforcement learning, whereby abstract agents learn efficient design space navigation through interaction and without expert guidance. These agents’ learning behavior and performance are evaluated on circuits of varying complexity and different technologies, showing both the feasibility and portability of the work presented here.
Condition monitoring supported with artificial intelligence, cloud computing, and industrial internet of things (IIoT) technologies increases the feasibility of predictive maintenance. However, the cost of traditional sensors, data acquisition systems, and the required information technology expert-knowledge challenge the industry. This paper presents a hybrid condition monitoring system (CMS) architecture consisting of a distributed, low-cost IIoT-sensor solution. The CMS uses micro-electro-mechanical system (MEMS) microphones for data acquisition, edge computing for signal preprocessing, and cloud computing, including artificial neural networks (ANN) for higher-level information processing. The system's feasibility is validated using a testbed for reciprocating linear-motion axes.
Machine failures’ consequences – a classification model considering ultra-efficiency criteria
(2023)
To strive for a sustainable production, maintenance has to evaluate possible machine failure consequences not just economically but also holistically. Approaches such as the ultra-efficiency factory consider energy, material, human/staff, emission, and organization as optimization dimensions. These ultra-efficiency dimensions can be considered for analyzing not only the respective machine failure but also the effects on the entire production system holistically. This paper presents an easy to use method, based on a questionnaire, for assessing the failure consequences of a machine malfunction in a production system considering the ultra-efficiency dimensions. The method was validated in a battery production.
Using predictive maintenance, more efficient processes can be implemented, leading to fewer maintenance costs and increased availability. The development of a predictive maintenance solution currently requires high efforts in time and capacity as well as often interdisciplinary cooperation. This paper presents a standardized model to describe a predictive maintenance use case. The description model is used to collect, present, and document the required information for the implementation of predictive maintenance use cases by and for different stakeholders. Based on this model, predictive maintenance solutions can be introduced more efficiently. The method is validated across departments in the automotive sector.
The increasing complexity and need for availability of automated guided vehicles (AGVs) pose challenges to companies, leading to a focus on new maintenance strategies. In this paper, a smart maintenance architecture based on a digital twin is presented to optimize the technical and economic effectiveness of AGV maintenance activities. To realize this, a literature review was conducted to identify the necessary requirements for Smart Maintenance and Digital Twins. The identified requirements were combined into modules and then integrated into an architecture. The architecture was evaluated on a real AGV on the battery as one of the critical components.
Sleep is extremely important for physical and mental health. Although polysomnography is an established approach in sleep analysis, it is quite intrusive and expensive. Consequently, developing a non-invasive and non-intrusive home sleep monitoring system with minimal influence on patients, that can reliably and accurately measure cardiorespiratory parameters, is of great interest. The aim of this study is to validate a non-invasive and unobtrusive cardiorespiratory parameter monitoring system based on an accelerometer sensor. This system includes a special holder to install the system under the bed mattress. The additional aim is to determine the optimum relative system position (in relation to the subject) at which the most accurate and precise values of measured parameters could be achieved. The data were collected from 23 subjects (13 males and 10 females). The obtained ballistocardiogram signal was sequentially processed using a sixth-order Butterworth bandpass filter and a moving average filter. As a result, an average error (compared to reference values) of 2.24 beats per minute for heart rate and 1.52 breaths per minute for respiratory rate was achieved, regardless of the subject’s sleep position. For males and females, the errors were 2.28 bpm and 2.19 bpm for heart rate and 1.41 rpm and 1.30 rpm for respiratory rate. We determined that placing the sensor and system at chest level is the preferred configuration for cardiorespiratory measurement. Further studies of the system’s performance in larger groups of subjects are required, despite the promising results of the current tests in healthy subjects.
Herein, biochar from biomass residues is demonstrated as active materials for the catalytic cracking of waste motor oil into diesel-like fuels. Above all, alkali-treated rice husk biochar showed great activity with a 250% increase in the kinetic constant compared to the thermal cracking. It also showed better activity than synthetic materials, as previously reported. Moreover, much lower activation energy (185.77 to 293.48 kJ/mol) for the cracking process was also obtained. According to materials characterization, the catalytic activity was more related to the nature of the biochar’s surface than its specific surface area. Finally, liquid products complied with all the physical properties defined by international standards for diesel-like fuels, with the presence of hydrocarbons chains between C10 - C27 similar to the ones obtained in commercial diesel.
In 2015, the United Nations adopted the Sustainable Development Goals (SDGs), a collection of 17 global objectives to promote economic, social and ecological development in all parts of the world. While the academic discussion on the contribution of companies to the Sustainable Development Goals has recently gained momentum, the role of business-to-business (B2B) partnerships in reaching the SDGs is underexplored, particularly when it comes to North-South relationships. With our research, we aim to fill this gap in the literature by investigating sales partnerships between German manufacturers and their distributors in African markets. Based on a qualitative analysis of 28 interviews with managers of German and African companies, we show that long-term partnerships and job creation, technology transfer, training as well as high standards are significant contributions of companies to achieve the SDGs. While several SDGs such as goals 4,6,13,16 and 17 are addressed by B2B partnership, we also discuss approaches on how the firms’ engagement could be further leveraged and expanded.
The pH value of the human skin is not in the neutral range but is slightly acidic with values of – depending on the body part – 3.5 to 6. This provides a suitable habitat for the commensal skin floral but has a killing effect on some pathogenic micro-organisms and an inactivating effect on some viruses. This protective acid mantle of the skin thus represents a first external protective layer against infestation by pathogens. An appropriate surface pH on textiles can help to minimize the transmission of pathogens through the clothing of healthcare workers while at the same time not exerting a negative influence on the skin’s own flora. In addition, the colonization of e.g. bed linen by pathogenic microorganisms can be reduced. This can also have a positive influence on bacteria-associated odor formation on functional clothing.
This study examines the phenomenon of Virtual Influencer (VI) marketing and its impact on customer purchase behavior. The aim is to understand the scope and impact of VI marketing. The study compares VI marketing to traditional Human Influencer (HI) marketing and identifies the unique benefits and challenges associated with VIs. A survey was conducted to gain insight into consumer attitudes and behaviors toward VIs. Key findings reveal varying levels of trust and acceptance of VIs among consumers. While some participants expressed openness to buying products promoted by VIs, others had reservations about their authenticity. The study also explores the potential role of VIs in the metaverse, highlighting business opportunities and challenges in this evolving digital landscape. Overall, this research sheds light on the growing influence of VIs and the need for further research in the field of marketing.
This study examines the underexplored areas of customer success management, focusing on the impact of leadership and companywide collaboration, and the role of customer success in overall firm performance. A qualitative research approach was utilized, which involved reviewing relevant literature and conducting an interview with the Vice President of Customer Success Management in B2B at a case company. Findings revealed that both leadership and pervasive collaboration greatly enhance the customer journey experience. Given that 75% of Annual Recurring Revenue is derived from existing customers, the substantial role of customer success in propelling business growth is affirmed. The study also demonstrated the importance of proactive customer engagement, assimilating customer feedback into products and services, and nurturing personal relationships with customers for fostering innovation. It further stressed the need for service provision and decision-making at various levels, as well as the implementation of a range of communication channels, to ensure customer success.
This paper presents the first part of a research-work conducted at the University of Applied Sciences (HFT- Stuttgart). The aim of the research was to investigate the potential of low-cost renewable energy systems to reduce the energy demand of the building sector in hot and dry areas. Radiative cooling to the night sky represents a low-cost renewable energy source. The dry desert climate conditions promote radiative cooling applications. The system technology adopted in this work is based on uncovered solar thermal collectors integrated into the building’s hydronic system. By implementing different control strategies, the same system could be used for cooling as well as for heating applications. This paper focuses on identifying the collector parameters which are required as the coefficients to configure such an unglazed collector for calibrating its mathematical model within the simulation environment. The parameter identification process implies testing the collector for its thermal performance. This paper attempts to provide an insight into the dynamic testing of uncovered solar thermal collectors (absorbers), taking into account their prospective operation at nighttime for radiative cooling applications. In this study, the main parameters characterizing the performance of the absorbers for radiative cooling applications are identified and obtained from standardized testing protocol. For this aim, a number of plastic solar absorbers of different designs were tested on the outdoor test-stand facility at HFT-Stuttgart for the characterization of their thermal performance. The testing process was based on the quasi-dynamic test method of the international standard for solar thermal collectors EN ISO 9806. The test database was then used within a mathematical optimization tool (GenOpt) to determine the optimal parameter settings of each absorber under testing. Those performance parameters were significant to compare the thermal performance of the tested absorbers. The coefficients (identified parameters) were used then to plot the thermal efficiency curves of all absorbers, for both the heating and cooling modes of operation. Based on the intended main scope of the system utilization (heating or cooling), the tested absorbers could be benchmarked. Hence, one of those absorbers was selected to be used in the following simulation phase as was planned in the research-project.
Due to the wide variety of benign and malignant salivary gland tumors, classification and malignant behavior determination based on histomorphological criteria can be difficult and sometimes impossible. Spectroscopical procedures can acquire molecular biological information without destroying the tissue within the measurement processes. Since several tissue preparation procedures exist, our study investigated the impact of these preparations on the chemical composition of healthy and tumorous salivary gland tissue by Fourier-transform infrared (FTIR) microspectroscopy. Sequential tissue cross-sections were prepared from native, formalin-fixed and formalin-fixed paraffin-embedded (FFPE) tissue and analyzed. The FFPE cross-sections were dewaxed and remeasured. By using principal component analysis (PCA) combined with a discriminant analysis (DA), robust models for the distinction of sample preparations were built individually for each parotid tissue type. As a result, the PCA-DA model evaluation showed a high similarity between native and formalin-fixed tissues based on their chemical composition. Thus, formalin-fixed tissues are highly representative of the native samples and facilitate a transfer from scientific laboratory analysis into the clinical routine due to their robust nature. Furthermore, the dewaxing of the cross-sections entails the loss of molecular information. Our study successfully demonstrated how FTIR microspectroscopy can be used as a powerful tool within existing clinical workflows.