Refine
Year of publication
- 2018 (201) (remove)
Document Type
- Conference proceeding (89)
- Journal article (75)
- Book chapter (20)
- Working Paper (9)
- Book (3)
- Doctoral Thesis (2)
- Issue of a journal (2)
- Report (1)
Has full text
- yes (201) (remove)
Is part of the Bibliography
- yes (201)
Institute
- Informatik (74)
- ESB Business School (46)
- Technik (36)
- Texoversum (22)
- Life Sciences (21)
Publisher
- Springer (39)
- IEEE (37)
- Hochschule Reutlingen (15)
- Elsevier (8)
- MDPI (7)
- RWTH Aachen (7)
- De Gruyter (5)
- Hanser (4)
- MIT Center for Information Systems Research (4)
- VDE Verlag (4)
Im Rahmen dieser Arbeit wurde eine Software-Architektur entwickelt, mit der sich Interaktionen zwischen autonomen Fahrzeugen und Passanten im Straßenverkehr in einer simulierten Umgebung untersuchen lassen. Hierbei wird das autonome Fahrzeug durch einen externen Fahrsimulator gesteuert. Der Einsatz eines Motion-Capture-Systems ermöglicht dabei die Aufzeichnung und Übertragungen der Bewegungsdaten von Passant und Fahrer in die virtuelle Umgebung. Durch den Einsatz von head-mounted Displays sollen Akteure die virtuelle Umgebung möglichst als real empfinden. Auf Basis der entwickelten Software-Architektur wurde eine Simulationsumgebung realisiert, in der Interaktionen zwischen einem Passant und einem autonomem Fahrzeug untersucht werden können. Das Projekt soll das Potential von Motion-Capture gestützten Simulationsumgebungen für die Konzeption und Entwicklung von autonomen Fahrsystemen aufzeigen.
Über die letzten Jahre nehmen die Verkehrsunfälle zwischen Fahrzeugen und Fahrrädern und Motorrädern immer weiter zu. Die Ursache ist meistens eine unachtsam geöffnete Fahrzeugtür, mit der ein anfahrender Zweiradfahrer kollidiert. Diese Unfälle können verheerende Folgen für alle Beteiligten haben. Aus diesem Grund soll der technologische Fortschritt, welcher sich durch die gesamte Automobilbranche zieht, um eine zusätzliche Komponente erweitert werden. Hierbei handelt es sich um ein System für Zweiradfahrer, welches eine sich öffnende Fahrzeugtür frühzeitig erkennen soll, den Fahrer somit frühzeitig warnen kann und gegebenenfalls Strategien zu Unfallvermeidung einleiten kann. Dieses Konzept soll die Entwicklung des Systems vorgeben und grundlegend erläutern.
Die Navigation mit dem E-Bike soll eine positive Nutzerfahrung sein. Deshalb wurde im Zuge dieser Arbeit im Rahmen von Bosch E-Bike Systems ein multimodales smart User Interface (MSUI) entwickelt. Das Konzept umfasst visuelle Turn-by-Turn Signale, taktile Vibrationssignale im Lenker und eine auditive Sprachausgabe. Ziel der Arbeit ist ein Prototyp, der sich für die Evaluation von Nutzerbedürfnissen in Bezug auf verschiedene multimodale Rückmeldemöglichkeiten eignet.
Die Simulation menschlichen Gruppenverhaltens kann bei der Kapazitäten-, Risiko- und Evakuierungs Planung von Gebäuden hilfreich sein, bei der Produktion von Filmen für eindrucksvolle Massen-Szenen eingesetzt werden oder virtuelle Schauplätze in Echtzeit-Anwendungen beleben. Die Herausforderungen liegen vor allem in einem realistischen Erscheinungsbild der virtuellen Crowd, glaubwürdigem Verhalten innerhalb eines sozialen Verbundes, realitätsnahen Animationen und der Wahrung der Echtzeitfähigkeit interaktiver Anwendungen. Im Rahmen dieser Arbeit wird der aktuelle Stand der Technik vorgestellt, Technologien evaluiert und ein Crowd Simulation Prototyp mit der Unity Engine implementiert.
Die Bedeutung und Stellung der Informationstechnologie erlebte in den letzten 60 Jahren einen fortlaufenden Wandel. Der anfänglich rein unterstützende Charakter entwickelte sich immer mehr zu einem wichtigen Bestandteil der Aufbau- und Ablauforganisation im Unternehmen. Ein definiertes IT-Servicemanagement im Unternehmen sieht sich mittlerweile gleichgeordnet mit den restlichen Fachabteilungen, tritt mit seinen Leistungen als Dienstleister auf und betrachtet die Fachabteilungen als „Kunde“. Neue Technologien und Innovationen und die daraus resultierenden Neudefinitionen bestehender Anforderungen sollen im Rahmen der Digitalisierung in Unternehmen positive Effekte zeigen. IT Infrastructure Library (ITIL) wird als Framework für IT-Servicemanagement in der Industrie und im öffentlichen Dienst genutzt. Der Ansatz von ITIL unterstützte den Kulturwandel und sensibilisierte das Management und die Mitarbeiter darin, serviceorientiert zu denken. Da dieser Ansatz einen vordefinierten, zyklischen Ablauf hat, könnten schnell eintreffende Kundenanforderungen nicht fristgerecht umgesetzt werden, weshalb agile Methoden wie der DevOps-Ansatz in den Vordergrund rücken. Die Herausforderung besteht darin, den Kulturwandel bei der Einführung von DevOps in bestehenden ITIL-Strukturen in Unternehmen zu fördern.
Eines der gängigsten bildgebenden Verfahren in der Medizin ist die Sonografie. Jedoch ist die Reproduzierbarkeit der Ultraschalldiagnostik bis heute noch immer ein Problem, wodurch Fehldiagnosen gestellt werden. Durch das in diesem Papier vorgestellte prototypische System zur Unterstützung für Medizinstudenten in Ultraschallseminaren sollen Anforderungen zur Reproduzierbarkeit einer Ultraschalluntersuchung definiert werden. Durch Experteninterviews wurden Einblicke in die klinischen Abläufe und den Krankenhaus-Alltag gewonnen, welche Inhalte relevant sind, um die Reproduzierbarkeit von Ultraschalluntersuchungen zu ermöglichen.
Durch das stetige Wachstum an neuen Technologien und Möglichkeiten steht der Verschmelzung von Technologien mit dem Menschen kaum noch etwas im Wege. Die Untersuchung der Implantate und die damit verbundenen Risiken sind ein Teil dieser Arbeit. Von Bedeutung sind hier die Funktionsweise und die IT-Sicherheitsaspekte. Alle in dieser Arbeit dargestellten Implantate benötigen eine Kommunikation nach außen. Diese Kommunikationsmöglichkeit birgt Risiken, die nicht nur auf die Daten der Träger beschränkt sind, sondern auch gesundheitliche Risiken beinhalten.
Segmentierung von Polypen in Koloskopie-Bilddaten : eine Potentialanalyse von Deep-Learning-Methoden
(2018)
Kolorektale Karzinome haben eine hohe Sterblichkeitsrate, wenn sie spät entdeckt werden. Eine frühzeitige Entfernung von bösartigen Polypen im Magen-Darm-Trakt, die deren Vorstufen bilden, bietet jedoch hohe Überlebenschancen. Bei Darmspiegelungen werden gerade kleine Polypen aber recht häufig übersehen. Zuverlässige bildverarbeitende Systeme, die Polypen in einem Koloskopie-Frame nicht nur detektieren, sondern pixelgenau segmentieren, könnten Ärzten bei Darmkrebs-Screenings helfen. Diese Arbeit analysiert den aktuellen Stand der Segmentierung von Polypen im Gastrointestinaltrakt. Weiterführend wird untersucht, inwiefern die in letzter Zeit sehr erfolgreichen Methoden des Deep Learning hier Vorteile bieten.
Im Projekt "Heat4SmartGrid" soll untersucht werden, ob und wie mit Hilfe von Wärmepumpen der Anteil erneuerbarer Energien an der Wärmeversorgung in Baden-Württemberg (BW) gesteigert werden und gleichzeitig das Verteilnetz durch eine intelligente Steuerung der Wärmepumpensysteme entlastet werden kann. Hierzu ist im AP 1 für das Jahr 2050 ein Wärmebedarf in BW von 35 TWh errechnet worden, bei 40 TWh im Jahr 2030. Im Vergleich zum Jahr 2015 ergibt sich so ein Rückgang um 30 % zum Jahr 2030 und bis zum Jahr 2050 um 40 %. Weiterhin steigt auf Grund von energetischer Sanierung im Gebäudebestand das technische Potenzial für Wärmepumpen, ausgehend von 8 TWh im Jahr 2015, auf 20 TWh bis 2030 und auf 23 TWh bis 2040. Insgesamt könnten so 63 % aller Wohnanteile in BW durch Wärmepumpen mit thermischer Energie versorgt werden. Der Einsatz von Wärmepumpensystemen ist somit ein wichtiger Baustein für das Gelingen der Wärmewende. Zur Steuerung der Wärmepumpen sind in AP 2 Betriebsmodi in Abhängigkeit von Anwendung und Gebäudetyp entwickelt worden. Diese werden mittels Korrelationsfunktionen für die Heizleistung für Luft-Wasser- und Sole-Wasser-Wärmepumpen bestimmt. Hierauf aufbauend sind für die in AP 1 ermittelten Gebäudetypen die erreichbare Jahresarbeitszahl der beiden Wärmepumpentechnologien ermittelt worden. Zur intelligenten system- und netzdienlichen Steuerung dieser Wärmepumpensysteme werden Prognosen über die lokale Erzeugung und den lokalen Verbrauch benötigt, die in AP 5 erarbeitet werden. In Abhängigkeit der Prognose-anwendung sind sowohl univariate (elektrische Last und thermische Brauchwarmwasserlast) als auch multivariate Prognosemodelle (PV-Erzeugung und thermische Heizwarmwasserlast) implementiert worden.
In dem vorliegenden Zwischenbericht sind die Arbeiten und Ergebnisse zusammengefasst, die im Rahmen des Projektes GalvanoFlex_BW während der ersten acht Projektmonate der insgesamt 2 1/2 jährigen Laufzeit durchgeführt und erzielt wurden. Ziel des Projektes ist die Untersuchung und Verbesserung der Energieeffizienz in Industrieunternehmen mit dem speziellen Fokus auf der Einführung stromoptimiert betriebener KWK-Anlagen. Entsprechend des Arbeits- und Zeitplans sind die Literaturrecherche, die Festlegung von Prozesstypen, die Datenerfassung, die Strategieentwickung zur stromoptimierten KWK, die Optimierung der Schnittstelle zwischen KWK und Gleichrichtern, der Aufbau der Branchenplattform und die sozial-wissenschaftliche Begleitforschung beschrieben. Der aktuelle Projektstand deckt sich dabei im Wesentlichen mit den Vorgaben aus dem vorgelegten Zeitplan.
Informatics Inside : Connect(IT) : Informatik-Konferenz an der Hochschule Reutlingen, 9. Mai 2018
(2018)
Mit der Informatics Inside 2018 findet diese Veranstaltungsform bereits zum 10. Mal statt und wir freuen uns besonders auf dieses Jubiläum. Die diesjährige Konferenz steht unter dem Motto "connect(IT)" und zeigt damit einmal mehr die zentrale Bedeutung der Informatik im Zusammenhang mit Vernetzungen und dies auf allen Ebenen. Es geht nicht nur um die technische Vernetzung von Maschinen und Services, sondern auch um die Vernetzung von Menschen untereinander und die Zusammenarbeit zwischen Mensch und Maschine. Gerade die letzten beiden Punkte spiegeln einen der Schwerpunkte des Masterstudiengangs Human-Centered Computing sehr schön wieder. Sie finden in dem vorliegenden Tagungsband Fachbeiträge aus dem medizinischen Umfeld ebenso wie vielfältige Anwendungen aus dem Fahrzeugsektor. Selbstverständlich spielt das Thema Sicherheit in vernetzten Umgebungen eine wichtige Rolle und auch dazu finden Sie einen spannenden Beitrag. Der Kulturwandel im Bereich der Softwareentwicklung ist ebenso ein Thema wie Simulationen in verschiedenen Zusammenhängen.
Die Informatics Inside ist eine wissenschaftliche Konferenz des Masterstudiengangs Human-Centered Computing und wird von den Studierenden organisiert und durchgeführt. Sie erhalten während ihres Masterstudiums die Gelegenheit, sich in einem Fachgebiet ihrer Wahl zu vertiefen. Dies kann an der Hochschule, in einem Unternehmen, einem Forschungsinstitut oder im Ausland durchgeführt werden. Gerade diese flexible Ausgestaltung der Lehrveranstaltung "Wissenschaftliche Vertiefung" führt zu vielfältigen Themenfeldern, die von den Studierenden bearbeitet werden. Neben der eigentlichen fachlichen Vertiefung spielt auch die Präsentation von wissenschaftlichen Ergebnissen eine wichtige Rolle und dies nicht nur während des Studiums. Ein gewähltes Fachgebiet so allgemeinverständlich aufzubereiten und zu vermitteln, dass es auch für Nicht-Spezialisten verständlich wird, stellt immer wieder eine besondere Herausforderung dar.
In the last 20 years there have been major advances in autonomous robotics. In IoT (Industry 4.0), mobile robots require more intuitive interaction possibilities with humans in order to expand its field of applications. This paper describes a user-friendly setup, which enables a person to lead the robot in an unknown environment. The environment has to be perceived by means of sensory input. For realizing a cost and resource efficient Follow Me application we use a single monocular camera as low-cost sensor. For efficient scaling of our Simultaneous Localization and Mapping (SLAM) algorithm, we integrate an inertial measurement unit (IMU) sensor. With the camera input we detect and track a person. We propose combining state of the art deep learning with Convolutional Neural Network (CNN) and SLAM algorithms functionality on the same input camera image. Based on the output robot navigation is possible. This work presents the specification, workflow for an efficient development of the Follow Me application. Our application’s delivered point clouds are also used for surface construction. For demonstration, we use our platform SCITOS G5 equipped with the afore mentioned sensors. Preliminary tests show the system works robustly in the wild.
SLAM systems are mainly applied for robot navigation while research on feasibility for motion planning with SLAM for tasks like bin-picking, is scarce. Accurate 3D reconstruction of objects and environments is important for planning motion and computing optimal gripper pose to grasp objects. In this work, we propose the methods to analyze the accuracy of a 3D environment reconstructed using a LSD-SLAM system with a monocular camera mounted onto the gripper of a collaborative robot. We discuss and propose a solution to the pose space conversion problem. Finally, we present several criteria to analyze the 3D reconstruction accuracy. These could be used as guidelines to improve the accuracy of 3D reconstructions with monocular LSD-SLAM and other SLAM based solutions.
We present a new method for detecting gait disorders according to their stadium using cluster methods for sensor data. 21 healthy and 18 Parkinson subjects performed the time up and go test. The time series were segmented into separate steps. For the analysis the horizontal acceleration measured by a mobile sensor system was considered. We used dynamic time warping and hierarchical custering to distinguish the stadiums. A specificity of 92% was achieved.
Auf jeder Stufe der Lebensmittelkette muss von der Herstellung bis zum Inverkehrbringen eine Rückverfolgung der Produkte möglich sein. Erzeuger, Verarbeiter, Transportunternehmen und Händler stehen vor der Herausforderung, Systeme zur Rückverfolgbarkeit effizient in ihre Unternehmensprozesse zu integrieren und gegenseitig zu vernetzen. Für die betriebliche Umsetzung werden die rechtlichen Anforderungen skizziert und die Grundlagen eines Rückverfolgbarkeitssystems vorgestellt.
Research and Development (R&D) is crucial for the growth and future success of research-based pharma companies. To maintain their R&D organisations efficient, pharmaceutical companies started to hedge the potential of open innovation to cut R&D costs and to access external knowledge. These new strategies could be divided into several categories: open source, innovation centres, crowd sourcing and virtual R&D.
Fitting 3D Morphable Face Models (3DMM) to a 2D face image allows the separation of face shape from skin texture, as well as correction for face expression. However, the recovered 3D face representation is not readily amenable to processing by convolutional neural networks (CNN). We propose a conformal mapping from a 3D mesh to a 2D image, which makes these machine learning tools accessible by 3D face data. Experiments with a CNN based face recognition system designed using the proposed representation have been carried out to validate the advocated approach. The results obtained on standard benchmarking data sets show its promise.
In this exploratory research eight suppliers in the automotive industry are interviewed to measure the application of supply chain finance instruments in their supply chain in the Netherlands and the region of South-West Germany. Current adoption levels and reasons for non adoption are discussed. Based on these indicative results, a set of hypotheses is suggested for further research. The theoretical base of this study is a conceptual model of Supply Chain Finance based on literature research and empirical research in the Netherlands.
Early reduction of risks in a startup or an innovation project is highly important. Appropriate means for risk reduction, such as testing business models with different kinds of experiments exist. However, deciding what to test and how to select the right test, is challenging for many startups and innovation projects. This article presents the so-called Business Experiments Navigator (BEN), a toolkit to assist startup and innovation processes. It compliments other tools such as the Business Model Canvas or the Lean Startup process. The main contribution of BEN is to bridge the gap between the riskiest assumptions of a business model and the multitude of available testing techniques by providing assumption templates. The Business Experiments Navigator has been validated in several workshops. Results show that it creates awareness among the workshop participants that a business model is based on assumptions which impose risks and need to be validated. Further, users of BEN were able to identify relevant assumptions and map different kinds of assumptions to appropriate testing techniques. The process applied in the workshops, as well as the assumption templates, helped the participants understand the main concepts and transfer their learnings, to their own business ideas.
The coculture of osteogenic and angiogenic cells and the resulting paracrine signaling via soluble factors are supposed to be crucial for successfully engineering vascularized bone tissue equivalents. In this study, a coculture system combining primary human adiposederived stem cells (hASCs) and primary human dermal microvascular endothelial cells (HDMECs) within two types of hydrogels based on methacryloyl‐modified gelatin (GM) as three‐dimensional scaffolds was examined for its support of tissue specific cell functions. HDMECs, together with hASCs as supporting cells, were encapsulated in soft GM gels and were indirectly cocultured with hASCs encapsulated in stiffer GM hydrogels additionally containing methacrylate‐modified hyaluronic acid and hydroxyapatite particles. After 14 days, the hASC in the stiffer gels (constituting the “bone gels”) expressed matrix proteins like collagen type I and fibronectin, as well as bone‐specific proteins osteopontin and alkaline phosphatase. After 14 days of coculture with HDMEC‐laden hydrogels, the viscoelastic properties of the bone gels were significantly higher compared with the gels in monoculture. Within the soft vascularization gels, the formed capillary‐like networks were significantly longer after 14 days of coculture than the structures in the control gels. In addition, the stability as well as the complexity of the vascular networks was significantly increased by coculture. We discussed and concluded that osteogenic and angiogenic signals from the culture media as well as from cocultured cell types, and tissue‐specific hydrogel composition all contribute to stimulate the interplay between osteogenesis and angiogenesis in vitro and are a basis for engineering vascularized bone.
This paper investigates the evaluation of dense 3D face reconstruction from a single 2D image in the wild. To this end, we organise a competition that provides a new benchmark dataset that contains 2000 2D facial images of 135 subjects as well as their 3D ground truth face scans. In contrast to previous competitions or challenges, the aim of this new benchmark dataset is to evaluate the accuracy of a 3D dense face reconstruction algorithm using real, accurate and high-resolution 3D ground truth face scans. In addition to the dataset, we provide a standard protocol as well as a Python script for the evaluation. Last, we report the results obtained by three state-of-the-art 3D face reconstruction systems on the new benchmark dataset. The competition is organised along with the 2018 13th IEEE Conference on Automatic Face & Gesture Recognition.
An interactive clothing design and a personalized virtual display with user’s own face are presented in this paper to meet the requirement of personalized clothing customization. A customer interactive clothing design approach based on genetic engineering ideas is analyzed by taking suit as an example. Thus, customers could rearrange the clothing style elements, chose available color, fabric and come up with their own personalized suit style. A web 3D customization prototype system of personalized clothing is developed based on the Unity3D and VR technology. The layout of the structure and functions combined with the flow of the system are given. Practical issues such as 3D face scanning, suit style design, fabric selection, and accessory choices are addressed also. Tests to the prototype system indicate that it could show realistic clothing and fabric effect and offer effective visual and customization experience to users.
Completely defined co-culture of adipogenic differentiated ASCs and microvascular endothelial cells
(2018)
Vascularized adipose tissue models are in high demand as alternatives to animal models to elucidate the mechanisms of widespread diseases, screen for new drugs or assess drug safety levels. Animal-derived sera such as fetal bovine serum (FBS), which are commonly used in these models, are associated with ethical concerns, risk of contaminations and inconsistencies of their composition and impact on cells. In this study, we developed a serum-free, defined co culture medium and implemented it in an adipocyte/endothelial cell (EC) co culture model.
Human adipose-derived stem cells were differentiated under defined conditions (diffASCs) and, like human microvascular ECs (mvECs), cultured in a defined co culture medium in mono-, indirect or direct co-culture for 14 days. The defined co-culture medium was superior when compared to mono-culture media and facilitated the functional maintenance and maturation of diffASCs including perilipin A expression, lipid accumulation, and also glycerol and leptin release. The medium also allowed mvEC maintenance, confirmed by the expression of CD31 and von Willebrand factor (vWF), and by acetylated low density lipoprotein (acLDL) uptake. Thereby, mvECs showed strong dependence on EC-specific factors. Additionally, mvECs formed vascular structures in direct co-culture with diffASCs.
The completely defined co-culture system allows for the serum-free culture of adipocyte/EC co-cultures and thereby represents a valuable and ethically acceptable tool for the culture and study of vascularized adipose tissue models.
To date, special interest has been paid to composite scaffolds based on polymers enriched with hydroxyapatite (HA). However, the role of HA containing different trace elements such as silicate in the structure of a polymer scaffold has not yet been fully explored. Here, we report the potential use of silicate-containing hydroxyapatite (SiHA) microparticles and microparticle aggregates in the predominant range from 2.23 to 12.40 μm in combination with polycaprolactone (PCL) as a hybrid scaffold with randomly oriented and well-aligned microfibers for regeneration of bone tissue. Chemical and mechanical properties of the developed 3D scaffolds were investigated with XRD, FTIR, EDX and tensile testing. Furthermore, the internal structure and surface morphology of the scaffolds were analyzed using synchrotron X-ray μCT and SEM. Upon culturing human mesenchymal stem cells (hMSC) on PCL-SiHA scaffolds, we found that both SiHA inclusion and microfiber orientation affected cell adhesion. The best hMSCs viability was revealed at 10 day for the PCL-SiHA scaffolds with well-aligned structure (~82%). It is expected that novel hybrid scaffolds of PCL will improve tissue ingrowth in vivo due to hydrophilic SiHA microparticles in combination with randomly oriented and well-aligned PCL microfibers, which mimic the structure of extracellular matrix of bone tissue.
Bone remodeling can be mimicked in vitro by co-culture models. Based on bone cells, such co-cultures help to study synergistic morphological changes and the impact of materials and applied substances. Hence, we examined the formation of osteoclasts on bovine bone materials to prove the bone resorption functionality of the osteoclasts in three different co-culture set-ups using human monocytes (hMCs) and (I) human mesenchymal stem cells (hMSCs), (II) osteogenic differentiated hMSCs (hOBs), and (III) hOBs in addition of soluble monocyte-colony stimulating factor (M CSF) and cytokine receptor activator of NFkB ligand (RANKL).We detected osteoclast-specific actin morphology, as well as the expression of cathepsin K and CD51/61 in single cells in set-up II and in numerous cells in set-up III. Resorption pits on bone material as characteristic proof of functional osteoclasts were not found in set-up I and II, but we detected such resorption pits in set–up III. We conclude in co culture models without M-CSF and RANKL that monocytes can differentiate into osteoclasts that show the characteristic actin structures and protein expression. However, to receive functional bone resorbing osteoclasts in vitro, the addition of M-CSF and RANKL is needed. Moreover, we suggest the use of bone or bone-like materials for future studies evaluating osteoclastogenesis.
Nowadays robust, energy-efficient multisensor microsystems often come with heavily restricted power budgets and the characteristic of remaining in certain states for a longer period of time. During this time frame there is no continuous clock signal required which gives the opportunity to suspend the clock until a new transition is requested. In this paper, we present a new topology for on-demand locally clocked finite state machines. The architecture combines a local adaptive clocking approach with synchronous and asynchronous components forming a quasi synchronous system. Using adaptive and local clocking comes with the advantages of reducing the power consumption while saving design effort when no global clock tree is needed. Combining synchronous and asynchronous components is beneficial compared to previous fully asynchronous approaches concerning the design restrictions. The developed topology is verified by the implementation and simulation of a temperature-ADC sensor system realized in a 180 nm process.
Die Mesago Messe Frankfurt als Veranstalter der Formnext 2018 haben von Prof. Dr.-Ing. Steffen Ritter von der Hochschule Reutlingen eine anschauliche Übersicht erstellen lassen, welche die Vielfalt der unterschiedlichen Verfahren zur additiven Fertigung verständlich erklärt. Die kleine, zweisprachige Broschüre mit dem Titel „AM Field Guide“ bietet auf 12 Seiten strukturierte Vergleichsdarstellungen von insgesamt 19 gängigen 3-D-Druck Technologien für Kunststoffe, Metalle sowie andere Werkstoffe und dazu noch einen Überblick über die Phasen und Prozessschritte in Projekten für Bauteile, die additiv hergestellt werden.
A transaction is a demarcated sequence of application operations, for which the following properties are guaranteed by the underlying transaction processing system (TPS): atomicity, consistency, isolation, and durability (ACID). Transactions are therefore a general abstraction, provided by TPS that simplifies application development by relieving transactional applications from the burden of concurrency and failure handling. Apart from the ACID properties, a TPS must guarantee high and robust performance (high transactional throughput and low response times), high reliability (no data loss, ability to recover last consistent state, fault tolerance), and high availability (infrequent outages, short recovery times).
The architectures and workhorse algorithms of a high-performance TPS are built around the properties of the underlying hardware. The introduction of nonvolatile memories (NVM) as novel storage technology opens an entire new problem space, with the need to revise aspects such as the virtual memory hierarchy, storage management and data placement, access paths, and indexing. NVM are also referred to as storage-class memory (SCM).
Active storage
(2018)
In brief, Active Storage refers to an architectural hardware and software paradigm, based on collocation storage and compute units. Ideally, it will allow to execute application-defined data ... within the physical data storage. Thus Active Storage seeks to minimize expensive data movement, improving performance, scalability, and resource efficiency. The effective use of Active Storage mandates new architectures, algorithms, interfaces, and development toolchains.
Blockchains yield to new workloads in database management systems and K/V-stores. Distributed Ledger Technology (DLT) is a technique for managing transactions in ’trustless’ distributed systems. Yet, clients of nodes in blockchain networks are backed by ’trustworthy’ K/V-Stores, like LevelDB or RocksDB in Ethereum, which are based on Log-Structured Merge Trees (LSM Trees). However, LSM-Trees do not fully match the properties of blockchains and enterprise workloads.
In this paper, we claim that Partitioned B-Trees (PBT) fit the properties of this DLT: uniformly distributed hash keys, immutability, consensus, invalid blocks, unspent and off-chain transactions, reorganization and data state / version ordering in a distributed log-structure. PBT can locate records of newly inserted key-value pairs, as well as data of unspent transactions, in separate partitions in main memory. Once several blocks acquire consensus, PBTs evict a whole partition, which becomes immutable, to secondary storage. This behavior minimizes write amplification and enables a beneficial sequential write pattern on modern hardware. Furthermore, DLT implicate some type of log-based versioning. PBTs can serve as MV-store for data storage of logical blocks and indexing in multi-version concurrency control (MVCC) transaction processing.
Modern persistent Key/Value stores are designed to meet the demand for high transactional throughput and high data ingestion rates. Still, they rely on backwards-compatible storage stack and abstractions to ease space management, foster seamless proliferation and system integration. Their dependence on the traditional I/O stack has negative impact on performance, causes unacceptably high write-amplification, and limits the storage longevity.
In the present paper we present NoFTL KV, an approach that results in a lean I/O stack, integrating physical storage management natively in the Key/Value store. NoFTL-KV eliminates backwards compatibility, allowing the Key/Value store to directly consume the characteristics of modern storage technologies. NoFTLKV is implemented under RocksDB. The performance evaluation under LinkBench shows that NoFTL-KV improves transactional throughput by 33%, while response times improve up to 2.3x. Furthermore, NoFTL KV reduces write-amplification 19x and improves storage longevity by imately the same factor.
Background: Internationally, teledermatology has proven to be a viable alternative to conventional physical referrals. Travel cost and referral times are reduced while patient safety is preserved. Especially patients from rural areas benefit from this healthcare innovation. Despite these established facts and positive experiences from EU neighboring countries like the Netherlands or the United Kingdom, Germany has not yet implemented store-and-forward teledermatology in routine care.
Methods: The TeleDerm study will implement and evaluate store-and-forward teledermatology in 50 general practitioner (GP) practices as an alternative to conventional referrals. TeleDerm aims to confirm that the possibility of store-and-forward teledermatology in GP practices is going to lead to a 15% (n = 260) reduction in referrals in the intervention arm. The study uses a cluster-randomized controlled trial design. Randomization is planned for the cluster “county”. The main observational unit is the GP practice. Poisson distribution of referrals is assumed. The evaluation of secondary outcomes like acceptance, enablers and barriers uses a mixed methods design with questionnaires and interviews.
Discussion: Due to the heterogeneity of GP practice organization, patient management software, information technology service providers, GP personal technical affinity and training, we expect several challenges in implementing teledermatology in German GP routine care. Therefore, we plan to recruit 30% more GPs than required by the power calculation. The implementation design and accompanying evaluation is expected to deliver vital insights into the specifics of implementing telemedicine in German routine care.
We present an approach for segmenting individual cells and lamellipodia in epithelial cell clusters using fully convolutional neural networks. The method will set the basis for measuring cell cluster dynamics and expansion to improve the investigation of collective cell migration phenomena. The fully learning-based front-end avoids classical feature engineering, yet the network architecture needs to be designed carefully. Our network predicts how likely each pixel belongs to one of the classes and, thus, is able to segment the image. Besides characterizing segmentation performance, we discuss how the network will be further employed.
This work is a report on practical experiences with the issue of interoperability in German practice management systems (PMSs) from an ongoing clinical trial on teledermatology, the TeleDerm project. A proprietary and established web-platform for store-and-forward telemedicine is integrated with the IT in the GPs’ offices for automatic exchange of basic patient data. Most of the 19 different PMSs included in the study sample lack support of modern health data exchange standards, therefore the relatively old but widely available German health data exchange interface “Gerätedatentransfer” (GDT) is used. Due to the lack of enforcement and regulation of the GDT standard, several obstacles to interoperability are encountered. As a partial, but reusable working solution to cope with these issues, we present a custom middleware which is used in conjunction with GDT. We describe the design, technical implementation and observed hindrances with the existing infrastructure. A discussion on health care interfacing standards and the current state of interoperability in German PMS software is given.
Properties data of phenolic resins synthetized for the impregnation of saturating Kraft paper
(2018)
The quality of decorative laminates boards depends on the impregnation process of Kraft papers with a phenolic resin,which constitute the raw materials for the manufacture of the cores of such boards.In the laminates industries,the properties of resins are adapted via their syntheses,usually by mixing phenol and formaldehyde in a batch,where additives,temperature and stirring parameters can be controlled. Therefore, many possibilities of preparation and phenolic resins exist, that leads to different combinations of physico chemical properties. In this article, the properties data of eight phenolic resins synthetized with different parameters of pH and reaction times at 60 °C and 90 °C are presented: the losses of pH after synthesis and the dynamic viscosities measured after synthesis and one the solid content is adjusted to 45%w/w in methanol. Data aquired by Differential Scanning Calorimetry (DSC) of the resins and Inverse Gas Chromatography (IGC) of cured solids are given as well.
The current paper studies the influence of geometrical parameters of the fused deposition modeling (FDM) - fused filament fabrication (FFF) 3D printing process on printed part strength for open source desktop 3D printers and the most popular material used for that purpose - i.e., polylactic acid (PLA). The study was conducted using a set of different nozzles (0.4, 0.6, and 0.8 mm) and a range of layer heights from the minimum to maximum physical limits of the machine. To assess print strength, a novel assessment method is proposed. A tubular sample is loaded in the weakest direction (across layers) in a three point bending fixture. Mesostructure evaluation through scanning electronic microscopy (SEM) scans of the samples was used to explain the obtained results. We detected a significant influence of geometric process parameters on sample mesostructure, and consequently, on sample strength.
Lots of movies are produced every year, too many to watch all of them and in particular, to get an overview about the evolution of typical movie genres and actors playing in them. Moreover, it is a challenging problem to detect correlations among the movies and the actors in those movies, in particular, if we are interested in time-varying data patterns like trends, countertrends, or anomalies and outliers. Those correlations are specifically interesting if they can be inspected on different levels of granularity, e.g., temporal, but also hierarchical in form of country- or continent-based correlations. In this paper we describe the IMDb Explorer, a webbased visualization tool that consists of two major views denoted by the movie cosmos and the career lines. Both views are linked and interactively manipulable while a list of user-defined metrics are explorable. We illustrate the usefulness of the visualization tool by applying it to the entire movie database provided by IMDb.
Workshops and tutorials
(2018)
The 19th International Conference on Product-Focused Software Process Improvement (PROFES 2018) hosted two workshops and three tutorials. The workshops and tutorials complemented and enhanced the main conference program, offering a wider knowledge perspective around the conference topics. The topics of the two workshops were Hybrid Development Approaches in Software Systems Development (HELENA) and Managing Quality in Agile & Rapid Software Development Processes (QUaSD). The topics of the tutorials were The human factor in agile transitions – using the personas concept in agile oaching, Process Management 4.0 – Best Practices, and Domain-specific languages for specification, development, and testing of autonomous systems.
Being able to monitor the heart activity of patients during their daily life in a reliable, comfortable and affordable way is one main goal of the personalized medicine. Current wearable solutions lack either on the wearing comfort, the quality and type of the data provided or the price of the device. This paper shows the development of a Textile Sensor Platform (TSP) in the form of an electrocardiogram (ECG)-measuring T-shirt that is able to transmit the ECG signal to a smartphone. The development process includes the selection of the materials, the design of the textile electrodes taking into consideration their electrical characteristics and ergonomy, the integration of the electrodes on the garment and their connection with the embedded electronic part. The TSP is able to transmit a real-time streaming of the ECG-signal to an Android smartphone through Bluetooth Low Energy (BLE). Initial results show a good electrical quality in the textile electrodes and promising results in the capture and transmission of the ECG signal. This is still a working- progress and it is the result of an interdisciplinary master project between the School of Informatics and the School of Textiles & Design of the Reutlingen University.
A series of novel biomedical TPCUs with different percentages of hard segment and a silicone component in the soft segment were synthesized in a multi stage one-pot method. The kinetic profiles of the urethane formation in TPCU-based copolymer systems were monitored by rheological, in line FTIR spectroscopic (React IR) and real-time calorimetric (RC1) methods. This process-analytically monitored multi step synthesis was successfully used to optimize the production of medical-grade TPCU elastomers on preparative scale (in lots of several kg) with controlled molecular structure and mechanical properties. Various surface and bulk analytical methods as well as systematic studies of the mechanic response of the elastomer end-products towards compression and tensile loading were used to estimate the bio-stability of the prepared TPCUs in vitro after 3 months. The tests suggested that high bio-stability of all polyurethane formulations using accelerating in vitro test can be attributed to the synthetic design as well as to the specific techniques used for specimen preparation, namely: (1) the annealing for reducing residual polymer surface stress and preventing IES, (2) stabilization of the morphology by long time storage of the specimens after processing before being immersed in the test liquids, (3) purification by extraction to remove the shot chain oligomers which are the most susceptible to degradation. All mechanical tests were performed on cylindrical and circular disc specimens for modelling the thickness of the meniscus implants under application-relevant stress conditions.
So far, only few authors addressed the serum-free, defined differentiation of adipocytes. And there are hardly any trials available on the defined maintenance of adipocytes. In this study, the development of a defined culture medium for the adipogenic differentiation of primary human adipose-derived stem cells (ASCs) was aimed. Based on the addition of specific factors for the replacement of serum, ASCs were differentiated to viable and characteristic adipocytes for 14 days, which was proven through the accumulation of lipids, the expression of perilipin A and by the release of leptin and glycerol. Furthermore, a defined maintenance medium was developed, which supported the maturation and stability of cells for a long-term period of additional 42 days until day 56.
This paper addresses what we call the investment question: under what plausible circumstances, if any, can variable renewable energy (VRE, and solar photovoltaic (PV) in particular) be a good investment? Although VRE has been growing rapidly world-wide, it is generally subsidized. Under what cost and market conditions can solar PV flourish without subsidy? We employ solar insolation and market price data from the U.S. and from Germany to gain insight into the investment question. We find that unsubsidized solar PV is or may soon be a justifiable investment, but that market arrangements may play a crucial role in determining success. We end by sketching a proposal that amounts to a reformed capacity market that would afford participation of solar PV.
Zur Entwicklung einer Sofortpreiskalkulation für CNC-Drehteile werden Machine-Learning-Ansätze sowie ein deterministischer Algorithmus untersucht. Der deterministische Algorithmus funktioniert ausschließlich für Drehteile mit geringer Komplexität. Die Machine Learning Modelle hingegen sind zukunftsfähiger, da die ersten Ergebnisse bereits sehr geringe Abweichungswerte zu den festgelegten Referenzpreisen erreichen können. Mit steigendem Datenaufkommen können beide Machine-Learning-Modelle mit geringem Aufwand weiter verbessert werden.
Die Segmentierung und das Tracking von minimal-invasiven robotergeführten Instrumenten ist ein wesentlicher Bestandteil für verschiedene computer assistierte Eingriffe. Allerdings treten in der minimal-invasiven Chirurgie, die das Anwendungsfeld für den hier beschriebenen Ansatz darstellt, häufig Schwierigkeiten durch Reflexionen, Schatten oder visuelle Verdeckungen durch Rauch und Organe auf und erschweren die Segmentierung und das Tracking der Instrumente.
Dieser Beitrag stellt einen Deep Learning Ansatz für ein markerloses Tracking von minimal-invasiven Instrumenten vor und wird sowohl auf simulierten als auch realen Daten getestet. Es wird ein simulierter als auch realer Datensatz mit Ground Truth Kennzeichnung für die binäre Segmentierung von Instrument und Hintergrund erstellt. Für den simulierten Datensatz werden Bilder aus einem simulierten Instrument und realem Hintergrund zusammengesetzt. Im Falle des realen Datensatzes spricht man von der Zusammensetzung der Bilder aus einem realen Instrument und Hintergrund. Insgesamt wird auf den simulierten Daten eine Pixelgenauigkeit von 94.70 Prozent und auf den realen Daten eine Pixelgenauigkeit von 87.30 Prozent erreicht.
Die minimal-invasive Chirurgie (MIC) entwickelt sich durch den Einsatz von medizinischen Robotern wie dem da Vinci System von Intuitive Surgical stetig weiter. Hierdurch kann eine bessere oder gleichwertige Operation bei deutlich geringerer körperlicher Belastung des Operateurs erreicht werden. Dabei entstehen jedoch neue Problemstellungen wie beispielsweise Kollision zwischen Roboterarmen und die benötigte Zeit zum Einrichten einer geeigneten Roboterkonfiguration. Daher ist eine effiziente Vorbereitung und Planung der Interventionen erforderlich. Diese Arbeit präsentiert einen Ansatz für eine verbesserte Planung mit Augmented Reality (AR) und einer Robotik Simulationssoftware (RS). Die Robotik Simulation dient zur Berechnung einer Roboterkonfiguration unter Vorgabe der Port-Positionen. Augmented Reality wird verwendet, um die berechneten Pose in der realen Umgebung zu visualisieren und somit leichter in den Operationssaal zu übertragen.
The focus of the developed maturity model was set on processes. The concept of the widespread CMM and its practices has been transferred to the perioperative domain and the concept of the new maturity model. Additional optimization goals and technological as well as networking-specific aspects enable a process- and object-focused view of the maturity model in order to ensure broad coverage of different subareas. The evaluation showed that the model is applicable to the perioperative field. Adjustments and extensions of the maturity model are future steps to improve the rating and classification of the new maturity model.
A shift in attitudes to purchasing departments can be perceived. No longer is the chief goal solely to reduce costs; the procurement function is assuming strategic relevance in the business model, leveraging the supplier as a foundation for innovation. The knowledge accumulated by suppliers is accessed over the journey of long-term partnerships to streamline business practice. Businesses are finding themselves in increasingly competitive environments, and thus need to address inefficiencies in supplier management. “Procurement 4.0” is a concept used in discussing digitalisation in business processes, referring to the process of supplier relationship management and optimisation. This model and its application to supplier relationship management will be the focus of this article. Realising the efficiencies to be obtained in buyer-supplier relationships through “Procurement 4.0” will be explored, primarily through an emphasis on digitalisation of the relationship between the procurement department and supplier.
Surface topographies are often discussed as an important parameter influencing basic cell behavior. Whereas most in vitro studies deal with microstructures with sharp edges, smooth, curved microscale topographies might be more relevant concerning in-vivo situations. Addressing the lack of highly defined surfaces with varying curvature, we present a topography chip system with 3D curved features of varying spacing, curvature radii as well as varying overall dimensions of curved surfaces. The CurvChip is produced by low-cost photolithography with thermal reflow, subsequent (repetitive) PDMS molding and hot embossing. The platform facilitates the systematic in-vitro investigation of the impact of substrate curvature on cell types like epithelial, endothelial, smooth muscle cells, or stem cells. Such investigations will not only help to further understand the mechanism of curvature sensation but may also contribute to optimize cell-material interactions in the field of regenerative medicine.
In Neurofibromatosis 1 (NF1) germ line loss of function mutations result in reduction of cellular neurofibromin content (NF1+/−, NF1 haploinsufficiency). The Ras-GAP neurofibromin is a very large cytoplasmic protein (2818 AA, 319 kDa) involved in the RAS-MAPK pathway. Aside from regulation of proliferation, it is involved in mechanosensoric of cells. We investigated neurofibromin replacement in cultured human fibroblasts showing reduced amount of neurofibromin. Full length neurofibromin was produced recombinantly in insect cells and purified. Protein transduction into cultured fibroblasts was performed employing cell penetrating peptides along with photochemical internalization. This combination of transduction strategies ensures the intracellular uptake and the translocation to the cytoplasm of neurofibromin. The transduced neurofibromin is functional, indicated by functional rescue of reduced mechanosensoric blindness and reduced RasGAP activity in cultured fibroblasts of NF1 patients or normal fibroblasts treated by NF1 siRNA. Our study shows that recombinant neurofibromin is able to revert cellular effects of NF1 haploinsuffiency in vitro, indicating a use of protein transduction into cells as a potential treatment strategy for the monogenic disease NF1.
Die Additive Fertigung bietet großes Potenzial zur Erschließung neuer, flexibler und innovativer Fertigungsprozesse mit kurzen Durchlaufzeiten. Erhöhte Komplexität und die Integration von Funktionen in Bauteile wird gefördert. Zur Steigerung der Konkurrenzfähigkeit und weiteren Ausweitung des Einsatzgebietes sind automatisierte Fertigungsschritte nach dem Bauprozess erforderlich. Werkzeugmaschinen spielen auch in der Prozesskette der Additiven Fertigung eine zentrale Rolle bei der Erzeugung von genauen Funktionsflächen. Dabei ist evtl. eine andere Auslegung aufgrund reduzierter Zerspanvolumen und geringeren Flächen möglich.
This article contains data on the synthesis and mechanical characterization of polysiloxane-based urea-elastomers (PSUs) and is related to the research article entitled “Influence of PDMS molecular weight on transparency and mechanical properties of soft polysiloxane-urea-elastomers for intraocular lens application” (Riehle et al., 2018) [1]. These elastomers were prepared by a two-step polyaddition using the aliphatic diisocyanate 4,4′-Methylenbis(cyclohexylisocyanate) (H12MDI), a siloxane-based chain extender 1,3-Bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane (APTMDS) and amino-terminated polydimethylsiloxanes (PDMS) or polydimethyl-methyl-phenyl-siloxane-copolymers (PDMS-Me,Ph), respectively. (More details about the synthesis procedure and the reaction scheme can be found in the related research article (Riehle et al., 2018) [1]).
Amino-terminated polydimethylsiloxanes with varying molecular weights and PDMS-Me,Ph-copolymers were prepared prior by a base-catalyzed ring-chain equilibration of a cyclic siloxane and the endblocker APTMDS. This DiB article contains a procedure for the synthesis of the base catalyst tetramethylammonium-3-aminopropyl-dimethylsilanolate and a generic synthesis procedure for the preparation of a PDMS having a targeted number average molecular weight of 3000 g mol−1. Molecular weights and the amount of methyl-phenyl-siloxane within the polysiloxane-copolymers were determined by 1H NMR and 29Si NMR spectroscopy. The corresponding NMR spectra and data are described in this article.
Additionally, this DiB article contains processed data on in line and off line FTIR-ATR spectroscopy, which was used to follow the reaction progress of the polyaddition by showing the conversion of the diisocyanate. All relevant IR band assignments of a polydimethylsiloxane-urea spectrum are described in this article.
Finally, data on the tensile properties and the mechanical hysteresis-behaviour at 100% elongation of PDMS-based polyurea-elastomers are shown in dependence to the PDMS molecular weight.
Small Island Developing States (SIDS) face tension between economic growth and environmental impact. Tourism fuels growth, but the resulting solid waste and other pollutants threaten the SIDS’ natural beauty, quality of life for residents, attractiveness to tourists, and economic success. We assess the tension between tourism-driven economic growth and environmental degradation from a limits-to-growth perspective, developing a generic system dynamics model of the problem using 38 years of data from the Maldives to estimate parameters and Monte-Carlo methods to assess the sensitivity of results to uncertainty. We contrast development paths for the next three decades under three sets of policies focusing on promoting growth, managing tourism demand–supply balance, and improving waste management. Findings are counterintuitive; policies focused on better waste management alone are self defeating, because they increase tourism, growth and waste generation, undermining attractiveness and growth later. Policies that limit tourism demand improve economic and environmental health.
Future intralogistics systems need to adapt flexibly to changing material flow requirements in line with future versatile factory environments, producing personalized products under the performance and cost conditions of today's mass production. Small batch sized down to a batch size of "1" lead to a high complexity in the design and economical manufacturing of these customized products. Intralogistics systems are integrated into higher-level areas (segment level) as well as into upsteam and downstream performance units (system-wide areas). This includes the logistic activities relevant for the system (organized according to storage, picking, transport) such as transportation or storage tasks of tools, semi-finished products, components, assemblies and containers, and waste. Today's centralized material flow control systems, which work based on predefined processes, are not capable and more specifically not suitable to deal with the arising complexity of changeable intralogistics systems. Autononomous, decentralized material flow control systems distribute the required decision-making and control processes on intelligent logistic entities. A major step for the development of an autonomous control method for hybrid intralogistics systems (manual, semi-automated and automated) is the development of a generic archetype for intralogistics systems regarding the system boundaries, elements and relations resulting in a descriptive model taking into account amongst others the time of demand, availability of resources, economic efficiency and technical performance parameters. The ESB Logistics Learning Factory at ESB Business School (Reutlingen University) serves for this as a close-to-reality development and validation environment.
In recent years, the numer of hybrid work systems using human robot collaboration (HRC) increased in industrial production environments - enhancing productivity while reducing work-related burden. Despite growing availability of HRC-suitable manipulation and safety technology, tools and techniques facilitating the design, planning and implementation process are still lacking. System engineers who strive to implement technically feasible, ergonomically meaningful and economically beneficial HRC application need to make design and technology decisions in various subject areas, whereas the design alternatives per morphological analysis is applied to establish a description model that can serve as both a supporting design guideline for future HRC application of value-adding, industrial quality as well as a tool to characterize and compare existing applications. It focuses on HRC within assembly processes, and illustrates the complexity of HRC applications in a comprehensible manner through its multi-dimensional structure. The morphology has been validated through its application on various existing industrial HRC applications, research demonstrators and interviews of experts from academia.
Polyelectrolyte multi-layer (PEM) coatings are prepared by alternative deposition of single polyelectrolyte monolayers on charged surfaces using the Layer-by-Layer (LbL) dip coating procedure. These are nanometre scaled coatings which allow fulfilling of different technical or biological requirements. The build-up process is based on selfassembly and self organization of polycations and polyanions on different substrates including complex geometrical structures and even closed volumes, forming homogeneous layer without defects. Depending on the proper selection of the applied polyelectrolytes, coatings with different stabilities can be prepared. Some of the coatings are stable and cannot be removed from the surface. Others are degradable and can be used as systems for controlled local drug delivery. Here we summarise the results of our experience in preparation of PEM coatings with different functionalities. PEM coatings can be used as controllable delivery system for siRNA polyplexes. They can be used to control the adhesion of different cell types on the surfaces and support e.g. the endothelialisation process on cardio-vascular medical devices as e.g. stents or reduce the immunological response of the tissue after implantation. We summarise results from physical characterisation of the coatings (e.g. film thickness, roughness, electrical charge and hydrophilicity) combined with in-vitro biological studies on adhesion of HUVEC cells.
Polyelectrolyte multilayer (PEM) are thin polymeric films produced by alternating adsorption of positively and negatively charged polyelectrolytes (PE) on a substrate. These films are considered drug delivery agents as well as coating material for implants, due to their antibiofouling and biologically benign properties. For these reasons the film mechanical properties as well as response to mechanical stress are important measurement parameters. Especially intriguing is the correlation of the mechanical properties of PEM on macroscopic level with the structure of PEM on molecular level, which is addressed here for the first time. This study investigates PEM from PDADMA/PSS produced by spraying technique with neutron and X-ray reflectometry. Reflectometry technique provides precise information on thickness and density (i.e., electron density or scattering length density, respectively), and, this way, allows to conclude on changes in film composition. Thus, neutron and X-ray reflectometry technique is suitable to investigate the overall and the internal transformations, which PEM films might undergo upon exposure to mechanical load. During uniaxial elongation two regimes of PEM deformation can be observed: An elastic regime at small elongations (below ca. 0.2%), which is characterized by a reversible change of film thickness, and a plastic regime with a permanent change above this limit. Both regimes have in common, that the mechanical load induces an increase of the film thickness, which is accompanied by an uptake of water from the surrounding atmosphere. The strain causes a molecular rearrangement within the PEM-structure of stratified layers, which, even in elastic regime, is permanent, although the thickness change remains reversible.
This paper presents a digitally controlled boost converter IC for high output voltage and fast transient applications. Thus, it is well applicable in automotive and industrial environments. The 3V-to-6V input voltage, 6.3V output voltage, 1A boost converter IC is fabricated in a 180nm BCD technology. Digital control enables cost savings, advanced control concepts, and it is less parameter sensitive compared to common analog control. A 90 ns latency, 6-bit delay line ADC operates with a window concept, meeting high resolution requirements, e.g. in car battery applications. An output voltage live tracking is included for extending the ADC conversion window. A charge pump DAC provides high resolution, monotonicity, and short 128 ns conversion time. Further, a standard digital PI controller is enhanced by a simple but effective ΔV/Δt-intervention control. It results in 2.8x reduced output voltage deviations in case of load steps, scaling down the output capacitor value by the same factor.
Boost converters suffer from a bandwidth limitation caused by the right-half plane zero (RHPZ), which occurs in the control-to-output transfer function. In contrast, there are many applications that require superior dynamic behavior. Further, size and cost of boost converter systems can be minimized by reduced voltage deviations and fast transient responses in case of large signal load transients. The key idea of the proposed ΔV/Δt-intervention control concept is to adapt the controller output to its new steady state value immediately after a load transient by prediction from known parameters. The concept is implemented in a digital control circuit, consisting of an ASIC in a 110 nm-technology and a Xilinx Spartan-6 field programmable gate array (FPGA). In a boost converter with 3.5V input voltage, 6.3V output voltage, 1.2A load, and 500 kHz switching frequency, the output voltage deviations are 2.8x smaller, scaling down the output capacitor value by the same factor. The recovery times are 2.4x shorter in case of large signal load transients with the proposed concept. The control is widely applicable, as it supports constant switching frequencies and allows for duty cycle and inductor current limitations. It also shows various advantages compared to conventional control and to selected adaptive control concepts.
This paper presents a wide-Vin step-down parallel-resonant converter (PRC), comprising an integrated 5-bit capacitor array and a 300-nH resonant coil, placed in parallel to a conventional buck converter. Soft-switching resonant converters are beneficial for high-Vin multi-MHz converters to reduce dominant switching losses, enabling higher switching frequencies. The output filter inductor is optimized based on an empirical study of available inductors. The study shows that faster switching significantly reduces not only the inductor value but also volume, price, and even the inductor losses. In addition, unlike conventional resonant concepts, soft-switching control as part of the proposed PRC eliminates input voltage-dependent losses over a wide operating range, resulting in 76.3% peak efficiency. At Vin = 48 V, a loss reduction of 35% is achieved compared with the conventional buck converter. Adjusting an integrated capacitor array, and selecting the number of oscillation periods, keeps the switching frequency within a narrow range. This ensures high efficiency across a wide range of Vin = 12–48 V, 100–500-mA load, and 5-V output at up to 25-MHz switching frequency. Thanks to the low output current ripple, the output capacitor can be as small
as 50 nF.
This paper presents a dc–dc converter for integration in the power management unit of an ultra-low power microcontroller. The converter is designed to significantly reduce the wake-up energy and startup delay of the supplied core. The use of a minimized output capacitor is the key factor to save the wake-up energy. The converter is buffered with only 56 nF and guarantees a stable output of 1.2 V with a voltage ripple smaller than 30 mV. The controller of the proposed dc–dc converter is based on a predictive peak current control that allows the system to control the energy transfer at extremely low power consumption. The proposed circuit is implemented in 130 nm CMOS technology with an area of only 0.14 mm². It achieves a high conversion efficiency of 92.1% and a small quiescent current of 440 nA. It operates from 1.8 to 3.3 V with a maximum load of 2.65 mA.
Der spartenübergreifende BDI-Arbeitskreis Internet der Energie hat voraussichtliche Veränderungen durch Künstliche Intelligenz (KI) auf die Bereiche Energie und Klima analysiert und den möglichen Beitrag von KI zur Lösung anstehender Herausforderungen in diesen Bereichen erörtert. KI kann einen wesentlichen Beitrag zum Gelingen der Energiewende in Deutschland leisten. Der Energiesektor ist ein zentraler Bestandteil der deutschen Wirtschaft und daher auch in diesem Kontext äußerst relevant.
Im Vergleich zum digitalen Layoutentwurf weist der analoge Layoutentwurf einen wesentlich geringeren Automatisierungsgrad auf. Dies gilt insbesondere für den Layoutentwurf von Hochfrequenzschaltungen, wo Einflüsse der lokalen Layoutumgebung besonders zu berücksichtigen sind. Bei dieser sog. Kontextabhängigkeit geraten sowohl Optimierungsalgorithmen als auch herkömmliche Generatoransätze schnell an Grenzen. In dieser Arbeit wird eine funktionale Erweiterung des bekannten Generatorprinzips eingesetzt, die es erlaubt, Informationen aus der Layoutumgebung der Instanz in die Layoutgenerierung einzubeziehen. Mit dieser sog. kontextbasierten PCell gelingt die Automatisierung konkreter, bisher nur manuell lösbarer Probleme des Layoutentwurfs von Hochfrequenzschaltungen. Die Arbeit zeigt das Potential kontextbasierter PCells für die weitere Steigerung des Automatisierungsgrades im analogen Layoutentwurf.
Digitization is the use of digital technologies for creating innovative digital business models and transforming existing business models, processes and systems. Digitization creates profound changes in the economy and society. Information is often captured and processed without human intervention using digital means. Digitization impacts nearly all products and services as well as the customer and the value-creation perspective.
A procedural approach to automate the manual design process in analog integrated circuit design
(2018)
This paper presents a novel approach to automating the design of analog integrated circuits: (1) the Expert Design Plan (EDP), a procedural generator, and (2) the EDP Language, a high-level description language for writing an EDP. An EDP is a parameterizable, executable script, which reproduces a designer’s course of action when designing a circuit. Thus, an EDP formalizes the design expert’s knowledge-based strategy and makes it reusable. Since it is essential that an EDP represents a circuit designers’ way of thinking and working as close as possible, the designers themselves should be enabled to create the EDP. Therefore, our approach provides a input method through a domain-specific language called EDP Language (EDPL). Using this language is intuitive and requires no special training. In an exemplary implementation of our approach, a common-source amplifier is automatically sized using a set of only 10 instructions. Even in the first usage our EDP approach has appeared to be more efficient than the manual sizing process.
Creating new business models, products or services is challenging in fast changing unpredictable environments. Often, product teams need to make many assumptions (e.g., assumptions about future demands) that might not be true. These assumptions impose risks to the success and these risks need to be mitigated early. One of the principles of the Lean Startup approach is to identify and prioritize the riskiest assumptions in order to validate them as early as possible. This helps to avoid wasting effort and time. In the literature there are several different methods for identifying and prioritizing the riskiest assumptions reported. However, only little research exists about the practical application of these methods in practice and how to teach them. In this paper, we present and empirically analyze a workshop format that we have developed for teaching the prioritization of Lean Startup assumptions. We aim at raising the awareness for assumption thinking among the participants and teach them through group work how to prioritize assumptions. The results of the analysis of a multitude of conducted workshops show that the applied method did lead to reasonable results and accompanying learning effects. In addition, the participants got aware of assumption thinking and liked learning in a practical way.
Objective: This paper aims at getting an understanding of current problems and challenges with roadmapping processes in companies that are facing volatile markets with innovative products. It also aims at gathering ideas and attempts on how to react to those challenges.
Method: As an initial step towards the objectice a semi-structured expert interview study with a case company in the Smart Home domain was conducted. Four employees from the case company with different roles around product roadmaps have been interviewed and a content analysis of the data has been performed.
Results: The study shows a significant consensus among the interviewees about several major challenges and the necessity to change the traditional roadmapping process and format. The interviewees stated that based on their experience traditional feature-based product roadmaps are increasingly losing their benefits (such as good planning certainty) in volatile environments. Furthermore, the ability to understand customer needs and behaviors has become highly important for creating and adjusting product roadmaps. The interviewees see the need for both, sufficiently stable goals on the roadmap and flexibility with respect to products or features to be developed. To reach this target the interviewees proposed to create roadmaps based on outcome goals instead of product features. In addition, it was proposed to decrease the level of detail of the roadmaps and to emphasize the long-term view. Decisions about which feature to develop should be open as long as possible. Expected benefits of such a new way of product roadmapping are higher user centricity, a stable overall direction, more flexibility with respect to development decisions, and less breaking of commitments.
Sleep study can be used for detection of sleep quality and in general bed behaviors. These results can helpful for regulating sleep and recognizing different sleeping disorders of human. In comparison to the leading standard measuring system, which is Polysomnography (PSG), the system proposed in this work is a non-invasive sleep monitoring device. For continuous analysis or home use, the PSG or wearable Actigraphy devices tends to be uncomfortable. Besides, these methods not only decrease practicality due to the process of having to put them on, but they are also very expensive. The system proposed in this paper classifies respiration and body movement with only one type of sensor and also in a noninvasive way. The sensor used is a pressure sensor. This sensor is low cost and can be used for commercial proposes. The system was tested by carrying out an experiment that recorded the sleep process of a subject. These recordings showed excellent results in the classification of breathing rate and body movements.
Digital transformation has changed corporate reality and, with that, firms’ IT environments and IT governance (ITG). As such, the perspective of ITG has shifted from the design of a relatively stable, closed and controllable System of a self-sufficient Enterprise to a relatively fluid, open, agile and transformational system of networked co-adaptive entities. Related to this paradigm shift in ITG, this paper aims to clarify how the concept of an effective ITG framework has changed in terms of the demand for agility in organizations. Thus, this study conducted 33 qualitative interviews with executives and senior managers from the banking industry in Germany, Switzerland and Austria. Analysis of the interviews focused on the formation of categories and the assignment of individual text parts (codings)
to these categories to allow for a quantitative evaluation of the codings per category. Regarding traditional and agile ITG dimensions, 22 traditional and 25 agile dimensions in terms of structures, processes and relational mechanisms were identified. Moreover, agile strategies within the agile ITG construct and ten ITG patterns were identified from the interview data. The data show relevant perspectives on the implementation of traditional and new ITG dimensions and highlight ambidextrous aspects in ITG in the German-speaking banking industry.
Digital transformation has changed corporate reality and, with that, firms’ IT environments and IT governance (ITG). As such, the perspective of ITG has shifted from the design of a relatively stable, closed and controllable system of a self-sufficient enterprise to a relatively fluid, open, agile and transformational system of networked co adaptive entities. Related to this paradigm shift in ITG, this paper aims to clarify how the concept of an effective ITG framework has changed in terms of the demand for agility in organizations. Thus, this study conducted 33 qualitative interviews with executives and senior managers from the banking industry in Germany, Switzerland and Austria. Analysis of the interviews focused on the formation of categories and the assignment of individual text parts (codings) to these categories to allow for a quantitative evaluation of the codings per category. Regarding traditional and agile ITG dimensions, 22 traditional and 25 agile dimensions were identified. Moreover, agile strategies within the agile ITG construct and ten ITG patterns were identified from the interview data. The data show relevant perspectives on the implementation of traditional and new ITG dimensions and highlight ambidextrous aspects in ITG frameworks.
Sole value – the sneaker resale market :
an explorative analysis of the sneaker resale market
(2018)
The purpose of this explorative research paper is to examine the sneaker resale market and its typical processes in order to give a comprehensive overview over the secondary market for limited edition sneakers. Hypotheses are presented that will be analysed with the empirical research methods of expert interviews and sales data analysis. Amongst other findings, this paper shows that there is a complementary relationship between sneaker brands and the resale market; that product limitation is essential for value increases; that collaborations are necessary for sneaker brands to be relevant on the resale market and that the market is very fragmented. All combined circumstances described in this paper explain the sneaker resale market and its processes. Additionally, some outlooks on the future will be given with the help of expert interviewees and current developments on the market will be discussed.
The level shifter and the floating gate supply for high-side transistors are a major challenge in high-voltage DCDC converters. This paper presents a high speed and power-efficient level shifter for voltages of up to 50V, suitable for both PMOS and NMOS power FETs. A switching node falling edge detection allows both, a sensitive and safe signal detection. This enables a robust operation during steep dv / dt transitions and a power consumption as low as 4.1 pJ per switching cycle, which is a reduction of more than 40% compared to prior art. An active clamping circuit prevents common mode displacement currents into the high-side supply. The level shifter is implemented in a 180nm BiCMOS technology. Measurements confirm a 50V 120MHz high-speed operation of the level shifter with a rising / falling propagation delay of 1.45 ns / 1.3 ns, respectively. The dv / dt robustness has been confirmed by measurements for transitions up to 6V/ ns.
A wide-bandwidth galvanically isolated current sensing circuit with an integrated Rogowski coil in 180nm CMOS is presented. Exploiting the high-frequency properties of an optimized on-chip Rogowski coil, currents can be measured up to a bandwidth of 75 MHz. The analog sensor front-end comprises a two-stage integrator, which allows a chopper frequency below signal bandwidth, resulting in 2.2 mVrms output noise. An additional integrated Hall sensor extends the measurement range towards DC.
Due to their superior fast-switching performance, GaN transistors show enormous potential to enable compact power electronics in applications like renewable energy, electrical cars and home appliances by shrinking down the size of passives. However, fast switching poses challenges for the gate driver. Since GaN transistors have a low threshold voltage Vt of ~1V, an unintended driver turn-on can occur in case of a unipolar gate control as shown for a typical half-bridge in Fig. 24.2.1 (top left). This is due to coupling via the gate-drain capacitance (Miller coupling), when the low-side driver turns on, causing a peak current into the gate. This is usually tackled by applying a negative gate voltage to enhance the safety margin towards Vt, resulting in a bipolar gate-driving scheme. In many power-electronics applications GaN transistors operate in reverse conduction, carrying the inductor current during the dead time t, when the high-side and low-side switch are off (as illustrated at a high-side switch in Fig. 24.2.1, bottom left). As there is no real body diode as in silicon devices, the GaN transistor turns on in reverse operation with a voltage drop VF across the drain-source terminals (quasi-body diode behavior). As a negative gate voltage adds to VF, 63% higher reverse-conduction losses were measured for a typical GaN switch in bipolar gate-drive operation. This drawback is addressed by a three-level gate voltage (positive, 0V, negative), which at the same time provides robustness against unintended turn-on similar to the bipolar gate driver, proven in [1] for a discrete driver.
This paper presents a fully integrated gate driver in a 180-nm bipolar CMOS DMOS (BCD) technology with 1.5-A max. gate current, suitable for normally OFF gallium nitride (GaN) power switches, including gate-injection transistors (GIT). Full-bridge driver architecture provides a bipolar and three-level gate drive voltage for a robust and efficient GaN switching. The concept of high voltage energy storing (HVES), which comprises an on-chip resonant LC tank, enables a very area-efficient buffer capacitor integration and superior gatedriving speed. It reduces the component count and the influence of parasitic gate-loop inductance. Theory and calculations confirm the benefits of HVES compared to other capacitor implementation methods. The proposed gate driver delivers a gate charge of up to 11.6 nC, sufficient to drive most types of currently available GaN power transistors. Consequently, HVES enables to utilize the fast switching capabilities of GaN for advanced and compact power electronics.
In current times, a lot of new business opportunities appeared using the potential of the Internet and related digital technologies, like Internet of Things, services computing, cloud computing, big data with analytics, mobile systems, collaboration networks, and cyber physical systems. Enterprises are presently transforming their strategy, culture, processes, and their information systems to become more digital. The digital transformation deeply disrupts existing enterprises and economies. Digitization fosters the development of IT environments with many rather small and distributed structures, like Internet of Things. This has a strong impact for architecting digital services and products. The change from a closed-world modeling perspective to more flexible open-world and living software and system architectures defines the moving context for adaptable and evolutionary software approaches, which are essential to enable the digital transformation. In this paper, we are putting a spotlight to service oriented software evolution to support the digital transformation with micro granular digital architectures for digital services and products.
While there are several theoretical comparisons of Object Orientation (OO) and Service Orientation (SO), little empirical research on the maintainability of the two paradigms exists. To provide support for a generalizable comparison, we conducted a study with four related parts. Two functionally equivalent systems (one OO and one SO version) were analyzed with coupling and cohesion metrics as well as via a controlled experiment, where participants had to extend the systems. We also conducted a survey with 32 software professionals and interviewed 8 industry experts on the topic. Results indicate that the SO version of our system possesses a higher degree of cohesion, a lower degree of coupling, and could be extended faster. Survey and interview results suggest that industry sees systems built with SO as more loosely coupled, modifiable, and reusable. OO systems, however, were described as less complex and easier to test.
Maintainability assurance techniques are used to control this quality attribute and limit the accumulation of potentially unknown technical debt. Since the industry state of practice and especially the handling of service- and microservice-based systems in this regard are not well covered in scientific literature, we created a survey to gather evidence for a) used processes, tools, and metrics in the industry, b) maintainability-related treatment of systems based on service orientation, and c) influences on developer satisfaction w.r.t. maintainability. 60 software professionals responded to our online questionnaire. The results indicate that using explicit and systematic techniques has benefits for maintainability. The more sophisticated the applied methods the more satisfied participants were with the maintainability of their software while no link to a hindrance in productivity could be established. Other important findings were the absence of architecture-level evolvability control mechanisms as well as a significant neglect of service-oriented particularities for quality assurance. The results suggest that industry has to improve its quality control in these regards to avoid problems with long living service-based software systems.
To bring a pattern-based perspective to the SOA vs. microservices discussion, we qualitatively analyzed a total of 118 SOA patterns from 2 popular catalogs for their (partial) applicability to microservices. Patterns had to hold up to 5 derived microservices principles to be applicable. 74 patterns (63%) were categorized as fully applicable, 30 (25%) as partially applicable, and 14 (12%) as not applicable. Most frequently violated microservices characteristics werde Decentralization and Single System. The findings suggest that microservices and SOA share a large set of architectural principles and solutions in the general space of service-based systems while only having a small set of differences in specific areas.
Digital Enterprise Architecture allows multiple viewpoints on a company’s IT landscape. To gain valuable information out of huge amounts of operational data, it is indispensable to have both an understanding of the operations architecture and an engine capable of managing Big Data. The mechanism of understanding huge amounts of data is based on three main steps: collect, process and use. The main idea is focused on extracting valuable information out of Big Data to make better design decisions. The Elastic Stack is an open-source solution to comfortably and quickly handle Big Data scenarios.
Enterprise Governance, Risk and Compliance (GRC) systems are key to managing risks threatening modern enterprises from many different angles. Key constituent to GRC systems is the definition of controls that are implemented on the different layers of an Enterprise Architecture (EA). As part of the compliance aspect of GRC, the effectiveness of these controls is assessed and reported to relevant management bodies within the enterprise. In this paper we present a metamodel which links controls to the affected elements of an EA and supplies a way of expressing associated assessment techniques and results. We complement the metamodel with an expository instantiation in a cockpit for control compliance applied in an international enterprise in the insurance industry.
The unprecedented acceleration in the dynamics of economic development and its dependence on global interactions makes predicting the future especially difficult. Nevertheless, an examination of long-term trends provides an opportunity to begin a discussion about what reality could await us tomorrow and how we want to deal with it. With this food-for-thought paper, the member institutes of the Fraunhofer Group for Innovation Research wish to present a selection of the trends that are destined to have a significant impact on innovation systems in the period leading up to 2030. Based on these trends, the paper derives theses for innovation in the year 2030 and describes the resulting tasks for business, politics, science and society.
As production workspaces become more mobile and dynamic it becomes increasingly important to reliably monitor the overall state of the environment. Therein manipulators or other robotic systems likely have to be able to act autonomously together with humans and other systems within a joint workspace. Such interactions require that all components in non-stationary environments are able to perceive the state relative to each other. As vision-sensors provide a rich source of information to accomplish this, we present RoPose, a convolutional neural network (CNN) based approach, to estimate the two dimensional joint configuration of a simulated industrial manipulator from a camera image. This pose information can further be used by a novel targetless calibration setup to estimate the pose of the camera relative to the manipulator’s space. We present a pipeline to automatically generate synthetic training data and conclude with a discussion of the potential usage of the same pipeline to acquire real image datasets of physically existent robots.
The basic idea behind a wearable robotic grasp assistancesystem is to support people that suffer from severe motor impairments in daily activities. Such a system needs to act mostly autonomously and according to the user’s intent. Vision-based hand pose estimation could be an integral part of a larger control and assistance framework. In this paper we evaluate the performance of egocentric monocular hand pose estimation for a robot-controlled hand exoskeleton in a simulation. For hand pose estimation we adopt a Convolutional Neural Network (CNN). We train and evaluate this network with computer graphics, created by our own data generator. In order to guide further design decisions we focus in our experiments on two egocentric camera viewpoints tested on synthetic data with the help of a 3D-scanned hand model, with and without an exoskeleton attached to it.We observe that hand pose estimation with a wrist-mounted camera performs more accurate than with a head-mounted camera in the context of our simulation. Further, a grasp assistance system attached to the hand alters visual appearance and can improve hand pose estimation. Our experiment provides useful insights for the integration of sensors into a context sensitive analysis framework for intelligent assistance.
The digital transformation of our life changes the way we work, learn, communicate, and collaborate. Enterprises are presently transforming their strategy, culture, processes, and their information systems to become digital. The digital transformation deeply disrupts existing enterprises and economies. Digitization fosters the development of IT systems with many rather small and distributed structures, like Internet of Things, Microservices and mobile services. Since years a lot of new business opportunities appear using the potential of services computing, Internet of Things, mobile systems, big data with analytics, cloud computing, collaboration networks, and decision support. Biological metaphors of living and adaptable ecosystems provide the logical foundation for self optimizing and resilient run-time environments for intelligent business services and adaptable distributed information systems with service oriented enterprise architectures. This has a strong impact for architecting digital services and products following both a value-oriented and a service perspective. The change from a closed world modeling world to a more flexible open-world composition and evolution of enterprise architectures defines the moving context for adaptable and high distributed systems, which are essential to enable the digital transformation. The present research paper investigates the evolution of Enterprise Architecture considering new defined value-oriented mappings between digital strategies, digital business models and an improved digital enterprise architecture.
Modeling interactive Enterprise Architecture visualizations: an extended architecture description
(2018)
Enterprise architectures consist of a multitude of architecture elements, which relate in manifold ways to each other. Due to the high number of relationships between these elements, architectural analysis mechanisms are essential for all stakeholders to keep track and to work out relevant model characteristics. In practice EAs are often analyzed using visualizations by hand. However, the visualizations are often static and there are only few interaction possibilities. As a result, new visualizations have to be created or configured by experts if information demands change. In addition, hardly any tools are used for analysis of complex model characteristics. In this article we introduce an extended conceptualization of the architecture description that defines the structure of interactive visualizations and the integration of further tools to flexibly respond to the information demands of stakeholders. In addition, we develop a so-called Architecture Cockpit that realizes the extended conceptualization in a prototype. At the end we demonstrate and evaluate our approach through a practical test in a company in the finance and insurance industry.
Unternehmen stehen aktuell aufgrund der Digitalisierung, des stetigen technologischen Fortschritts und immer kürzer werdenden Produktlebenszyklen vor großen Herausforderungen. Um am Markt bestehen zu können, müssen Geschäftsmodelle öfter und schneller an sich verändernde Marktverhältnisse angepasst werden als dies früher der Fall war. Eine schnelle Anpassungsfähigkeit, auch Agilität genannt, ist in der heutigen Zeit ein entscheidender Wettbewerbsfaktor. Aufgrund des stetig wachsenden IT Anteils in Produkten sowie der Tatsache, dass diese IT-gestützt hergestellt werden, haben Änderungen des Geschäftsmodells große Auswirkungen auf die Unternehmensarchitektur eines Unternehmens.
Eine Unternehmensarchitektur umspannt das Unternehmen, indem diese die fachlichen und technischen Strukturen, insbesondere die gesamte IT, des Unternehmens beinhaltet und integriert. Das Management der Unternehmensarchitektur ist die Disziplin zur Beherrschung und Abstimmung dieser Strukturen. An der Gestaltung der Unternehmensarchitektur wirken viele Stakeholder mit individuellen und teils gegensätzlichen Interessen aus den unterschiedlichsten Bereichen des Unternehmens mit. Dies macht die Entscheidungsfindung zu einer komplexen Aufgabe.
Die in dieser Arbeit entworfene integrative Methode für die Entscheidungsfindung hat das Ziel, die Betroffenen und Beteiligten, im Folgenden Stakeholder, bei ihren Entscheidungen zu unterstützen. Die Grundidee hierbei ist die systematische Einbeziehung der Interessen der Stakeholder und davon abgeleiteter Visualisierungen. Dies verleiht der Methode ihren integrativen Charakter und hilft Abhängigkeiten zwischen Stakeholdern zu erkennen. Dadurch wird die Zusammenarbeit zwischen den an Entscheidungen beteiligten Stakeholdern gefördert. Neben der systematischen Einbeziehung von Visualisierungen wird im Rahmen dieser Arbeit das Konzept der Technik eingeführt. Techniken werden ebenfalls von den Interessen der Stakeholder abgeleitet und dienen der Unterstützung bei der Durchführung von Aktivitäten der Entscheidungsfindung, indem Vorgehensweisen bei bestimmten Aufgaben vorgegeben oder Teilprozesse der Entscheidungsfindung sogar automatisiert durchgeführt werden. Das Konzept der Technik, die systematische Ableitung von den Interessen der Stakeholder sowie das Zusammenspiel mit Visualisierungen wird in dieser Arbeit in Form einer erweiterten Konzeptualisierung der Architekturbeschreibung definiert.
Da die Werkzeugunterstützung in der Praxis häufig eine Herausforderung darstellt, rundet diese Arbeit ein eigens konzipiertes und prototypisch validiertes Architekturcockpit ab. Das Cockpit ist eine auf einem elektronischen Sitzungsraum basierende Werkzeugunterstützung der eingeführten integrativen Methode.
With the digital transformation being one of the most discussed topics in the business world today, many enterprises – especially small and medium sized ones – find themselves struggling with the understanding of new digital technologies and thus the potential benefits and risks for their companies. New technologies like the Internet of Things, Blockchain or Machine Learning have great potential for businesses. However, carefully evaluating and selecting purposeful technologies – aligned to the digital strategy – is the key to success. Technologies appear, change and also vanish so rapidly in the digital age, that a proper understanding is crucial for a sustainable technological foundation. Focusing on the characteristic features of technologies, the presented approach promises to create a better technological understanding for decision makers in small and medium-sized enterprises (SMEs) in a playful manner: With a serious game that fosters insight and allays fears of digitalization.
Free-floating e-scooter sharing is an upcoming trend in mobility, which has been spreading since 2015 in various German cities. Unlike the more scientifically explorend car sharing, the usage patterns and behaviors of e-scooter sharing customers are yet to be analyzed. This presumably discovers better ways to attract customers as well as adaptions of the business model in order to increase scooter utilization and therefore the profit of the e-scooter providers. As most of the customer's journey, from registration to scooter reservation and the ride itself, is digitally traceable, large datasets are available allowing for understanding of customers' needs and motivations. Based on these datasets of an e-scooter provider operating in a big German city we propose a customer clustering that identifies four different customer segments, which enables multiple conclusions to be drawn for business development and improving the problem-solution fit of the e-scooter sharing model.
A halo effect can lead to significantly biased and distorted judgments in numerous situations and settings in daily life. However, its impact has barely been researched in the sporting environment, although it might help a great deal in understanding how sport fans think and behave. This paper provides an empirical study based on two German soccer clubs, VfB Stuttgart and FC Bayern Munich, analyzing the presence of halo effects. The purpose of this study is to answer the question that is interesting for both theory and practice: Does a halo effect exist in professional soccer?
A novel gate driving approach to balance the transient current of parallel-connected GaN-HEMTs
(2018)
To enable higher current handling capability of GaN-based DC/DC converters, devices have to be used in parallel. However, their switching times differ, especially if their threshold voltages are not identical, which causes unbalanced device current. This paper focuses on the homogeneous distribution of turn-on switching losses of GaN-HEMTs connected in parallel. By applying a new gate driver concept, the transient current is distributed evenly. The effectiveness of this concept is demonstrated by double pulse measurements, for switching currents up to 45A and a voltage of 400V. A uniform current distribution is achieved, including a reduction of the turn-on losses by 50% compared to a conventional setup.
Recognizing actions of humans, reliably inferring their meaning and being able to potentially exchange mutual social information are core challenges for autonomous systems when they directly share the same space with humans. Today’s technical perception solutions have been developed and tested mostly on standard vision benchmark datasets where manual labeling of sensory ground truth is a tedious but necessary task. Furthermore, rarely occurring human activities are underrepresented in such data leading to algorithms not recognizing such activities. For this purpose, we introduce a modular simulation framework which offers to train and validate algorithms on various environmental conditions. For this paper we created a dataset, containing rare human activities in urban areas, on which a current state of the art algorithm for pose estimation fails and demonstrate how to train such rare poses with simulated data only.
Am Körper getragenen Geräte, sog. Wearables, kommunizieren in der Regel über Bluetooth-Low-Energy (BLE) mit dem Smartphone. Viele Anwendungen, insbesondere im Bereich Gesundheit und AAL, basieren auf der Zusammenarbeit von Wearables mit SmartHome-Geräten. Diese Arbeit präsentiert die Definition und Implementierung von einem neuen BLE Profil für EKG, das Streaming der Signal zum SmartPhone und die Möglichkeit, mehrere solcher Biosignale parallel zu streamen, besitzt. Die Datenarchitektur der App erlaubt eine konfigurierbare Synchronisation der Signal mit dem SmartHome.
Rapid prototyping platforms reduce development time by allowing quick prototyping of a prototype idea and achieve more time for actual application development with user interfaces. This approach has long been followed in technical platforms, such as the Arduino. To transfer this form of prototyping to wearables, WearIT is presented in this paper.WearIT consists of four components as a wearable prototyping platform: (1) a vest, (2) sensor and actuator shields, (3) its own library and (4) a motherboard consisting of Arduino, Raspberry Pi, a board and a GPS module. As a result, a wearable prototype can be quickly developed by attaching sensor and actuator shields to the WearIT vest. These sensor and actuator shields can then be programmed through the WearIT library. Via Virtual Network Computing (VNC) with a remote computer, the screen contents of the Raspberry Pi can be accessed and the Arduino be programmed.
Einpaarige Verkabelungssysteme gewinnen aufgrund des Internets der Dinge und aufgrund deren Einsatz im Automobil- bzw. Industriebereich zunehmend an Bedeutung. Im Rahmen dieser Arbeit wird gezeigt, wie bei der Übertragung über ein einpaariges Kabel die Bitrate bei gleichbleibender Übertragungsbandbreite durch Nutzung des Phantomkreises erhöht werden kann. Als Übertragungsverfahren kommt jeweils eine 16-stufige Pulsamplitudenmodulation zum Einsatz. Die Ergebnisse werden durch Augendiagramme qualitativ und durch die Messung der Symbolfehler bzw. der Bitfehler quantitativ untersucht.