Ja
Refine
Document Type
- Conference proceeding (274)
- Journal article (122)
- Doctoral Thesis (13)
- Book chapter (11)
- Book (5)
- Working Paper (2)
- Report (1)
Is part of the Bibliography
- yes (428)
Institute
- Informatik (428) (remove)
Publisher
- Hochschule Reutlingen (96)
- Gesellschaft für Informatik e.V (61)
- Elsevier (35)
- IARIA (26)
- Springer (24)
- RWTH Aachen (15)
- De Gruyter (12)
- Deutsche Gesellschaft für Computer- und Roboterassistierte Chirurgie e.V. (10)
- MDPI (10)
- University of Hawai'i at Manoa (8)
This paper presents the first part of a research-work conducted at the University of Applied Sciences (HFT- Stuttgart). The aim of the research was to investigate the potential of low-cost renewable energy systems to reduce the energy demand of the building sector in hot and dry areas. Radiative cooling to the night sky represents a low-cost renewable energy source. The dry desert climate conditions promote radiative cooling applications. The system technology adopted in this work is based on uncovered solar thermal collectors integrated into the building’s hydronic system. By implementing different control strategies, the same system could be used for cooling as well as for heating applications. This paper focuses on identifying the collector parameters which are required as the coefficients to configure such an unglazed collector for calibrating its mathematical model within the simulation environment. The parameter identification process implies testing the collector for its thermal performance. This paper attempts to provide an insight into the dynamic testing of uncovered solar thermal collectors (absorbers), taking into account their prospective operation at nighttime for radiative cooling applications. In this study, the main parameters characterizing the performance of the absorbers for radiative cooling applications are identified and obtained from standardized testing protocol. For this aim, a number of plastic solar absorbers of different designs were tested on the outdoor test-stand facility at HFT-Stuttgart for the characterization of their thermal performance. The testing process was based on the quasi-dynamic test method of the international standard for solar thermal collectors EN ISO 9806. The test database was then used within a mathematical optimization tool (GenOpt) to determine the optimal parameter settings of each absorber under testing. Those performance parameters were significant to compare the thermal performance of the tested absorbers. The coefficients (identified parameters) were used then to plot the thermal efficiency curves of all absorbers, for both the heating and cooling modes of operation. Based on the intended main scope of the system utilization (heating or cooling), the tested absorbers could be benchmarked. Hence, one of those absorbers was selected to be used in the following simulation phase as was planned in the research-project.
During the first years of the last decade, Egypt used to face recurrent electricity cut-offs in summer. In the past few years, the electricity tariff dramatically increased. Radiative cooling to the clear night sky is a renewable energy source that represents a relative solution. The dry desert climate promotes nocturnal radiative cooling applications. This study investigates the potential of nocturnal radiative cooling systems (RCSs) to reduce the energy consumption of the residential building sector in Egypt. The system technology proposed in this work is based on uncovered solar thermal collectors integrated into the building hydronic system. By implementing different control strategies, the same system could be used for both cooling and heating applications. The goal of this paper is to analyze the performance of RCSs in residential buildings in Egypt. The dynamic simulation program TRNSYS was used to simulate the thermal behavior of the system. The relevant issues of Egypt as a case-study are firstly overviewed. Then the paper introduces the work done to develop a building model that represents a typical residential apartment in Egypt. Typical occupancy profiles were developed to define the internal thermal gains. The adopted control strategy to optimize the system operation is presented as well. To fully understand and hence evaluate the operation of the proposed RCS, four simulation cases were considered: 1. a reference case (fully passive), 2. the stand-alone operation of the RCS, 3. ideal heating & cooling operation (fully-active), and 4. the hybrid-operation (when the active cooling system is supported by the proposed RCS). The analysis considered the main three distinct climates in Egypt, represented by the cities of Alexandria, Cairo and Asyut. The hotter and drier weather conditions resulted in a higher cooling potential and larger temperature differences. The simulated cooling power in Asyut was 28.4 W/m² for a 70 m² absorber field. For a smaller field area of 10 m², the cooling power reached 109 W/m² but with humble temperature differences. To meet the rigorous thermal comfort conditions, the proposed sensible RCS cannot fully replace conventional air-conditioning units, especially in humid areas like Alexandria. When working in a hybrid system, a 10% reduction in the active cooling energy demand could be achieved in Asyut to keep the cooling set-point at 24 °C. This percentage reduction was nearly doubled when the thermal comfort set-point was increased by two degrees (26 °C). In a sensitivity analysis, external shading devices as a passive measure as well as the implementation of the Egyptian code for buildings (ECP306/1–2005) were also investigated. The analysis of this study raised other relevant aspects to discuss, e.g. system-sizing, environmental effects, limitations and recommendations.
With the expansion of cyber-physical systems (CPSs) across critical and regulated industries, systems must be continuously updated to remain resilient. At the same time, they should be extremely secure and safe to operate and use. The DevOps approach caters to business demands of more speed and smartness in production, but it is extremely challenging to implement DevOps due to the complexity of critical CPSs and requirements from regulatory authorities. In this study, expert opinions from 33 European companies expose the gap in the current state of practice on DevOps-oriented continuous development and maintenance. The study contributes to research and practice by identifying a set of needs. Subsequently, the authors propose a novel approach called Secure DevOps and provide several avenues for further research and development in this area. The study shows that, because security is a cross-cutting property in complex CPSs, its proficient management requires system-wide competencies and capabilities across the CPSs development and operation.
This study is about estimating the reproducibility of finding palpation points of three different anatomical landmarks in the human body (Xiphoid Process and the 2 Hip Crests) to support a navigated ultrasound application. On 6 test subjects with different body mass index the three palpation points were located five times by two examiners. The deviation from the target position was calculated and correlated to the fat thickness above each palpation point. The reproducibility of the measurements had a mean error of ≈13.5 mm +- 4 mm, which seems to be sufficient for the desired application field.
Das Ziel dieser Arbeit war die Umsetzung eines Wahrnehmungsensors für Softwareagenten, die über ein virtuelles Menschmodell in einer dreidimensionalen Umgebung agieren. Hierbei sollen die Agenten über den Sensor in der Lage sein, semantische Informationen zu geometrischen Objekten in der Umgebung zu erhalten. Hierfür wurden zwei Verfahren umgesetzt, die das menschliche Sehen simulieren, indem Objekte erkannt werden, wenn diese innerhalb eines Sichtfelds liegen. Ein Problem, das dabei gelöst werden muss, ist die Identifizierung möglicher Verdeckungen der Objekte. Ein Ansatz, dieses Problem zu lösen, ist der Ray-Tracing Ansatz, welcher für das erste Verfahren umgesetzt wurde. Das zweite Verfahren verwendet den Occlusion-Culling Ansatz. Auswertungen beider Verfahren haben gezeigt, dass der Ray-Tracing Ansatz eine schnellere Laufzeit aufweist, der Occlusion-Culling Ansatz jedoch mehr unverdeckte Objekte im Sichtfeld erkennt.
Nowadays, the importance of early active patient mobilization in the recovery and rehabilitation phase has increased significantly. One way to involve patients in the treatment is a gamification-like approach, which is one of the methods of motivation in various life processes. This article shows a system prototype for patients who require physical activity because of active early mobilization after medical interventions or during illness. Bedridden patients and people with a sedentary lifestyle (predominantly lying in bed) are also potential users. The main idea for the concept was non-contact system implementation for the patients making them feel effortless during its usage. The system consists of three related parts: hardware, software, and game application. To test the relevance and coherence of the system, it was used by 35 people. The participants were asked to play a video game requiring them to make body movements while lying down. Then they were asked to take part in a small survey to evaluate the system's usability. As a result, we offer a prototype consisting of hardware and software parts that can increase and diversify physical activity during active early mobilization of patients and prevent the occurrence of possible health problems due to predominantly low activity. The proposed design can be possibly implemented in hospitals, rehabilitation centers, and even at home.
Monitoring heart rate and breathing is essential in understanding the physiological processes for sleep analysis. Polysomnography (PSG) system have traditionally been used for sleep monitoring, but alternative methods can help to make sleep monitoring more portable in someone's home. This study conducted a series of experiments to investigate the use of pressure sensors placed under the bed as an alternative to PSG for monitoring heart rate and breathing during sleep. The following sets of experiments involved the addition of small rubber domes - transparent and black - that were glued to the pressure sensor. The resulting data were compared with the PSG system to determine the accuracy of the pressure sensor readings. The study found that the pressure sensor provided reliable data for extracting heart rate and respiration rate, with mean absolute errors (MAE) of 2.32 and 3.24 for respiration and heart rate, respectively. However, the addition of small rubber hemispheres did not significantly improve the accuracy of the readings, with MAEs of 2.3 bpm and 7.56 breaths per minute for respiration rate and heart rate, respectively. The findings of this study suggest that pressure sensors placed under the bed may serve as a viable alternative to traditional PSG systems for monitoring heart rate and breathing during sleep. These sensors provide a more comfortable and non-invasive method of sleep monitoring. However, the addition of small rubber domes did not significantly enhance the accuracy of the readings, indicating that it may not be a worthwhile addition to the pressure sensor system.
Sleep analysis using a Polysomnography system is difficult and expensive. That is why we suggest a non-invasive and unobtrusive measurement. Very few people want the cables or devices attached to their bodies during sleep. The proposed approach is to implement a monitoring system, so the subject is not bothered. As a result, the idea is a non-invasive monitoring system based on detecting pressure distribution. This system should be able to measure the pressure differences that occur during a single heartbeat and during breathing through the mattress. The system consists of two blocks signal acquisition and signal processing. This whole technology should be economical to be affordable enough for every user. As a result, preprocessed data is obtained for further detailed analysis using different filters for heartbeat and respiration detection. In the initial stage of filtration, Butterworth filters are used.
With the progress of technology in modern hospitals, an intelligent perioperative situation recognition will gain more relevance due to its potential to substantially improve surgical workflows by providing situation knowledge in real-time. Such knowledge can be extracted from image data by machine learning techniques but poses a privacy threat to the staff’s and patients’ personal data. De-identification is a possible solution for removing visual sensitive information. In this work, we developed a YOLO v3 based prototype to detect sensitive areas in the image in real-time. These are then deidentified using common image obfuscation techniques. Our approach shows that it is principle suitable for de-identifying sensitive data in OR images and contributes to a privacyrespectful way of processing in the context of situation recognition in the OR.
In this paper, we propose a radical new approach for scale-out distributed DBMSs. Instead of hard-baking an architectural model, such as a shared-nothing architecture, into the distributed DBMS design, we aim for a new class of so-called architecture-less DBMSs. The main idea is that an architecture-less DBMS can mimic any architecture on a per-query basis on-the-fly without any additional overhead for reconfiguration. Our initial results show that our architecture-less DBMS AnyDB can provide significant speedup across varying workloads compared to a traditional DBMS implementing a static architecture.
In our initial DaMoN paper, we set out the goal to revisit the results of “Starring into the Abyss [...] of Concurrency Control with [1000] Cores” (Yu in Proc. VLDB Endow 8: 209-220, 2014). Against their assumption, today we do not see single-socket CPUs with 1000 cores. Instead, multi-socket hardware is prevalent today and in fact offers over 1000 cores. Hence, we evaluated concurrency control (CC) schemes on a real (Intel-based) multi-socket platform. To our surprise, we made interesting findings opposing results of the original analysis that we discussed in our initial DaMoN paper. In this paper, we further broaden our analysis, detailing the effect of hardware and workload characteristics via additional real hardware platforms (IBM Power8 and 9) and the full TPC-C transaction mix. Among others, we identified clear connections between the performance of the CC schemes and hardware characteristics, especially concerning NUMA and CPU cache. Overall, we conclude that no CC scheme can efficiently make use of large multi-socket hardware in a robust manner and suggest several directions on how CC schemes and overall OLTP DBMS should evolve in future.
Development work within an experimental environment, in which certain properties are investigated and optimized, requires many test runs and is therefore often associated with long execution times, costs and risks. This can affect product, material and technology development in industry and research. New digital driver technologies offer the possibility to automate complex manual work steps in a cost-effective way, to increase the relevance of the results and to accelerate the processes many times over. In this context, this article presents a low-cost, modular and open-source machine vision system for test execution and evaluates it on the basis of a real industrial application. For this purpose a methodology for the automated execution of the load intervals, the process documentation and for the evaluation of the generated data by means of machine learning to classify wear levels. The software and the mechanical structure are designed to be adaptable to different conditions, components and for a variety of tasks in industry and research. The mechanical structure is required for tracking the test object and represents a motion platform with independent positioning by machine vision operators or machine learning. An evaluation of the state of the test object is performed by the transfer learning after the initial documentation run. The manual procedure for classifying the visually recorded data on the state of the test object is described for the training material. This leads to an increased resource efficiency on the material as well as on the personnel side since on the one hand the significance of the tests performed is increased by the continuous documentation and on the other hand the responsible experts can be assigned time efficiently. The presence and know-how of the experts are therefore only required for defined and decisive events during the execution of the experiments. Furthermore, the generated data are suitable for later use as an additional source of data for predictive maintenance of the developed object.
The blockchain technology enables a common data basis between the participants. Entries are logged and the authenticity of the participants is guaranteed. In the case of a relationship between customers and producers, this would lead to verifiable cooperation, which would be a major step as companies enter into service contracts based on the flow of many small transactions through communication. This paper proposes an architecture that enables the creation and processing of orders between the customer and producers via a blockchain based production network. The handling of larger files which are traceable via the blockchain is also shown and the use of a public or permissioned blockchain for an application case is also considered.
The use of additive manufacturing technologies for industrial production is constantly growing. This technology differs from the known production proecdures. The areas for scheduling, detailed and sequence planning are particularly important for additive production due to the long print times and flexible use of the production area. Therefore, production-relevant variables are considered and used for the production planning and control (PPC) of additive manufacturing machines. For this purpose, an optimization model is presented which shows a time-oriented build space utilization. In the implementation, a nesting algorithm is used to check the combinability of different models for each individual print job.
The promise of immutable documents to make it easier and less expensive for consumers and producers to collaborate in a verifiable way would represent an enormous progress, especially as companies strive for establish service contracts which are based on the flow of many small transactions using machine-to-machine communication. The blockchain technology logs these data, verifies the authenticity and make them available for service offers. This work deals with an architecture enabling to setup order processing between consumers and produceers using blockchain. In this way, the technical feasibility is shown and the special characteristics of blockchain production networks will be discussed.
Sowohl bei den industriellen als auch wissenschaftlichen Institutionen nimmt die Anwendung der additiven Fertigung stetig zu und ist insbesondere in den Bereichen der Prototypenentwicklung nicht mehr wegzudenken. Die werkzeuglose Herstellung von Teilen ermöglicht eine dynamische Nutzung der Produktionsressourcen bis unmittelbar zum Fertigungsstart. Dies erlaubt, einerseits in den Bereichen der Feinterminierung und Ablaufplanung, agil auf Veränderungen zu reagieren und andererseits Modelle unterschiedlicher Fertigungsaufträge miteinander zu kombinieren, um somit eine hohe Effizienz der Fertigungsanlagen zu erreichen. Bei der Nutzung von multiplen Anlagen in einem Unternehmen oder im Partnerverbund stellt die vorhandene Intransparenz Unternehmen und Unternehmensnetzwerke vor viele Herausforderungen. Die Blockchain Technologie ermöglicht eine gemeinsame Datenbasis zwischen den Teilnehmern. Die Einträge werden protokolliert und die Authentizität der Teilnehmer wird gewährleistet. Dies führt, im Falle der Beziehung zwischen Kunden und Produzenten, zu einer nachprüfbaren Zusammenarbeit, da Unternehmen Dienstleistungsverträge abschließen, die auf dem Fluss vieler kleiner Transaktionen basieren. In diesem Beitrag wird dargestellt, wie verfügbare additive Fertigungsressourcen erkannt werden, sowie, unter der Verwendung der Blockchain-Technologie, in einem dezentralen Produktionsnetzwerk angeboten und von unterschiedlichen Akteuren genutzt werden können.
Even though near-data processing (NDP) can provably reduce data transfers and increase performance, current NDP is solely utilized in read-only settings. Slow or tedious to implement synchronization and invalidation mechanisms between host and smart storage make NDP support for data-intensive update operations difficult. In this paper, we introduce a low-latency cache-coherent shared lock table for update NDP settings in disaggregated memory environments. It utilizes the novel CCIX interconnect technology and is integrated in neoDBMS, a near-data processing DBMS for smart storage. Our evaluation indicates end-to-end lock latencies of ∼80-100ns and robust performance under contention.
The Internet of Things (IoT) refers to the interconnectedness of physical objects, and works by equipping the latter with sensors and actuators as a means to connect to the internet. The number of connected things has increased threefold over the past five years. Consequently, firms expect the IoT to become a source of new business models driven by technology. However, only a few early adopters have started to install and use IoT appliances on a frequent basis. So it is still unclear which factors drive technological acceptance of IoT appliances. Confronting this gap in current research, the present paper explores how IoT appliances are conceptually defined, which factors drive technological acceptance of IoT appliances, and how firms can use results in order to improve value propositions in corresponding business models. lt is discovered that IoT appliance vendors need to support a broad focus as the potential buyers expose a large variety. As conclusions from this insight, the paper illustrates some flexible marketing strategies.
The evaluation of the effectiveness of different machine learning algorithms on a publicly available database of signals derived from wearable devices is presented with the goal of optimizing human activity recognition and classification. Among the wide number of body signals we choose a couple of signals, namely photoplethysmographic (optically detected subcutaneous blood volume) and tri-axis acceleration signals that are easy to be simultaneously acquired using commercial widespread devices (e.g. smartwatches) as well as custom wearable wireless devices designed for sport, healthcare, or clinical purposes. To this end, two widely used algorithms (decision tree and k-nearest neighbor) were tested, and their performance were compared to two new recent algorithms (particle Bernstein and a Monte Carlo-based regression) both in terms of accuracy and processing time. A data preprocessing phase was also considered to improve the performance of the machine learning procedures, in order to reduce the problem size and a detailed analysis of the compression strategy and results is also presented.
This paper investigates the possibility to effectively monitor and control the respiratory action using a very simple and non invasive technique based on a single lightweight reduced-size wireless surface electromyography (sEMG) sensor placed below the sternum. The captured sEMG signal, due to the critical sensor position, is characterized by a low energy level and it is affected by motion artifacts and cardiac noise. In this work we present a preliminary study performed on adults for assessing the correlation of the spirometry signal and the sEMG signal after the removal of the superimposed heart signal. This study and the related findings could be useful in respiratory monitoring of preterm infants.
Smart meter based business models for the electricity sector : a systematical literature research
(2017)
The Act on the Digitization of the Energy Transition forces German industries and households to introduce smart meters in order to save engery, to gain individual based electricity tariffs and to digitize the energy data flow. Smart meter can be regarded as the advancement of the traditional meter. Utilizing this new technology enables a wide range of innovative business models that provide additional value for the electricity suppliers as well as for their customers. In this study, we followed a two-step approach. At first, we provide a state-of-the-art comparison of these business models found in the literature and identify structural differences in the way they add value to the offered products and services. Secondly, the business models are grouped into categories with respect to customer segmetns and the added value to the smart grid. Findings indicate that most business models focus on the end-costumer as their main customer.
Context: Fast moving markets and the age of digitization require that software can be quickly changed or extended with new features. The associated quality attribute is referred to as evolvability: the degree of effectiveness and efficiency with which a system can be adapted or extended. Evolvability is especially important for software with frequently changing requirements, e.g. internet-based systems. Several evolvability-related benefits were arguably gained with the rise of service-oriented computing (SOC) that established itself as one of the most important paradigms for distributed systems over the last decade. The implementation of enterprise-wide software landscapes in the style of service-oriented architecture (SOA) prioritizes loose coupling, encapsulation, interoperability, composition, and reuse. In recent years, microservices quickly gained in popularity as an agile, DevOps-focused, and decentralized service-oriented variant with fine-grained services. A key idea here is that small and loosely coupled services that are independently deployable should be easy to change and to replace. Moreover, one of the postulated microservices characteristics is evolutionary design.
Problem Statement: While these properties provide a favorable theoretical basis for evolvable systems, they offer no concrete and universally applicable solutions. As with each architectural style, the implementation of a concrete microservice-based system can be of arbitrary quality. Several studies also report that software professionals trust in the foundational maintainability of service orientation and microservices in particular. A blind belief in these qualities without appropriate evolvability assurance can lead to violations of important principles and therefore negatively impact software evolution. In addition to this, very little scientific research has covered the areas of maintenance, evolution, or technical debt of microservices.
Objectives: To address this, the aim of this research is to support developers of microservices with appropriate methods, techniques, and tools to evaluate or improve evolvability and to facilitate sustainable long-term development. In particular, we want to provide recommendations and tool support for metric-based as well as scenario-based evaluation. In the context of service-based evolvability, we furthermore want to analyze the effectiveness of patterns and collect relevant antipatterns. Methods: Using empirical methods, we analyzed the industry state of the practice and the academic state of the art, which helped us to identify existing techniques, challenges, and research gaps. Based on these findings, we then designed new evolvability assurance techniques and used additional empirical studies to demonstrate and evaluate their effectiveness. Applied empirical methods were for example surveys, interviews, (systematic) literature studies, or controlled experiments.
Contributions: In addition to our analyses of industry practice and scientific literature, we provide contributions in three different areas. With respect to metric-based evolvability evaluation, we identified a set of structural metrics specifically designed for service orientation and analyzed their value for microservices. Subsequently, we designed tool-supported approaches to automatically gather a subset of these metrics from machine-readable RESTful API descriptions and via a distributed tracing mechanism at runtime. In the area of scenario-based evaluation, we developed a tool-supported lightweight method to analyze the evolvability of a service-based system based on hypothetical evolution scenarios. We evaluated the method with a survey (N=40) as well as hands-on interviews (N=7) and improved it further based on the findings. Lastly with respect to patterns and antipatterns, we collected a large set of service-based patterns and analyzed their applicability for microservices. From this initial catalogue, we synthesized a set of candidate evolvability patterns via the proxy of architectural modifiability tactics. The impact of four of these patterns on evolvability was then empirically tested in a controlled experiment (N=69) and with a metric-based analysis. The results suggest that the additional structural complexity introduced by the patterns as well as developers' pattern knowledge have an influence on their effectiveness. As a last contribution, we created a holistic collection of service-based antipatterns for both SOA and microservices and published it in a collaborative repository.
Conclusion: Our contributions provide first foundations for a holistic view on the evolvability assurance of microservices and address several perspectives. Metric- and scenario-based evaluation as well as service-based antipatterns can be used to identify "hot spots" while service-based patterns can remediate them and provide means for systematic evolvability construction. All in all, researchers and practitioners in the field of microservices can use our artifacts to analyze and improve the evolvability of their systems as well as to gain a conceptual understanding of service-based evolvability assurance.
While there are several theoretical comparisons of Object Orientation (OO) and Service Orientation (SO), little empirical research on the maintainability of the two paradigms exists. To provide support for a generalizable comparison, we conducted a study with four related parts. Two functionally equivalent systems (one OO and one SO version) were analyzed with coupling and cohesion metrics as well as via a controlled experiment, where participants had to extend the systems. We also conducted a survey with 32 software professionals and interviewed 8 industry experts on the topic. Results indicate that the SO version of our system possesses a higher degree of cohesion, a lower degree of coupling, and could be extended faster. Survey and interview results suggest that industry sees systems built with SO as more loosely coupled, modifiable, and reusable. OO systems, however, were described as less complex and easier to test.
Context
Microservices as a lightweight and decentralized architectural style with fine-grained services promise several beneficial characteristics for sustainable long-term software evolution. Success stories from early adopters like Netflix, Amazon, or Spotify have demonstrated that it is possible to achieve a high degree of flexibility and evolvability with these systems. However, the described advantageous characteristics offer no concrete guidance and little is known about evolvability assurance processes for microservices in industry as well as challenges in this area. Insights into the current state of practice are a very important prerequisite for relevant research in this field.
Objective
We therefore wanted to explore how practitioners structure the evolvability assurance processes for microservices, what tools, metrics, and patterns they use, and what challenges they perceive for the evolvability of their systems.
Method
We first conducted 17 semi-structured interviews and discussed 14 different microservice-based systems and their assurance processes with software professionals from 10 companies. Afterwards, we performed a systematic grey literature review (GLR) and used the created interview coding system to analyze 295 practitioner online resources.
Results
The combined analysis revealed the importance of finding a sensible balance between decentralization and standardization. Guidelines like architectural principles were seen as valuable to ensure a base consistency for evolvability and specialized test automation was a prevalent theme. Source code quality was the primary target for the usage of tools and metrics for our interview participants, while testing tools and productivity metrics were the focus of our GLR resources. In both studies, practitioners did not mention architectural or service-oriented tools and metrics, even though the most crucial challenges like Service Cutting or Microservices Integration were of an architectural nature.
Conclusions
Practitioners relied on guidelines, standardization, or patterns like Event-Driven Messaging to partially address some reported evolvability challenges. However, specialized techniques, tools, and metrics are needed to support industry with the continuous evaluation of service granularity and dependencies. Future microservices research in the areas of maintenance, evolution, and technical debt should take our findings and the reported industry sentiments into account.
Context
Web APIs are one of the most used ways to expose application functionality on the Web, and their understandability is important for efficiently using the provided resources. While many API design rules exist, empirical evidence for the effectiveness of most rules is lacking.
Objective
We therefore wanted to study 1) the impact of RESTful API design rules on understandability, 2) if rule violations are also perceived as more difficult to understand, and 3) if demographic attributes like REST-related experience have an influence on this.
Method
We conducted a controlled Web-based experiment with 105 participants, from both industry and academia and with different levels of experience. Based on a hybrid between a crossover and a between-subjects design, we studied 12 design rules using API snippets in two complementary versions: one that adhered to a rule and one that was a violation of this rule. Participants answered comprehension questions and rated the perceived difficulty.
Results
For 11 of the 12 rules, we found that violation performed significantly worse than rule for the comprehension tasks. Regarding the subjective ratings, we found significant differences for 9 of the 12 rules, meaning that most violations were subjectively rated as more difficult to understand. Demographics played no role in the comprehension performance for violation.
Conclusions
Our results provide first empirical evidence for the importance of following design rules to improve the understandability of Web APIs, which is important for researchers, practitioners, and educators.
Background: Design patterns are supposed to improve various quality attributes of software systems. However, there is controversial quantitative evidence of this impact. Especially for younger paradigms such as service- and microservice-based systems, there is a lack of empirical studies.
Objective: In this study, we focused on the effect of four service-based patterns - namely process abstraction, service façade, decomposed capability, and event-driven messaging - on the evolvability of a system from the viewpoint of inexperienced developers.
Method: We conducted a controlled experiment with Bachelor students (N = 69). Two functionally equivalent versions of a service-based web shop - one with patterns (treatment group), one without (control group) - had to be changed and extended in three tasks. We measured evolvability by the effectiveness and efficiency of the participants in these tasks. Additionally, we compared both system versions with nine structural maintainability metrics for size, granularity, complexity, cohesion, and coupling.
Results: Both experiment groups were able to complete a similar number of tasks within the allowed 90 min. Median effectiveness was 1/3. Mean efficiency was 12% higher in the treatment group, but this difference was not statistically significant. Only for the third task, we found statistical support for accepting the alternative hypothesis that the pattern version led to higher efficiency. In the metric analysis, the pattern version had worse measurements for size and granularity while simultaneously having slightly better values for coupling metrics. Complexity and cohesion were not impacted.
Interpretation: For the experiment, our analysis suggests that the difference in efficiency is stronger with more experienced participants and increased from task to task. With respect to the metrics, the patterns introduce additional volume in the system, but also seem to decrease coupling in some areas.
Conclusions: Overall, there was no clear evidence for a decisive positive effect of using service-based patterns, neither for the student experiment nor for the metric analysis. This effect might only be visible in an experiment setting with higher initial effort to understand the system or with more experienced developers.
Scenario-based analysis is a comprehensive technique to evaluate software quality and can provide more detailed insights than e.g. maintainability metrics. Since such methods typically require significant manual effort, we designed a lightweight scenario-based evolvability evaluation method. To increase efficiency and to limit assumptions, the method exclusively targets service- and microservice-based systems. Additionally, we implemented web-based tool support for each step. Method and tool were also evaluated with a survey (N=40) that focused on change effort estimation techniques and hands-on interviews (N=7) that focused on usability. Based on the evaluation results, we improved method and tool support further. To increase reuse and transparency, the web-based application as well as all survey and interview artifacts are publicly available on GitHub. In its current state, the tool-supported method is ready for first industry case studies.
The fast moving process of digitization1 demands flexibility in order to adapt to rapidly changing business requirements and newly emerging business opportunities. New features have to be developed and deployed to the production environment a lot faster. To be able to cope with this increased velocity and pressure, a lot of software developing companies have switched to a Microservice Architecture (MSA) approach. Applications built this way consist of several fine-grained and heterogeneous services that are independently scalable and deployable. However, the technological and business architectural impacts of microservices based applications directly affect their integration into the digital enterprise architecture. As a consequence, traditional Enterprise Architecture Management (EAM) approaches are not able to handle the extreme distribution, diversity, and volatility of micro-granular systems and services. We are therefore researching mechanisms for dynamically integrating large amounts of microservices into an adaptable digital enterprise architecture.
To bring a pattern-based perspective to the SOA vs. microservices discussion, we qualitatively analyzed a total of 118 SOA patterns from 2 popular catalogs for their (partial) applicability to microservices. Patterns had to hold up to 5 derived microservices principles to be applicable. 74 patterns (63%) were categorized as fully applicable, 30 (25%) as partially applicable, and 14 (12%) as not applicable. Most frequently violated microservices characteristics werde Decentralization and Single System. The findings suggest that microservices and SOA share a large set of architectural principles and solutions in the general space of service-based systems while only having a small set of differences in specific areas.
Sleep is extremely important for physical and mental health. Although polysomnography is an established approach in sleep analysis, it is quite intrusive and expensive. Consequently, developing a non-invasive and non-intrusive home sleep monitoring system with minimal influence on patients, that can reliably and accurately measure cardiorespiratory parameters, is of great interest. The aim of this study is to validate a non-invasive and unobtrusive cardiorespiratory parameter monitoring system based on an accelerometer sensor. This system includes a special holder to install the system under the bed mattress. The additional aim is to determine the optimum relative system position (in relation to the subject) at which the most accurate and precise values of measured parameters could be achieved. The data were collected from 23 subjects (13 males and 10 females). The obtained ballistocardiogram signal was sequentially processed using a sixth-order Butterworth bandpass filter and a moving average filter. As a result, an average error (compared to reference values) of 2.24 beats per minute for heart rate and 1.52 breaths per minute for respiratory rate was achieved, regardless of the subject’s sleep position. For males and females, the errors were 2.28 bpm and 2.19 bpm for heart rate and 1.41 rpm and 1.30 rpm for respiratory rate. We determined that placing the sensor and system at chest level is the preferred configuration for cardiorespiratory measurement. Further studies of the system’s performance in larger groups of subjects are required, despite the promising results of the current tests in healthy subjects.
Sleep is an essential part of human existence, as we are in this state for approximately a third of our lives. Sleep disorders are common conditions that can affect many aspects of life. Sleep disorders are diagnosed in special laboratories with a polysomnography system, a costly procedure requiring much effort for the patient. Several systems have been proposed to address this situation, including performing the examination and analysis at the patient's home, using sensors to detect physiological signals automatically analysed by algorithms. This work aims to evaluate the use of a contactless respiratory recording system based on an accelerometer sensor in sleep apnea detection. For this purpose, an installation mounted under the bed mattress records the oscillations caused by the chest movements during the breathing process. The presented processing algorithm performs filtering of the obtained signals and determines the apnea events presence. The performance of the developed system and algorithm of apnea event detection (average values of accuracy, specificity and sensitivity are 94.6%, 95.3%, and 93.7% respectively) confirms the suitability of the proposed method and system for further ambulatory and in-home use.
Sleep is essential to physical and mental health. However, the traditional approach to sleep analysis—polysomnography (PSG)—is intrusive and expensive. Therefore, there is great interest in the development of non-contact, non-invasive, and non-intrusive sleep monitoring systems and technologies that can reliably and accurately measure cardiorespiratory parameters with minimal impact on the patient. This has led to the development of other relevant approaches, which are characterised, for example, by the fact that they allow greater freedom of movement and do not require direct contact with the body, i.e., they are non-contact. This systematic review discusses the relevant methods and technologies for non-contact monitoring of cardiorespiratory activity during sleep. Taking into account the current state of the art in non-intrusive technologies, we can identify the methods of non-intrusive monitoring of cardiac and respiratory activity, the technologies and types of sensors used, and the possible physiological parameters available for analysis. To do this, we conducted a literature review and summarised current research on the use of non-contact technologies for non-intrusive monitoring of cardiac and respiratory activity. The inclusion and exclusion criteria for the selection of publications were established prior to the start of the search. Publications were assessed using one main question and several specific questions. We obtained 3774 unique articles from four literature databases (Web of Science, IEEE Xplore, PubMed, and Scopus) and checked them for relevance, resulting in 54 articles that were analysed in a structured way using terminology. The result was 15 different types of sensors and devices (e.g., radar, temperature sensors, motion sensors, cameras) that can be installed in hospital wards and departments or in the environment. The ability to detect heart rate, respiratory rate, and sleep disorders such as apnoea was among the characteristics examined to investigate the overall effectiveness of the systems and technologies considered for cardiorespiratory monitoring. In addition, the advantages and disadvantages of the considered systems and technologies were identified by answering the identified research questions. The results obtained allow us to determine the current trends and the vector of development of medical technologies in sleep medicine for future researchers and research.
Determination of accelerometer sensor position for respiration rate detection: initial research
(2022)
Continuous monitoring of a patient's vital signs is essential in many chronic illnesses. The respiratory rate (RR) is one of the vital signs indicating breathing diseases. This article proposes the initial investigation for determining the accelerometric sensor position of a non-invasive and unobtrusive respiratory rate monitoring system. This research aims to determine the sensor position in relation to the patient, which can provide the most accurate values of the mentioned physiological parameter. In order to achieve the result, the particular system setup, including a mechanical sensor holder construction was used. The breathing signals from 5 participants were analyzed corresponding to the relaxed state. The main criterion for selecting a suitable sensor position was each patient's average acceleration amplitude excursion, which corresponds to the respiratory signal. As a result, we provided one more defined important parameter for the considered system, which was not determined before.
Das Provisioning Tool automaIT wurde prototypisch um die Möglichkeit eines Data Discovery erweitert, mit dem Ziel, nicht durch automaIT verwaltete Systeme anbinden und steuern zu können. Daten aus dem Data Discovery werden mittels dem Tool Facter gesammelt und können dynamisch in ausführbare Modelle von automaIT integriert und ausgewertet werden. Dadurch kann der Verlauf weiterer Provisionierungsschritte gesteuert werden, ohne dass es eines manuellen Eingriffs bedarf.
Distraction of the driver is one of the most frequent causes for car accidents. We aim for a computational cognitive model predicting the driver’s degree of distraction during driving while performing a secondary task, such as talking with co-passengers. The secondary task might cognitively involve the driver to differing degrees depending on the topic of the conversation or the number of co-passengers. In order to detect these subtle differences in everyday driving situations, we aim to analyse in-car audio signals and combine this information with head pose and face tracking information. In the first step, we will assess driving, video and audio parameters reliably predicting cognitive distraction of the driver. These parameters will be used to train the cognitive model in estimating the degree of the driver’s distraction. In the second step, we will train and test the cognitive model during conversations of the driver with co-passengers during active driving. This paper describes the work in progress of our first experiment with preliminary results concerning driving parameters corresponding to the driver’s degree of distraction. In addition, the technical implementation of our experiment combining driving, video and audio data and first methodological results concerning the auditory analysis will be presented. The overall aim for the application of the cognitive distraction model is the development of a mobile user profile computing the individual distraction degree and being applicable also to other systems.
Converting users into customers : the role of user profile information and customer journey analysis
(2016)
Due to the digital transformation, the importance of web analysis and user profiling for enterprises is increasing rapidly as customers focus on digital channels to obtain information about products and brands. While there exists a lot research on these topics, only a minority of firms use them to their advantage. This study aims to tighten the link between research and business such that experimental methods can be used for the improvement of communication strategies in practice. Therefore, a systematic literature analysis is conducted, workshops are observed and documented and an empirical study is used to integrate single steps into a framework for the
practical usage of user profiling and customer journey analysis.
The shift of populations to cities is creating challenges in many respects, thus leading to increasing demand for smart solutions of urbanization problems. Smart city applications range from technical and social to economic and ecological. The main focus of this work is to provide a systematic literature review of smart city research to answer two main questions: (1) How is current research on smart cities structured? and (2) What directions are relevant for future research on smart cities? To answer these research questions, a text-mining approach is applied to a large number of publications. This provides an overview and gives insights into relevant dimensions of smart city research. Although the main dimensions of research are already described in the literature, an evaluation of the relevance of such dimensions is missing. Findings suggest that the dimensions of environment and governance are popular, while the dimension of economy has received only limited attention.
The shift of populations to cities is creating challenges in many respects, thus leading to increasing demand for smart solutions of urbanization problems. Smart city applications range from technical and social to economic and ecological. The main focus of this work is to provide a systematic literature review of smart city research to answer two main questions: (1) How is current research on smart cities structured? And (2) What directions are relevant for future research on smart cities? To answer these research questions, a text-mining approach is applied to a large number of publications. This provides an overview and gives insights into relevant dimensions of smart city research. Although the main dimensions of research are already described in the literature, an evaluation of the relevance of such dimensions is missing. Findings suggest that the dimensions of environment and governance are popular, while the dimension of economy has received only limited attention.
The benefits of urban data cannot be realized without a political and strategic view of data use. A core concept within this view is data governance, which aligns strategy in data-relevant structures and entities with data processes, actors, architectures, and overall data management. Data governance is not a new concept and has long been addressed by scientists and practitioners from an enterprise perspective. In the urban context, however, data governance has only recently attracted increased attention, despite the unprecedented relevance of data in the advent of smart cities. Urban data governance can create semantic compatibility between heterogeneous technologies and data silos and connect stakeholders by standardizing data models, processes, and policies. This research provides a foundation for developing a reference model for urban data governance, identifies challenges in dealing with data in cities, and defines factors for the successful implementation of urban data governance. To obtain the best possible insights, the study carries out qualitative research following the design science research paradigm, conducting semi-structured expert interviews with 27 municipalities from Austria, Germany, Denmark, Finland, Sweden, and the Netherlands. The subsequent data analysis based on cognitive maps provides valuable insights into urban data governance. The interview transcripts were transferred and synthesized into comprehensive urban data governance maps to analyze entities and complex relationships with respect to the current state, challenges, and success factors of urban data governance. The findings show that each municipal department defines data governance separately, with no uniform approach. Given cultural factors, siloed data architectures have emerged in cities, leading to interoperability and integrability issues. A city-wide data governance entity in a cross-cutting function can be instrumental in breaking down silos in cities and creating a unified view of the city’s data landscape. The further identified concepts and their mutual interaction offer a powerful tool for developing a reference model for urban data governance and for the strategic orientation of cities on their way to data-driven organizations.
Data governance have been relevant for companies for a long time. Yet, in the broad discussion on smart cities, research on data governance in particular is scant, even though data governance plays an essential role in an environment with multiple stakeholders, complex IT structures and heterogeneous processes. Indeed, not only can a city benefit from the existing body of knowledge on data governance, but it can also make the appropriate adjustments for its digital transformation. Therefore, this literature review aims to spark research on urban data governance by providing an initial perspective for future studies. It provides a comprehensive overview of data governance and the relevant facets embedded in this strand of research. Furthermore, it provides a fundamental basis for future research on the development of an urban data governance framework.
Die Bereitstellung klinischer Informationen im Operationssaal ist ein wichtiger Aspekt zur Unterstützung des chirurgischen Teams. Die roboter-assistierte Ösophagusresektion ist ein besonders komplexer Eingriff, der Potenzial zur workflowbasierten Unterstützung bietet. Wir präsentieren erste Ergebnisse der Entwicklung eines Checklisten-Tools mit der zugrundeliegenden Modellierung des chirurgischen Workflows und Informationsbedarf der Chirurgen. Das Checklisten-Tool zeigt hierfür die durchzuführenden Schritte chronologisch an und stellt zusätzliche Informationen kontextadaptiert bereit. Eine automatische Dokumentation von Start- und Endzeiten einzelner OP-Phasen und Schritte soll zukünftige Prozessanalysen der Operation ermöglichen.
Zero or plus energy office buildings must have very high building standards and require highly efficient energy supply systems due to space limitations for renewable installations. Conventional solar cooling systems use photovoltaic electricity or thermal energy to run either a compression cooling machine or an absorption-cooling machine in order to produce cooling energy during daytime, while they use electricity from the grid for the nightly cooling energy demand. With a hybrid photovoltaic-thermal collector, electricity as well as thermal energy can be produced at the same time. These collectors can produce also cooling energy at nighttime by longwave radiation exchange with the night sky and convection losses to the ambient air. Such a renewable trigeneration system offers new fields of applications. However, the technical, ecological and economical aspects of such systems are still largely unexplored.
In this work, the potential of a PVT system to heat and cool office buildings in three different climate zones is investigated. In the investigated system, PVT collectors act as a heat source and heat sink for a reversible heat pump. Due to the reduced electricity consumption (from the grid) for heat rejection, the overall efficiency and economics improve compared to a conventional solar cooling system using a reversible air-to-water heat pump as heat and cold source.
A parametric simulation study was carried out to evaluate the system design with different PVT surface areas and storage tank volumes to optimize the system for three different climate zones and for two different building standards. It is shown such systems are technically feasible today. With a maximum utilization of PV electricity for heating, ventilation, air conditioning and other electricity demand such as lighting and plug loads, high solar fractions and primary energy savings can be achieved.
Annual costs for such a system are comparable to conventional solar thermal and solar electrical cooling systems. Nevertheless, the economic feasibility strongly depends on country specific energy prices and energy policy. However, even in countries without compensation schemes for energy produced by renewables, this system can still be economically viable today. It could be shown, that a specific system dimensioning can be found at each of the investigated locations worldwide for a valuable economic and ecological operation of an office building with PVT technologies in different system designs.
The global demand for resources such as energy, land, or water is constantly increasing. It is therefore not sur- prising that research on the Food-Energy-Water (FEW) nexus has become a scientific as well as a general focus in recent years. A significant increase in publications since 2015 can be observed, and it can be expected that this trend will continue. A multilevel (macro, meso, and micro) perspective is essential, as the FEW nexus has cross- sectoral interdependencies. Several review studies on the FEW nexus can be found in the literature, in general, it can be concluded that the FEW nexus is a multi-disciplinary and complex topic. The studies examined identify essential fields of action for research, policy, and society. However, questions such as what are the main research fields at each level? Is it possible to divide the research into specific clusters? and do the clusters correlate with the levels, and what are the methods of modeling used in the clusters and levels? are still not fully discussed in the literature. An extensive literature review was conducted to get insight into the existing research areas. Especially in such fields as the FEW nexus, the amount of literature can get huge, and a human could get lost analyzing the literature manually. For that, we created word clouds and performed a cluster- and network-analysis to support the selection of most relevant papers for a detailed reading. In 2021, the most publications were published, with 173 publications, which corresponds to a share of 26.6 %. There has been a significant increase since 2015, and it can be expected that this trend will continue in the coming years. Most of the first authors come from the USA (25.4 %), followed by China with 22.4 %. From the word cloud and the top 20 words, which appear in the title and abstract, it can be deduced that the topic water is the most represented. However, the terms system, resource, model, study, change, development, and management also appear to be very important, which indi- cates the importance of a holistic approach to the topic. In total 9 clusters could be identified at the different levels. It can be seen that three clusters form well. For the others, a rather diffuse picture can be observed. In order to find out which topics are hidden behind the individual clusters, 6 publications from each cluster were subjected to a more detailed examination. With these steps, a number of 54 publications were identified for de- tailed consideration. The modeling approaches that are currently being applied in research can be classified into domain-specific tools (e. g. global water models, crop models or global climate models) and into more general tools to perform for example a life cycle analysis, spatial analysis using geographic information system, or system dynamics for a general understanding of the links between the domains. With the domain-specific tools, detailed research questions can be addressed to answer questions for a specific domain. However, these tools have the disadvantage that especially the links between the sectors food, energy, and water are not fully considered. Many implementations that are made today are at lowest level (micro) relate to bounded spatial areas and are derived from macro and meso level goals.
The paper explains a workflow to simulate the food energy water (FEW) nexus for an urban district combining various data sources like 3D city models, particularly the City Geography Markup Language (CityGML) data model from the Open Geospatial Consortium, Open StreetMap and Census data. A long term vision is to extend the CityGML data model by developing a FEW Application Domain Extension (FEW ADE) to support future FEW simulation workflows such as the one explained in this paper. Together with the mentioned simulation workflow, this paper also identifies some necessary FEW related parameters for the future development of a FEW ADE. Furthermore, relevant key performance indicators are investigated, and the relevant datasets necessary to calculate these indicators are studied. Finally, different calculations are performed for the downtown borough Ville-Marie in the city of Montréal (Canada) for the domains of food waste (FW) and wastewater (WW) generation. For this study, a workflow is developed to calculate the energy generation from anaerobic digestion of FW and WW. In the first step, the data collection and preparation was done. Here relevant data for georeferencing, data for model set-up, and data for creating the required usage libraries, like food waste and wastewater generation per person, were collected. The next step was the data integration and calculation of the relevant parameters, and lastly, the results were visualized for analysis purposes. As a use case to support such calculations, the CityGML level of detail two model of Montréal is enriched with information such as building functions and building usages from OpenStreetMap. The calculation of the total residents based on the CityGML model as the main input for Ville-Marie results in a population of 72,606. The statistical value for 2016 was 89,170, which corresponds to a deviation of 15.3%. The energy recovery potential of FW is about 24,024 GJ/year, and that of wastewater is about 1,629 GJ/year, adding up to 25,653 GJ/year. Relating values to the calculated number of inhabitants in Ville-Marie results in 330.9 kWh/year for FW and 22.4 kWh/year for wastewater, respectively.
EAM ist ein holistischer Ansatz, um komplexe IT- und Unternehmensstrukturen darzustellen. Dabei ist es von zentraler Bedeutung, diese Strukturen möglichst komplett und übersichtlich zu visualisieren. Ein Ansatz, dies zu erreichen, ist eine multiperspektivische Darstellung von mehreren Views in einem Architekturcockpit. Dabei können mehrere Views simultan betrachtet und analysiert werden. Dadurch ist es möglich, die Auswirkungen einer Analyse des Views eines Stakeholders simultan aus den Views anderer Stakeholder betrachten zu können, um eventuelle Wechselwirkungen zu erkennen und einen allgemeinen Überblick über die Unternehmensarchitektur zu behalten. In dieser Arbeit zeigen wir, von der Konzeption über die Umsetzung bis zu einem Anwendungsbeispiel, wie ein solches Architekturcockpit realisiert werden kann.
In Folge der gegenwärtigen Digitalisierung in der produzierenden Industrie werden Anwendungen oder Services mit potentiell positiven Auswirkungen auf Faktoren wie Effektivität und Arbeitsqualität entwickelt. Ein geeigneter Ansatz zur Stärkung motivierender Aspekte im Arbeitskontext kann Gamification darstellen. In dieser Arbeit ist die initiale Konzeption und Evaluation eines Gamification-Ansatzes für Anwender eines KI-Service zur Maschinenoptimierung dargestellt und möglichen Anforderungen an ein Konzept zur Motivationssteigerung extrahiert.
Entrepreneurial software engineering: towards a hybrid development method for early-stage startups
(2021)
A considerable share of innovative software-intensive products is developed by startups. However, product development in an early-stage startup is not a sequential process. A business idea is usually based on a number of assumptions. The riskiest assumptions need to be tested. Depending on the test results, a product strategy may change several times. This raises the question of how to create sufficiently stable software using engineering principles despite a dynamic product strategy that is subject to many uncertainties. Hybrid development methods that combine agile aspects with classical engineering methods seem to be a good choice in such a start-up context. This paper proposes a lightweight hybrid development method that provides early-stage startups with a framework to support the development of single-feature minimum viable products. The method was derived from a start-up company's founding case and evaluated in expert interviews. The proposed method is intended to provide a basis for discussion between practitioners and scientists with the aim of better understanding the application of software engineering principles in software start-ups.
In dieser Ausarbeitung wird auf Visualisierungsmöglichkeiten von neuronalen Netzen eingegangen. Ein neuronales Netz scheint zuerst nicht von außen einsehbar und ist somit für viele eine Blackbox. Häufig genutzte Python-Bibliotheken, zum Beispiel TensorFlow, werden vorgestellt und deren Stärken wie auch Schwächen präsentiert. Anhand dieser werden bereits bestehende Visualisierungen gezeigt und ihr derzeitiger Einsatz wird erläutert. Durch einen Vergleich soll ersichtlich werden, welche Bibliothek am meisten Daten während des Trainings liefert, damit diese Informationen weiter verarbeitet werden. Diese Daten sollen so visualisiert werden, dass sie bei der Entwicklung eines neuronalen Netzes unterstützend sind. Ziel ist es, auf die Möglichkeiten einzugehen, welche geboten werden können. Durch eine Vereinfachung des Debuggings neuronaler Netze sollen weiterführende Entwicklungen in diese Richtung unterstützt werden.
In diesem Beitrag wird ein neuer Ansatz vorgestellt, welcher eine schwerkraftreduzierte Navigation innerhalb einer VR-Umgebung erlaubt, wie beispielsweise ein simulierter Mondspaziergang. Zur Navigation in der VR-Umgebung wird der Cyberith Virtualizer ein-gesetzt. Die Schwerkraftsimulation erfolgt mittels eines einstellbaren Gurtsystems, das anelastischen Seilen aufgehängt wird und abgestufte Schwerkraftkompensationen erlaubt. Als Umgebung wurde ein Raumschiffszenario sowie eine Mondoberfläche generiert. Hier sind in der aktuellen Anwendung einfache Interaktionen möglich. In Anlehnung an existierende Gravity Offload Systeme wird die Lösung ViRGOS bezeichnet. ViRGOS wurde bereits bei verschiedenen Besuchsterminen und Hochschulevents eingesetzt, so dass erste Rückmeldungen von Nutzern eingeholt werden konnten.
Public transport maps are typically designed in a way to support route finding tasks for passengers, while they also provide an overview about stations, metro lines, and city-specific attractions. Most of those maps are designed as a static representation, maybe placed in a metro station or printed in a travel guide. In this paper, we describe a dynamic, interactive public transport map visualization enhanced by additional views for the dynamic passenger data on different levels of temporal granularity. Moreover, we also allow extra statistical information in form of density plots, calendar-based visualizations, and line graphs. All this information is linked to the contextual metro map to give a viewer insights into the relations between time points and typical routes taken by the passengers. We also integrated a graph-based view on user-selected routes, a way to interactively compare those routes, an attribute- and property-driven automatic computation of specific routes for one map as well as for all available maps in our repertoire, and finally, also the most important sights in each city are included as extra information to include in a user-selected route. We illustrate the usefulness of our interactive visualization and map navigation system by applying it to the railway system of Hamburg in Germany while also taking into account the extra passenger data. As another indication for the usefulness of the interactively enhanced metro maps we conducted a controlled user experiment with 20 participants.