Informatik
Refine
Document Type
- Conference proceeding (91) (remove)
Has full text
- yes (91) (remove)
Is part of the Bibliography
- yes (91)
Institute
- Informatik (91)
Publisher
- Springer (91) (remove)
The basic idea behind a wearable robotic grasp assistancesystem is to support people that suffer from severe motor impairments in daily activities. Such a system needs to act mostly autonomously and according to the user’s intent. Vision-based hand pose estimation could be an integral part of a larger control and assistance framework. In this paper we evaluate the performance of egocentric monocular hand pose estimation for a robot-controlled hand exoskeleton in a simulation. For hand pose estimation we adopt a Convolutional Neural Network (CNN). We train and evaluate this network with computer graphics, created by our own data generator. In order to guide further design decisions we focus in our experiments on two egocentric camera viewpoints tested on synthetic data with the help of a 3D-scanned hand model, with and without an exoskeleton attached to it.We observe that hand pose estimation with a wrist-mounted camera performs more accurate than with a head-mounted camera in the context of our simulation. Further, a grasp assistance system attached to the hand alters visual appearance and can improve hand pose estimation. Our experiment provides useful insights for the integration of sensors into a context sensitive analysis framework for intelligent assistance.
Additive Manufacturing is increasingly used in the industrial sector as a result of continuous development. In the Production Planning and Control (PPC) system, AM enables an agile response in the area of detailed and process planning, especially for a large number of plants. For this purpose, a concept for a PPC system for AM is presented, which takes into account the requirements for integration into the operational enterprise software system. The technical applicability will be demonstrated by individual implemented sections. The presented solution approach promises a more efficient utilization of the plants and a more elastic use.
While several service-based maintainability metrics have been proposed in the scientific literature, reliable approaches to automatically collect these metrics are lacking. Since static analysis is complicated for decentralized and technologically diverse microservice-based systems, we propose a dynamic approach to calculate such metrics from runtime data via distributed tracing. The approach focuses on simplicity, extensibility, and broad applicability. As a first prototype, we implemented a Java application with a Zipkin integrator, 23 different metrics, and five export formats. We demonstrated the feasibility of the approach by analyzing the runtime data of an example microservice based system. During an exploratory study with six participants, 14 of the 18 services were invoked via the system’s web interface. For these services, all metrics were calculated correctly from the generated traces.
While many maintainability metrics have been explicitly designed for service-based systems, tool-supported approaches to automatically collect these metrics are lacking. Especially in the context of microservices, decentralization and technological heterogeneity may pose challenges for static analysis. We therefore propose the modular and extensible RAMA approach (RESTful API Metric Analyzer) to calculate such metrics from machine-readable interface descriptions of RESTful services. We also provide prototypical tool support, the RAMA CLI, which currently parses the formats OpenAPI, RAML, and WADL and calculates 10 structural service-based metrics proposed in scientific literature. To make RAMA measurement results more actionable, we additionally designed a repeatable benchmark for quartile-based threshold ranges (green, yellow, orange, red). In an exemplary run, we derived thresholds for all RAMA CLI metrics from the interface descriptions of 1,737 publicly available RESTful APIs. Researchers and practitioners can use RAMA to evaluate the maintainability of RESTful services or to support the empirical evaluation of new service interface metrics.
Evaluation of a contactless accelerometer sensor system for heart rate monitoring during sleep
(2024)
The monitoring of a patient's heart rate (HR) is critical in the diagnosis of diseases. In the detection of sleep disorders, it also plays an important role. Several techniques have been proposed, including using sensors to record physiological signals that are automatically examined and analysed. This work aims to evaluate using a contactless HR monitoring system based on an accelerometer sensor during sleep. For this purpose, the oscillations caused by chest movements during heart contractions are recorded by an installation mounted under the bed mattress. The processing algorithm presented in this paper filters the signals and determines the HR. As a result, an average error of about 5 bpm has been documented, i.e., the system can be considered to be used for the forecasted domain.
The digitization of factories will be a significant issue for the 2020s. New scenarios are emerging to increase the efficiency of production lines inside the factory, based on a new generation of robots’ collaborative functions. Manufacturers are moving towards data-driven ecosystems by leveraging product lifecycle data from connected goods. Energy-efficient communication schemes, as well as scalable data analytics, will support these various data collection scenarios. With augmented reality, new remote services are emerging that facilitate the efficient sharing of knowledge in the factory. Future communication solutions should generally ensure connectivity between the various production sites spread worldwide and new players in the value chain (e.g., suppliers, logistics) transparent, real-time, and secure. Industry 4.0 brings more intelligence and flexibility to production. Resulting in more lightweight equipment and, thus, offering better ergonomics. 5G will guarantee real-time transmissions with latencies of less than 1 ms. This will provide manufacturers with new possibilities to collect data and trigger actions automatically.
Sleep is an important aspect in life of every human being. The average sleep duration for an adult is approximately 7 h per day. Sleep is necessary to regenerate physical and psychological state of a human. A bad sleep quality has a major impact on the health status and can lead to different diseases. In this paper an approach will be presented, which uses a long-term monitoring of vital data gathered by a body sensor during the day and the night supported by mobile application connected to an analyzing system, to estimate sleep quality of its user as well as give recommendations to improve it in real-time. Actimetry and historical data will be used to improve the individual recommendations, based on common techniques used in the area of machine learning and big data analysis.
While the recently emerged microservices architectural style is widely discussed in literature, it is difficult to find clear guidance on the process of refactoring legacy applications. The importance of the topic is underpinned by high costs and effort of a refactoring process which has several other implications, e.g. overall processes (DevOps) and team structure. Software architects facing this challenge are in need of selecting an appropriate strategy and refactoring technique. One of the most discussed aspects in this context is finding the right service granularity to fully leverage the advantages of a microservices architecture. This study first discusses the notion of architectural refactoring and subsequently compares 10 existing refactoring approaches recently proposed in academic literature. The approaches are classified by the underlying decomposition technique and visually presented in the form of a decision guide for quick reference. The review yielded a variety of strategies to break down a monolithic application into independent services. With one exception, most approaches are only applicable under certain conditions. Further concerns are the significant amount of input data some approaches require as well as limited or prototypical tool support.
Sleep quality and in general, behavior in bed can be detected using a sleep state analysis. These results can help a subject to regulate sleep and recognize different sleeping disorders. In this work, a sensor grid for pressure and movement detection supporting sleep phase analysis is proposed. In comparison to the leading standard measuring system, which is Polysomnography (PSG), the system proposed in this project is a non invasive sleep monitoring device. For continuous analysis or home use, the PSG or wearable actigraphy devices tends to be uncomfortable. Besides this fact, they are also very expensive. The system represented in this work classifies respiration and body movement with only one type of sensor and also in a non invasive way. The sensor used is a pressure sensor. This sensor is low cost and can be used for commercial proposes. The system was tested by carrying out an experiment that recorded the sleep process of a subject. These recordings showed the potential for classification of breathing rate and body movements. Although previous researches show the use of pressure sensors in recognizing posture and breathing, they have been mostly used by positioning the sensors between the mattress and bedsheet. This project however, shows an innovative way to position the sensors under the mattress.
The main aim of presented in this manuscript research is to compare the results of objective and subjective measurement of sleep quality for older adults (65+) in the home environment. A total amount of 73 nights was evaluated in this study. Placing under the mattress device was used to obtain objective measurement data, and a common question on perceived sleep quality was asked to collect the subjective sleep quality level. The achieved results confirm the correlation between objective and subjective measurement of sleep quality with the average standard deviation equal to 2 of 10 possible quality points.
Identifikation von Schlaf- und Wachzuständen durch die Auswertung von Atem- und Bewegungssignalen
(2021)
Recognition of sleep and wake states is one of the relevant parts of sleep analysis. Performing this measurement in a contactless way increases comfort for the users. We present an approach evaluating only movement and respiratory signals to achieve recognition, which can be measured non-obtrusively. The algorithm is based on multinomial logistic regression and analyses features extracted out of mentioned above signals. These features were identified and developed after performing fundamental research on characteristics of vital signals during sleep. The achieved accuracy of 87% with the Cohen’s kappa of 0.40 demonstrates the appropriateness of a chosen method and encourages continuing research on this topic.
Based on well-established robotic concepts of autonomous localization and navigation we present a system prototype to assist camera-based indoor navigation for human utilization implemented in the Robot Operating System (ROS). Our prototype takes advantage of state-of-the-art computer vision and robotic methods. Our system is designed for assistive indoor guidance. We employ a vibro tactile belt to serve as a guiding device to render derived motion suggestions to the user via vibration patterns. We evaluated the effectiveness of a variety of vibro-tactile feedback patterns for guidance of blindfolded users. Our prototype demonstrates that a vision-based system can support human navigation, and may also assist the visually impaired in a human-centered way.
Software startups often make assumptions about the problems and customers they are addressing as well as the market and the solutions they are developing. Testing the right assumptions early is a means to mitigate risks. Approaches such as Lean Startup foster this kind of testing by applying experimentation as part of a constant build-measure-learn feedback loop. The existing research on how software startups approach experimentation is very limited. In this study, we focus on understanding how software startups approach experimentation and identify challenges and advantages with respect to conducting experiments. To achieve this, we conducted a qualitative interview study. The initial results show that startups often spent a disproportionate amount of time focusing on creating solutions without testing critical assumptions. Main reasons are the lack of awareness, that these assumptions can be tested early and a lack of knowledge and support on how to identify, prioritize and test these assumptions. However, startups understand the need for testing risky assumptions and are open to conducting experiments.
In recent years, the parallel computing community has shown increasing interest in leveraging cloud resources for executing parallel applications. Clouds exhibit several fundamental features of economic value, like on-demand resource provisioning and a pay-per-use model. Additionally, several cloud providers offer their resources with significant discounts; however, possessing limited availability. Such volatile resources are an auspicious opportunity to reduce the costs arising from computations, thus achieving higher cost efficiency. In this paper, we propose a cost model for quantifying the monetary costs of executing parallel applications in cloud environments, leveraging volatile resources. Using this cost model, one is able to determine a configuration of a cloud-based parallel system that minimizes the total costs of executing an application.
The proposed approach applies current unsupervised clustering approaches in a different dynamic manner. Instead of taking all the data as input and finding clusters among them, the given approach clusters Holter ECG data (longterm electrocardiography data from a holter monitor) on a given interval which enables a dynamic clustering approach (DCA). Therefore advanced clustering techniques based on the well known Dynamic TimeWarping algorithm are used. Having clusters e.g. on a daily basis, clusters can be compared by defining cluster shape properties. Doing this gives a measure for variation in unsupervised cluster shapes and may reveal unknown changes in healthiness. Embedding this approach into wearable devices offers advantages over the current techniques. On the one hand users get feedback if their ECG data characteristic changes unforeseeable over time which makes early detection possible. On the other hand cluster properties like biggest or smallest cluster may help a doctor in making diagnoses or observing several patients. Further, on found clusters known processing techniques like stress detection or arrhythmia classification may be applied.
Context: The current transformation of automotive development towards innovation, permanent learning and adapting to changes are directing various foci on the integration of agile methods. Although, there have been efforts to apply agile methods in the automotive domain for many years, a wide-spread adoption has not yet taken place.
Goal: This study aims to gain a better understanding of the forces that prevent the adoption of agile methods.
Method: Survey based on 16 semi-structured interviews from the automotive domain. The results are analyzed by means of thematic coding.
Results: Forces that prevent agile adoption are mainly of organizational, technical and social nature and address inertia, anxiety and context factors. Key challenges in agile adoption are related to transforming organizational structures and culture, achieving faster software release cycles without loss of quality, the importance of software reuse in combination with agile practices, appropriate quality assurance measures, and the collaboration with suppliers and other disciplines such as mechanics.
Conclusion: Significant challenges are imposed by specific characteristics of the automotive domain such as high quality requirements and many interfaces to surrounding rigid and inflexible processes. Several means are identified that promise to overcome these challenges.
Context: The current situation and future scenarios of the automotive domain require a new strategy to develop high quality software in a fast pace. In the automotive domain, it is assumed that a combination of agile development practices and software product lines is beneficial, in order to be capable to handle high frequency of improvements. This assumption is based on the understanding that agile methods introduce more flexibility in short development intervals. Software product lines help to manage the high amount of variants and to improve quality by reuse of software for long term development.
Goal: This study derives a better understanding of the expected benefits for a combination. Furthermore, it identifies the automotive specific challenges that prevent the adoption of agile methods within the software product line.
Method: Survey based on 16 semi structured interviews from the automotive domain, an internal workshop with 40 participants and a discussion round on ESE congress 2016. The results are analyzed by means of thematic coding.
Context: Software product lines are widely used in automotive embedded software development. This software paradigm improves the quality of software variants by reuse. The combination of agile software development practices with software product lines promises a faster delivery of high quality software. However, the set up of an agile software product line is still challenging, especially in the automotive domain. Goal: This publication aims to evaluate to what extend agility fits to automotive product line engineering. Method: Based on previous work and two workshops, agility is mapped to software product line concerns. Results: This publication presents important principles of software product lines, and examines how agile approaches fit to those principles. Additionally, the principles are related to one of the four major concerns of software product line engineering: Business, Architecture, Process, and Organization. Conclusion: Agile software product line engineering is promising and can add value to existing development approaches. The identified commonalities and hindering factors need to be considered when defining a combined agile product line engineering approach.