Informatik
Refine
Year of publication
- 2018 (64) (remove)
Document Type
- Conference proceeding (46)
- Journal article (15)
- Book chapter (3)
Language
- English (64) (remove)
Is part of the Bibliography
- yes (64)
Institute
- Informatik (64)
Publisher
- Springer (18)
- IEEE (11)
- RWTH Aachen (8)
- Gesellschaft für Informatik e.V (3)
- Association for Computing Machinery (2)
- Elsevier (2)
- HTWG Konstanz (2)
- SciTePress (2)
- ARVO (1)
- American Marketing Association (1)
Radiofrequency ablation is an ablation technique to treat tumors with focused heat. Computer tomography, ultrasound and magnetic resonance imaging (MRI) are imaging modalities which can be used for image-guided procedures. MRI offers several advantages in comparison to the other imaging modalities, such as radiation-free fluoroscopic imaging, temperature mapping, a high-soft-tissue contrast and free selection of imaging planes. This work addresses the application of 3Dcontrollers for controlling interventional, fluoroscopic MR sequences at the scenario of MR guided radiofrequency ablation of hepatic malignancies. During this procedure, the interventionalist can monitor the targeting of the tumor with near-real time fluoroscopic sequences. In general, adjustments of the imaging planes are necessary during tumor targeting, which is performed by an assistant in the control room. Therefore, communication between the interventionalist in the scanner room and the assistant in the control room is essential. However, verbal communication is impaired due to the loud scanning noises. Alternatively, non-verbal communication between the two persons is possible, however limited to a few gestures and susceptible to misunderstandings. This work is analyzing different 3D-controllers to enable control of interventional MR sequences during MR-guided procedures directly by the interventionalist. Leap Motion, Wii Remote, SpaceNavigator, Phantom Omni and Foot Switch were selected. For that a simulation was built in C++ with VTK to feign the real scenario for test purposes. Previous results showed that Leap Motion is not suitable for the application while Wii Remote and Foot Switch are possible input devices. Final evaluation showed a generally time reduction with the use of 3D-controllers. Best results were reached with Wii Remote in 34 seconds. Handholding input devices like Wii Remote have further potential to integrate them in real environment to reduce intervention time.
Digitization of societies changes the way we live, work, learn, communicate, and collaborate. In the age of digital transformation IT environments with a large number of rather small structures like Internet of Things (IoT), microservices, or mobility systems are emerging to support flexible and agile digitized products and services. Adaptable ecosystems with service oriented enterprise architectures are the foundation for self-optimizing, resilient run-time environments and distributed information systems. The resulting business disruptions affect almost all new information processes and systems in the context of digitization. Our aim are more flexible and agile transformations of both business and information technology domains with more flexible enterprise information systems through adaptation and evolution of digital enterprise architectures. The present research paper investigates mechanisms for decision-controlled digitization architectures for Internet of Things and microservices by evolving enterprise architecture reference models and state of the art elements for architectural engineering for micro-granular systems.
The digital transformation of our life changes the way we work, learn, communicate, and collaborate. Enterprises are presently transforming their strategy, culture, processes, and their information systems to become digital. The digital transformation deeply disrupts existing enterprises and economies. Digitization fosters the development of IT systems with many rather small and distributed structures, like Internet of Things, Microservices and mobile services. Since years a lot of new business opportunities appear using the potential of services computing, Internet of Things, mobile systems, big data with analytics, cloud computing, collaboration networks, and decision support. Biological metaphors of living and adaptable ecosystems provide the logical foundation for self optimizing and resilient run-time environments for intelligent business services and adaptable distributed information systems with service oriented enterprise architectures. This has a strong impact for architecting digital services and products following both a value-oriented and a service perspective. The change from a closed world modeling world to a more flexible open-world composition and evolution of enterprise architectures defines the moving context for adaptable and high distributed systems, which are essential to enable the digital transformation. The present research paper investigates the evolution of Enterprise Architecture considering new defined value-oriented mappings between digital strategies, digital business models and an improved digital enterprise architecture.
The digitization of our society changes the way we live, work, learn, communicate, and collaborate. This defines the strategical context for composing resilient enterprise architectures for micro-granular digital services and products. The change from a closed-world modeling perspective to more flexible open-world composition and evolution of system architectures defines the moving context for adaptable systems, which are essential to enable the digital transformation. Enterprises are presently transforming their strategy and culture together with their processes and information systems to become more digital. The digital transformation deeply disrupts existing enterprises and economies. Since years a lot of new business opportunities appeared using the potential of the Internet and related digital technologies, like Internet of Things, services computing, cloud computing, big data with analytics, mobile systems, collaboration networks, and cyber physical systems. Digitization fosters the development of IT systems with many rather small and distributed structures, like Internet of Things or mobile systems. In this paper, we are focusing on the continuous bottom-up integration of micro-granular architectures for a huge amount of dynamically growing systems and services, like Internet of Things and Microservices, as part of a new digital enterprise architecture. To integrate micro-granular architecture models to living architectural model versions we are extending more traditional enterprise architecture reference models with state of art elements for agile architectural engineering to support the digitalization of services with related products, and their processes.
In current times, a lot of new business opportunities appeared using the potential of the Internet and related digital technologies, like Internet of Things, services computing, cloud computing, big data with analytics, mobile systems, collaboration networks, and cyber physical systems. Enterprises are presently transforming their strategy, culture, processes, and their information systems to become more digital. The digital transformation deeply disrupts existing enterprises and economies. Digitization fosters the development of IT environments with many rather small and distributed structures, like Internet of Things. This has a strong impact for architecting digital services and products. The change from a closed-world modeling perspective to more flexible open-world and living software and system architectures defines the moving context for adaptable and evolutionary software approaches, which are essential to enable the digital transformation. In this paper, we are putting a spotlight to service oriented software evolution to support the digital transformation with micro granular digital architectures for digital services and products.
Digitization is the use of digital technologies for creating innovative digital business models and transforming existing business models, processes and systems. Digitization creates profound changes in the economy and society. Information is often captured and processed without human intervention using digital means. Digitization impacts nearly all products and services as well as the customer and the value-creation perspective.
Being able to monitor the heart activity of patients during their daily life in a reliable, comfortable and affordable way is one main goal of the personalized medicine. Current wearable solutions lack either on the wearing comfort, the quality and type of the data provided or the price of the device. This paper shows the development of a Textile Sensor Platform (TSP) in the form of an electrocardiogram (ECG)-measuring T-shirt that is able to transmit the ECG signal to a smartphone. The development process includes the selection of the materials, the design of the textile electrodes taking into consideration their electrical characteristics and ergonomy, the integration of the electrodes on the garment and their connection with the embedded electronic part. The TSP is able to transmit a real-time streaming of the ECG-signal to an Android smartphone through Bluetooth Low Energy (BLE). Initial results show a good electrical quality in the textile electrodes and promising results in the capture and transmission of the ECG signal. This is still a working- progress and it is the result of an interdisciplinary master project between the School of Informatics and the School of Textiles & Design of the Reutlingen University.
Modern persistent Key/Value stores are designed to meet the demand for high transactional throughput and high data ingestion rates. Still, they rely on backwards-compatible storage stack and abstractions to ease space management, foster seamless proliferation and system integration. Their dependence on the traditional I/O stack has negative impact on performance, causes unacceptably high write-amplification, and limits the storage longevity.
In the present paper we present NoFTL KV, an approach that results in a lean I/O stack, integrating physical storage management natively in the Key/Value store. NoFTL-KV eliminates backwards compatibility, allowing the Key/Value store to directly consume the characteristics of modern storage technologies. NoFTLKV is implemented under RocksDB. The performance evaluation under LinkBench shows that NoFTL-KV improves transactional throughput by 33%, while response times improve up to 2.3x. Furthermore, NoFTL KV reduces write-amplification 19x and improves storage longevity by imately the same factor.
Digital transformation has changed corporate reality and, with that, firms’ IT environments and IT governance (ITG). As such, the perspective of ITG has shifted from the design of a relatively stable, closed and controllable system of a self-sufficient enterprise to a relatively fluid, open, agile and transformational system of networked co adaptive entities. Related to this paradigm shift in ITG, this paper aims to clarify how the concept of an effective ITG framework has changed in terms of the demand for agility in organizations. Thus, this study conducted 33 qualitative interviews with executives and senior managers from the banking industry in Germany, Switzerland and Austria. Analysis of the interviews focused on the formation of categories and the assignment of individual text parts (codings) to these categories to allow for a quantitative evaluation of the codings per category. Regarding traditional and agile ITG dimensions, 22 traditional and 25 agile dimensions were identified. Moreover, agile strategies within the agile ITG construct and ten ITG patterns were identified from the interview data. The data show relevant perspectives on the implementation of traditional and new ITG dimensions and highlight ambidextrous aspects in ITG frameworks.
Digital transformation has changed corporate reality and, with that, firms’ IT environments and IT governance (ITG). As such, the perspective of ITG has shifted from the design of a relatively stable, closed and controllable System of a self-sufficient Enterprise to a relatively fluid, open, agile and transformational system of networked co-adaptive entities. Related to this paradigm shift in ITG, this paper aims to clarify how the concept of an effective ITG framework has changed in terms of the demand for agility in organizations. Thus, this study conducted 33 qualitative interviews with executives and senior managers from the banking industry in Germany, Switzerland and Austria. Analysis of the interviews focused on the formation of categories and the assignment of individual text parts (codings)
to these categories to allow for a quantitative evaluation of the codings per category. Regarding traditional and agile ITG dimensions, 22 traditional and 25 agile dimensions in terms of structures, processes and relational mechanisms were identified. Moreover, agile strategies within the agile ITG construct and ten ITG patterns were identified from the interview data. The data show relevant perspectives on the implementation of traditional and new ITG dimensions and highlight ambidextrous aspects in ITG in the German-speaking banking industry.
Purpose: This study aims to conceptualize and test the effect of consumers´ perceptions of complaint handling quality (PCHQ) in both traditional and social media channels.
Design/methodology/approach: Study 1 systematically reviews the relevant literature and then carries out a consumer and manager survey. This approach aims to conceptualize the dimensionality of PCHQ. Study 2 tests the effect of PCHQ on key marketing outcomes. Using survey data from a German telecommunications company, the study provides an explanation for the differences in outcomes across traditional (hotline) and social media channels.
Findings: Study 1 reveals that PCHQ is best conceptualized as a five dimensional construct with 15 facets. There are significant differences between customers and managers in terms of the importance attached to the various dimensions. The construct shows strong psychometric properties with high reliability and validity, thereby opening up opportunities to treat these facets as measurement indicators for the construct. Study 2 indicates that the effect of PCHQ on consumer loyalty and word-of-mouth (WOM) communication is stronger in social media than in traditional channels. Procedural justice and the overall quality of service solutions emerge as general dimensions of PCHQ because they are equally important in both channels. In contrast, interactional justice, distributive justice and customer effort have varying effects across the two channels.
Research limitations/implications: This study contributes to the understanding of a firm´s channel selection for complaint handling in two ways. First, it evaluates and conceptualizes the PCHQ construct. Second, it compares the effects of different dimensions of PCHQ on key marketing outcomes across traditional and socialmedia channels.
Practical implications: This study enables managers to understand the difference in efficacy attached to different dimensions of PCHQ. It further highlights such differences across traditional and social media service channels. For example, the effect of complaint handling on social media is of particular importance when generating WOM communication.
Originality/value: This study offers a comprehensive conceptualization of the PCHQ construct and reveals the general and channel contingent effects of its different dimensions on key marketing outcomes.
This research addresses the question of why employees use enterprise social networks (ESN). Against the background of technology acceptance research, we propose an extended unified theory of acceptance and use of technology (UTAUT) model, adapt it to an ESN context, and test our model against data from ESN users of large and medium-sized enterprises. We use partial least squares structural equation modeling to gain insights into the determinants of ESN use. This paper contributes to ESN acceptance research by evaluating a model containing determinants of ESN use. It also examines the effects of determinants on five different usage dimensions of ESN. The results reveal that facilitating conditions are the main driver of ESN use while the impact of intention to use is comparably small. Implications for theory and practice are discussed.
Digital Enterprise Architecture allows multiple viewpoints on a company’s IT landscape. To gain valuable information out of huge amounts of operational data, it is indispensable to have both an understanding of the operations architecture and an engine capable of managing Big Data. The mechanism of understanding huge amounts of data is based on three main steps: collect, process and use. The main idea is focused on extracting valuable information out of Big Data to make better design decisions. The Elastic Stack is an open-source solution to comfortably and quickly handle Big Data scenarios.
A new class of information system architecture, decision-oriented service systems, is spreading more and more. Decision-oriented service systems provide services that support decisions in business processes and products based on the capabilities of cloud-computing environments. To pave the way for the creation of design methods of business processes and products based on decision-oriented service systems, this article introduces a capability-oriented approach. Starting from technological capabilities, more abstract operational and dynamic capabilities are created. The framework created is based on an integrated conceptualization of decision-oriented service systems that allows capturing synergetic effects. By creating the framework, the gap between the technological capabilities of technologies and the strategic goals of enterprises shall be narrowed.
Digital enterprise architecture management in tourism : state of the art and future directions
(2018)
The advance of information technology impacts tourism more than many other industries, due to the service character of its products. Most offerings in tourism are immaterial in nature and challenging in coordination. Therefore, the alignment of IT and strategy and digitization is of crucial importance to enterprises in tourism. To cope with the resulting challenges, methods for the management of enterprise architectures are necessary. Therefore, we scrutinize approaches for managing enterprise architectures based on a literature research. We found many areas for future research on the use of enterprise architecture in tourism.
Blockchains yield to new workloads in database management systems and K/V-stores. Distributed Ledger Technology (DLT) is a technique for managing transactions in ’trustless’ distributed systems. Yet, clients of nodes in blockchain networks are backed by ’trustworthy’ K/V-Stores, like LevelDB or RocksDB in Ethereum, which are based on Log-Structured Merge Trees (LSM Trees). However, LSM-Trees do not fully match the properties of blockchains and enterprise workloads.
In this paper, we claim that Partitioned B-Trees (PBT) fit the properties of this DLT: uniformly distributed hash keys, immutability, consensus, invalid blocks, unspent and off-chain transactions, reorganization and data state / version ordering in a distributed log-structure. PBT can locate records of newly inserted key-value pairs, as well as data of unspent transactions, in separate partitions in main memory. Once several blocks acquire consensus, PBTs evict a whole partition, which becomes immutable, to secondary storage. This behavior minimizes write amplification and enables a beneficial sequential write pattern on modern hardware. Furthermore, DLT implicate some type of log-based versioning. PBTs can serve as MV-store for data storage of logical blocks and indexing in multi-version concurrency control (MVCC) transaction processing.
Active storage
(2018)
In brief, Active Storage refers to an architectural hardware and software paradigm, based on collocation storage and compute units. Ideally, it will allow to execute application-defined data ... within the physical data storage. Thus Active Storage seeks to minimize expensive data movement, improving performance, scalability, and resource efficiency. The effective use of Active Storage mandates new architectures, algorithms, interfaces, and development toolchains.
A transaction is a demarcated sequence of application operations, for which the following properties are guaranteed by the underlying transaction processing system (TPS): atomicity, consistency, isolation, and durability (ACID). Transactions are therefore a general abstraction, provided by TPS that simplifies application development by relieving transactional applications from the burden of concurrency and failure handling. Apart from the ACID properties, a TPS must guarantee high and robust performance (high transactional throughput and low response times), high reliability (no data loss, ability to recover last consistent state, fault tolerance), and high availability (infrequent outages, short recovery times).
The architectures and workhorse algorithms of a high-performance TPS are built around the properties of the underlying hardware. The introduction of nonvolatile memories (NVM) as novel storage technology opens an entire new problem space, with the need to revise aspects such as the virtual memory hierarchy, storage management and data placement, access paths, and indexing. NVM are also referred to as storage-class memory (SCM).
Workshops and tutorials
(2018)
The 19th International Conference on Product-Focused Software Process Improvement (PROFES 2018) hosted two workshops and three tutorials. The workshops and tutorials complemented and enhanced the main conference program, offering a wider knowledge perspective around the conference topics. The topics of the two workshops were Hybrid Development Approaches in Software Systems Development (HELENA) and Managing Quality in Agile & Rapid Software Development Processes (QUaSD). The topics of the tutorials were The human factor in agile transitions – using the personas concept in agile oaching, Process Management 4.0 – Best Practices, and Domain-specific languages for specification, development, and testing of autonomous systems.
Objective: This paper aims at getting an understanding of current problems and challenges with roadmapping processes in companies that are facing volatile markets with innovative products. It also aims at gathering ideas and attempts on how to react to those challenges.
Method: As an initial step towards the objectice a semi-structured expert interview study with a case company in the Smart Home domain was conducted. Four employees from the case company with different roles around product roadmaps have been interviewed and a content analysis of the data has been performed.
Results: The study shows a significant consensus among the interviewees about several major challenges and the necessity to change the traditional roadmapping process and format. The interviewees stated that based on their experience traditional feature-based product roadmaps are increasingly losing their benefits (such as good planning certainty) in volatile environments. Furthermore, the ability to understand customer needs and behaviors has become highly important for creating and adjusting product roadmaps. The interviewees see the need for both, sufficiently stable goals on the roadmap and flexibility with respect to products or features to be developed. To reach this target the interviewees proposed to create roadmaps based on outcome goals instead of product features. In addition, it was proposed to decrease the level of detail of the roadmaps and to emphasize the long-term view. Decisions about which feature to develop should be open as long as possible. Expected benefits of such a new way of product roadmapping are higher user centricity, a stable overall direction, more flexibility with respect to development decisions, and less breaking of commitments.
Context: Organizations increasingly develop software in a distributed manner. The cloud provides an environment to create and maintain software-based products and services. Currently, it is unknown which software processes are suited for cloud-based development and what their effects in specific contexts are.
Objective: We aim at better understanding the software process applied to distributed software development using the cloud as development environment. We further aim at providing an instrument which helps project managers comparing different solution approaches and to adapt team processes to improve future project activities and outcomes.
Method: We provide a simulation model which helps analyzing different project parameters and their impact on projects performed in the cloud. To evaluate the simulation model, we conduct different analyses using a Scrumban process and data from a project executed in Finland and Spain. An extra adaptation of the simulation model for Scrum and Kanban was used to evaluate the suitability of the simulation model to cover further process models.
Results: A comparison of the real project data with the results obtaind from the different simulation runs shows the simulation producing results close to the real data, and we could successfully replicate a distributed software project. Furthermore, we could show that the simulation model is suitable to address further process models.
Conclusion: The simulator helps reproducing activities, developers, and events in the project, and it helps analyzing potential tradeoffs, e.g., regarding throughput, total time, project size, team size and work-in-progress limits. Furthermore, the simulation model supports project managers selecting the most suitable planning alternative thus supporting decision-making processes.
Recognizing actions of humans, reliably inferring their meaning and being able to potentially exchange mutual social information are core challenges for autonomous systems when they directly share the same space with humans. Today’s technical perception solutions have been developed and tested mostly on standard vision benchmark datasets where manual labeling of sensory ground truth is a tedious but necessary task. Furthermore, rarely occurring human activities are underrepresented in such data leading to algorithms not recognizing such activities. For this purpose, we introduce a modular simulation framework which offers to train and validate algorithms on various environmental conditions. For this paper we created a dataset, containing rare human activities in urban areas, on which a current state of the art algorithm for pose estimation fails and demonstrate how to train such rare poses with simulated data only.
Engineers of the research project “Digital Product Life-Cycle” are using a graph-based design language to model all aspects of the product they are working on. This abstract model is the base for all further investigations, developments and implementations. In particular at early stages of development, collaborative decision making is very important. We propose a semantic augmented knowledge space by means of mixed reality technology, to support engineering teams. Therefore we present an interaction prototype consisting of a pico projector and a camera. In our usage scenario engineers are augmenting different artefacts in a virtual working environment. The concept of our prototype contains both an interaction and a technical concept. To realise implicit and natural interactions, we conducted two prototype tests: (1) A test with a low-fidelity prototype and (2) a test by using the method Wizard of Oz. As a result, we present a prototype with interaction selection using augmentation spotlighting and an interaction zoom as a semantic zoom.
Rapid prototyping platforms reduce development time by allowing quick prototyping of a prototype idea and achieve more time for actual application development with user interfaces. This approach has long been followed in technical platforms, such as the Arduino. To transfer this form of prototyping to wearables, WearIT is presented in this paper.WearIT consists of four components as a wearable prototyping platform: (1) a vest, (2) sensor and actuator shields, (3) its own library and (4) a motherboard consisting of Arduino, Raspberry Pi, a board and a GPS module. As a result, a wearable prototype can be quickly developed by attaching sensor and actuator shields to the WearIT vest. These sensor and actuator shields can then be programmed through the WearIT library. Via Virtual Network Computing (VNC) with a remote computer, the screen contents of the Raspberry Pi can be accessed and the Arduino be programmed.
Software engineering courses have to deliver theoretical and technical knowledge and skills while establishing links to practice. However, due to course goals or resource limitations, it is not always possible or even meaningful to set up complete projects and let students work on a real piece of software. For instance, if students shall understand the impact of group dynamics on productivity, a particular software to be developed is of less interest than an environment in which students can learn about team-related phenomena. To address this issue, we use experimentation as a teaching tool in software engineering courses. Experiments help to precisely characterize and study a problem in a systematic way, to observe phenomena, and to develop and evaluate solutions. Furthermore, experiments help establishing short feedback and learning cycles, and they also allow for experiencing risk and failure scenarios in a controlled environment. In this paper, we report on three courses in which we implemented different experiments and we share our experiences and lessons learned. Using these courses, we demonstrate how to use classroom experiments, and we provide a discussion on the feasibility based on formal and informal course evaluations. This experience report thus aims to help teachers integrating small- and medium sized experiments in their courses.
Software and system development faces numerous challenges of rapidly changing markets. To address such challenges, companies and projects design and adopt specific development approaches by combining well-structured methods and flexible agile practices. Yet, the number of methods and practices is large and the actual process composition is often carried out in an ad-hoc manner. This paper reports on a survey on hybrid software development approaches. We study which approaches are used in practice, how different approaches are combined, and what contextual factors influence the use and combination of hybrid software development approaches.
Decentralized energy systems are characterized by an ad hoc planing. The missing integration of energy objectives into business strategy creates difficulties resulting in inefficient energy architectures and decisions. Practice-proven methods such as balanced scorecard, enterprise architecture management and value network approach supports the transformation path towards an effective decentralized system. The methods are evaluated based on a case study. Managing multi-dimensionality, high complexity and multiple actors are the main drivers for an effective and efficient energy management system. The underlying basis to gain the positive impacts of these methods on decentralized corporate energy systems is digitization of energy data and processes.
Background: Internationally, teledermatology has proven to be a viable alternative to conventional physical referrals. Travel cost and referral times are reduced while patient safety is preserved. Especially patients from rural areas benefit from this healthcare innovation. Despite these established facts and positive experiences from EU neighboring countries like the Netherlands or the United Kingdom, Germany has not yet implemented store-and-forward teledermatology in routine care.
Methods: The TeleDerm study will implement and evaluate store-and-forward teledermatology in 50 general practitioner (GP) practices as an alternative to conventional referrals. TeleDerm aims to confirm that the possibility of store-and-forward teledermatology in GP practices is going to lead to a 15% (n = 260) reduction in referrals in the intervention arm. The study uses a cluster-randomized controlled trial design. Randomization is planned for the cluster “county”. The main observational unit is the GP practice. Poisson distribution of referrals is assumed. The evaluation of secondary outcomes like acceptance, enablers and barriers uses a mixed methods design with questionnaires and interviews.
Discussion: Due to the heterogeneity of GP practice organization, patient management software, information technology service providers, GP personal technical affinity and training, we expect several challenges in implementing teledermatology in German GP routine care. Therefore, we plan to recruit 30% more GPs than required by the power calculation. The implementation design and accompanying evaluation is expected to deliver vital insights into the specifics of implementing telemedicine in German routine care.
With the digital transformation being one of the most discussed topics in the business world today, many enterprises – especially small and medium sized ones – find themselves struggling with the understanding of new digital technologies and thus the potential benefits and risks for their companies. New technologies like the Internet of Things, Blockchain or Machine Learning have great potential for businesses. However, carefully evaluating and selecting purposeful technologies – aligned to the digital strategy – is the key to success. Technologies appear, change and also vanish so rapidly in the digital age, that a proper understanding is crucial for a sustainable technological foundation. Focusing on the characteristic features of technologies, the presented approach promises to create a better technological understanding for decision makers in small and medium-sized enterprises (SMEs) in a playful manner: With a serious game that fosters insight and allays fears of digitalization.
Container virtualization evolved into a key technology for deployment automation in line with the DevOps paradigm. Whereas container management systems facilitate the deployment of cloud applications by employing container based artifacts, parts of the deployment logic have been applied before to build these artifacts. Current approaches do not integrate these two deployment phases in a comprehensive manner. Limited knowledge on application software and middleware encapsulated in container-based artifacts leads to maintainability and configuration issues. Besides, the deployment of cloud applications is based on custom orchestration solutions leading to lock in problems. In this paper, we propose a two-phase deployment method based on the TOSCA standard. We present integration concepts for TOSCA-based orchestration and deployment automation using container-based artifacts. Our two-phase deployment method enables capturing and aligning all the deployment logic related to a software release leading to better maintainability. Furthermore, we build a container management system, which is composed of a TOSCA-based orchestrator on Apache Mesos, to deploy container-based cloud applications automatically.
The state of the art proposes the microservices architectural style to build applications. Additionally, container virtualization and container management systems evolved into the perfect fit for developing, deploying, and operating microservices in line with the DevOps paradigm. Container virtualization facilitates deployment by ensuring independence from the runtime environment. However, microservices store their configuration in the environment. Therefore, software developers have to wire their microservice implementation with technologies provided by the target runtime environment such as configuration stores and service registries. These technological dependencies counteract the portability benefit of using container virtualization. In this paper, we present AUTOGENIC - a model-based approach to assist software developers in building microservices as self configuring containers without being bound to operational technologies. We provide developers with a simple configuration model to specify configuration operations of containers and automatically generate a self-configuring microservice tailored for the targeted runtime environment. Our approach is supported by a method, which describes the steps to automate the generation of self-configuring microservices. Additionally, we present and evaluate a prototype, which leverages the emerging TOSCA standard.
The focus of the developed maturity model was set on processes. The concept of the widespread CMM and its practices has been transferred to the perioperative domain and the concept of the new maturity model. Additional optimization goals and technological as well as networking-specific aspects enable a process- and object-focused view of the maturity model in order to ensure broad coverage of different subareas. The evaluation showed that the model is applicable to the perioperative field. Adjustments and extensions of the maturity model are future steps to improve the rating and classification of the new maturity model.
Enterprise Governance, Risk and Compliance (GRC) systems are key to managing risks threatening modern enterprises from many different angles. Key constituent to GRC systems is the definition of controls that are implemented on the different layers of an Enterprise Architecture (EA). As part of the compliance aspect of GRC, the effectiveness of these controls is assessed and reported to relevant management bodies within the enterprise. In this paper we present a metamodel which links controls to the affected elements of an EA and supplies a way of expressing associated assessment techniques and results. We complement the metamodel with an expository instantiation in a cockpit for control compliance applied in an international enterprise in the insurance industry.
Modeling interactive Enterprise Architecture visualizations: an extended architecture description
(2018)
Enterprise architectures consist of a multitude of architecture elements, which relate in manifold ways to each other. Due to the high number of relationships between these elements, architectural analysis mechanisms are essential for all stakeholders to keep track and to work out relevant model characteristics. In practice EAs are often analyzed using visualizations by hand. However, the visualizations are often static and there are only few interaction possibilities. As a result, new visualizations have to be created or configured by experts if information demands change. In addition, hardly any tools are used for analysis of complex model characteristics. In this article we introduce an extended conceptualization of the architecture description that defines the structure of interactive visualizations and the integration of further tools to flexibly respond to the information demands of stakeholders. In addition, we develop a so-called Architecture Cockpit that realizes the extended conceptualization in a prototype. At the end we demonstrate and evaluate our approach through a practical test in a company in the finance and insurance industry.
Context: Software product lines are widely used in automotive embedded software development. This software paradigm improves the quality of software variants by reuse. The combination of agile software development practices with software product lines promises a faster delivery of high quality software. However, the set up of an agile software product line is still challenging, especially in the automotive domain. Goal: This publication aims to evaluate to what extend agility fits to automotive product line engineering. Method: Based on previous work and two workshops, agility is mapped to software product line concerns. Results: This publication presents important principles of software product lines, and examines how agile approaches fit to those principles. Additionally, the principles are related to one of the four major concerns of software product line engineering: Business, Architecture, Process, and Organization. Conclusion: Agile software product line engineering is promising and can add value to existing development approaches. The identified commonalities and hindering factors need to be considered when defining a combined agile product line engineering approach.
An assessment model to foster the adoption of agile software product lines in the automotive domain
(2018)
A software product line is commonly used for the software development in large automotive organizations. A strategic reuse of software is needed to handle the increasing complexity of the development and to maintain the quality of numerous software variants. However, the development process needs to be continuously adapted at a fast pace to satisfy the changing market demands. Introducing agile software development methods promise the flexibility to react on customers’ change requests and market demands to deliver high quality software. Despite this need, it is still challenging to combine agile software development and product lines. The maturity of an agile adoption is often hard to determine. Assessing the current situation regarding the combination is a first step towards a successful inclusion of agile methods into automotive software product lines. Based on an interview study with 16 participants and a literature review, we build the so-called ASPLA Model allowing self-assessments within the team to determine the current state of agile software development in combination with software product lines. The model comprises seven areas of improvement and recommends a possibility to improve the current status.
Combining agile development and software product lines in automotive: challenges and recommendations
(2018)
Software product lines (SPLs) are used throughout the automotive industry. SPLs help to manage the large number of variants and to improve quality by reuse. In order to develop high quality software faster, agile software development (ASD) practices are introduced. From both the research and the management point of view it is still not clear how these two approaches can be combined. We derive recommendations to combine ASD and SPLs based on challenges identified for an automotive specific model. This study combines the outcome of a literature review and a qualitative interview study with 16 practitioners from the automotive domain. We evaluate the results and analyze the relationship between ASD and SPLs in the automotive domain. Furthermore, we derive recommendations to combine ASD and SPLs based on challenges identified in the automotive domain. This study identifies 86 individual challenges. Important challenges address supplier collaboration and faster software release cycles without loss of quality. The identified challenges and the derived recommendations show that the combination of ASD and SPL in the automotive industry is promising but not trivial. There is a need for an automotive-specific approach that combines ASD and SPL.
Back to the future: origins and directions of the “Agile Manifesto” – views of the originators
(2018)
In 2001, seventeen professionals set up the manifesto for agile software development. They wanted to define values and basic principles for better software development. On top of brought into focus, the manifesto has been widely adopted by developers, in software-developing organizations and outside the world of IT. Agile principles and their implementation in practice have paved the way for radical new and innovative ways of software and product development. In parallel, the understanding of the manifesto’s underlying principles evolved over time. This, in turn, may affect current and future applications of agile principles. This article presents results from a survey and an interview study in collaboration with the original contributors of the manifesto for agile software development. Furthermore, it comprises the results from a workshop with one of the original authors. This publication focuses on the origins of the manifesto, the contributors’ views from today’s perspective, and their outlook on future directions. We evaluated 11 responses from the survey and 14 interviews to understand the viewpoint of the contributors. They emphasize that agile methods need to be carefully selected and agile should not be seen as a silver bullet. They underline the importance of considering the variety of different practices and methods that had an influence on the manifesto. Furthermore, they mention that people should question their current understanding of "agile" and recommend reconsidering the core ideas of the manifesto.
The need for creating digitally enhanced products, services, and experiences as well as the emergence of new or modified business models has a significant impact on the automotive domain. Innovative solutions and new topics such as Smart Mobility or Connectivity require current automotive development processes to undergo major changes. They need to be redesigned in a way that it is possible to learn and adapt continuously at a fast pace. Agile methods are promising approaches to address these new challenges. However, agile methods are not tailored to the specific characteristics of the automotive domain such as software product line (SPLs) development. Although, there have been efforts to apply agile methods in the automotive domain, widespread adoptions have not yet taken place.
Early reduction of risks in a startup or an innovation project is highly important. Appropriate means for risk reduction, such as testing business models with different kinds of experiments exist. However, deciding what to test and how to select the right test, is challenging for many startups and innovation projects. This article presents the so-called Business Experiments Navigator (BEN), a toolkit to assist startup and innovation processes. It compliments other tools such as the Business Model Canvas or the Lean Startup process. The main contribution of BEN is to bridge the gap between the riskiest assumptions of a business model and the multitude of available testing techniques by providing assumption templates. The Business Experiments Navigator has been validated in several workshops. Results show that it creates awareness among the workshop participants that a business model is based on assumptions which impose risks and need to be validated. Further, users of BEN were able to identify relevant assumptions and map different kinds of assumptions to appropriate testing techniques. The process applied in the workshops, as well as the assumption templates, helped the participants understand the main concepts and transfer their learnings, to their own business ideas.
Creating new business models, products or services is challenging in fast changing unpredictable environments. Often, product teams need to make many assumptions (e.g., assumptions about future demands) that might not be true. These assumptions impose risks to the success and these risks need to be mitigated early. One of the principles of the Lean Startup approach is to identify and prioritize the riskiest assumptions in order to validate them as early as possible. This helps to avoid wasting effort and time. In the literature there are several different methods for identifying and prioritizing the riskiest assumptions reported. However, only little research exists about the practical application of these methods in practice and how to teach them. In this paper, we present and empirically analyze a workshop format that we have developed for teaching the prioritization of Lean Startup assumptions. We aim at raising the awareness for assumption thinking among the participants and teach them through group work how to prioritize assumptions. The results of the analysis of a multitude of conducted workshops show that the applied method did lead to reasonable results and accompanying learning effects. In addition, the participants got aware of assumption thinking and liked learning in a practical way.
As production workspaces become more mobile and dynamic it becomes increasingly important to reliably monitor the overall state of the environment. Therein manipulators or other robotic systems likely have to be able to act autonomously together with humans and other systems within a joint workspace. Such interactions require that all components in non-stationary environments are able to perceive the state relative to each other. As vision-sensors provide a rich source of information to accomplish this, we present RoPose, a convolutional neural network (CNN) based approach, to estimate the two dimensional joint configuration of a simulated industrial manipulator from a camera image. This pose information can further be used by a novel targetless calibration setup to estimate the pose of the camera relative to the manipulator’s space. We present a pipeline to automatically generate synthetic training data and conclude with a discussion of the potential usage of the same pipeline to acquire real image datasets of physically existent robots.
We present an approach for segmenting individual cells and lamellipodia in epithelial cell clusters using fully convolutional neural networks. The method will set the basis for measuring cell cluster dynamics and expansion to improve the investigation of collective cell migration phenomena. The fully learning-based front-end avoids classical feature engineering, yet the network architecture needs to be designed carefully. Our network predicts how likely each pixel belongs to one of the classes and, thus, is able to segment the image. Besides characterizing segmentation performance, we discuss how the network will be further employed.
Sleep study can be used for detection of sleep quality and in general bed behaviors. These results can helpful for regulating sleep and recognizing different sleeping disorders of human. In comparison to the leading standard measuring system, which is Polysomnography (PSG), the system proposed in this work is a non-invasive sleep monitoring device. For continuous analysis or home use, the PSG or wearable Actigraphy devices tends to be uncomfortable. Besides, these methods not only decrease practicality due to the process of having to put them on, but they are also very expensive. The system proposed in this paper classifies respiration and body movement with only one type of sensor and also in a noninvasive way. The sensor used is a pressure sensor. This sensor is low cost and can be used for commercial proposes. The system was tested by carrying out an experiment that recorded the sleep process of a subject. These recordings showed excellent results in the classification of breathing rate and body movements.
The relative pros and cons of using students or practitioners in experiments in empirical software engineering have been discussed for a long time and continue to be an important topic. Following the recent publication of “Empirical software engineering experts on the use of students and professionals in experiments” by Falessi, Juristo, Wohlin, Turhan, Münch, Jedlitschka, and Oivo (EMSE, February 2018) we received a commentary by Sjøberg and Bergersen. Given that the topic is of great methodological interest to the community and requires nuanced treatment, we invited two editorial board members, Martin Shepperd and Per Runeson, respectively, to provide additional views.
Empirical software engineering experts on the use of students and professionals in experiments
(2018)
Using students as participants remains a valid simplification of reality needed in laboratory contexts. It is an effective way to advance software engineering theories and technologies but, like any other aspect of study settings, should be carefully considered during the design, execution, interpretation, and reporting of an experiment. The key is to understand which developer population portion is being represented by the participants in an experiment. Thus, a proposal for describing experimental participants is put forward.
Software engineering education is supposed to provide students with industry-relevant knowledge and skills. Educators must address issues beyond exercises and theories that can be directly rehearsed in small settings. A way to experience such effects and to increase the relevance of software engineering education is to apply empirical studies in teaching. In our article, we show how different types of empirical studies can be used for educational purposes in software engineering. We give examples illustrating how to utilize empirical studies, discuss challenges, and derive an initial guideline that supports teachers to include empirical studies in software engineering courses.