Informatik
Refine
Year of publication
Document Type
- Conference proceeding (570)
- Journal article (199)
- Book chapter (62)
- Doctoral Thesis (18)
- Book (10)
- Anthology (10)
- Patent / Standard / Guidelines (2)
- Report (2)
- Working Paper (2)
Is part of the Bibliography
- yes (875)
Institute
- Informatik (875)
- Technik (2)
- ESB Business School (1)
Publisher
- Springer (205)
- Hochschule Reutlingen (104)
- IEEE (90)
- Gesellschaft für Informatik e.V (62)
- Elsevier (47)
- Association for Computing Machinery (38)
- IARIA (26)
- RWTH Aachen (15)
- De Gruyter (14)
- Association for Information Systems (12)
Rapid Prototyping Plattformen reduzieren die Entwicklungszeit, indem das Überprüfen einer Idee in Form eines Prototyps schnell umzusetzen ist und mehr Zeit für die eigentliche Anwendungsentwicklung mit Benutzerschnittstellen zur Verfügung steht. Dieser Ansatz wird schon lange bei technischen Plattformen, wie bspw. dem Arduino, verfolgt. Um diese Form von Prototyping auf Wearables zu übertragen, wird in diesem Paper WearIT vorgestellt. WearIT besteht als Wearable Prototyping Plattform aus vier Komponenten: Einer Weste, Sensor- und Aktorshieldss, einer eigenen bibliothek sowie einem Mainboard bestehend aus Arduino, Raspberry Pi, einer Steckplatine und einem GPS-Modul. Als Ergebnis kann ein Wearable Prototyp schnell, durch das Anbringen von Sensor- und Aktorshields an der WearIT Weste, entwickelt werden. Diese Sensor- und Aktorshields können anschließend durch die WearIT-Bibliothek programmiert werden. Dafür kann über Virtual Network Computing (VNC) mit einem entfernten Rechner auf die Bildschirminhalte des Rasperry Pis zugegriffen und der Arduino programmiert werden.
Die meisten der aktuell im Allag vorfindlichen Touch-Flächen wurden unter Anwendung komplexer und kostenintensiver Technologien realisiert. Gerade für das Anwendungsszenario eines Touchfloors, bei welchem meist eine überdurchschnittlich große Touch-Fläche erwünscht ist, werden kostengünstigere Umsetzungsmöglichkeiten angestrebt. Dieses Paper dient als Ausgangsbasis für die Umsetzung eines Low-cost Touchfloors, der die kollaborative Arbeit eines Projektteams unterstützen soll. Mithilfe einer Analyse des State of the Arts der Touch-Technologien und einer anschließenden Evaluation, wird die Touch-Technologie abgeleitet, die sich am besten zur Realisierung dieses low-cost Touchfloors eignet. Aus der Evaluation geht hervor, dass vor allem optische Touch-Technologien, insbesondere visionsbasierte, für die Umsetzung von kostengünstigen großen Touch-Flächen geeignet sind.
Integrierte Schaltkreise (IC) sind ein integraler Bestandteil vieler Geräte wie zum Beispiel Smartphones, Computer oder Fernseher. Auf den Schaltkreisen werden immer mehr Funktionen integriert. Um die Arbeit auch zukünftig in gegebener Zeit bewältigen zu können, bedarf es daher einer Möglichkeit für die gleichzeitige Zusammenarbeit der Entwickler. Unter dem Arbeitstitel eCEDA (eCollaboration for Electronic Design Automation) wird ein Konzept für eine Webanwendung entwickelt, die die Echtzeitkollaboration von Entwicklern im Chipentwurf ermöglichen soll. Dieses Konzept sowie verschiedene Aspekte der Kollaboration werden in dieser Arbeit behandelt.
Anforderungen an die Mensch-Maschine-Schnittstelle im Automobil auf dem Weg zum autonomen Fahren
(2017)
In den letzten Jahrzehnten haben immer mehr Fahrerassistenzsysteme Einzug in das Automobil gefunden und bereiten damit den Weg zu vollautonomen Fahrzeugen der Zukunft vor. So bieten bereits viele Hersteller Ausstattungsvarianten ihrer Fahrzeuge an, die für den Umstieg in die vollautonome Zukunft gewappnet sind. Um den Menschen mit auf den Weg zu nehmen, werden einige Anforderungen an die Mensch-Maschine-Schnittstelle (MMS) des Automobils gestellt. Für die teilautonomen Fahrzeuge der nächsten Generation gilt es, den Fahrerwechsel zwischen manuellem und autonomen Fahren für die Menschen bestmöglich zu gestalten. Die Arbeit wirft einen Blick auf ausgewählte Ansätze für zukünftige MMS-Systeme und bewertet diese anhand der Übergabezeiten zwischen Mensch und Maschine. Ein Wandel der MMS im Automobil wird empfohlen, um den Menschen mit den neuen Technologien vertraut zu machen.
This paper investigates the impact of dynamic capabilities (DC) on brand love. From a resource-based view, there is little clarity vis-à-vis the specific capabilities that drive the ability to create brand love. This paper focuses on three research questions: Firstly, which dynamic capabilities are relevant for brand love? Secondly, how strong is the impact of certain dynamic capabilities on brand love? Thirdly, which conditions mediate and moderate the impact of specific dynamic capabilities on brand love? Data from a multi-method research approach have been used to itentify the specific capabilities that corporations need, to enhance brand love. Furthermore, a standardized online survey was conducted on marketing executives and evaluated by structural equation modeling. The results indicate, that customer expertise plays a major role in the relationship between dynamic capabilities and brand love. Furthermore, this relationship is more important in markets that have a low competitive differentiation in products and services.
Pokémon Go was the first mobile Augmented Reality (AR) game that made it to the top of the download charts of mobile applications. However, very little is known about this new generation of mobile online Augmented Reality (AR) games. Existing media usage and technology acceptance theories provide limited applicability to the understanding of its users. Against this background, this research provides a comprehensive framework that incorporates findings from uses & gratification theory (U>), technology acceptance and risk research as well as flow theory. The proposed framework aims at explaining the drivers of attitudinal and intentional reactions, such as continuance in gaming or willingness to conduct in-app purchases. A survey among 642 Pokémon Go players provides insights into the psychological drivers of mobile AR games. Results show that hedonic, emotional and social benefits, and social norms drive, vice versa physical risks (but not privacy risks) hinder consumer reactions. However, the importance of these drivers differs between different forms of user behavior.
The increasing number of connected mobile devices such as fitness trackers and smartphones define new data for health insurances, enabling them to gain deeper insights into the health of their customers. These additional data sources plus the trend towards an interconnected health community, including doctors, hospitals and insurers, lead to challenges regarding data filtering, organization and dissemination. First, we analyze what kind of information is relevant for a digital health insurance. Second, functional and non-functional requirements for storing and managing health data in an interconnected environment are defined. Third, we propose a data architecture for a digitized health insurance, consisting of a data model and an application architecture.
Digitization in the energy sector is a necessity to enable energy savings and energy efficiency potentials. Managing decentralized corporate energy systems is hindered by a non-existence. The required integration of energy objectives into business strategy creates difficulties resulting in inefficient decisions. To improve this, practice-proven methods such as Balanced Scorecard, Enterprise Architecture Management and the Value Network approach are transferred to the energy domain. The methods are evaluated based on a case study. Managing multi-dimensionality, high complexity and multiple actors are the main drivers for an effective and efficient energy management system. The underlying basis to gain the positive impacts of these methods on decentralized corporate energy systems is digitization of energy data and processes.
Smart meter based business models for the electricity sector : a systematical literature research
(2017)
The Act on the Digitization of the Energy Transition forces German industries and households to introduce smart meters in order to save engery, to gain individual based electricity tariffs and to digitize the energy data flow. Smart meter can be regarded as the advancement of the traditional meter. Utilizing this new technology enables a wide range of innovative business models that provide additional value for the electricity suppliers as well as for their customers. In this study, we followed a two-step approach. At first, we provide a state-of-the-art comparison of these business models found in the literature and identify structural differences in the way they add value to the offered products and services. Secondly, the business models are grouped into categories with respect to customer segmetns and the added value to the smart grid. Findings indicate that most business models focus on the end-costumer as their main customer.
In recent times, enterprises have been increasingly dealing with the use of social media in internal communication and collaboration. In particular, so-called Enterprise Social Networks (ESN) promise meaningful benefits for the nature of work in corporations. However, these platforms often suffer from poor degrees of use. This raises the question of what initiatives enterprise can launch in order to stimulate the vitality of ESN. Since the use of ESN is often voluntary, individual adoption by employees need to be examined to find an answer. Therefore, the Unified Theory of Acceptance and Use of Technology (UTAUT) model was selected for the theoretical foundation of this paper. Following a qualitative research approach, the available research provides an analysis of expert interviews on specific ESN implementation strategies and included factors. In order to extensively conceptualize and generalize these strategic considerations, we conducted an inductive coding process. The results reveal that ESN implementation strategies can be understood as a multi-level construct (individual vs. group vs. organizational level) containing different factors dependent on the degree of documentation and intensity. This research in progress describes a qualitative evaluation as a preliminary study for further quantitative analysis of an ESN adoption model.
Steady growing research material in a variety of databases, repositories and clouds make academic content more than ever hard to discover. Finding adequate material for the own research however is essential for every researcher. Based on recent developments in the field of artificial intelligence and the identified digital capabilities of future universities a change in the basic work of academic research is predicted. This study defines the idea of how artificial intelligence could simplifiy academic research at a digital university. Today's studies in the field of AI spectacle the true potential and its commanding impact on academic research.
The digital transformation of our society changes the way we live, work, learn, communicate, and collaborate. This disruptive change drive current and next information processes and systems that are important business enablers for the context of digitization since years. Our aim is to support flexibility and agile transformations for both business domains and related information technology with more flexible enterprise information systems through adaptation and evolution of digital architectures. The present research paper investigates the continuous bottom-up integration of micro-granular architectures for a huge amount of dynamically growing systems and services, like microservices and the Internet of Things, as part of a new composed digital architecture. To integrate micro-granular architecture models into living architectural model versions we are extending enterprise architecture reference models by state of art elements for agile architectural engineering to support digital products, services, and processes.
With the Internet of Things being one of the most discussed trends in the computer world lately, many organizations find themselves struggling with the great paradigm shift and thus the implementation of IoT on a strategic level. The Ignite methodoogy as a part of the Enterprise-IoT project promises to support organizations with these strategic issues as it combines best practices with expert knowledge from diverse industries helping to create a better understanding of how to transform into an IoT driven business. A framework that is introduced within the context of IoT business model development is the Bosch IoT Business Model Builder. In this study the provided framework is compared to the Osterwalder Business Model Canvas and the St. Gallen Business Model Navigator, the most commonly used and referenced frameworks according to a quantitative literature analysis.
In this paper a method for the generation of gSPM with ontology-based generalization was presented. The resulting gSPM was modeled with BPMN/BPMNsix in an efficient way and could be executed with BPMN workflow engines. In the next step the implementation of resource concepts, anatomical structures, and transition probabilities for workflow execution will be realized.
Diese Arbeit liefert einen Konzeptentwurf, der die Integration verschiedener Systeme mit prozessrelevanten klinischen Diensten gewährleistet. Chirurgische Abläufe werden in Form von Prozessen modelliert. Die Wahl der Notation und die Art der Modellierung dieser Prozesse spielt in der heutigen Forschung in diesem Gebiet eine zentrale Rolle. Sind diese Prozesse modelliert, besteht die Möglichkeit, diese in einer Workflow-Engine automatisiert auszuführen. Im Rahmen der Entwicklung eines Workflow-Managment-Systems stellt sich die Frage, wie die Anbindung dieser Workflow-Engine mit anderen Systemen erfolgen soll. In der Arbeit werden Schnittstellen abstrakt in der Web Services Description Language (WSDL) definiert. Darum werden automatisiert Artefakte erzeugt. Auf der Grundlage dieser Artefakte erfolgt die Integration der Systeme. Die Workflow-Engine kommunizieren über SOAP-Nachrichten (Simple Object Access Protocol) mit den entsprechenden Systemen. Dieser Ansatz wurde mithilfe eines Prototyps validiert und umgesetzt.
This paper contributes to the automatic detection of perioperative workflow by developing a binary endoscope localization. Automated situation recognition in the context of an intelligent operating room requires the automatic conversion of low level cues into more abstract high level information. Imagery from a laparoscope delivers rich content that is easy to obtain but hard to process. We introduce a system which detects if the endoscope's distal tip is inside or outsiede the patient based on the endoscope video. This information can be used as one parameter in a situation recognition pipeline. Our localization performs in real-time at a video resolution of 1280x720 and 5-fold cross validation yields mean F1-scores of up to 0,94 on videos of 7 laparoscopies.
Software and system development is complex and diverse, and a multitude of development approaches is used and combined with each other to address the manifold challenges companies face today. To study the current state of the practice and to build a sound understanding about the utility of different development approaches and their application to modern software system development, in 2016, we launched the HELENA initiative. This paper introduces the 2nd HELENA workshop and provides an overview of the current project state. In the workshop, six teams present initial findings from their regions, impulse talk are given, and further steps of the HELENA roadmap are discussed.
Software startups often make assumptions about the problems and customers they are addressing as well as the market and the solutions they are developing. Testing the right assumptions early is a means to mitigate risks. Approaches such as Lean Startup foster this kind of testing by applying experimentation as part of a constant build-measure-learn feedback loop. The existing research on how software startups approach experimentation is very limited. In this study, we focus on understanding how software startups approach experimentation and identify challenges and advantages with respect to conducting experiments. To achieve this, we conducted a qualitative interview study. The initial results show that startups often spent a disproportionate amount of time focusing on creating solutions without testing critical assumptions. Main reasons are the lack of awareness, that these assumptions can be tested early and a lack of knowledge and support on how to identify, prioritize and test these assumptions. However, startups understand the need for testing risky assumptions and are open to conducting experiments.
Context: The current situation and future scenarios of the automotive domain require a new strategy to develop high quality software in a fast pace. In the automotive domain, it is assumed that a combination of agile development practices and software product lines is beneficial, in order to be capable to handle high frequency of improvements. This assumption is based on the understanding that agile methods introduce more flexibility in short development intervals. Software product lines help to manage the high amount of variants and to improve quality by reuse of software for long term development.
Goal: This study derives a better understanding of the expected benefits for a combination. Furthermore, it identifies the automotive specific challenges that prevent the adoption of agile methods within the software product line.
Method: Survey based on 16 semi structured interviews from the automotive domain, an internal workshop with 40 participants and a discussion round on ESE congress 2016. The results are analyzed by means of thematic coding.
In this note we look at anisotropic approximation of smooth functions on bounded domains with tensor product splines. The main idea is to extend such functions and then use known approximation techniques on Rd. We prove an error estimate for domains for which bounded extension operators exist. This obvious approach has some limitations. It is not applicable without restrictions on the chosen coordinate degree even if the domain is as simple as the unit disk. Further for approximation on Rd there are error estimates in which the grid widths and directional derivatives are paired in an interesting way. It seems impossible to maintain this property using extension operators.
Data Integration of heterogeneous data sources relies either on periodically transferring large amounts of data to a physical Data Warehouse or retrieving data from the sources on request only. The latter results in the creation of what is referred to as a virtual Data Warehouse, which is preferable when the use of the latest data is paramount. However, the downside is that it adds network traffic and suffers from performance degradation when the amount of data is high. In this paper, we propose the use of a readCheck validator to ensure the timeliness of the queried data and reduced data traffic. It is further shown that the readCheck allows transactions to update data in the data sources obeying full Atomicity, Consistency, Isolation, and Durability (ACID) properties.
The Ninth International Conference on Advances in Databases, Knowledge, and Data Applications (DBKDA 2017), held between May 21 - 25, 2017 - Barcelona, pain, continued a series of international events covering a large spectrum of topics related to advances in fundamentals on databases, evolution of relation between databases and other domains, data base technologies and content processing, as well as specifics in applications domains databases.
Advances in different technologies and domains related to databases triggered substantial improvements for content processing, information indexing, and data, process and knowledge mining. The push came from Web services, artificial intelligence, and agent technologies, as well as from the generalization of the XML adoption.
High-speed communications and computations, large storage capacities, and load-balancing for distributed databases access allow new approaches for content processing with incomplete patterns, advanced ranking algorithms and advanced indexing methods.
Evolution on e-business, ehealth and telemedicine, bioinformatics, finance and marketing, geographical positioning systems put pressure on database communities to push the ‘de facto’ methods to support new requirements in terms of scalability, privacy, performance, indexing, and heterogeneity of both content and technology.
Purpose: Medical processes can be modeled using different methods and notations.Currently used modeling systems like Business Process Model and Notation (BPMN) are not capable of describing the highly flexible and variable medical processes in sufficient detail.
Methods: We combined two modeling systems, Business Process Management (BPM) and Adaptive Case Management (ACM), to be able to model non-deterministic medical processes. We used the new Standards Case Management Model and Notation (CMMN) and Decision Management Notation (DMN).
Results: First, we explain how CMMN, DMN and BPMN could be used to model non-deterministic medical processes. We applied this methodology to model 79 cataract operations provided by University Hospital Leipzig, Germany, and four cataract operations provided by University Eye Hospital Tuebingen, Germany. Our model consists of 85 tasks and about 20 decisions in BPMN. We were able to expand the system with more complex situations that might appear during an intervention.
Conclusion: An effective modeling of the cataract intervention is possible using the combination of BPM and ACM. The combination gives the possibility to depict complex processes with complex decisions. This combination allows a significant advantage for modeling perioperative processes.
The third Digital Enterprise Computing Conference DEC 17 at the Herman Hollerith Center in Böblingen brings together students, researchers, and practitioners to discuss solutions, experiences, and future developments for the digital transformation. Digitization of business and IT defines the conference agenda: digital models & architecture, digital marketing, agility & innovation.
The digitization of our society changes the way we live, work, learn, communicate, and collaborate. The Internet of Things, enterprise social networks, adaptive case management, mobility systems, analytics for big data, and cloud services environments are emerging to support smart connected products and services and the digital transformation. Biological metaphors of living and adaptable ecosystems provide the logical foundation for self-optimizing and resilient run-time environments for intelligent business services and service-oriented enterprise architectures. Our aim is to support flexibility and agile transformations for both business domains and related information technology. The present research paper investigates mechanisms for decision analytics in the context of multi-perspective explorations of enterprise services and their digital enterprise architectures by extending original architecture reference models with state of art elements for agile architectural engineering for the digitization and collaborative architectural decision support. The paper’s context focuses on digital transformations of business and IT and integrates fundamental mappings between adaptable digital enterprise architectures and service-oriented information systems. We are putting a spotlight on the example domain – Internet of Things.
This book showcases new and innovative approaches to biometric data capture and analysis, focusing especially on those that are characterized by non-intrusiveness, reliable prediction algorithms, and high user acceptance. It comprises the peer-reviewed papers from the international workshop on the subject that was held in Ancona, Italy, in October 2014 and featured sessions on ICT for health care, biometric data in automotive and home applications, embedded systems for biometric data analysis, biometric data analysis: EMG and ECG, and ICT for gait analysis. The background to the book is the challenge posed by the prevention and treatment of common, widespread chronic diseases in modern, aging societies. Capture of biometric data is a cornerstone for any analysis and treatment strategy. The latest advances in sensor technology allow accurate data measurement in a non-intrusive way, and in many cases it is necessary to provide online monitoring and real-time data capturing to support a patient’s prevention plans or to allow medical professionals to access the patient’s current status. This book will be of value to all with an interest in this expanding field.
Besides the optimisation of the car, energy-efficiency and safety can also be increased by optimising the driving behaviour. Based on this fact, a driving system is in development whose goal is to educate the driver in energy efficient and safe driving. It monitors the driver, the car and the environment and gives energy-efficiency and safety relevant recommendations. However, the driving system tries not to distract or bother the driver by giving recommendations for example during stressful driving situations or when the driver is not interested in that recommendation. Therefore, the driving system monitors the stress level of the driver as well as the reaction of the driver to a given recommendation and decideswhether to give a recommendation or not. This allows to suppress recommendations when needed and, thus, to increase the road safety and the user acceptance of
the driving system.
A lot of people need help in their daily life to wash, select and manage their clothing. The goal of this work is to design an assistant system (eKlarA) to support the user by giving recommendations to choose the clothing combinations, to find the clothing and to wash the clothing. The idea behind eKlarA is to generate a system that uses sensors to identify the clothing and their state in the clothing cycle. The clothing cycle consists of the stations: closets, laundry basket and washing machine in one or several places. The system uses the information about the clothing, weather and calendar to support the user in the different steps of the clothing cycle. The first prototype of this system has been developed and tested. The test results are presented in this work.
Stress is recognized as a predominant disease with raising costs for rehabilitation and treatment. Currently there are several different approaches that can be used for determining and calculating the stress levels. Usually the methods for determining stress are divided in two categories. The first category do not require any special equipment for measuring the stress. This category useless the variation in the behaviour patterns that occur while stress. The core disadvantage for the category is their limitation to specific use case. The second category uses laboratories instruments and biological sensors. This category allow to measure stress precisely and proficiently but on the same time they are not mobile and transportable and do not support real-time feedback. This work presents a mobile system that provides the calculation of stress. For achieving this, the of a mobile ECG sensor is analysed, processed and visualised over a mobile system like a smartphone. This work also explains the used stress measurement algorithm. The result of this work is a portable system that can be used with a mobile system like a smartphone as visual interface for reporting the current stress level.
Stress is becoming an important topic in modern life. The influence of stress results in a higher rate of health disorders such as burnout, heart problems, obesity, asthma, diabetes, depressions and many others. Furthermore individual’s behavior and capabilities could be directly affected leading to altered cognition, inappropriate decision making and problem solving skills. In a dynamic and unpredictable environment, such as automotive, this can result in a higher risk for accidents. Different papers faced the estimation as well as prediction of drivers’ stress level during driving. Another important question is not only the stress level of the driver himself, but also the influence on and of a group of other drivers in the near area. This paper proposes a system, which determines a group of drivers in a near area as clusters and it derives the individual stress level. This information will be analyzed to generate a stress map, which represents a graphical view about road section with a higher stress influence. Aggregated data can be used to generate navigation routes with a lower stress influence to decrease stress influenced driving as well as improve road safety.
The fast moving process of digitization1 demands flexibility in order to adapt to rapidly changing business requirements and newly emerging business opportunities. New features have to be developed and deployed to the production environment a lot faster. To be able to cope with this increased velocity and pressure, a lot of software developing companies have switched to a Microservice Architecture (MSA) approach. Applications built this way consist of several fine-grained and heterogeneous services that are independently scalable and deployable. However, the technological and business architectural impacts of microservices based applications directly affect their integration into the digital enterprise architecture. As a consequence, traditional Enterprise Architecture Management (EAM) approaches are not able to handle the extreme distribution, diversity, and volatility of micro-granular systems and services. We are therefore researching mechanisms for dynamically integrating large amounts of microservices into an adaptable digital enterprise architecture.
Data collected from internet applications are mainly stored in the form of transactions. All transactions of one user form a sequence, which shows the user´s behaviour on the site. Nowadays, it is important to be able to classify the behaviour in real time for various reasons: e.g. to increase conversion rate of customers while they are in the store or to prevent fraudulent transactions before they are placed. However, this is difficult due to the complex structure of the data sequences (i.e. a mix of categorical and continuous data types, constant data updates) and the large amounts of data that are stored. Therefore, this thesis studies the classification of complex data sequences. It surveys the fields of time series analysis (temporal data mining), sequence data mining or standard classification algorithms. It turns out that these algorithms are either difficult to be applied on data sequences or do not deliver a classification: Time series need a predefined model and are not able to handle complex data types; sequence classification algorithms such as the apriori algorithm family are not able to utilize the time aspect of the data. The strengths and weaknesses of the candidate algorithms are identified and used to build a new approach to solve the problem of classification of complex data sequences. The problem is thereby solved by a two-step process. First, feature construction is used to create and discover suitable features in a training phase. Then, the blueprints of the discovered features are used in a formula during the classification phase to perform the real time classification. The features are constructed by combining and aggregating the original data over the span of the sequence including the elapsed time by using a calculated time axis. Additionally, a combination of features and feature selection are used to simplify complex data types. This allows catching behavioural patterns that occur in the course of time. This new proposed approach combines techniques from several research fields. Part of the algorithm originates from the field of feature construction and is used to reveal behaviour over time and express this behaviour in the form of features. A combination of the features is used to highlight relations between them. The blueprints of these features can then be used to achieve classification in real time on an incoming data stream. An automated framework is presented that allows the features to adapt iteratively to a change in underlying patterns in the data stream. This core feature of the presented work is achieved by separating the feature application step from the computational costly feature construction step and by iteratively restarting the feature construction step on the new incoming data. The algorithm and the corresponding models are described in detail as well as applied to three case studies (customer churn prediction, bot detection in computer games, credit card fraud detection). The case studies show that the proposed algorithm is able to find distinctive information in data sequences and use it effectively for classification tasks. The promising results indicate that the suggested approach can be applied to a wide range of other application areas that incorporate data sequences.
Social networks, smart portable devices, Internet of Things (IoT) on base of technologies like analytics for big data and cloud services are emerging to support flexible connected products and agile services as the new wave of digital transformation. Biological metaphors of living and adaptable ecosystems with service-oriented enterprise architectures provide the foundation for self-optimizing and resilient run-time environments for intelligent business services and related distributed information systems. We are extending Enterprise Architecture (EA) with mechanisms for flexible adaptation and evolution of information systems having distributed IoT and other micro-granular digital architecture to support next digitization products, services, and processes. Our aim is to support flexibility and agile transformation for both IT and business capabilities through adaptive digital enterprise architectures. The present research paper investigates additionally decision mechanisms in the context of multi-perspective explorations of enterprise services and Internet of Things architectures by extending original enterprise architecture reference models with state of art elements for architectural engineering and digitization.
In times of dynamic markets, enterprises have to be agile to be able to quickly react to market influences. Due to the increasing digitization of products, the enterprise IT often is affected when business models change. Enterprise Architecture Management (EAM) targets a holistic view of the enterprise’ IT and their relations to the business. However, Enterprise Architectures (EA) are complex structures consisting of many layers, artifacts and relationships between them. Thus, analyzing EA is a very complex task for stakeholders. Visualizations are common vehicles to support analysis. However, in practice visualization capabilities lack flexibility and interactivity. A solution to improve the support of stakeholders in analyzing EAs might be the application of visual analytics. Starting from a systematic literature review, this article investigates the features of visual analytics relevant for the context of EAM.
The Eighth International Conference on Advances in Databases, Knowledge, and Data Applications (DBKDA 2016), held between June 26 - 30, 2016 - Lisbon, Portugal, continued a series of international events covering a large spectrum of topics related to advances in fundamentals on databases, evolution of relation between databases and other domains, data base technologies and content processing, as well as specifics in applications domains databases. Advances in different technologies and domains related to databases triggered substantial improvements for content processing, information indexing, and data, process and knowledge mining. The push came from Web services, artificial intelligence, and agent technologies, as well as from the generalization of the XML adoption. High-speed communications and computations, large storage capacities, and load-balancing for distributed databases access allow new approaches for content processing with incomplete patterns, advanced ranking algorithms and advanced indexing methods. Evolution on e-business, ehealth and telemedicine, bioinformatics, finance and marketing, geographical positioning systems put pressure on database communities to push the ‘de facto’ methods to support new requirements in terms of scalability, privacy, performance, indexing, and heterogeneity of both content and technology.
Die Kombination von Softwareproduktlinien und agiler Softwareentwicklung in der Automobilbranche ist vielversprechend. Das Ziel ist hierbei, sowohl die Vorteile agiler Methoden wie kurze Entwicklungszyklen als auch die Vorteile systematischer Wiederverwendung wie beispielsweise das effektive Management von Varianten zu erzielen. Allerdings ist die Kombination auch mit Herausforderungen verbunden und erfordert eine geeignete Einführungs- oder Transformationsstrategie. Basierend auf Erkenntnissen einer Interviewstudie und existierenden Produktlinienentwicklungen werden Herausforderungen und Lösungsideen aufgezeigt.
Analysis of multicellular patterns is required to understand tissue organizational processes. By using a multi-scale object oriented image processing method, the spatial information of cells can be extracted automatically. Instead of manual segmentation or indirect measurements, such as general distribution of contrast or flow, the orientation and distribution of individual cells is extracted for quantitative analysis. Relevant objects are identified by feature queries and no low-level knowledge of image processing is required.
Sleep is an important aspect in life of every human being. The average sleep duration for an adult is approximately 7 h per day. Sleep is necessary to regenerate physical and psychological state of a human. A bad sleep quality has a major impact on the health status and can lead to different diseases. In this paper an approach will be presented, which uses a long-term monitoring of vital data gathered by a body sensor during the day and the night supported by mobile application connected to an analyzing system, to estimate sleep quality of its user as well as give recommendations to improve it in real-time. Actimetry and historical data will be used to improve the individual recommendations, based on common techniques used in the area of machine learning and big data analysis.
Saving energy and protecting the environment became fundamental for society and politics, why several laws were enacted to increase the energy-efficiency. Furthermore, the growing number of vehicles and drivers leaded to more accidents and fatalities on the roads, why road safety became an important factor as well. Due to the increasing importance of energy-efficiency and safety, car manufacturers started to optimise the vehicle in terms of energy-effciency and safety. However, energy-efficiency and road safety can be also increased by adapting the driving behaviour to the given driving situation. This thesis presents a concept of an adaptive and rule based driving system that tries to educate the driver in energy-efficient and safe driving by showing recommendations on time. Unlike existing driving-systems, the presented driving system considers energy-efficiency and safety relevant driving rules, the individual driving behaviour and the driver condition. This allows to avoid the distraction of the driver and to increase the acceptance of the driving system, while improving the driving behaviour in terms of energy-efficiency and safety. A prototype of the driving system was developed and evaluated. The evaluation was done on a driving simulator using 42 test drivers, who tested the effect of the driving system on the driving behaviour and the effect of the adaptiveness of the driving system on the user acceptance. It has been proven during the evaluation that the energy-efficiency and safety can be increased, when the driving system was used. Furthermore, it has been proven that the user acceptance of the driving system increases when the adaptive feature was turned on. A high user acceptance of the driving system allows a steady usage of the driving system and, thus, a steady improvement of the driving behaviour in terms of energy-efficiency and safety.
Nowadays there is a rich diversity of sleep monitoring systems available on the market. They promise to offer information about sleep quality of the user by recording a limited number of vital signals, mainly heart rate and body movement. Typically, fitness trackers, smart watches, smart shirts, smartphone applications or patches do not provide access to the raw sensor data. Moreover, the sleep classification algorithm and the agreement ratio with the gold standard, polysomnography (PSG) are not disclosed. Some commercial systems record and store the data on the wearable device, but the user needs to transfer and import it into specialised software applications or return it to the doctor, for clinical evaluation of the data set. Thus an immediate feedback mechanism or the possibility of remote control and supervision are lacking. Furthermore, many such systems only distinguish between sleep and wake states, or between wake, light sleep and deep sleep. It is not always clear how these stages are mapped to the four known sleep stages: REM, NREM1, NREM2, NREM3-4. [1] The goal of this research is to find a reduced complexity method to process a minimum number of bio vital signals, while providing accurate sleep classification results. The model we propose offers remote control and real time supervision capabilities, by using Internet of Things (IoT) technology. This paper focuses on the data processing method and the sleep classification logic. The body sensor network representing our data acquisition system will be described in a separate publication. Our solution showed promising results and a good potential to overcome the limitations of existing products. Further improvements will be made and subjects with different age and health conditions will be tested.
In the last decades, several driving systems were developed to improve the driving behaviour in energy efficiency or safety. However, these driving systems cover either the area of energy-efficiency or safety. Furthermore, they do not consider the stress level of the driver when showing a recommendation, although stress can lead to an unsafe or inefficient driving behaviour. In this paper, an approach is presented to consider the driver stress level in a driving system for safe and energy-efficient driving behaviour. The driving system tries to suppress a recommendation when the driver is in stress in order not to stress the driver additionally with recommendations in a stressful driving situation. This can lead to an increase in the road safety and in the user acceptance of the driving system, as the driver is not getting bothered or stressed by the driving system.
The evaluation of the approach showed, that the driving system
is able to show recommendations to the driver, while also reacting
to a high stress level by suppressing recommendations in
order not to stress the driver additionally.
Detecting the adherence of driving rules in an energy-efficient, safe and adaptive driving system
(2016)
An adaptive and rule-based driving system is being developed that tries to improve the driving behavior in terms of the energy-efficiency and safety by giving recommendations. Therefore, the driving system has to monitor the adherence of driving rules by matching the rules to the driving behavior. However, existing rule matching algorithms are not sufficient, as the data within a driving system is changing frequently. In this paper a rule matching algorithm is introduced that is able to handle frequently changing data within the context of the driving system. 15 journeys were used to evaluate the performance of the rule matching algorithms. The results showed that the introduced algorithm outperforms existing algorithms in the context of the driving system. Thus, the introduced algorithm is suited for matching frequently changing data against rules with a higher performance, why it will be used in the driving system for the detection of broken energy-efficiency of safety-relevant driving rules.
Software process improvement (SPI) is around for decades: frameworks are proposed, success factors are studied, and experiences have been reported. However, the sheer mass of concepts, approaches, and standards published over the years overwhelms practitioners as well as researchers. What is out there? Are there new emerging approaches? What are open issues? Still, we struggle to answer the question for what is the current state of SPI and related research? We present initial results from a systematic mapping study to shed light on the field of SPI and to draw conclusions for future research directions. An analysis of 635 publications draws a big picture of SPI-related research of the past 25 years. Our study shows a high number of solution proposals, experience reports, and secondary studies, but only few theories. In particular, standard SPI models are analyzed and evaluated for applicability, especially from the perspective of SPI in small-to-medium-sized companies, which leads to new specialized frameworks. Furthermore, we find a growing interest in success factors to aid companies in conducting SPI.
This summary refers to the paper Software process improvement : where is the evidence? [Ku15].
This paper was published as full research paper in the ICSSP’2015 proceedings.
Context: The current transformation of automotive development towards innovation, permanent learning and adapting to changes are directing various foci on the integration of agile methods. Although, there have been efforts to apply agile methods in the automotive domain for many years, a wide-spread adoption has not yet taken place.
Goal: This study aims to gain a better understanding of the forces that prevent the adoption of agile methods.
Method: Survey based on 16 semi-structured interviews from the automotive domain. The results are analyzed by means of thematic coding.
Results: Forces that prevent agile adoption are mainly of organizational, technical and social nature and address inertia, anxiety and context factors. Key challenges in agile adoption are related to transforming organizational structures and culture, achieving faster software release cycles without loss of quality, the importance of software reuse in combination with agile practices, appropriate quality assurance measures, and the collaboration with suppliers and other disciplines such as mechanics.
Conclusion: Significant challenges are imposed by specific characteristics of the automotive domain such as high quality requirements and many interfaces to surrounding rigid and inflexible processes. Several means are identified that promise to overcome these challenges.
Context: Companies need capabilities to evaluate the customer value of software intensive products and services. One way of systematically acquiring data on customer value is running continuous experiments as part of the overall development process. Objective: This paper investigates the first steps of transitioning towards continuous experimentation in a large company, including the challenges faced. Method: We conduct a single-case study using participant observation, interviews, and qualitative analysis of the collected data. Results: Results show that continuous experimentation was well received by the practitioners and practising experimentation helped them to enhance understanding of their product value and user needs. Although the complexities of a large multi-stakeholder business to-business (B2B) environment presented several challenges such as inaccessible users, it was possible to address impediments and integrate an experiment in an ongoing development project. Conclusion: Developing the capability for continuous experimentation in large organisations is a learning process which can be supported by a systematic introduction approach with the guidance of experts. We gained experience by introducing the approach on a small scale in a large organisation, and one of the major steps for future work is to understand how this can be scaled up to the whole development organisation.
Software Process Improvement (SPI) programs have been implemented, inter alia, to improve quality and speed of software development. SPI addresses many aspects ranging from individual developer skills to entire organizations. It comprises, for instance, the optimization of specific activities in the software lifecycle as well as the creation of organizational awareness and project culture. In the course of conducting a systematic mapping study on the state-of-the-art in SPI from a general perspective, we observed Software Quality Management (SQM) being of certain relevance in SPI programs. In this paper, we provide a detailed investigation of those papers from the overall systematic mapping study that were classified as addressing SPI in the context of SQM (including testing). From the main study’s result set, 92 papers were selected for an in-depth systematic review to study the contributions and to develop an initial picture of how these topics are addressed in SPI. Our findings show a fairly pragmatic contribution set in which different solutions are proposed, discussed, and evaluated. Among others, our findings indicate a certain reluctance towards standard quality or (test) maturity models and a strong focus on custom review, testing, and documentation techniques, whereas a set of five selected improvement measures is almost equally addressed.
A software process is the game plan to organize project teams and run projects. Yet, it still is a challenge to select the appropriate development approach for the respective context. A multitude of development approaches compete for the users’ favor, but there is no silver bullet serving all possible setups. Moreover, recent research as well as experience from practice shows companies utilizing different development approaches to assemble the best-fitting approach for the respective company: a more traditional process provides the basic framework to serve the organization, while project teams embody this framework with more agile (and/or lean) practices to keep their flexibility. The paper at hand provides insights into the HELENA study with which we aim to investigate the use of “Hybrid dEveLopmENt Approaches in software systems development”. We present the survey design and initial findings from the survey’s test runs. Furthermore, we outline the next steps towards the full survey.
Software development consists to a large extent of human-based processes with continuously increasing demands regarding interdisciplinary team work. Understanding the dynamics of software teams can be seen as highly important to successful project execution. Hence, for future project managers, knowledge about non-technical processes in teams is significant. In this paper, we present a course unit that provides an environment in which students can learn and experience the role of different communication patterns in distributed agile software development. In particular, students gain awareness about the importance of communication by experiencing the impact of limitations of communication channels and the effects on collaboration and team performance. The course unit presented uses the controlled experiment instrument to provide the basic organization of a small software project carried out in virtual teams. We provide a detailed design of the course unit to allow for implementation in further courses. Furthermore, we provide experiences obtained from implementing this course unit with 16 graduate students. We observed students struggling with technical aspects and team coordination in general, while not realizing the importance of communication channels (or their absence). Furthermore, we could show the students that lacking communication protocols impact team coordination and performance regardless of the communication channels used.