Refine
Year of publication
- 2018 (190) (remove)
Document Type
- Journal article (79)
- Conference proceeding (78)
- Book chapter (19)
- Book (5)
- Doctoral Thesis (4)
- Working Paper (2)
- Anthology (1)
- Patent / Standard / Guidelines (1)
- Issue of a journal (1)
Language
- English (190) (remove)
Is part of the Bibliography
- yes (190)
Institute
- Informatik (64)
- ESB Business School (39)
- Technik (37)
- Life Sciences (26)
- Texoversum (24)
Publisher
- IEEE (37)
- Springer (37)
- Elsevier (17)
- RWTH Aachen (8)
- LIT Verlag (7)
- MDPI (7)
- De Gruyter (4)
- MIT Center for Information Systems Research (4)
- Association for Computing Machinery (3)
- Gesellschaft für Informatik e.V (3)
Boost converters suffer from a bandwidth limitation caused by the right-half plane zero (RHPZ), which occurs in the control-to-output transfer function. In contrast, there are many applications that require superior dynamic behavior. Further, size and cost of boost converter systems can be minimized by reduced voltage deviations and fast transient responses in case of large signal load transients. The key idea of the proposed ΔV/Δt-intervention control concept is to adapt the controller output to its new steady state value immediately after a load transient by prediction from known parameters. The concept is implemented in a digital control circuit, consisting of an ASIC in a 110 nm-technology and a Xilinx Spartan-6 field programmable gate array (FPGA). In a boost converter with 3.5V input voltage, 6.3V output voltage, 1.2A load, and 500 kHz switching frequency, the output voltage deviations are 2.8x smaller, scaling down the output capacitor value by the same factor. The recovery times are 2.4x shorter in case of large signal load transients with the proposed concept. The control is widely applicable, as it supports constant switching frequencies and allows for duty cycle and inductor current limitations. It also shows various advantages compared to conventional control and to selected adaptive control concepts.
This paper introduces a highly scalable heteromodular origami art technique for constructing 3D framework structures using elementary struts and connectors folded from uncut sheets of standard A4 office paper. The presented technique, named ZEBRA, allows the design of meter-scale architectural objects, such as truss bridges and towers, which are capable of bearing substantial mechanical loads. Moving parts, ranging from simple levers to complete multi-bar linkages, can be integrated into static frameworks using a set of kinematic extensions. An overview is given of how the ZEBRA system can be used to teach university students various theoretical and practical aspects of the engineering sciences in an entertaining and hands-on way.
Workshops and tutorials
(2018)
The 19th International Conference on Product-Focused Software Process Improvement (PROFES 2018) hosted two workshops and three tutorials. The workshops and tutorials complemented and enhanced the main conference program, offering a wider knowledge perspective around the conference topics. The topics of the two workshops were Hybrid Development Approaches in Software Systems Development (HELENA) and Managing Quality in Agile & Rapid Software Development Processes (QUaSD). The topics of the tutorials were The human factor in agile transitions – using the personas concept in agile oaching, Process Management 4.0 – Best Practices, and Domain-specific languages for specification, development, and testing of autonomous systems.
Objective: This paper aims at getting an understanding of current problems and challenges with roadmapping processes in companies that are facing volatile markets with innovative products. It also aims at gathering ideas and attempts on how to react to those challenges.
Method: As an initial step towards the objectice a semi-structured expert interview study with a case company in the Smart Home domain was conducted. Four employees from the case company with different roles around product roadmaps have been interviewed and a content analysis of the data has been performed.
Results: The study shows a significant consensus among the interviewees about several major challenges and the necessity to change the traditional roadmapping process and format. The interviewees stated that based on their experience traditional feature-based product roadmaps are increasingly losing their benefits (such as good planning certainty) in volatile environments. Furthermore, the ability to understand customer needs and behaviors has become highly important for creating and adjusting product roadmaps. The interviewees see the need for both, sufficiently stable goals on the roadmap and flexibility with respect to products or features to be developed. To reach this target the interviewees proposed to create roadmaps based on outcome goals instead of product features. In addition, it was proposed to decrease the level of detail of the roadmaps and to emphasize the long-term view. Decisions about which feature to develop should be open as long as possible. Expected benefits of such a new way of product roadmapping are higher user centricity, a stable overall direction, more flexibility with respect to development decisions, and less breaking of commitments.
Rapid prototyping platforms reduce development time by allowing quick prototyping of a prototype idea and achieve more time for actual application development with user interfaces. This approach has long been followed in technical platforms, such as the Arduino. To transfer this form of prototyping to wearables, WearIT is presented in this paper.WearIT consists of four components as a wearable prototyping platform: (1) a vest, (2) sensor and actuator shields, (3) its own library and (4) a motherboard consisting of Arduino, Raspberry Pi, a board and a GPS module. As a result, a wearable prototype can be quickly developed by attaching sensor and actuator shields to the WearIT vest. These sensor and actuator shields can then be programmed through the WearIT library. Via Virtual Network Computing (VNC) with a remote computer, the screen contents of the Raspberry Pi can be accessed and the Arduino be programmed.
Small Island Developing States (SIDS) face tension between economic growth and environmental impact. Tourism fuels growth, but the resulting solid waste and other pollutants threaten the SIDS’ natural beauty, quality of life for residents, attractiveness to tourists, and economic success. We assess the tension between tourism-driven economic growth and environmental degradation from a limits-to-growth perspective, developing a generic system dynamics model of the problem using 38 years of data from the Maldives to estimate parameters and Monte-Carlo methods to assess the sensitivity of results to uncertainty. We contrast development paths for the next three decades under three sets of policies focusing on promoting growth, managing tourism demand–supply balance, and improving waste management. Findings are counterintuitive; policies focused on better waste management alone are self defeating, because they increase tourism, growth and waste generation, undermining attractiveness and growth later. Policies that limit tourism demand improve economic and environmental health.
Digital Enterprise Architecture allows multiple viewpoints on a company’s IT landscape. To gain valuable information out of huge amounts of operational data, it is indispensable to have both an understanding of the operations architecture and an engine capable of managing Big Data. The mechanism of understanding huge amounts of data is based on three main steps: collect, process and use. The main idea is focused on extracting valuable information out of Big Data to make better design decisions. The Elastic Stack is an open-source solution to comfortably and quickly handle Big Data scenarios.
This article investigates the fundamental value of digital platforms, such as Facebook and Google. Despite the transformative nature of digital technologies, it is challenging to value digital services, given that the usage is free of charge. Applying the methodology of discrete choice experiments, we estimated the value of digital free goods. For the first time in the literature, we obtained data for the willingness-to-pay and willingness-to-accept, together with socio-economic variables. The customer´s valuation of free digital services is on average, for Google, 121 € per week and Facebook, 28 €.
Recognizing actions of humans, reliably inferring their meaning and being able to potentially exchange mutual social information are core challenges for autonomous systems when they directly share the same space with humans. Today’s technical perception solutions have been developed and tested mostly on standard vision benchmark datasets where manual labeling of sensory ground truth is a tedious but necessary task. Furthermore, rarely occurring human activities are underrepresented in such data leading to algorithms not recognizing such activities. For this purpose, we introduce a modular simulation framework which offers to train and validate algorithms on various environmental conditions. For this paper we created a dataset, containing rare human activities in urban areas, on which a current state of the art algorithm for pose estimation fails and demonstrate how to train such rare poses with simulated data only.
Context: Organizations increasingly develop software in a distributed manner. The cloud provides an environment to create and maintain software-based products and services. Currently, it is unknown which software processes are suited for cloud-based development and what their effects in specific contexts are.
Objective: We aim at better understanding the software process applied to distributed software development using the cloud as development environment. We further aim at providing an instrument which helps project managers comparing different solution approaches and to adapt team processes to improve future project activities and outcomes.
Method: We provide a simulation model which helps analyzing different project parameters and their impact on projects performed in the cloud. To evaluate the simulation model, we conduct different analyses using a Scrumban process and data from a project executed in Finland and Spain. An extra adaptation of the simulation model for Scrum and Kanban was used to evaluate the suitability of the simulation model to cover further process models.
Results: A comparison of the real project data with the results obtaind from the different simulation runs shows the simulation producing results close to the real data, and we could successfully replicate a distributed software project. Furthermore, we could show that the simulation model is suitable to address further process models.
Conclusion: The simulator helps reproducing activities, developers, and events in the project, and it helps analyzing potential tradeoffs, e.g., regarding throughput, total time, project size, team size and work-in-progress limits. Furthermore, the simulation model supports project managers selecting the most suitable planning alternative thus supporting decision-making processes.
Engineers of the research project “Digital Product Life-Cycle” are using a graph-based design language to model all aspects of the product they are working on. This abstract model is the base for all further investigations, developments and implementations. In particular at early stages of development, collaborative decision making is very important. We propose a semantic augmented knowledge space by means of mixed reality technology, to support engineering teams. Therefore we present an interaction prototype consisting of a pico projector and a camera. In our usage scenario engineers are augmenting different artefacts in a virtual working environment. The concept of our prototype contains both an interaction and a technical concept. To realise implicit and natural interactions, we conducted two prototype tests: (1) A test with a low-fidelity prototype and (2) a test by using the method Wizard of Oz. As a result, we present a prototype with interaction selection using augmentation spotlighting and an interaction zoom as a semantic zoom.
This research addresses the question of why employees use enterprise social networks (ESN). Against the background of technology acceptance research, we propose an extended unified theory of acceptance and use of technology (UTAUT) model, adapt it to an ESN context, and test our model against data from ESN users of large and medium-sized enterprises. We use partial least squares structural equation modeling to gain insights into the determinants of ESN use. This paper contributes to ESN acceptance research by evaluating a model containing determinants of ESN use. It also examines the effects of determinants on five different usage dimensions of ESN. The results reveal that facilitating conditions are the main driver of ESN use while the impact of intention to use is comparably small. Implications for theory and practice are discussed.
The unprecedented acceleration in the dynamics of economic development and its dependence on global interactions makes predicting the future especially difficult. Nevertheless, an examination of long-term trends provides an opportunity to begin a discussion about what reality could await us tomorrow and how we want to deal with it. With this food-for-thought paper, the member institutes of the Fraunhofer Group for Innovation Research wish to present a selection of the trends that are destined to have a significant impact on innovation systems in the period leading up to 2030. Based on these trends, the paper derives theses for innovation in the year 2030 and describes the resulting tasks for business, politics, science and society.
Motor-based theories of facial expression recognition propose that the visual perception of facial expression is aided by sensorimotor processes that are also used for the production of the same expression. Accordingly, sensorimotor and visual processes should provide congruent emotional information about a facial expression. Here, we report evidence that challenges this view. Specifically, the repeated execution of facial expressions has the opposite effect on the recognition of a subsequent facial expression than the repeated viewing of facial expressions. Moreover, the findings of the motor condition, but not of the visual condition, were correlated with a nonsensory condition in which participants imagined an emotional situation. These results can be well accounted for by the idea that facial expression recognition is not always mediated by motor processes but can also be recognized on visual information alone.
Digital transformation has changed corporate reality and, with that, firms’ IT environments and IT governance (ITG). As such, the perspective of ITG has shifted from the design of a relatively stable, closed and controllable system of a self-sufficient enterprise to a relatively fluid, open, agile and transformational system of networked co adaptive entities. Related to this paradigm shift in ITG, this paper aims to clarify how the concept of an effective ITG framework has changed in terms of the demand for agility in organizations. Thus, this study conducted 33 qualitative interviews with executives and senior managers from the banking industry in Germany, Switzerland and Austria. Analysis of the interviews focused on the formation of categories and the assignment of individual text parts (codings) to these categories to allow for a quantitative evaluation of the codings per category. Regarding traditional and agile ITG dimensions, 22 traditional and 25 agile dimensions were identified. Moreover, agile strategies within the agile ITG construct and ten ITG patterns were identified from the interview data. The data show relevant perspectives on the implementation of traditional and new ITG dimensions and highlight ambidextrous aspects in ITG frameworks.
While there are several theoretical comparisons of Object Orientation (OO) and Service Orientation (SO), little empirical research on the maintainability of the two paradigms exists. To provide support for a generalizable comparison, we conducted a study with four related parts. Two functionally equivalent systems (one OO and one SO version) were analyzed with coupling and cohesion metrics as well as via a controlled experiment, where participants had to extend the systems. We also conducted a survey with 32 software professionals and interviewed 8 industry experts on the topic. Results indicate that the SO version of our system possesses a higher degree of cohesion, a lower degree of coupling, and could be extended faster. Survey and interview results suggest that industry sees systems built with SO as more loosely coupled, modifiable, and reusable. OO systems, however, were described as less complex and easier to test.
Purpose: This study aims to conceptualize and test the effect of consumers´ perceptions of complaint handling quality (PCHQ) in both traditional and social media channels.
Design/methodology/approach: Study 1 systematically reviews the relevant literature and then carries out a consumer and manager survey. This approach aims to conceptualize the dimensionality of PCHQ. Study 2 tests the effect of PCHQ on key marketing outcomes. Using survey data from a German telecommunications company, the study provides an explanation for the differences in outcomes across traditional (hotline) and social media channels.
Findings: Study 1 reveals that PCHQ is best conceptualized as a five dimensional construct with 15 facets. There are significant differences between customers and managers in terms of the importance attached to the various dimensions. The construct shows strong psychometric properties with high reliability and validity, thereby opening up opportunities to treat these facets as measurement indicators for the construct. Study 2 indicates that the effect of PCHQ on consumer loyalty and word-of-mouth (WOM) communication is stronger in social media than in traditional channels. Procedural justice and the overall quality of service solutions emerge as general dimensions of PCHQ because they are equally important in both channels. In contrast, interactional justice, distributive justice and customer effort have varying effects across the two channels.
Research limitations/implications: This study contributes to the understanding of a firm´s channel selection for complaint handling in two ways. First, it evaluates and conceptualizes the PCHQ construct. Second, it compares the effects of different dimensions of PCHQ on key marketing outcomes across traditional and socialmedia channels.
Practical implications: This study enables managers to understand the difference in efficacy attached to different dimensions of PCHQ. It further highlights such differences across traditional and social media service channels. For example, the effect of complaint handling on social media is of particular importance when generating WOM communication.
Originality/value: This study offers a comprehensive conceptualization of the PCHQ construct and reveals the general and channel contingent effects of its different dimensions on key marketing outcomes.
Container virtualization evolved into a key technology for deployment automation in line with the DevOps paradigm. Whereas container management systems facilitate the deployment of cloud applications by employing container based artifacts, parts of the deployment logic have been applied before to build these artifacts. Current approaches do not integrate these two deployment phases in a comprehensive manner. Limited knowledge on application software and middleware encapsulated in container-based artifacts leads to maintainability and configuration issues. Besides, the deployment of cloud applications is based on custom orchestration solutions leading to lock in problems. In this paper, we propose a two-phase deployment method based on the TOSCA standard. We present integration concepts for TOSCA-based orchestration and deployment automation using container-based artifacts. Our two-phase deployment method enables capturing and aligning all the deployment logic related to a software release leading to better maintainability. Furthermore, we build a container management system, which is composed of a TOSCA-based orchestrator on Apache Mesos, to deploy container-based cloud applications automatically.
Mature economies which are driven mainly by small and medium sized enterprises (SMEs) are increasingly becoming dependent on material imports. Global material consumption is ever increasing, mainly driven by population increases. Decoupling of material consumption from economic growth is one of the greatest challenges of the 21st century. Within this paper available methods for the assessment of material efficiency on different economic scales are investigated and those detected that are particulary suitable for the use in SMEs. Recommendations for further improvements of the selected tools and an outlook concerning planned research activities in the field of material efficiency in enterprises, supply chains and circular economy aspects are given.
This paper investigates if food ^ retailing mobile applications from Germany, Austria, USA and the United Kingdom are meant to stay a marginal topic in grocery shopping, or if they have the potential to significantly shape the future of grocery retailing by serving as competitive advantages that can fulfil customer requirements and satisfaction. It has filtered out success factors in form of functions of grocery apps and it has extracted key competencies that can be used to create customer value. The Kano model can help selecting the right app functions. But, there are other prerequisites, like customers’ general attitude towards technology and their acceptance towards any kind of apps, that play an important role looking at the big picture of apps in grocery retailing. However, this paper has contributed one vital part of giving more importance to apps in grocery retailing in form of app functions that clearly deliver customer value. In short, apps that fit customers’ needs and that provide usability and convenience clearly have the potential to shape the future of grocery retailing - if key barriers towards app use are eliminated and if incentives are given that overcome scepticism.
Implementation of product-service systems (PSS) requires structural changes in the way that business in manufacturing industries is traditionally conducted. Literature frequently mentions the importance of human resource management (HRM), since people are involved in the entire process of PSS development and employees are the primary link to customers. However, to this day, no study has provided empirical evidence whether and in what way HRM of firms that implement PSS differs from HRM of firms that solely run a traditional manufacturing based business model. The aim of this study is to contribute to closing this gap by investigating the particular HR components of manufacturing firms that implement PSS and compare it with the HRM of firms that do not. The context of this study is the fashion industry, which is an ideal setting since it is a mature and highly competitive industry that is well-documented for causing significant environmental impact. PSS present a promising opportunity for fashion firms to differentiate and mitigate the industry’s ecological footprint. Analysis of variance (ANOVA) was conducted to analyze data of 102 international fashion firms. Findings reveal a significant higher focus on nearly the entire spectrum of HRM components of firms that implement PSS compared with firms that do not. Empirical findings and their interpretation are utilized to propose a general framework of the role of HRM for PSS implementation. This serves as a departure point for both scholars and practitioners for further research, and fosters the understanding of the role of HRM for managing PSS implementation.
Electromigration (EM) is becoming a progressively severe reliability challenge due to increased interconnect current densities. A shift from traditional (post-layout) EM verification to robust (pro-active) EM aware design - where the circuit layout is designed with individual EM-robust solutions - is urgently needed. This tutorial will give an overview of EM and its effects on the reliability of present and future integrated circuits (ICs). We introduce the physical EM process and present its specific characteristics that can be affected during physical design. Examples of EM countermeasures which are applied in today’s commercial design flows are presented. We show how to improve the EM-robustness of metallization patterns and we also consider mission proiles to obtain application-oriented current density limits. The increasing interaction of EM with thermal migration is investigated as well. We conclude with a discussion of application examples to shift from the current post layout EM verification towards an EM aware physical design process. Its methodologies, such as EM-aware routing, increase the EM-robustness of the layout with the overall goal of reducing the negative impact of EM on the circuit’s reliability.
Perivascular stromal cells, including mesenchymal stem/stromal cells (MSCs), secrete paracrine factor in response to exercise training that can facilitate improvements in muscle remodeling. This study was designed to test the capacity for muscle-resident MSCs (mMSCs) isolated from young mice to release regenerative proteins in response to mechanical strain in vitro, and subsequently determine the extent to which strain-stimulated mMSCs can enhance skeletal muscle and cognitive performance in a mouse model of uncomplicated aging. Protein arrays confirmed a robust increase in protein release at 24 h following an acute bout of mechanical strain in vitro (10%, 1 Hz, 5 h) compared to non-strain controls. Aged (24 month old), C57BL/6 mice were provided bilateral intramuscular injection of saline, non strain control mMSCs, or mMSCs subjected to a single bout of mechanical strain in vitro (4 ×104). No significant changes were observed in muscle weight, myofiber size, maximal force, or satellite cell quantity at 1 or 4 wks between groups. Peripheral perfusion was significantly increased in muscle at 4 wks post-mMSC injection (p < 0.05), yet no difference was noted between control and preconditioned mMSCs. Intramuscular injection of preconditioned mMSCs increased the number of new neurons and astrocytes in the dentate gyrus of the hippocampus compared to both control groups (p < 0.05), with a trend toward an increase in water maze performance noted (p=0.07). Results from this study demonstrate that acute injection of exogenously stimulated muscle-resident stromal cells do not robustly impact aged muscle structure and function, yet increase the survival of new neurons in the hippocampus.
The halo effect in sports
(2018)
A halo effect can lead to significantly biased and distorted judgments in numerous situations and settings in daily life. However, its impact has barely been researched in the sporting environment, although it might help a great deal in understanding how sport fans think and behave. This paper provides an international literature review on the halo effect in different research fields. Built upon this state of the art, an empirical study based on two German soccer clubs, VfB Stuttgart and FC Bayern Munich, analyzes the presence of halo effects explained by social identity theory. The study shows that supporters rate aspects of the respective team, for example the president’s competency, more favorable than common sport spectators, and this effect even increases with a higher level of team identification.
Research and Development (R&D) is crucial for the growth and future success of research-based pharma companies. To maintain their R&D organisations efficient, pharmaceutical companies started to hedge the potential of open innovation to cut R&D costs and to access external knowledge. These new strategies could be divided into several categories: open source, innovation centres, crowd sourcing and virtual R&D.
PI Chile, a subsidiary of the Principal Financial Group, adopted a new digital vision in 2017 and initiated a transformation of the company with the goal of using digital offerings to help many more customers reach their financial goals. To do this, PI Chile had to wrap its legacy applications in APIs, build a reusable digital platform for the new offerings, and learn what kinds of tools and information customers would and could use. In addition, PI Chile was experimenting with entirely new ways of working for those staff who were developing the new offerings. The company's new accountability framework sought to empower teams to make key decisions quickly. In a short time, PI Chile was well on its way to becoming designed for digital.
Early reduction of risks in a startup or an innovation project is highly important. Appropriate means for risk reduction, such as testing business models with different kinds of experiments exist. However, deciding what to test and how to select the right test, is challenging for many startups and innovation projects. This article presents the so-called Business Experiments Navigator (BEN), a toolkit to assist startup and innovation processes. It compliments other tools such as the Business Model Canvas or the Lean Startup process. The main contribution of BEN is to bridge the gap between the riskiest assumptions of a business model and the multitude of available testing techniques by providing assumption templates. The Business Experiments Navigator has been validated in several workshops. Results show that it creates awareness among the workshop participants that a business model is based on assumptions which impose risks and need to be validated. Further, users of BEN were able to identify relevant assumptions and map different kinds of assumptions to appropriate testing techniques. The process applied in the workshops, as well as the assumption templates, helped the participants understand the main concepts and transfer their learnings, to their own business ideas.
Digital transformation has changed corporate reality and, with that, firms’ IT environments and IT governance (ITG). As such, the perspective of ITG has shifted from the design of a relatively stable, closed and controllable System of a self-sufficient Enterprise to a relatively fluid, open, agile and transformational system of networked co-adaptive entities. Related to this paradigm shift in ITG, this paper aims to clarify how the concept of an effective ITG framework has changed in terms of the demand for agility in organizations. Thus, this study conducted 33 qualitative interviews with executives and senior managers from the banking industry in Germany, Switzerland and Austria. Analysis of the interviews focused on the formation of categories and the assignment of individual text parts (codings)
to these categories to allow for a quantitative evaluation of the codings per category. Regarding traditional and agile ITG dimensions, 22 traditional and 25 agile dimensions in terms of structures, processes and relational mechanisms were identified. Moreover, agile strategies within the agile ITG construct and ten ITG patterns were identified from the interview data. The data show relevant perspectives on the implementation of traditional and new ITG dimensions and highlight ambidextrous aspects in ITG in the German-speaking banking industry.
Being able to monitor the heart activity of patients during their daily life in a reliable, comfortable and affordable way is one main goal of the personalized medicine. Current wearable solutions lack either on the wearing comfort, the quality and type of the data provided or the price of the device. This paper shows the development of a Textile Sensor Platform (TSP) in the form of an electrocardiogram (ECG)-measuring T-shirt that is able to transmit the ECG signal to a smartphone. The development process includes the selection of the materials, the design of the textile electrodes taking into consideration their electrical characteristics and ergonomy, the integration of the electrodes on the garment and their connection with the embedded electronic part. The TSP is able to transmit a real-time streaming of the ECG-signal to an Android smartphone through Bluetooth Low Energy (BLE). Initial results show a good electrical quality in the textile electrodes and promising results in the capture and transmission of the ECG signal. This is still a working- progress and it is the result of an interdisciplinary master project between the School of Informatics and the School of Textiles & Design of the Reutlingen University.
Creating new business models, products or services is challenging in fast changing unpredictable environments. Often, product teams need to make many assumptions (e.g., assumptions about future demands) that might not be true. These assumptions impose risks to the success and these risks need to be mitigated early. One of the principles of the Lean Startup approach is to identify and prioritize the riskiest assumptions in order to validate them as early as possible. This helps to avoid wasting effort and time. In the literature there are several different methods for identifying and prioritizing the riskiest assumptions reported. However, only little research exists about the practical application of these methods in practice and how to teach them. In this paper, we present and empirically analyze a workshop format that we have developed for teaching the prioritization of Lean Startup assumptions. We aim at raising the awareness for assumption thinking among the participants and teach them through group work how to prioritize assumptions. The results of the analysis of a multitude of conducted workshops show that the applied method did lead to reasonable results and accompanying learning effects. In addition, the participants got aware of assumption thinking and liked learning in a practical way.
In order to decouple economic growth from global material consumption it is necessary to implement material efficiency strategies at the level of single enterprises and their supply chains, and to implement circular economy aspects. Manufacturing firms face multiple implementation challenges like cost limitations, competition, innovation and stakeholder pressure, and supplier and customer relationships, among others
. An extended evaluation of triggers and barriers to improve material efficiency in manufacturing companies, along the supply chain and concerning circular economy considerations is provided. This paper delivers an extended literature review, a critical discussion of the current situation and resulting challenges concerning material efficiency approaches in manufacturing supply chains. Finally, a conclusion and outlook on further research direction is given.
In this exploratory research eight suppliers in the automotive industry are interviewed to measure the application of supply chain finance instruments in their supply chain in the Netherlands and the region of South-West Germany. Current adoption levels and reasons for non adoption are discussed. Based on these indicative results, a set of hypotheses is suggested for further research. The theoretical base of this study is a conceptual model of Supply Chain Finance based on literature research and empirical research in the Netherlands.
The current paper studies the influence of geometrical parameters of the fused deposition modeling (FDM) - fused filament fabrication (FFF) 3D printing process on printed part strength for open source desktop 3D printers and the most popular material used for that purpose - i.e., polylactic acid (PLA). The study was conducted using a set of different nozzles (0.4, 0.6, and 0.8 mm) and a range of layer heights from the minimum to maximum physical limits of the machine. To assess print strength, a novel assessment method is proposed. A tubular sample is loaded in the weakest direction (across layers) in a three point bending fixture. Mesostructure evaluation through scanning electronic microscopy (SEM) scans of the samples was used to explain the obtained results. We detected a significant influence of geometric process parameters on sample mesostructure, and consequently, on sample strength.
Micro grids often consist of energy generators, storages and consumers with controllers which are not prepared for their integration into communication networks for energy systems. In this paper it will be presented, how standards from the field of energy automation can be applied in such controllers. The data for communication interfaces can be structured according to the IEC 61850- or the VHPREADY standard. It is investigated which requirements must be supported to implement such data models within the controllers. For the transmission of the data we propose the OPC UA protocol, which supports extensive security measures and which is today available for nearly all modern types of controllers and computers.
Sole value – the sneaker resale market :
an explorative analysis of the sneaker resale market
(2018)
The purpose of this explorative research paper is to examine the sneaker resale market and its typical processes in order to give a comprehensive overview over the secondary market for limited edition sneakers. Hypotheses are presented that will be analysed with the empirical research methods of expert interviews and sales data analysis. Amongst other findings, this paper shows that there is a complementary relationship between sneaker brands and the resale market; that product limitation is essential for value increases; that collaborations are necessary for sneaker brands to be relevant on the resale market and that the market is very fragmented. All combined circumstances described in this paper explain the sneaker resale market and its processes. Additionally, some outlooks on the future will be given with the help of expert interviewees and current developments on the market will be discussed.
The very first International Workshop on Software-intensive Business: Start-ups, Ecosystems and Platforms (SiBW 2018) was held in Espoo (Greater Helsinki), Finland on December 3rd, 2018 – just a day before SLUSH 2018, the world’s biggest startup event. Thanks to the collaboration with the organizers of SLUSH, many of the software-intensive business researchers and practitioners took part also in this event.
The international workshop gathered together 35 registered attendees, from Sweden, Germany, Latvia, Finland, Italy and the Netherlands representing both academia as well as industry. The event itself was sponsored by VTT Technical Research Centre of Finland and the workshop was organized by the newly founded Software-intensive Business research community together with Software Startup Research Network (SSRN).
In current times, a lot of new business opportunities appeared using the potential of the Internet and related digital technologies, like Internet of Things, services computing, cloud computing, big data with analytics, mobile systems, collaboration networks, and cyber physical systems. Enterprises are presently transforming their strategy, culture, processes, and their information systems to become more digital. The digital transformation deeply disrupts existing enterprises and economies. Digitization fosters the development of IT environments with many rather small and distributed structures, like Internet of Things. This has a strong impact for architecting digital services and products. The change from a closed-world modeling perspective to more flexible open-world and living software and system architectures defines the moving context for adaptable and evolutionary software approaches, which are essential to enable the digital transformation. In this paper, we are putting a spotlight to service oriented software evolution to support the digital transformation with micro granular digital architectures for digital services and products.
After considering significant literature on sustainable supply chain management (SSCM), it is evident that research has neglected the social dimension and still lacks in highlighting the role of sourcing intermediaries in supply chains. The apparel supply chain has increased enormously in length and complexity, driving apparel retailers to employ sourcing intermediaries who manage their sourcing activities with suppliers from developing countries overseas. Thus, the purpose of this study is to enrich existing findings on SSCM by exploring the management of social sustainability when sourcing intermediaries are in between the focal company and the respective developing country factories. More specifically, this study aims to understand the role of apparel sourcing intermediaries for the implementation of social management strategies based on the perception of multiple supply chain actors. Qualitative data was collected through semi-structured interviews conducted in Vietnam and Europe. Ultimately ten propositions are presented, all explicitly concentrating on the apparel intermediary’s role as a significant enabler for social sustainability in apparel supply chains. The roles are social sustainability, supplier developer and coordinator, gatekeeper and safeguard, cultural broker, and social risk manager. The social sustainability roles assumed by the apparel sourcing intermediary offer great opportunities to both apparel retailers and developing country factories.
The need for creating digitally enhanced products, services, and experiences as well as the emergence of new or modified business models has a significant impact on the automotive domain. Innovative solutions and new topics such as Smart Mobility or Connectivity require current automotive development processes to undergo major changes. They need to be redesigned in a way that it is possible to learn and adapt continuously at a fast pace. Agile methods are promising approaches to address these new challenges. However, agile methods are not tailored to the specific characteristics of the automotive domain such as software product line (SPLs) development. Although, there have been efforts to apply agile methods in the automotive domain, widespread adoptions have not yet taken place.
As production workspaces become more mobile and dynamic it becomes increasingly important to reliably monitor the overall state of the environment. Therein manipulators or other robotic systems likely have to be able to act autonomously together with humans and other systems within a joint workspace. Such interactions require that all components in non-stationary environments are able to perceive the state relative to each other. As vision-sensors provide a rich source of information to accomplish this, we present RoPose, a convolutional neural network (CNN) based approach, to estimate the two dimensional joint configuration of a simulated industrial manipulator from a camera image. This pose information can further be used by a novel targetless calibration setup to estimate the pose of the camera relative to the manipulator’s space. We present a pipeline to automatically generate synthetic training data and conclude with a discussion of the potential usage of the same pipeline to acquire real image datasets of physically existent robots.
Successful digital business strategies rely less on strategic analysis and big bets than on experiments and learning. Consider, for example, that Airbnb grew out of the belief that people would pay to sleep on air mattress on a stranger's floor. Similarly, Instagram started as an app for checking in and hanging out with friends (and sharing pictures) that proved complicated to use. Twitter's founders had first tried a podcasting platform, Odeo, which Apple made obsolete with iTunes. AUDI AG had to kill of its "share a car with five friends" app before rolling out more successful mobility services in a number of countries. The digital successes did not grow out of a comprehensive upfront analysis. Digital strategy emerges from an idea - often, not a particularly good idea.
In Neurofibromatosis 1 (NF1) germ line loss of function mutations result in reduction of cellular neurofibromin content (NF1+/−, NF1 haploinsufficiency). The Ras-GAP neurofibromin is a very large cytoplasmic protein (2818 AA, 319 kDa) involved in the RAS-MAPK pathway. Aside from regulation of proliferation, it is involved in mechanosensoric of cells. We investigated neurofibromin replacement in cultured human fibroblasts showing reduced amount of neurofibromin. Full length neurofibromin was produced recombinantly in insect cells and purified. Protein transduction into cultured fibroblasts was performed employing cell penetrating peptides along with photochemical internalization. This combination of transduction strategies ensures the intracellular uptake and the translocation to the cytoplasm of neurofibromin. The transduced neurofibromin is functional, indicated by functional rescue of reduced mechanosensoric blindness and reduced RasGAP activity in cultured fibroblasts of NF1 patients or normal fibroblasts treated by NF1 siRNA. Our study shows that recombinant neurofibromin is able to revert cellular effects of NF1 haploinsuffiency in vitro, indicating a use of protein transduction into cells as a potential treatment strategy for the monogenic disease NF1.
Lithographical hotspot (LH) detection using deep learning (DL) has received much attention in the recent years. It happens mainly due to the facts the DL approach leads to a better accuracy over the traditional, state-of-the-art programming approaches. The purpose of ths study is to compare existing data augmentation (DA) techniques for the integrated circuit (IC) mask data using DL methods. DA is a method which refers to the process of creating new samples similar to the training set, thereby helping to reduce the gap between classes as well as improving the performance of the DL system. Experimental results suggest that the DA methods increase overall DL models performance for the hotspot detection tasks.
The paper studies the reform package proposed by the European Commission on 6 December 2017. First, institutional and economic implications of the reform proposal are analysed. The paper finds that some proposals are beyond the present treaty provisions. For instance, the proposal of a fiscal capacity does not tackle the economic root causes without a supranational transfer mechanism. In fact, the proposed budget neutrality over the medium-term is unfeasible due to cross country heterogeneity in the Eurozone. At the end, the paper develops policy conclusions.
Properties data of phenolic resins synthetized for the impregnation of saturating Kraft paper
(2018)
The quality of decorative laminates boards depends on the impregnation process of Kraft papers with a phenolic resin,which constitute the raw materials for the manufacture of the cores of such boards.In the laminates industries,the properties of resins are adapted via their syntheses,usually by mixing phenol and formaldehyde in a batch,where additives,temperature and stirring parameters can be controlled. Therefore, many possibilities of preparation and phenolic resins exist, that leads to different combinations of physico chemical properties. In this article, the properties data of eight phenolic resins synthetized with different parameters of pH and reaction times at 60 °C and 90 °C are presented: the losses of pH after synthesis and the dynamic viscosities measured after synthesis and one the solid content is adjusted to 45%w/w in methanol. Data aquired by Differential Scanning Calorimetry (DSC) of the resins and Inverse Gas Chromatography (IGC) of cured solids are given as well.
Product-Service Systems (PSS) in the fashion industry : an analysis of intra-organizational factors
(2018)
The fashion industry is a vast industry that has grown tremendously over the last decades. This growth causes significant environmental impact since the production of clothes involves high input of energy, water, chemicals and generates great volumes of waste. Even though fashion firms have started to address this challenge by adopting environmental standards, it has turned out that the sole use of eco-friendly material and new manufacturing techniques is insufficient. Instead, sustainable business models are increasingly gaining attention to solve the environmental problems. Offers to rent, swap, repair or redesign clothes are among the most prominent and promising examples. For analytical purposes, these concepts can be assigned to the growing research stream of Product-Service Systems (PSS) that shift the focus from the pure sale of a product toward complementary or substitutional service offers. This decouples customer satisfaction from material consumption, prolongs the garments' lifetime and thus diminishes both material input and appertaining waste. Besides environmental sustainability, PSS imply potential economic benefits for organizations. Particularly in highly competitive industries like the fashion industry, PSS allow firms to differentiate, better compete with cost pressure and mitigate the risk of being imitated by rivels since service is more difficult to replicate. However, fashion PSS are still mainly operated in a niche market by small firms and have yet to be anchored in the mainstream fashion industry.
A shift in attitudes to purchasing departments can be perceived. No longer is the chief goal solely to reduce costs; the procurement function is assuming strategic relevance in the business model, leveraging the supplier as a foundation for innovation. The knowledge accumulated by suppliers is accessed over the journey of long-term partnerships to streamline business practice. Businesses are finding themselves in increasingly competitive environments, and thus need to address inefficiencies in supplier management. “Procurement 4.0” is a concept used in discussing digitalisation in business processes, referring to the process of supplier relationship management and optimisation. This model and its application to supplier relationship management will be the focus of this article. Realising the efficiencies to be obtained in buyer-supplier relationships through “Procurement 4.0” will be explored, primarily through an emphasis on digitalisation of the relationship between the procurement department and supplier.
Pre-clinical evaluation of advanced nerve guide conduits using a novel 3D in vitro testing model
(2018)
Autografts are the current gold standard for large peripheral nerve defects in clinics despite the frequently occurring side effects like donor site morbidity. Hollow nerve guidance conduits (NGC) are proposed alternatives to autografts, but failed to bridge gaps exceeding 3 cm in humans. Internal NGC guidance cues like microfibres are believed to enhance hollow NGCs by giving additional physical support for directed regeneration of Schwann cells and axons. In this study, we report a new 3D in vitro model that allows the evaluation of different intraluminal fibre scaffolds inside a complete NGC. The performance of electrospun polycaprolactone (PCL) microfibres inside 5 mm long polyethylene glycol (PEG) conduits were investigated in neuronal cell and dorsal root ganglion (DRG) cultures in vitro. Z-stack confocal microscopy revealed the aligned orientation of neuronal cells along the fibres throughout the whole NGC length and depth. The number of living cells in the centre of the scaffold was not significantly different to the tissue culture plastic (TCP) control. For ex vivo analysis, DRGs were placed on top of fibre-filled NGCs to simulate the proximal nerve stump. In 21 days of culture, Schwann cells and axons infiltrated the conduits along the microfibres with 2.2 ± 0.37 mm and 2.1 ± 0.33 mm, respectively. We conclude that this in vitro model can help define internal NGC scaffolds in the future by comparing different fibre materials, composites and dimensions in one setup prior to animal testing.
The level of automation in intralogistics has steadily increased over recent years. For small and medium-sized enterprises (SMEs), however, the associated digital change is a major challenge. Since most SMEs are facing increasing sales volumes (e.g. due to e-commerce and good overall economy) in combination with decreasing lot sizes due to the market demand for individualized products, SMEs have to find innovative solutions to cope with these challenges in production as well as in logistics. Innovative technologies, like 3D printing technologies for the production for small lot sizes and future-oriented intralogistics technologies can serve as enablers in logistics to realize flexible logistic processes for increasing market requiremments. Considering that, this paper examines innovative and future-oriented technologies for intralogistics such as smart containers, driverless forklift systems, data glasses, smart shelves and smart pallets regarding their potential for SMEs. This explorative research paper shows that digital technologies are already suitable and available for SMEs.However, challenges are still seen in areas like the identification and digitalization potential and the financing of these new projects. The primary reason escpecially for SMEs for this is that they have to make investments based on an economically feasible payback period and less based on prestigious reasons like digitalization flagship projecs done by large corporations. In addition, the identification of feasible starting points for digitalization within intralogistic systems embedded in specific factory processes is a major challenge not only for SMEs.
Polyelectrolyte multi-layer (PEM) coatings are prepared by alternative deposition of single polyelectrolyte monolayers on charged surfaces using the Layer-by-Layer (LbL) dip coating procedure. These are nanometre scaled coatings which allow fulfilling of different technical or biological requirements. The build-up process is based on selfassembly and self organization of polycations and polyanions on different substrates including complex geometrical structures and even closed volumes, forming homogeneous layer without defects. Depending on the proper selection of the applied polyelectrolytes, coatings with different stabilities can be prepared. Some of the coatings are stable and cannot be removed from the surface. Others are degradable and can be used as systems for controlled local drug delivery. Here we summarise the results of our experience in preparation of PEM coatings with different functionalities. PEM coatings can be used as controllable delivery system for siRNA polyplexes. They can be used to control the adhesion of different cell types on the surfaces and support e.g. the endothelialisation process on cardio-vascular medical devices as e.g. stents or reduce the immunological response of the tissue after implantation. We summarise results from physical characterisation of the coatings (e.g. film thickness, roughness, electrical charge and hydrophilicity) combined with in-vitro biological studies on adhesion of HUVEC cells.
Milk-run systems are becoming more and more popular when it comes to in-plant material supply. Planning and dimensioning such a system poses challenges, which are difficult to overcome, especially in scenarios characterized by a large number of hard constraints and by well-established processes. This paper is set to ease the task of the planner by presenting an innovative flexible method for the planning and dimensioning of in-plant milk-run systems in high constrained scenarios. After an overview on tugger train systems and existing planning methods, an extensive description of the new method will be given. The new method proposed will be critically analyzed and discussed before suggesting forthcoming research.
The appeal of a forklift-free shop floor is pushing enterprises towards lean logistic systems and tugger trains are becoming popular means of supply in intensive material handling production systems. Planning a tugger train system is a complex task influenced by a large set of interrelated parameters. The only standard available to help the planner in designing the tugger train logistic system is the draft norm VDI 5586 (April 2016). However this norm is only applicable under a set of restricting assumptions. In this paper a methodology to complement the approach proposed by the VDI is introduced and then applied to a numerical example. The results are briefly presented and discussed before suggesting forthcoming research.
Perceptual integration of kinematic components in the recognition of emotional facial expressions
(2018)
According to a long-standing hypothesis in motor control, complex body motion is organized in terms of movement primitives, reducing massively the dimensionality of the underlying control problems. For body movements, this low dimensional organization has been convincingly demonstrated by the learning of low-dimensional representations from kinematic and EMG data. In contrast, the effective dimensionality of dynamic facial expressions is unknown, and dominant analysis approaches have been based on heuristically defined facial ‘‘action units,’’ which reflect contributions of individual face muscles. We determined the effective dimensionality of dynamic facial expressions by learning of a low dimensional model from 11 facial expressions. We found an amazingly low dimensionality with only two movement primitives being sufficient to simulate these dynamic expressions with high accuracy. This low dimensionality is confirmed statistically, by Bayesian model comparison of models with different numbers of primitives, and by a psychophysical experiment that demonstrates that expressions, simulated with only two primitives, are indistinguishable from natural ones.
In addition, we find statistically optimal integration of the emotion information specified by these primitives in visual perception. Taken together, our results indicate that facial expressions might be controlled by a very small number of independent control units, permitting very low dimensional parametrization of the associated facial expression.
Bone remodeling can be mimicked in vitro by co-culture models. Based on bone cells, such co-cultures help to study synergistic morphological changes and the impact of materials and applied substances. Hence, we examined the formation of osteoclasts on bovine bone materials to prove the bone resorption functionality of the osteoclasts in three different co-culture set-ups using human monocytes (hMCs) and (I) human mesenchymal stem cells (hMSCs), (II) osteogenic differentiated hMSCs (hOBs), and (III) hOBs in addition of soluble monocyte-colony stimulating factor (M CSF) and cytokine receptor activator of NFkB ligand (RANKL).We detected osteoclast-specific actin morphology, as well as the expression of cathepsin K and CD51/61 in single cells in set-up II and in numerous cells in set-up III. Resorption pits on bone material as characteristic proof of functional osteoclasts were not found in set-up I and II, but we detected such resorption pits in set–up III. We conclude in co culture models without M-CSF and RANKL that monocytes can differentiate into osteoclasts that show the characteristic actin structures and protein expression. However, to receive functional bone resorbing osteoclasts in vitro, the addition of M-CSF and RANKL is needed. Moreover, we suggest the use of bone or bone-like materials for future studies evaluating osteoclastogenesis.
The use of additive manufacturing technologies for industrial production is constantly growing. This technology differs from the known production proecdures. The areas for scheduling, detailed and sequence planning are particularly important for additive production due to the long print times and flexible use of the production area. Therefore, production-relevant variables are considered and used for the production planning and control (PPC) of additive manufacturing machines. For this purpose, an optimization model is presented which shows a time-oriented build space utilization. In the implementation, a nesting algorithm is used to check the combinability of different models for each individual print job.
Historically, research and development (R&D) in the pharmaceutical sector has predominantly been an in-house activity. To enable investments for game changing late-stage assets and to enable better and less costly go/no-go decisions, most companies have employed a fail early paradigm through the implementation of clinical proof-of-concept organizations. To fuel their pipelines, some pioneers started to complement their internal R&D efforts through collaborations as early as the 1990s. In recent years, multiple extrinsic and intrinsic factors induced an opening for external sources of innovation and resulted in new models for open innovation, such as open sourcing, crowdsourcing, public–private partnerships, innovations centres, and the virtualization of R&D. Three factors seem to determine the breadth and depth regarding how companies approach external innovation: (1) the company’s legacy, (2) the company’s willingness and ability to take risks and (3) the company’s need to control IP and competitors. In addition, these factors often constitute the major hurdles to effectively leveraging external opportunities and assets. Conscious and differential choices of the R&D and business models for different companies and different divisions in the same company seem to best allow a company to fully exploit the potential of both internal and external innovations.
The increased availability of data gives rise to the use of machine learning methods for purposes like forecasting or quality control in operations management. Practitioners who want to employ these methods are faced with the task of choosing from a large number of available methods. We give an overview of classification methods and available implementations and present considerations for choosing appropriate methods.
This paper addresses what we call the investment question: under what plausible circumstances, if any, can variable renewable energy (VRE, and solar photovoltaic (PV) in particular) be a good investment? Although VRE has been growing rapidly world-wide, it is generally subsidized. Under what cost and market conditions can solar PV flourish without subsidy? We employ solar insolation and market price data from the U.S. and from Germany to gain insight into the investment question. We find that unsubsidized solar PV is or may soon be a justifiable investment, but that market arrangements may play a crucial role in determining success. We end by sketching a proposal that amounts to a reformed capacity market that would afford participation of solar PV.
Sleep study can be used for detection of sleep quality and in general bed behaviors. These results can helpful for regulating sleep and recognizing different sleeping disorders of human. In comparison to the leading standard measuring system, which is Polysomnography (PSG), the system proposed in this work is a non-invasive sleep monitoring device. For continuous analysis or home use, the PSG or wearable Actigraphy devices tends to be uncomfortable. Besides, these methods not only decrease practicality due to the process of having to put them on, but they are also very expensive. The system proposed in this paper classifies respiration and body movement with only one type of sensor and also in a noninvasive way. The sensor used is a pressure sensor. This sensor is low cost and can be used for commercial proposes. The system was tested by carrying out an experiment that recorded the sleep process of a subject. These recordings showed excellent results in the classification of breathing rate and body movements.
Modern persistent Key/Value stores are designed to meet the demand for high transactional throughput and high data ingestion rates. Still, they rely on backwards-compatible storage stack and abstractions to ease space management, foster seamless proliferation and system integration. Their dependence on the traditional I/O stack has negative impact on performance, causes unacceptably high write-amplification, and limits the storage longevity.
In the present paper we present NoFTL KV, an approach that results in a lean I/O stack, integrating physical storage management natively in the Key/Value store. NoFTL-KV eliminates backwards compatibility, allowing the Key/Value store to directly consume the characteristics of modern storage technologies. NoFTLKV is implemented under RocksDB. The performance evaluation under LinkBench shows that NoFTL-KV improves transactional throughput by 33%, while response times improve up to 2.3x. Furthermore, NoFTL KV reduces write-amplification 19x and improves storage longevity by imately the same factor.
Using the damage area as a quantification method for the Martindale test is a promising method to compare textile finishes without the need to test to full destruction. In addition, it could be shown that the results of Martindale tests performed with different pressure loads can be scaled to identical functional shape. If these results can be verified, this method would be a simplification of abrasive testing for different application areas.
Music is omnipresent and an important factor for cultural and social development. Thus, the connection between music and fashion has rarely been contemplated yet. In particular, this research paper is concerned with the connection between music and fashion communication, with special interest to its emotional background in the context of neuromarketing. The research question of how music affects the perception of a fashion brand, when regarded as emotional stimulus in the context of neuromarketing, has been investigated by researching existing literature. Without attempting to explain neurological processes to their core, this paper tries to give an overview of how music generates emotion and how this can be used for branding activities. This led to the result that music causes positive emotional response of the consumer, when used in marketing actions. Through emotional response, the perception, identity, and recall of a brand are strongly influenced.
Service robots need to be aware of persons in their vicinity in order to interact with them. People tracking enables the robot to perceive persons by fusing the information of several sensors. Most robots rely on laser range scanners and RGB cameras for this task. The thesis focuses on the detection and tracking of heads. This allows the robot to establish eye contact, which makes interactions feel more natural.
Developing a fast and reliable pose invariant head detector is challenging. The head detector that is proposed in this thesis works well on frontal heads, but is not fully pose-invariant. This thesis further explores adaptive tracking to keep track of heads that do not face the robot. Finally, head detector and adaptive tracker are combined within a new people tracking framework and experiments show its effectiveness compared to a state-of the-art system.
Decentralized energy systems are characterized by an ad hoc planing. The missing integration of energy objectives into business strategy creates difficulties resulting in inefficient energy architectures and decisions. Practice-proven methods such as balanced scorecard, enterprise architecture management and value network approach supports the transformation path towards an effective decentralized system. The methods are evaluated based on a case study. Managing multi-dimensionality, high complexity and multiple actors are the main drivers for an effective and efficient energy management system. The underlying basis to gain the positive impacts of these methods on decentralized corporate energy systems is digitization of energy data and processes.
Rational strain engineering requires solid testing of phenotypes including productivity and ideally contributes thereby directly to our understanding of the genotype-phenotype relationship. Actually, the test step of the strain engineering cycle becomes the limiting step, as ever advancing tools for generating genetic diversity exist. Here, we briefly define the challenge one faces in quantifiying phenotypes and summarize existing analytical techniques that partially overcome this challenge. We argue that the evolution of volatile metabolites can be used as proxy for cellular metabolism. In the simplest case, the product of interest is a volatile (e.g., from bulk alcohols to special fragrances) that is directly quantified over time. But also nonvolatile products (e.g., from bulk long-chain fatty acids to natural products) require major flux rerouting that result potentially in altered volatile production. While alternative techniques for volatile determination exist, rather few can be envisaged for medium to high-throughput analysis required for phenotype testing. Here, we contribute a detailed protocol for an ion mobility spectrometry (IMS) analysis that allows volatile metabolite quantification down to the ppb range. The sensivity can be exploited for small-scale fermentation monitoring. The insights shared might contribute to a more frequent use of IMS in biotechnology, while the experimented aspects are of general use for researchers interested in volatile monitoring.
Modeling interactive Enterprise Architecture visualizations: an extended architecture description
(2018)
Enterprise architectures consist of a multitude of architecture elements, which relate in manifold ways to each other. Due to the high number of relationships between these elements, architectural analysis mechanisms are essential for all stakeholders to keep track and to work out relevant model characteristics. In practice EAs are often analyzed using visualizations by hand. However, the visualizations are often static and there are only few interaction possibilities. As a result, new visualizations have to be created or configured by experts if information demands change. In addition, hardly any tools are used for analysis of complex model characteristics. In this article we introduce an extended conceptualization of the architecture description that defines the structure of interactive visualizations and the integration of further tools to flexibly respond to the information demands of stakeholders. In addition, we develop a so-called Architecture Cockpit that realizes the extended conceptualization in a prototype. At the end we demonstrate and evaluate our approach through a practical test in a company in the finance and insurance industry.
The success of an autonomous robotic system is influenced by several not easily identifiable interdependent factors. This paper is set to lay the foundation of an integrated approach in order to examine all the parameters and understand their contribution to success. After introducing the problem, two autonomous systems for the process of unloading of containers are presented. Then a recently developed method for modelling and interpreting all the parameters, the STIC analysis, are introduced. The preliminary results of applying such a methodology to a first study case is shortly presented. Future research is in the end recommended in order to prove that this methodology is the only way to overcome barriers to the investment in autonomous systems in the logistics sector.
SLAM systems are mainly applied for robot navigation while research on feasibility for motion planning with SLAM for tasks like bin-picking, is scarce. Accurate 3D reconstruction of objects and environments is important for planning motion and computing optimal gripper pose to grasp objects. In this work, we propose the methods to analyze the accuracy of a 3D environment reconstructed using a LSD-SLAM system with a monocular camera mounted onto the gripper of a collaborative robot. We discuss and propose a solution to the pose space conversion problem. Finally, we present several criteria to analyze the 3D reconstruction accuracy. These could be used as guidelines to improve the accuracy of 3D reconstructions with monocular LSD-SLAM and other SLAM based solutions.
The purpose of this research paper is to find out to which extent rap music merchandise is influencing the fashion world of today. The research design is mainly created through analysing Internet sources. The key findings of this paper describe the way rap merchandise is created and distributed nowadays. Furthermore, is explained how an idea becomes trend and how rap artists influence trend creation, especially through social media channels. The topic around rap merchandising products and strategies is a very new one, thus there is barely any literature to find. Nevertheless, trend leading online music platforms and blogs offer a lot of grey literature about the research topic. In this paper, the analysis of rap merchandise and fashion is focused on clothing items to create a better understanding in which dimension the influence of rap merchandise on the fashion world is given.
Context: Software product lines are widely used in automotive embedded software development. This software paradigm improves the quality of software variants by reuse. The combination of agile software development practices with software product lines promises a faster delivery of high quality software. However, the set up of an agile software product line is still challenging, especially in the automotive domain. Goal: This publication aims to evaluate to what extend agility fits to automotive product line engineering. Method: Based on previous work and two workshops, agility is mapped to software product line concerns. Results: This publication presents important principles of software product lines, and examines how agile approaches fit to those principles. Additionally, the principles are related to one of the four major concerns of software product line engineering: Business, Architecture, Process, and Organization. Conclusion: Agile software product line engineering is promising and can add value to existing development approaches. The identified commonalities and hindering factors need to be considered when defining a combined agile product line engineering approach.
This paper looks at the case of Reutlingen University (Hochschule Reutlingen), a university with a reputation for international student mobility. It examines how the university strives to fulfil its mandate to prepare ‘industry-ready’ graduates for the global industry by providing an international practice-oriented education. The key focus is on its efforts to establish credit-bearing internship programmes for international students, an area where the institution has ramped up its activities in recent years. Internships for international students is understood to encompass both domestic internships for international students (exchange and degree-seeking students) as well as internships abroad for home-grown degree-seeking students. The paper presents models and approaches that seek to ensure the quality of the international internship experience. It discusses challenges that the university has encountered on the way and makes suggestions about how to create internship opportunities against the backdrop of competing demands and expectations.
Turbidity sensing is very common in the control of drinking water. Furthermore, turbidity measurements are applied in the chemical (e.g., process monitoring), pharmaceutical (e.g., drug discovery), and food industries (e.g., the filtration of wine and beer). The most common measurement technique is nephelometric turbidimetry. A nephelometer is a device for measuring the amount of scattered light of suspended particles in a liquid by using a light source and a light detector orientated in 90°to each other. Commercially available nephelometers cost usually—depending on the measurable range, reliability, and precision —thousands of euros. In contrast, our new developed GRIN-lens-based nephelometer, called GRINephy, combines low costs with excellent reproducibility and precision, even at very low turbidity levels, which is achieved by its ability to rotate the sample. Thereby, many cuvette positions can be measured, which results in a more precise average value for the turbidity calculated by an algorithm, which also eliminates errors caused by scratches and contaminations on the cuvettes. With our compact and cheap Arduino-based sensor, we are able to measure in the range of 0.1–1000 NTU and confirm the ISO 7027-1:2016 for low turbidity values.
The hotspot detection has received much attention in the recent years due to a substantial mismatch between lithography wavelength and semiconductor technology feature size. This mismatch causes diffraction when transferring the layout from design onto a silicon wafer. As a result, open or short circuits (i.e. lithography hotspots) are more likely to be produced. Additionally, increasing numbers of semiconductors devices on a wafer required more time for the lithography hotspot detection analysis. In this work, we propose a fast and accurate solution based on novel artificial neural network (ANN) architecture for precise lithography hotspot detection using a convolution neural network (CNN) adopting a state of-the-art technique. The experimental results showed that the proposed model gained accuracy improvement over current state-of-theart approaches. The final code has been made publicly available.
Maintainability assurance techniques are used to control this quality attribute and limit the accumulation of potentially unknown technical debt. Since the industry state of practice and especially the handling of service- and microservice-based systems in this regard are not well covered in scientific literature, we created a survey to gather evidence for a) used processes, tools, and metrics in the industry, b) maintainability-related treatment of systems based on service orientation, and c) influences on developer satisfaction w.r.t. maintainability. 60 software professionals responded to our online questionnaire. The results indicate that using explicit and systematic techniques has benefits for maintainability. The more sophisticated the applied methods the more satisfied participants were with the maintainability of their software while no link to a hindrance in productivity could be established. Other important findings were the absence of architecture-level evolvability control mechanisms as well as a significant neglect of service-oriented particularities for quality assurance. The results suggest that industry has to improve its quality control in these regards to avoid problems with long living service-based software systems.
Lessons from sports : what corporate managers can learn from international professional sports
(2018)
Although sports is generally defined as motor activity, it has always been much more than that. Since management and sports follow the same objective of achieving highest performance, correlations between these two fields nowadays become increasingly interesting in terms of corporate strategy. This paper aims to point out how organisations as well as individuals can benefit from the general and psychological values and strategies of international professional sports, by first looking at the general framework of professional sports and further applying approaches from various types of sports directly to certain business functions like general management, human resource management and marketing management.
This book investigates and highlights the most critical challenges the pharmaceutical industry faces in an increasingly competitive environment of inflationary R&D investments and tightening cost control pressures. The authors present three sources of pharmaceutical innovation: new management methods in the drug development pipeline; new technologies as enablers for cutting-edge R&D; and new forms of cooperation and internationalization, such as open innovation in the early phases of R&D. New models and methods are illustrated with cases from Europe, the US, and Asia. This third fully revised edition was expanded to reflect the latest updates in open and collaborative innovation, the greater strategic importance of venture capital and early stage investments, and the new range of emerging technologies now being put to use in pharmaceutical innovation.
After more than three decades of electronic design automation, most layouts for analog integrated circuits are still handcrafted in a laborious manual fashion today. Obverse to the highly automated synthesis tools in the digital domain (coping with the quantitative difficulty of packing more and more components onto a single chip – a desire well known as More Moore), analog layout automation struggles with the many diverse and heavily correlated functional requirements that turn the analog design problem into a More than Moore challenge. Facing this qualitative complexity, seasoned layout engineers rely on their comprehensive expert knowledge to consider all design constraints that uncompromisingly need to be satisfied. This usually involves both formally specified and nonformally communicated pieces of expert knowledge, which entails an explicit and implicit consideration of design constraints, respectively.
Existing automation approaches can be basically divided into optimization algorithms (where constraint consideration occurs explicitly) and procedural generators (where constraints can only be taken into account implicitly). As investigated in this thesis, these two automation strategies follow two fundamentally different paradigms denoted as top-down automation and bottom-up automation. The major trait of top-down automation is that it requires a thorough formalization of the problem to enable a self-intelligent solution finding, whereas a bottom-up automatism –controlled by parameters– merely reproduces solutions that have been preconceived by a layout expert in advance. Since the strengths of one paradigm may compensate the weaknesses of the other, it is assumed that a combination of both paradigms –called bottom-up meets top-down– has much more potential to tackle the analog design problem in its entirety than either optimization-based or generator-based approaches alone.
Against this background, the thesis at hand presents Self-organized Wiring and Arrangement of Responsive Modules (SWARM), an interdisciplinary methodology addressing the design problem with a decentralized multi-agent system. Its basic principle, similar to the roundup of a sheep herd, is to let responsive mobile layout modules (implemented as context-aware procedural generators) interact with each other inside a user-defined layout zone. Each module is allowed to autonomously move, rotate and deform itself, while a supervising control organ successively tightens the layout zone to steer the interaction towards increasingly compact (and constraint compliant) layout arrangements. Considering various principles of self-organization and incorporating ideas from existing decentralized systems, SWARM is able to evoke the phenomenon of emergence: although each module only has a limited viewpoint and selfishly pursues its personal objectives, remarkable overall solutions can emerge on the global scale.
Several examples exhibit this emergent behavior in SWARM, and it is particularly interesting that even optimal solutions can arise from the module interaction. Further examples demonstrate SWARM’s suitability for floorplanning purposes and its application to practical place-and-route problems. The latter illustrates how the interacting modules take care of their respective design requirements implicitly (i.e., bottom-up) while simultaneously paying respect to high level constraints (such as the layout outline imposed top-down by the supervising control organ). Experimental results show that SWARM can outperform optimization algorithms and procedural generators both in terms of layout quality and design productivity. From an academic point of view, SWARM’s grand achievement is to tap fertile virgin soil for future works on novel bottom-up meets top-down automatisms. These may one day be the key to close the automation gap in analog layout design.
Digitization is the use of digital technologies for creating innovative digital business models and transforming existing business models, processes and systems. Digitization creates profound changes in the economy and society. Information is often captured and processed without human intervention using digital means. Digitization impacts nearly all products and services as well as the customer and the value-creation perspective.
This paper presents a fully integrated gate driver in a 180-nm bipolar CMOS DMOS (BCD) technology with 1.5-A max. gate current, suitable for normally OFF gallium nitride (GaN) power switches, including gate-injection transistors (GIT). Full-bridge driver architecture provides a bipolar and three-level gate drive voltage for a robust and efficient GaN switching. The concept of high voltage energy storing (HVES), which comprises an on-chip resonant LC tank, enables a very area-efficient buffer capacitor integration and superior gatedriving speed. It reduces the component count and the influence of parasitic gate-loop inductance. Theory and calculations confirm the benefits of HVES compared to other capacitor implementation methods. The proposed gate driver delivers a gate charge of up to 11.6 nC, sufficient to drive most types of currently available GaN power transistors. Consequently, HVES enables to utilize the fast switching capabilities of GaN for advanced and compact power electronics.
In a corporation’s financial life “going public” by means of an IPO is probably the single most important decision. It turns a private company into a public one. Our book will provide an inside view of the IPO process. On the one hand, it draws on the insights of an experienced investment banker, who has gone through numerous IPO transactions. On the other hand, it relates the story of an actual IPO through the eyes of a Chief Executive Officer who has taken two of his companies public. This unique double perspective is our book’s defining feature. We do not discuss initial public offerings in a textbook style fashion. What we would like to bring out is a more comprehensive portrayal of a “once-in-a-lifetime” event for most companies and their management, alike.
Soft thermoplastic polysiloxane-urea-elastomers (PSUs) were prepared for the application as a biomaterial to replace the human natural lens after cataract surgery. PSUs were synthesized from amino-terminated polydimethylsiloxanes (PDMS), 4,4′-Methylenebis(cyclohexylisocyanate) (H12MDI) and 1,3–Bis(3-aminopropyl)-1,1,3,3–tetramethyldisiloxane (APTMDS) by a two-step polyaddition route. Such a material has to be highly transparent and must exhibit a low Young’s Modulus and excellent dimensional stability. Polydimethylsiloxanes in the range of 3000–33,000 g·mol−1 were therefore prepared by ring-chain-equilibration of octamethylcyclotetrasiloxane (D4) and APTMDS in order to study the influence of the soft segment molecular weight on the mechanical properties and the transparency of the PSU-elastomers. 2,4,6,8-Tetramethyl-2,4,6,8-tetraphenylcyclotetrasiloxane (D4Me,Ph) was co-polymerized with D4 in order to adjust the refractive index of the polydimethyl-methyl-phenyl-siloxane-copolymers to a value equivalent to a young human natural lens. Very elastic PSUs with Elongation at Break values higher than 700% were prepared. PSU-elastomers, synthesized from PDMS of molecular weights up to 18,000 g·mol−1, showed transmittance values of over 90% within the visible spectrum range. The soft segment refractive index was increased through the incorporation of 14 mol % of methyl-phenyl-siloxane from 1.4011 to 1.4346 (37 °C). Young’s Moduli of PSU-elastomers were around 1 MPa and lower at PDMS molecular weights up to 15,000 g·mol−1. 10-cycle hysteresis measurements were applied to evaluate the mechanical stability of the PSUs at repeated stress. Hysteresis values at 100% strain decreased from 32 to 2% (10th cycle) with increasing PDMS molecular weight. Furthermore, hysteresis at 5% strain was only detected in PSU-elastomers with low PDMS molecular weights. Finally, preliminary results of in vitro cytotoxicity tests on a PSU-elastomer showed no toxic effects on HaCaT-cells.
The blockchain technology enables a common data basis between the participants. Entries are logged and the authenticity of the participants is guaranteed. In the case of a relationship between customers and producers, this would lead to verifiable cooperation, which would be a major step as companies enter into service contracts based on the flow of many small transactions through communication. This paper proposes an architecture that enables the creation and processing of orders between the customer and producers via a blockchain based production network. The handling of larger files which are traceable via the blockchain is also shown and the use of a public or permissioned blockchain for an application case is also considered.
The purpose of this paper is to identify the role of in-store music in the fashion retail environment and to describe music as an atmospheric building tool in order to influence customer behaviour with emotions created by musical compositions. As offline retailer try to differentiate their stores through shopping experiences, atmospherics like visuals, scent and sound are appropriate tools to reinforce brand image and therefore customers’ willingness to enter, explore and purchase. Music can be a powerful primary element in creating or enhancing sensory experiences of shoppers and serves as a powerful connection to emotions. Focus of the literature review lies on the emotions which are triggered though different musical characteristics and then affect the customer behaviour. The paper offers a concisely presented review and highlights crucial aspects on what role in-store music has on customers’ perception of atmosphere, emotions and behaviour.
A series of novel biomedical TPCUs with different percentages of hard segment and a silicone component in the soft segment were synthesized in a multi stage one-pot method. The kinetic profiles of the urethane formation in TPCU-based copolymer systems were monitored by rheological, in line FTIR spectroscopic (React IR) and real-time calorimetric (RC1) methods. This process-analytically monitored multi step synthesis was successfully used to optimize the production of medical-grade TPCU elastomers on preparative scale (in lots of several kg) with controlled molecular structure and mechanical properties. Various surface and bulk analytical methods as well as systematic studies of the mechanic response of the elastomer end-products towards compression and tensile loading were used to estimate the bio-stability of the prepared TPCUs in vitro after 3 months. The tests suggested that high bio-stability of all polyurethane formulations using accelerating in vitro test can be attributed to the synthetic design as well as to the specific techniques used for specimen preparation, namely: (1) the annealing for reducing residual polymer surface stress and preventing IES, (2) stabilization of the morphology by long time storage of the specimens after processing before being immersed in the test liquids, (3) purification by extraction to remove the shot chain oligomers which are the most susceptible to degradation. All mechanical tests were performed on cylindrical and circular disc specimens for modelling the thickness of the meniscus implants under application-relevant stress conditions.
Background: Internationally, teledermatology has proven to be a viable alternative to conventional physical referrals. Travel cost and referral times are reduced while patient safety is preserved. Especially patients from rural areas benefit from this healthcare innovation. Despite these established facts and positive experiences from EU neighboring countries like the Netherlands or the United Kingdom, Germany has not yet implemented store-and-forward teledermatology in routine care.
Methods: The TeleDerm study will implement and evaluate store-and-forward teledermatology in 50 general practitioner (GP) practices as an alternative to conventional referrals. TeleDerm aims to confirm that the possibility of store-and-forward teledermatology in GP practices is going to lead to a 15% (n = 260) reduction in referrals in the intervention arm. The study uses a cluster-randomized controlled trial design. Randomization is planned for the cluster “county”. The main observational unit is the GP practice. Poisson distribution of referrals is assumed. The evaluation of secondary outcomes like acceptance, enablers and barriers uses a mixed methods design with questionnaires and interviews.
Discussion: Due to the heterogeneity of GP practice organization, patient management software, information technology service providers, GP personal technical affinity and training, we expect several challenges in implementing teledermatology in German GP routine care. Therefore, we plan to recruit 30% more GPs than required by the power calculation. The implementation design and accompanying evaluation is expected to deliver vital insights into the specifics of implementing telemedicine in German routine care.
The coculture of osteogenic and angiogenic cells and the resulting paracrine signaling via soluble factors are supposed to be crucial for successfully engineering vascularized bone tissue equivalents. In this study, a coculture system combining primary human adiposederived stem cells (hASCs) and primary human dermal microvascular endothelial cells (HDMECs) within two types of hydrogels based on methacryloyl‐modified gelatin (GM) as three‐dimensional scaffolds was examined for its support of tissue specific cell functions. HDMECs, together with hASCs as supporting cells, were encapsulated in soft GM gels and were indirectly cocultured with hASCs encapsulated in stiffer GM hydrogels additionally containing methacrylate‐modified hyaluronic acid and hydroxyapatite particles. After 14 days, the hASC in the stiffer gels (constituting the “bone gels”) expressed matrix proteins like collagen type I and fibronectin, as well as bone‐specific proteins osteopontin and alkaline phosphatase. After 14 days of coculture with HDMEC‐laden hydrogels, the viscoelastic properties of the bone gels were significantly higher compared with the gels in monoculture. Within the soft vascularization gels, the formed capillary‐like networks were significantly longer after 14 days of coculture than the structures in the control gels. In addition, the stability as well as the complexity of the vascular networks was significantly increased by coculture. We discussed and concluded that osteogenic and angiogenic signals from the culture media as well as from cocultured cell types, and tissue‐specific hydrogel composition all contribute to stimulate the interplay between osteogenesis and angiogenesis in vitro and are a basis for engineering vascularized bone.
Customer relationship management (CRM) is one of the most frequently adopted management tools and has received much attention in the literature. From a company-wide perspective, CRM is viewed as a complex process requiring interventions in different company areas. Previous research has already highlighted the pitfalls and failures related to a partial and incomplete view of CRM. This study advances research on CRM by investigating the impact of the relative implementation time according to which interventions are implemented in different areas (customer management, CRM technology, organizational alignment, and CRM strategy) on CRM performance. The results of the empirical study reveal that compared to other critical CRM activities, a later implementation of organizational alignment activities has a negative impact on performance. Further, our results show that CRM implementations do not equally address the areas of customer acquisition, growth, and loyalty, since this clearly depends on company objectives and also on geographical differences.
Impact of phenolic resin preparation on its properties and its penetration behavior in Kraft paper
(2018)
The core of decorative laminates is generally made of stacked Kraft paper sheets impregnated with a phenolic resin. As the impregnation process in industry is relatively fast, new methods need to be developed to characterize it for different paper-resin systems. Several phenolic resins were synthesized with the same Phenol:Formaldehyde ratio of 1:1.8 and characterized by Fourier Transform Infrared Spectrometry (FTIR) as well as Size-Exclusion Chromatography (SEC). In addition, their viscosities and surface tensions when diluted in methanol to 45% of solid content were measured. The capacity of each resin to penetrate a Kraft paper sheet was characterized using a new method, which measures the conductivities induced by the liquid resin crossing the paper substrate. With this method, crossing times could be measured with a good accuracy. Surprisingly, the results showed that the penetration time of the resin samples is not correlated to the viscosity values, but rather to the surface tension characteristics and the chemical characteristics of paper. Furthermore, some resins had a higher swelling effect on the fibers that delayed the crossing of the liquid through the paper.
Lots of movies are produced every year, too many to watch all of them and in particular, to get an overview about the evolution of typical movie genres and actors playing in them. Moreover, it is a challenging problem to detect correlations among the movies and the actors in those movies, in particular, if we are interested in time-varying data patterns like trends, countertrends, or anomalies and outliers. Those correlations are specifically interesting if they can be inspected on different levels of granularity, e.g., temporal, but also hierarchical in form of country- or continent-based correlations. In this paper we describe the IMDb Explorer, a webbased visualization tool that consists of two major views denoted by the movie cosmos and the career lines. Both views are linked and interactively manipulable while a list of user-defined metrics are explorable. We illustrate the usefulness of the visualization tool by applying it to the entire movie database provided by IMDb.
Free-floating e-scooter sharing is an upcoming trend in mobility, which has been spreading since 2015 in various German cities. Unlike the more scientifically explorend car sharing, the usage patterns and behaviors of e-scooter sharing customers are yet to be analyzed. This presumably discovers better ways to attract customers as well as adaptions of the business model in order to increase scooter utilization and therefore the profit of the e-scooter providers. As most of the customer's journey, from registration to scooter reservation and the ride itself, is digitally traceable, large datasets are available allowing for understanding of customers' needs and motivations. Based on these datasets of an e-scooter provider operating in a big German city we propose a customer clustering that identifies four different customer segments, which enables multiple conclusions to be drawn for business development and improving the problem-solution fit of the e-scooter sharing model.
Software and system development faces numerous challenges of rapidly changing markets. To address such challenges, companies and projects design and adopt specific development approaches by combining well-structured methods and flexible agile practices. Yet, the number of methods and practices is large and the actual process composition is often carried out in an ad-hoc manner. This paper reports on a survey on hybrid software development approaches. We study which approaches are used in practice, how different approaches are combined, and what contextual factors influence the use and combination of hybrid software development approaches.
With the digital transformation being one of the most discussed topics in the business world today, many enterprises – especially small and medium sized ones – find themselves struggling with the understanding of new digital technologies and thus the potential benefits and risks for their companies. New technologies like the Internet of Things, Blockchain or Machine Learning have great potential for businesses. However, carefully evaluating and selecting purposeful technologies – aligned to the digital strategy – is the key to success. Technologies appear, change and also vanish so rapidly in the digital age, that a proper understanding is crucial for a sustainable technological foundation. Focusing on the characteristic features of technologies, the presented approach promises to create a better technological understanding for decision makers in small and medium-sized enterprises (SMEs) in a playful manner: With a serious game that fosters insight and allays fears of digitalization.
This article aims to point out main changes of the music industry since the advent of the Internet and how the fashion industry can learn from it. Different factors are researched with a birds-eye perspective by conducting a literature review. The results are limited by the availability of sources and the implications are based on a theoretical foundation. For further research the conclusions drawn for the fashion industry have to be proven empirically. After reading the paper, the reader has rather an overview of the changed circumstances and how the music industry reacted than deep knowledge in each field. More specifically, this paper gives an overview of the changed circumstances due to digitalisation and how the music industry reacted within. As both the fashion and music industry have their similarities, they are limited in their comparability, since fashion products cannot be fully digitalized like a music record. The fact that the music industry had to reinvent itself rapidly to adopt new possibilities and chances results from the article. To make use of the sustainability trend and to build communities in order to include them in the creation process are the major suggestions for the fashion industry.
A transaction is a demarcated sequence of application operations, for which the following properties are guaranteed by the underlying transaction processing system (TPS): atomicity, consistency, isolation, and durability (ACID). Transactions are therefore a general abstraction, provided by TPS that simplifies application development by relieving transactional applications from the burden of concurrency and failure handling. Apart from the ACID properties, a TPS must guarantee high and robust performance (high transactional throughput and low response times), high reliability (no data loss, ability to recover last consistent state, fault tolerance), and high availability (infrequent outages, short recovery times).
The architectures and workhorse algorithms of a high-performance TPS are built around the properties of the underlying hardware. The introduction of nonvolatile memories (NVM) as novel storage technology opens an entire new problem space, with the need to revise aspects such as the virtual memory hierarchy, storage management and data placement, access paths, and indexing. NVM are also referred to as storage-class memory (SCM).
Software engineering education is supposed to provide students with industry-relevant knowledge and skills. Educators must address issues beyond exercises and theories that can be directly rehearsed in small settings. A way to experience such effects and to increase the relevance of software engineering education is to apply empirical studies in teaching. In our article, we show how different types of empirical studies can be used for educational purposes in software engineering. We give examples illustrating how to utilize empirical studies, discuss challenges, and derive an initial guideline that supports teachers to include empirical studies in software engineering courses.
Functionalised particles are highly requested in materials research, as they can be used as vital components in many advanced applications such as smart materials, functional coatings, drug carrier systems or adsorption materials. In this study, furan-functionalised melamine-formaldehyde (MF) particles were successfully prepared for the first time using an organic sol-gel process. Commercially available 2-Aminomethylfuran (AMF) and 2-Aminomethyl-5-methylfuran (AMMF) were used as modifying agents. In the isolated polymer particles, a melamine (M) to modifying agent ratio of M:AMF mol/mol 2.04:1 and M:AMMF ratio of mol/mol 1.25:1 was used. The obtained particles were isolated in various centrifugation and re-dispersion cycles and analysed using ATR-FT-IR, Raman and solid state 13C NMR spectroscopy, TGA, SEM and DSC measurements. Upon functionalisation the size of the MF particles increased (MF 1.59 µm, 27% CV (coefficient of variation); MF-AMF 2.56 µm, 25% CV; MF-AMMF 2.20 µm, 35% CV). DSC measurements showed that another type of exothermic residual reactivity besides condensation-based curing takes place with the furan-modified particles that is not related to the liberation of volatile compounds. The newly obtained particles are able to undergo Diels-Alder reactions with maleimide groups. The characteristic IR and Raman absorbance bands of the reaction products after the particles were reacted with 4,4′-Diphenylmethanebismaleimide reagent confirm the formation of a Diels-Alder adduct.
Due to the lack of sophisticated component libraries for microelectromechanical systems (MEMS), highly optimized MEMS sensors are currently designed using a polygon driven design flow. The advantage of this design flow is its accurate mechanical simulation, but it lacks a method for analyzing the dynamic parasitic electrostatic effects arising from the electric coupling between (stationary) wiring and structures in motion. In order to close this gap, we present a method that enables the parasitics arising from in-plane, sensor-structure motion to be extracted quasi-dynamically. With the method's structural-recognition feature we can analyze and optimize dynamic parasitic electrostatic effects.