Refine
Year of publication
- 2022 (21) (remove)
Document Type
- Conference proceeding (19)
- Journal article (2)
Language
- English (21)
Has full text
- yes (21) (remove)
Is part of the Bibliography
- yes (21)
Institute
- Technik (11)
- Informatik (6)
- ESB Business School (4)
Publisher
- IEEE (21) (remove)
A single-phase fixed-frequency operated power factor correction circuit with reduced switching losses is proposed. The circuit uses the combination of a boost converter with an added clamp-switch, a pulse wave shaping circuit, and a standard control IC to discharge the transistor's output capacitance prior to its turn-on. In this way, a very low-complexity control circuit implementation to reduce switching losses or even achieve complete zero-voltage switching without additional sensors is possible. Moreover, this operation method is achieved at a constant switching frequency, possibly simplifying the design of the EMI filter and the converter's inductor. Experimental test results for a 100 W prototype converter are presented to validate the feasibility of the proposed operating method and corresponding circuit structure.
Providing a digital infrastructure, platform technologies foster interfirm collaboration between loosely coupled companies, enabling the formation of ecosystems and building the organizational structure for value co-creation. Despite the known potential, the development of platform ecosystems creates new sources of complexity and uncertainty due to the involvement of various independent actors. For a platform ecosystem to succeed, it is essential that the platform ecosystem participants are aligned, coordinated, and given a common direction. Traditionally, product roadmaps have served these purposes during product development. A systematic mapping study was conducted to better understand how product roadmapping could be used in the dynamic environment of platform ecosystems. One result of the study is that there are hardly any concrete approaches for product roadmapping in platform ecosystems so far. However, many challenges on the topic are described in the literature from different perspectives. Based on the results of the systematic mapping study, a research agenda for product roadmapping in platform ecosystems is derived and presented.
We propose a novel technique to compensate the effects of R-C / gm-C time-constant (TC) errors due to process variation in continuous-time delta-sigma modulators. Local TC error compensation factors are shifted around in the modulator loop to positions where they can be implemented efficiently with tunable circuit structures, such as current-steering digital-to-analog converters (DAC). This approach constitutes an alternative or supplement to existing compensation techniques, including capacitor or gm tuning. We apply the proposed technique to a third-order, single-bit, low-pass continuous-time delta-sigma modulator in cascaded integrator feedback structure. A feedback path tuning scheme is derived analytically and confirmed numerically using behavioral simulations. The modulator circuit was implemented in a 0.35-μm CMOS process using an active feedback coefficient tuning structure based on current-steering DACs. Post-layout simulations show that with this tuning structure, constant performance and stable operation can be obtained over a wide range of TC variation.
For a long time, most discrete accelerators have been attached to host systems using various generations of the PCI Express interface. However, with its lack of support for coherency between accelerator and host caches, fine-grained interactions require frequent cache-flushes, or even the use of inefficient uncached memory regions. The Cache Coherent Interconnect for Accelerators (CCIX) was the first multi-vendor standard for enabling cache-coherent host-accelerator attachments, and already is indicative of the capabilities of upcoming standards such as Compute Express Link (CXL). In our work, we compare and contrast the use of CCIX with PCIe when interfacing an ARM-based host with two generations of CCIX-enabled FPGAs. We provide both low-level throughput and latency measurements for accesses and address translation, as well as examine an application-level use-case of using CCIX for fine-grained synchronization in an FPGA-accelerated database system. We can show that especially smaller reads from the FPGA to the host can benefit from CCIX by having roughly 33% shorter latency than PCIe. Small writes to the host have a latency roughly 32% higher than PCIe, though, since they carry a higher coherency overhead. For the database use-case, the use of CCIX allowed to maintain a constant synchronization latency even with heavy host-FPGA parallelism.
This paper presents a compact four-arm spiral antenna, which may be used in direction-finding applications but also mobile communication systems. The antenna is fed sequentially at its outside-ends using a sequential phase network embedded in grounded multilayer dielectric media. Sequential rotation is applied to generate the axial mode M1 but also the conical mode M2 in the same frequency band. The antenna exhibits good radiation characteristics in the frequency band of interest.
According to several surveys and statistics, the great majority of companies previously not accustomed to automation are piloting solutions to automate business processes. Those accustomed to automation also attempt to introduce more of it, focusing on automation-unfriendly processes that remained manual. However, when the decision on what and whether to automate is not trivial for evident reasons, even industry leaders may get stuck on an overwhelming question: where to begin automating? The question remains too often unanswered as state-of-the-art methods fail to consider the whole picture. This paper introduces a holistic approach to the decision-making for investments in automation. The method supports the iterative analysis and evaluation of operative processes, providing tools for a quantitative approach to the decision-making. Thanks to the method, a large pool of processes can be first considered and then filtered out in order to select the one that yields the best value for the automation in the specific context. After introducing the method, a case study is reported for validation before the discussion.
The scoring of sleep stages is an essential part of sleep studies. The main objective of this research is to provide an algorithm for the automatic classification of sleep stages using signals that may be obtained in a non-obtrusive way. After reviewing the relevant research, the authors selected a multinomial logistic regression as the basis for their approach. Several parameters were derived from movement and breathing signals, and their combinations were investigated to develop an accurate and stable algorithm. The algorithm was implemented to produce successful results: the accuracy of the recognition of Wake/NREM/REM stages is equal to 73%, with Cohen's kappa of 0.44 for the analyzed 19324 sleep epochs of 30 seconds each. This approach has the advantage of using the only movement and breathing signals, which can be recorded with less effort than heart or brainwave signals, and requiring only four derived parameters for the calculations. Therefore, the new system is a significant improvement for non-obtrusive sleep stage identification compared to existing approaches.
Evaluation of human-robot order picking systems considering the evolution of object detection
(2022)
The automation of intralogistic processes is a major trend, but order picking, one of the core and most cost-intensive tasks in this field, remains mostly manual due to the flexibility required during picking. Reacting to its hard physical and ergonomic strain, the automation of this process is however highly relevant. Robotic picking system would enable the automation of this process from a technical point of view, but the necessity for the system to evolve in time, due to dynamics of logistic environments, faces operations with new challenges that are hardly treated in literature. This unknown scares potential investors, hindering the application of technically feasible solutions. In this paper, a model for the evaluation of the additional cost of training of automated systems during operations is presented, that also considers the savings enabled by the system after its evolution. The proposed approach, that considers different parameters such as capacity, ergonomics and cost, is validated with a case study and discussed.