Informatik
Refine
Year of publication
- 2023 (70) (remove)
Document Type
- Conference proceeding (34)
- Journal article (29)
- Book chapter (4)
- Doctoral Thesis (3)
Has full text
- yes (70) (remove)
Is part of the Bibliography
- yes (70)
Institute
- Informatik (70)
Publisher
- Springer (17)
- Elsevier (9)
- IEEE (8)
- MDPI (5)
- Association for Computing Machinery (3)
- Academic Conferences International (2)
- Emerald (2)
- Hochschule Reutlingen (2)
- IARIA (2)
- IOP Publishing (2)
This paper presents the first part of a research-work conducted at the University of Applied Sciences (HFT- Stuttgart). The aim of the research was to investigate the potential of low-cost renewable energy systems to reduce the energy demand of the building sector in hot and dry areas. Radiative cooling to the night sky represents a low-cost renewable energy source. The dry desert climate conditions promote radiative cooling applications. The system technology adopted in this work is based on uncovered solar thermal collectors integrated into the building’s hydronic system. By implementing different control strategies, the same system could be used for cooling as well as for heating applications. This paper focuses on identifying the collector parameters which are required as the coefficients to configure such an unglazed collector for calibrating its mathematical model within the simulation environment. The parameter identification process implies testing the collector for its thermal performance. This paper attempts to provide an insight into the dynamic testing of uncovered solar thermal collectors (absorbers), taking into account their prospective operation at nighttime for radiative cooling applications. In this study, the main parameters characterizing the performance of the absorbers for radiative cooling applications are identified and obtained from standardized testing protocol. For this aim, a number of plastic solar absorbers of different designs were tested on the outdoor test-stand facility at HFT-Stuttgart for the characterization of their thermal performance. The testing process was based on the quasi-dynamic test method of the international standard for solar thermal collectors EN ISO 9806. The test database was then used within a mathematical optimization tool (GenOpt) to determine the optimal parameter settings of each absorber under testing. Those performance parameters were significant to compare the thermal performance of the tested absorbers. The coefficients (identified parameters) were used then to plot the thermal efficiency curves of all absorbers, for both the heating and cooling modes of operation. Based on the intended main scope of the system utilization (heating or cooling), the tested absorbers could be benchmarked. Hence, one of those absorbers was selected to be used in the following simulation phase as was planned in the research-project.
During the first years of the last decade, Egypt used to face recurrent electricity cut-offs in summer. In the past few years, the electricity tariff dramatically increased. Radiative cooling to the clear night sky is a renewable energy source that represents a relative solution. The dry desert climate promotes nocturnal radiative cooling applications. This study investigates the potential of nocturnal radiative cooling systems (RCSs) to reduce the energy consumption of the residential building sector in Egypt. The system technology proposed in this work is based on uncovered solar thermal collectors integrated into the building hydronic system. By implementing different control strategies, the same system could be used for both cooling and heating applications. The goal of this paper is to analyze the performance of RCSs in residential buildings in Egypt. The dynamic simulation program TRNSYS was used to simulate the thermal behavior of the system. The relevant issues of Egypt as a case-study are firstly overviewed. Then the paper introduces the work done to develop a building model that represents a typical residential apartment in Egypt. Typical occupancy profiles were developed to define the internal thermal gains. The adopted control strategy to optimize the system operation is presented as well. To fully understand and hence evaluate the operation of the proposed RCS, four simulation cases were considered: 1. a reference case (fully passive), 2. the stand-alone operation of the RCS, 3. ideal heating & cooling operation (fully-active), and 4. the hybrid-operation (when the active cooling system is supported by the proposed RCS). The analysis considered the main three distinct climates in Egypt, represented by the cities of Alexandria, Cairo and Asyut. The hotter and drier weather conditions resulted in a higher cooling potential and larger temperature differences. The simulated cooling power in Asyut was 28.4 W/m² for a 70 m² absorber field. For a smaller field area of 10 m², the cooling power reached 109 W/m² but with humble temperature differences. To meet the rigorous thermal comfort conditions, the proposed sensible RCS cannot fully replace conventional air-conditioning units, especially in humid areas like Alexandria. When working in a hybrid system, a 10% reduction in the active cooling energy demand could be achieved in Asyut to keep the cooling set-point at 24 °C. This percentage reduction was nearly doubled when the thermal comfort set-point was increased by two degrees (26 °C). In a sensitivity analysis, external shading devices as a passive measure as well as the implementation of the Egyptian code for buildings (ECP306/1–2005) were also investigated. The analysis of this study raised other relevant aspects to discuss, e.g. system-sizing, environmental effects, limitations and recommendations.
Monitoring heart rate and breathing is essential in understanding the physiological processes for sleep analysis. Polysomnography (PSG) system have traditionally been used for sleep monitoring, but alternative methods can help to make sleep monitoring more portable in someone's home. This study conducted a series of experiments to investigate the use of pressure sensors placed under the bed as an alternative to PSG for monitoring heart rate and breathing during sleep. The following sets of experiments involved the addition of small rubber domes - transparent and black - that were glued to the pressure sensor. The resulting data were compared with the PSG system to determine the accuracy of the pressure sensor readings. The study found that the pressure sensor provided reliable data for extracting heart rate and respiration rate, with mean absolute errors (MAE) of 2.32 and 3.24 for respiration and heart rate, respectively. However, the addition of small rubber hemispheres did not significantly improve the accuracy of the readings, with MAEs of 2.3 bpm and 7.56 breaths per minute for respiration rate and heart rate, respectively. The findings of this study suggest that pressure sensors placed under the bed may serve as a viable alternative to traditional PSG systems for monitoring heart rate and breathing during sleep. These sensors provide a more comfortable and non-invasive method of sleep monitoring. However, the addition of small rubber domes did not significantly enhance the accuracy of the readings, indicating that it may not be a worthwhile addition to the pressure sensor system.
The performance and scalability of modern data-intensive systems are limited by massive data movement of growing datasets across the whole memory hierarchy to the CPUs. Such traditional processor-centric DBMS architectures are bandwidth- and latency-bound. Processing-in-Memory (PIM) designs seek to overcome these limitations by integrating memory and processing functionality on the same chip. PIM targets near- or in-memory data processing, leveraging the greater in-situ parallelism and bandwidth.
In this paper, we introduce pimDB and provide an initial comparison of processor-centric and PIM-DBMS approaches under different aspects, such as scalability and parallelism, cache-awareness, or PIM-specific compute/bandwidth tradeoffs. The evaluation is performed end-to-end on a real PIM hardware system from UPMEM.
Large critical systems, such as those created in the space domain, are usually developed by a large number of organizations and, furthermore, they have to comply with standards. Yet, the different stakeholders often do not have a common understanding of the needed quality of requirements specifications. Achieving such a common understanding is a laborious process that is currently not sufficiently supported. Moreover, such a common understanding must be aligned with the standards. In this paper, we present an approach that can be used to align the different stakeholder perceptions regarding the quality of requirements specifications. Existing quality models for requirements specifications are analyzed for equivalences, and transferred into a common representation, the so-called Aligned Quality Map (AQM). Furthermore, a process is defined that supports the alignment of different stakeholder perspectives with regard to the quality of requirements specifications using AQM, which is validated in a case study in the context of European space projects. AQM has been created and populated with an initial set of quality models. It is designed in such way that it can be extended to include further quality models. The case study has shown that an alignment of different stakeholder perspectives and the quality model of the European Cooperation for Space Standardization using AQM is feasible. The approach allows for aligning different stakeholder perspectives for a common understanding of the quality of requirements specifications in the context of standards. Furthermore, AQM supports the assessment of requirements specifications.
Context
Web APIs are one of the most used ways to expose application functionality on the Web, and their understandability is important for efficiently using the provided resources. While many API design rules exist, empirical evidence for the effectiveness of most rules is lacking.
Objective
We therefore wanted to study 1) the impact of RESTful API design rules on understandability, 2) if rule violations are also perceived as more difficult to understand, and 3) if demographic attributes like REST-related experience have an influence on this.
Method
We conducted a controlled Web-based experiment with 105 participants, from both industry and academia and with different levels of experience. Based on a hybrid between a crossover and a between-subjects design, we studied 12 design rules using API snippets in two complementary versions: one that adhered to a rule and one that was a violation of this rule. Participants answered comprehension questions and rated the perceived difficulty.
Results
For 11 of the 12 rules, we found that violation performed significantly worse than rule for the comprehension tasks. Regarding the subjective ratings, we found significant differences for 9 of the 12 rules, meaning that most violations were subjectively rated as more difficult to understand. Demographics played no role in the comprehension performance for violation.
Conclusions
Our results provide first empirical evidence for the importance of following design rules to improve the understandability of Web APIs, which is important for researchers, practitioners, and educators.
Sleep is extremely important for physical and mental health. Although polysomnography is an established approach in sleep analysis, it is quite intrusive and expensive. Consequently, developing a non-invasive and non-intrusive home sleep monitoring system with minimal influence on patients, that can reliably and accurately measure cardiorespiratory parameters, is of great interest. The aim of this study is to validate a non-invasive and unobtrusive cardiorespiratory parameter monitoring system based on an accelerometer sensor. This system includes a special holder to install the system under the bed mattress. The additional aim is to determine the optimum relative system position (in relation to the subject) at which the most accurate and precise values of measured parameters could be achieved. The data were collected from 23 subjects (13 males and 10 females). The obtained ballistocardiogram signal was sequentially processed using a sixth-order Butterworth bandpass filter and a moving average filter. As a result, an average error (compared to reference values) of 2.24 beats per minute for heart rate and 1.52 breaths per minute for respiratory rate was achieved, regardless of the subject’s sleep position. For males and females, the errors were 2.28 bpm and 2.19 bpm for heart rate and 1.41 rpm and 1.30 rpm for respiratory rate. We determined that placing the sensor and system at chest level is the preferred configuration for cardiorespiratory measurement. Further studies of the system’s performance in larger groups of subjects are required, despite the promising results of the current tests in healthy subjects.
Sleep is an essential part of human existence, as we are in this state for approximately a third of our lives. Sleep disorders are common conditions that can affect many aspects of life. Sleep disorders are diagnosed in special laboratories with a polysomnography system, a costly procedure requiring much effort for the patient. Several systems have been proposed to address this situation, including performing the examination and analysis at the patient's home, using sensors to detect physiological signals automatically analysed by algorithms. This work aims to evaluate the use of a contactless respiratory recording system based on an accelerometer sensor in sleep apnea detection. For this purpose, an installation mounted under the bed mattress records the oscillations caused by the chest movements during the breathing process. The presented processing algorithm performs filtering of the obtained signals and determines the apnea events presence. The performance of the developed system and algorithm of apnea event detection (average values of accuracy, specificity and sensitivity are 94.6%, 95.3%, and 93.7% respectively) confirms the suitability of the proposed method and system for further ambulatory and in-home use.
Sleep is essential to physical and mental health. However, the traditional approach to sleep analysis—polysomnography (PSG)—is intrusive and expensive. Therefore, there is great interest in the development of non-contact, non-invasive, and non-intrusive sleep monitoring systems and technologies that can reliably and accurately measure cardiorespiratory parameters with minimal impact on the patient. This has led to the development of other relevant approaches, which are characterised, for example, by the fact that they allow greater freedom of movement and do not require direct contact with the body, i.e., they are non-contact. This systematic review discusses the relevant methods and technologies for non-contact monitoring of cardiorespiratory activity during sleep. Taking into account the current state of the art in non-intrusive technologies, we can identify the methods of non-intrusive monitoring of cardiac and respiratory activity, the technologies and types of sensors used, and the possible physiological parameters available for analysis. To do this, we conducted a literature review and summarised current research on the use of non-contact technologies for non-intrusive monitoring of cardiac and respiratory activity. The inclusion and exclusion criteria for the selection of publications were established prior to the start of the search. Publications were assessed using one main question and several specific questions. We obtained 3774 unique articles from four literature databases (Web of Science, IEEE Xplore, PubMed, and Scopus) and checked them for relevance, resulting in 54 articles that were analysed in a structured way using terminology. The result was 15 different types of sensors and devices (e.g., radar, temperature sensors, motion sensors, cameras) that can be installed in hospital wards and departments or in the environment. The ability to detect heart rate, respiratory rate, and sleep disorders such as apnoea was among the characteristics examined to investigate the overall effectiveness of the systems and technologies considered for cardiorespiratory monitoring. In addition, the advantages and disadvantages of the considered systems and technologies were identified by answering the identified research questions. The results obtained allow us to determine the current trends and the vector of development of medical technologies in sleep medicine for future researchers and research.
Smart cities are considered data factories that generate an enormous amount of data from various sources. In fact data is the backbone of any smart services. Therefore, the strategic beneficial handling of this digital capital is crucial for cities. Some smart city pioneers have already written down their approach to data in the form of data strategies, but what should a city's data strategy include, and how can the goals and measures defined in the strategies be operationalized? This paper addresses these questions by looking closely at the data strategies of cities in Germany and the top three countries in the EU Digital Economy and Society Index. The in-depth analysis of 8 city data strategies has yielded 11 dimensions that cities should consider in their data strategy. These are relevance of data, principles, methods, data sharing, technology, data culture, data ethics, organizational structure, data security and privacy, collaborations, data literacy. In addition, data governance is a concept to put these 11 strategic dimensions into practice through standardization measures, training programs, and defining roles and responsibilities by developing a data catalog.
The benefits of urban data cannot be realized without a political and strategic view of data use. A core concept within this view is data governance, which aligns strategy in data-relevant structures and entities with data processes, actors, architectures, and overall data management. Data governance is not a new concept and has long been addressed by scientists and practitioners from an enterprise perspective. In the urban context, however, data governance has only recently attracted increased attention, despite the unprecedented relevance of data in the advent of smart cities. Urban data governance can create semantic compatibility between heterogeneous technologies and data silos and connect stakeholders by standardizing data models, processes, and policies. This research provides a foundation for developing a reference model for urban data governance, identifies challenges in dealing with data in cities, and defines factors for the successful implementation of urban data governance. To obtain the best possible insights, the study carries out qualitative research following the design science research paradigm, conducting semi-structured expert interviews with 27 municipalities from Austria, Germany, Denmark, Finland, Sweden, and the Netherlands. The subsequent data analysis based on cognitive maps provides valuable insights into urban data governance. The interview transcripts were transferred and synthesized into comprehensive urban data governance maps to analyze entities and complex relationships with respect to the current state, challenges, and success factors of urban data governance. The findings show that each municipal department defines data governance separately, with no uniform approach. Given cultural factors, siloed data architectures have emerged in cities, leading to interoperability and integrability issues. A city-wide data governance entity in a cross-cutting function can be instrumental in breaking down silos in cities and creating a unified view of the city’s data landscape. The further identified concepts and their mutual interaction offer a powerful tool for developing a reference model for urban data governance and for the strategic orientation of cities on their way to data-driven organizations.
Human recognition is an important part of perception systems, such as those used in autonomous vehicles or robots. These systems often use deep neural networks for this purpose, which rely on large amounts of data that ideally cover various situations, movements, visual appearances, and interactions. However, obtaining such data is typically complex and expensive. In addition to raw data, labels are required to create training data for supervised learning. Thus, manual annotation of bounding boxes, keypoints, orientations, or actions performed is frequently necessary. This work addresses whether the laborious acquisition and creation of data can be simplified through targeted simulation. If data are generated in a simulation, information such as positions, dimensions, orientations, surfaces, and occlusions are already known, and appropriate labels can be generated automatically. A key question is whether deep neural networks, trained with simulated data, can be applied to real data. This work explores the use of simulated training data using examples from the field of pedestrian detection for autonomous vehicles. On the one hand, it is shown how existing systems can be improved by targeted retraining with simulation data, for example to better recognize corner cases. On the other hand, the work focuses on the generation of data that hardly or not occur at all in real standard datasets. It will be demonstrated how training data can be generated by targeted acquisition and combination of motion data and 3D models, which contain finely graded action labels to recognize even complex pedestrian situations. Through the diverse annotation data that simulations provide, it becomes possible to train deep neural networks for a wide variety of tasks with one dataset. In this work, such simulated data is used to train a novel deep multitask network that brings together diverse, previously mostly independently considered but related, tasks such as 2D and 3D human pose recognition and body and orientation estimation.
Die digitale Transformation ist die heute vorherrschende geschäftliche Transformation, die einen starken Einfluss darauf hat, wie digitale Dienstleistungen und Produkte dienstleistungsdominant gestaltet werden. Eine beliebte zugrundeliegende Theorie der Wertschöpfung und des wirtschaftlichen Austauschs, die als dienstleistungsdominante Logik (S-D) bekannt ist, kann mit vielen erfolgreichen digitalen Geschäftsmodellen verbunden werden. Allerdings ist die S-D-Logik an sich abstrakt. Unternehmen können sie nicht ohne Weiteres als Instrument für die Innovation und Gestaltung von Geschäftsmodellen nutzen. Um dies zu ändern, wird eine umfassende Ideenfindungsmethode auf der Grundlage der S-D-Logik vorgeschlagen, die als service-dominantes Design (SDD) bezeichnet wird. SDD zielt darauf ab, Unternehmen beim Übergang zu einer service- und wertorientierten Perspektive zu unterstützen. Die Methode bietet eine vereinfachte Möglichkeit, den Ideenfindungsprozess auf der Grundlage von vier Modellkomponenten zu strukturieren. Jede Komponente besteht aus praktischen Implikationen, Hilfsfragen und Visualisierungstechniken, die aus einer Literaturrecherche, einer Anwendungsfallbewertung der digitalen Mobilität und einer Fokusgruppendiskussion abgeleitet wurden. SDD ist ein erster Schritt zu einem Toolset, das etablierte Unternehmen bei der Service- und Werteorientierung im Rahmen ihrer digitalen Transformation unterstützen kann.
Purpose
In recognising the key role of business intelligence and big data analytics in influencing companies’ decision-making processes, this paper aims to codify the main phases through which companies can approach, develop and manage big data analytics.
Design/methodology/approach
By adopting a research strategy based on case studies, this paper depicts the main phases and challenges that companies “live” through in approaching big data analytics as a way to support their decision-making processes. The analysis of case studies has been chosen as the main research method because it offers the possibility for different data sources to describe a phenomenon and subsequently to develop and test theories.
Findings
This paper provides a possible depiction of the main phases and challenges through which the approach(es) to big data analytics can emerge and evolve over time with reference to companies’ decision-making processes.
Research limitations/implications
This paper recalls the attention of researchers in defining clear patterns through which technology-based approaches should be developed. In its depiction of the main phases of the development of big data analytics in companies’ decision-making processes, this paper highlights the possible domains in which to define and renovate approaches to value. The proposed conceptual model derives from the adoption of an inductive approach. Despite its validity, it is discussed and questioned through multiple case studies. In addition, its generalisability requires further discussion and analysis in the light of alternative interpretative perspectives.
Practical implications
The reflections herein offer practitioners interested in company management the possibility to develop performance measurement tools that can evaluate how each phase can contribute to companies’ value creation processes.
Originality/value
This paper contributes to the ongoing debate about the role of digital technologies in influencing managerial and social models. This paper provides a conceptual model that is able to support both researchers and practitioners in understanding through which phases big data analytics can be approached and managed to enhance value processes.
Artificial intelligence (AI) is one of the most promising technologies of the post-pandemic era. Cloud computing technology can simplify the process of developing AI applications by offering a variety of services, including ready-to-use tools to train machine learning (ML) algorithms. However, comparing the vast amount of services offered by different providers and selecting a suitable cloud service can be a major challenge for many firms. Also in academia, suitable criteria to evaluate this type of service remain largely unclear. Therefore, the overall aim of this work has been to develop a framework to evaluate cloud-based ML services. We use Design Science Research as our methodology and conduct a hermeneutic literature review, a vendor analysis, as well as, expert interviews. Based on our research, we present a novel framework for the evaluation of cloud-based ML services consisting of six categories and 22 criteria that are operationalized with the help of various metrics. We believe that our results will help organizations by providing specific guidance on how to compare and select service providers from the vast amount of potential suppliers.
Introduction to the special issue on self‑managing and hardware‑optimized database systems 2022
(2023)
Data management systems have evolved in terms of functionality, performance characteristics, complexity, and variety during the last 40 years. Particularly, the relational database management systems and the big data systems (e.g., Key-Value stores, Document stores, Graph stores and Graph Computation Systems, Spark, MapReduce/Hadoop, or Data Stream Processing Systems) have evolved with novel additions and extensions. However, the systems administration and tasks have become highly complex and expensive, especially given the simultaneous and rapid hardware evolution in processors, memory, storage, or networking. These developments present new open problems and challenges to data management systems as well as new opportunities.
The SMDB (International Workshop on Self-Managing Database Systems) and HardBD&Active (Joint International Workshop on Big Data Management on Emerging Hardware and Data Management on Virtualized Active Systems) workshops organized in conjunction with the IEEE ICDE (International Conference on Data Engineering) offered two distinct platforms for examining the above system-related challenges from different perspectives. The SMDB workshop looks into developing autonomic or self-* features in database and data management systems to tackle complex administrative tasks, while the HardBD&Active workshop focuses on harnessing hardware technologies to enhance efficiency and performance of data processing and management tasks. As a result of these workshops, we are delighted to present the third special issue of DAPD titled “Self-Managing and Hardware-Optimized Database Systems 2022,” which showcases the best contributions from the SMDB 2021/2022 and HardBD&Active 2021/2022 workshops.
Recent work on database application development platforms has sought to include a declarative formulation of a conceptual data model in the application code, using annotations or attributes. Some recent work has used metadata to include the details of such formulations in the physical database, and this approach brings significant advantages in that the model can be enforced across a range of applications for a single database. In previous work, we have discussed the advantages for enterprise integration of typed graph data models (TGM), which can play a similar role in graphical databases, leveraging the existing support for the unified modelling language UML. Ideally, the integration of systems designed with different models, for example, graphical and relational database, should also be supported. In this work, we implement this approach, using metadata in a relational database management system (DBMS).
Blockchains have become increasingly important in recent years and have expanded their applicability to many domains beyond finance and cryptocurrencies. This adoption has particularly increased with the introduction of smart contracts, which are immutable, user-defined programs directly deployed on blockchain networks. However, many scenarios require business transactions to simultaneously access smart contracts on multiple, possibly heterogeneous blockchain networks while ensuring the atomicity and isolation of these transactions, which is not natively supported by current blockchain systems. Therefore, in this work, we introduce the Transactional Cross-Chain Smart Contract Invocation (TCCSCI) approach that supports such distributed business transactions while ensuring their global atomicity and serializability. The approach introduces the concept of Resource Manager Smart Contracts, and 2PC for Blockchains (2PC4BC), a client-driven Atomic Commit Protocol (ACP) specialized for blockchain-based distributed transactions. We validate our approach using a prototypical implementation, evaluate its introduced overhead, and prove its correctness.
The influence of sleep on human health is enormous. Accordingly, sleep disorders can have a negative impact on it. To avoid this, they should be identified and treated in time. For this purpose, objective (with an appropriate device) or subjective (based on perceived values) measurement methods are used for sleep analysis to understand the problem. The aim of this work is to find out whether an exchange of the two methods is possible and can provide reliable results. In accordance with this goal, a study was conducted with people aged over 65 years old (a total of 154 night-time recordings) in which both measurement methods were compared. Sleep questionnaires and electronic devices for sleep assessment placed under the mattress were applied to achieve the study aims. The obtained results indicated that the correlation between both measurement methods could be observed for sleep characteristics such as total sleep time, total time in bed and sleep efficiency. However, there are also significant differences in absolute values of the two measurement approaches for some subjects/nights, which leads us to conclude that the substitution is more likely to be considered in case of long-term monitoring where the trends are of more importance and not the absolute values for individual nights.
In order to ensure sufficient recovery of the human body and brain, healthy sleep is indispensable. For this purpose, appropriate therapy should be initiated at an early stage in the case of sleep disorders. For some sleep disorders (e.g., insomnia), a sleep diary is essential for diagnosis and therapy monitoring. However, subjective measurement with a sleep diary has several disadvantages, requiring regular action from the user and leading to decreased comfort and potential data loss. To automate sleep monitoring and increase user comfort, one could consider replacing a sleep diary with an automatic measurement, such as a smartwatch, which would not disturb sleep. To obtain accurate results on the evaluation of the possibility of such a replacement, a field study was conducted with a total of 166 overnight recordings, followed by an analysis of the results. In this evaluation, objective sleep measurement with a Samsung Galaxy Watch 4 was compared to a subjective approach with a sleep diary, which is a standard method in sleep medicine. The focus was on comparing four relevant sleep characteristics: falling asleep time, waking up time, total sleep time (TST), and sleep efficiency (SE). After evaluating the results, it was concluded that a smartwatch could replace subjective measurement to determine falling asleep and waking up time, considering some level of inaccuracy. In the case of SE, substitution was also proved to be possible. However, some individual recordings showed a higher discrepancy in results between the two approaches. For its part, the evaluation of the TST measurement currently does not allow us to recommend substituting the measurement method for this sleep parameter. The appropriateness of replacing sleep diary measurement with a smartwatch depends on the acceptable levels of discrepancy. We propose four levels of similarity of results, defining ranges of absolute differences between objective and subjective measurements. By considering the values in the provided table and knowing the required accuracy, it is possible to determine the suitability of substitution in each individual case. The introduction of a “similarity level” parameter increases the adaptability and reusability of study findings in individual practical cases.
Fragestellung: Das klinische Standardverfahren und Referenz der Schlafmessung und der Klassifizierung der einzelnen Schlafstadien ist die Polysomnographie (PSG). Alternative Ansätze zu diesem aufwändigen Verfahren könnten einige Vorteile bieten, wenn die Messungen auf eine komfortablere Weise durchgeführt werden. Das Hauptziel dieser Forschung Studie ist es, einen Algorithmus für die automatische Klassifizierung von Schlafstadien zu entwickeln, der ausschließlich Bewegungs- und Atmungssignale verwendet [1].
Patienten und Methoden: Nach der Analyse der aktuellen Forschungsarbeiten haben wir multinomiale logistische Regression als Grundlage für den Ansatz gewählt [2]. Um die Genauigkeit der Auswertung zu erhöhen, wurden vier Features entwickelt, die aus Bewegungs- und Atemsignalen abgeleitet wurden. Für die Auswertung wurden die nächtlichen Aufzeichnungen von 35 Personen verwendet, die von der Charité-Universitätsmedizin Berlin zur Verfügung gestellt wurden. Das Durchschnittsalter der Teilnehmer betrug 38,6 +/– 14,5 Jahre und der BMI lag bei durchschnittlich 24,4 +/– 4,9 kg/m2. Da der Algorithmus mit drei Stadien arbeitet, wurden die Stadien N1, N2 und N3 zum NREM-Stadium zusammengeführt. Der verfügbare Datensatz wurde strikt aufgeteilt: in einen Trainingsdatensatz von etwa 100 h und in einen Testdatensatz mit etwa 160 h nächtlicher Aufzeichnungen. Beide Datensätze wiesen ein ähnliches Verhältnis zwischen Männern und Frauen auf, und der durchschnittliche BMI wies keine signifikante Abweichung auf.
Ergebnisse: Der Algorithmus wurde implementiert und lieferte erfolgreiche Ergebnisse: die Genauigkeit der Erkennung von Wach-/NREM-/REM-Phasen liegt bei 73 %, mit einem Cohen’s Kappa von 0,44 für die analysierten 19.324 Schlafepochen von jeweils 30 s. Die beobachtete gewisse Überschätzung der NREM-Phase lässt sich teilweise durch ihre Prävalenz in einem typischen Schlafmuster erklären. Selbst die Verwendung eines ausbalancierten Trainingsdatensatzes konnte dieses Problem nicht vollständig lösen.
Schlussfolgerungen: Die erreichten Ergebnisse haben die Tauglichkeit des Ansatzes prinzipiell bestätigt. Dieser hat den Vorteil, dass nur Bewegungs- und Atemsignale verwendet werden, die mit weniger Aufwand und komfortabler für Benutzer aufgezeichnet werden können als z. B. Herz- oder EEG-Signale. Daher stellt das neue System eine deutliche Verbesserung im Vergleich zu bestehenden Ansätzen dar. Die Zusammenführung der beschriebenen algorithmischen Software mit dem in [1] beschriebenen Hardwaresystem zur Messung von Atem- und Körperbewegungssignalen zu einem autonomen, berührungslosen System zur kontinuierlichen Schlafüberwachung ist eine mögliche Richtung zukünftiger Arbeiten.
The scoring of sleep stages is one of the essential tasks in sleep analysis. Since a manual procedure requires considerable human and financial resources, and incorporates some subjectivity, an automated approach could result in several advantages. There have been many developments in this area, and in order to provide a comprehensive overview, it is essential to review relevant recent works and summarise the characteristics of the approaches, which is the main aim of this article. To achieve it, we examined articles published between 2018 and 2022 that dealt with the automated scoring of sleep stages. In the final selection for in-depth analysis, 125 articles were included after reviewing a total of 515 publications. The results revealed that automatic scoring demonstrates good quality (with Cohen's kappa up to over 0.80 and accuracy up to over 90%) in analysing EEG/EEG + EOG + EMG signals. At the same time, it should be noted that there has been no breakthrough in the quality of results using these signals in recent years. Systems involving other signals that could potentially be acquired more conveniently for the user (e.g. respiratory, cardiac or movement signals) remain more challenging in the implementation with a high level of reliability but have considerable innovation capability. In general, automatic sleep stage scoring has excellent potential to assist medical professionals while providing an objective assessment.
Healthy sleep is one of the prerequisites for a good human body and brain condition, including general well-being. Unfortunately, there are several sleep disorders that can negatively affect this. One of the most common is sleep apnoea, in which breathing is impaired. Studies have shown that this disorder often remains undiagnosed. To avoid this, developing a system that can be widely used in a home environment to detect apnoea and monitor the changes once therapy has been initiated is essential. The conceptualisation of such a system is the main aim of this research. After a thorough analysis of the available literature and state of the art in this area of knowledge, a concept of the system was created, which includes the following main components: data acquisition (including two parts), storage of the data, apnoea detection algorithm, user and device management, data visualisation. The modules are interchangeable, and interfaces have been defined for data transfer, most of which operate using the MQTT protocol. System diagrams and detailed component descriptions, including signal requirements and visualisation mockups, have also been developed. The system's design includes the necessary concepts for the implementation and can be realised in a prototype in the next phase.
Software development teams have to face stress caused by deadlines, staff turnover, or individual differences in commitment, expertise, and time zones. While students are typically taught the theory of software project management, their exposure to such stress factors is usually limited. However, preparing students for the stress they will have to endure once they work in project teams is important for their own sake, as well as for the sake of team performance in the face of stress. Team performance has been linked to the diversity of software development teams, but little is known about how diversity influences the stress experienced in teams. In order to shed light on this aspect, we provided students with the opportunity to self-experience the basics of project management in self-organizing teams, and studied the impact of six diversity dimensions on team performance, coping with stressors, and positive perceived learning effects. Three controlled experiments at two universities with a total of 65 participants suggest that the social background impacts the perceived stressors the most, while age and work experience have the highest impact on perceived learnings. Most diversity dimensions have a medium correlation with the quality of work, yet no significant relation to the team performance. This lays the foundation to improve students’ training for software engineering teamwork based on their diversity-related needs and to create diversity-sensitive awareness among educators, employers and researchers.
In modern collaborative production environments where industrial robots and humans are supposed to work hand in hand, it is mandatory to observe the robot’s workspace at all times. Such observation is even more crucial when the robot’s main position is also dynamic e.g. because the system is mounted on a movable platform. As current solutions like physically secured areas in which a robot can perform actions potentially dangerous for humans, become unfeasible in such scenarios, novel, more dynamic, and situation aware safety solutions need to be developed and deployed.
This thesis mainly contributes to the bigger picture of such a collaborative scenario by presenting a data-driven convolutional neural network-based approach to estimate the two-dimensional kinematic-chain configuration of industrial robot-arms within raw camera images. This thesis also provides the information needed to generate and organize the mandatory data basis and presents frameworks that were used to realize all involved subsystems. The robot-arm’s extracted kinematic-chain can also be used to estimate the extrinsic camera parameters relative to the robot’s three-dimensional origin. Further a tracking system, based on a two-dimensional kinematic chain descriptor is presented to allow for an accumulation of a proper movement history which enables the prediction of future target positions within the given image plane. The combination of the extracted robot’s pose with a simultaneous human pose estimation system delivers a consistent data flow that can be used in higher-level applications.
This thesis also provides a detailed evaluation of all involved subsystems and provides a broad overview of their particular performance, based on novel generated, semi automatically annotated, real datasets.
Sleep disorders can impact daily life, affecting physical, emotional, and cognitive well-being. Due to the time-consuming, highly obtrusive, and expensive nature of using the standard approaches such as polysomnography, it is of great interest to develop a noninvasive and unobtrusive in-home sleep monitoring system that can reliably and accurately measure cardiorespiratory parameters while causing minimal discomfort to the user’s sleep. We developed a low-cost Out of Center Sleep Testing (OCST) system with low complexity to measure cardiorespiratory parameters. We tested and validated two force-sensitive resistor strip sensors under the bed mattress covering the thoracic and abdominal regions. Twenty subjects were recruited, including 12 males and 8 females. The ballistocardiogram signal was processed using the 4th smooth level of the discrete wavelet transform and the 2nd order of the Butterworth bandpass filter to measure the heart rate and respiration rate, respectively. We reached a total error (concerning the reference sensors) of 3.24 beats per minute and 2.32 rates for heart rate and respiration rate, respectively. For males and females, heart rate errors were 3.47 and 2.68, and respiration rate errors were 2.32 and 2.33, respectively. We developed and verified the reliability and applicability of the system. It showed a minor dependency on sleeping positions, one of the major cumbersome sleep measurements. We identified the sensor under the thoracic region as the optimal configuration for cardiorespiratory measurement. Although testing the system with healthy subjects and regular patterns of cardiorespiratory parameters showed promising results, further investigation is required with the bandwidth frequency and validation of the system with larger groups of subjects, including patients.
Die Digitalisierung, der ständige technologische Fortschritt und immer kürzere Produktlebenszyklen stellen Unternehmen derzeit vor große Herausforderungen. Um am Markt erfolgreich zu sein, müssen Geschäftsmodelle häufiger und schneller als früher an veränderte Marktbedingungen angepasst werden. Schnelle Anpassungsfähigkeit, auch Agilität genannt, ist in der heutigen Zeit ein entscheidender Wettbewerbsfaktor. Aufgrund des ständig wachsenden IT-Anteils von Produkten und der Tatsache, dass diese mit Hilfe von IT hergestellt werden, hat die Änderung des Geschäftsmodells große Auswirkungen auf die Unternehmensarchitektur (EA). Die Entwicklung von EAs ist jedoch eine sehr komplexe Aufgabe, da viele Beteiligte mit gegensätzlichen Interessen in den Entscheidungsprozess eingebunden sind. Daher ist ein hohes Maß an Zusammenarbeit erforderlich. Um Unternehmen bei der Entwicklung ihrer EA zu unterstützen, wird in diesem Artikel eine neuartige integrative Methode vorgestellt, die die Interessen der Stakeholder systematisch in die Entscheidungsfindung einbezieht. Durch die Anwendung der Methode wird die Zusammenarbeit zwischen den beteiligten Interessengruppen verbessert, indem Berührungspunkte zwischen ihnen identifiziert werden. Darüber hinaus machen die standardisierten Aktivitäten die Entscheidungsfindung transparenter und vergleichbarer, ohne die Kreativität einzuschränken.
Purpose
For the modeling, execution, and control of complex, non-standardized intraoperative processes, a modeling language is needed that reflects the variability of interventions. As the established Business Process Model and Notation (BPMN) reaches its limits in terms of flexibility, the Case Management Model and Notation (CMMN) was considered as it addresses weakly structured processes.
Methods
To analyze the suitability of the modeling languages, BPMN and CMMN models of a Robot-Assisted Minimally Invasive Esophagectomy and Cochlea Implantation were derived and integrated into a situation recognition workflow. Test cases were used to contrast the differences and compare the advantages and disadvantages of the models concerning modeling, execution, and control. Furthermore, the impact on transferability was investigated.
Results
Compared to BPMN, CMMN allows flexibility for modeling intraoperative processes while remaining understandable. Although more effort and process knowledge are needed for execution and control within a situation recognition system, CMMN enables better transferability of the models and therefore the system. Concluding, CMMN should be chosen as a supplement to BPMN for flexible process parts that can only be covered insufficiently by BPMN, or otherwise as a replacement for the entire process.
Conclusion
CMMN offers the flexibility for variable, weakly structured process parts, and is thus suitable for surgical interventions. A combination of both notations could allow optimal use of their advantages and support the transferability of the situation recognition system.
The basis for developing future products in the automotive industry is finding creative and innovative solutions. Ideas can be found by means of creativity methods that support product developers throughout the creative process. Product developers are provided with a variety of different and new methods. This leads to a “method jungle” in which it is difficult for product developers to find the most suitable path. The successful use of methods in product development goes hand in hand with the acceptance and implementation of the methods. Despite the added value, only a low use is observed in the development process. The field of Creativity Support Tools also offers a wide variety of different tools that support the creativity process. Although a chasm exists between the many CSTs that are developed and what creative practitioners actually use. Therefore, previous studies iteratively developed a user-centered tool called “IDEA” that tries to provide a tool that responds to users' needs. The question arises how the developed tool IDEA performs in “real life setting” regarding its UX and usability as well as the creativity method acceptance and level of mental workload.
This project aims to evaluate existing big data infrastructures for their applicability in the operating room to support medical staff with context-sensitive systems. Requirements for the system design were generated. The project compares different data mining technologies, interfaces, and software system infrastructures with a focus on their usefulness in the peri-operative setting. The lambda architecture was chosen for the proposed system design, which will provide data for both postoperative analysis and real-time support during surgery.
Mobile monitoring of outpatients during cancer therapy becomes possible through technological advancements. This study leveraged a new remote patient monitoring app for in-between systemic therapy sessions. Patients’ evaluation showed that the handling is feasible. Clinical implementation must consider an adaptive development cycle for reliable operations.
OpenAPI, WADL, RAML, and API Blueprint are popular formats for documenting Web APIs. Although these formats are in general both human and machine-readable, only the part of the format describing the syntax of a Web API is machine-understandable. Descriptions, which explain the meaning and purpose of Web API elements, are embedded as natural language text snippets into documents and target human readers but not machines. To enable machines to read and process these state-of-practice Web API documentation, we propose a Transformer model that solves the generic task of identifying a Web API element within a syntax structure that matches a natural language query. For our first prototype, we focus on the Web API integration task of matching output with input parameters and fined-tuned a pre-trained CodeBERT model to the downstream task of question answering with samples from 2,321 OpenAPI documentation. We formulate the original question answering problem as a multiple choice task: given a semantic natural language description of an output parameter (question) and the syntax of the input schema (paragraph), the model chooses the input parameter (answer) in the schema that best matches the description. The paper describes the data preparation, tokenization, and fine-tuning process as well as discusses possible applications of our model as part of a recommender system. Furthermore, we evaluate the generalizability and the robustness of our fine-tuned model, with the result that it achieves an accuracy of 81.46% correctly chosen parameters.
For large-scale processes as implemented in organizations that develop software in regulated domains, comprehensive software process models are implemented, e.g., for compliance requirements. Creating and evolving such processes is demanding and requires software engineers having substantial modeling skills to create consistent and certifiable processes. While teaching process engineering to students, we observed issues in providing and explaining models. In this paper, we present an exploratory study in which we aim to shed light on the challenges students face when it comes to modeling. Our findings show that students are capable of doing basic modeling tasks, yet, fail in utilizing models correctly. We conclude that the required skills, notably abstraction and solution development, are underdeveloped due to missing practice and routine. Since modeling is key to many software engineering disciplines, we advocate for intensifying modeling activities in teaching.
Intelligent Tutoring Systems (ITSs) are increasingly used in modern education to automatically give students individual feedback on their performance. The advantage for students is fast individual feedback on their answers to asked questions, while lecturers benefit from considerable time savings and easy delivery of educational material. Of course, it is important that the provided feedback is as effective as direct feedback from the lecturer. However, in digital teaching, lecturers cannot assess the student’s knowledge precisely but can only provide information on which questions were answered correctly and incorrectly. Therefore, this paper presents a concept for integrating ITS elements into the gamified e-learning platform IT-REX so that the feedback quality can be improved to support students in the best possible way.
Digital twins deployed in production are important in practice and interesting for research. Currently, mostly structured data coming from e.g., sensors and timestamps of related stations, are integrated into Digital Twins. However, semi- and unstructured data are also important to display the current status of a digital twin (e.g., of a machinery or produced good). Process Mining and Text Mining in combination can be used to support the use of log file data to understand the current state of the process as well as highlight issues. Therefore, issue related reactions can be taken more quickly, targeted and cost oriented. Applying a design science research approach; here a prototype as an artefact based on derived requirements is developed. This prototype helps to understand and to clarify the possibilities of Process Mining and Text Mining based on log data for production related Digital Twins. Contributions for practice and research are described. Furthermore, limitations of the research and future opportunities are pointed out.
Digitalization and enterprise architecture management: a perspective on benefits and challenges
(2023)
Many companies digitally transform their business models, processes, and services. They have also been using Enterprise Architecture Management approaches for a long time to synchronize corporate strategy and information technology. Such digitalization projects bring different challenges for Enterprise Architecture Management. Without understanding and addressing them, Enterprise Architecture Management projects will fail or not deliver the expected value. Since existing research has not yet addressed these challenges, they were investigated based on a qualitative expert study with leading industry experts from Europe. Furthermore, potential benefits of digitalization projects for Enterprise Architecture Management were researched. Our results provide a theoretical framework consisting of five identified challenges, triggers and a number of benefits. Furthermore, we discuss in what ways digitalization and EAM is a promising topic for future research.
We introduce bloomRF as a unified method for approximate membership testing that supports both point- and range-queries. As a first core idea, bloomRF introduces novel prefix hashing to efficiently encode range information in the hash-code of the key itself. As a second key concept, bloomRF proposes novel piecewisemonotone hash-functions that preserve local order and support fast range-lookups with fewer memory accesses. bloomRF has near-optimal space complexity and constant query complexity. Although, bloomRF is designed for integer domains, it supports floating-points, and can serve as a multi-attribute filter. The evaluation in RocksDB and in a standalone library shows that it is more efficient and outperforms existing point-range-filters by up to 4× across a range of settings and distributions, while keeping the false-positive rate low.
Non-fungible tokens (NFTs) are unique digital assets that have recently gained significant popularity, particularly in the digital art sector. The success of NFTs and other blockchain-based innovations depends on their ac-acceptance and use by consumers. This study aims to understand the impact of moral values on the acceptance of NFTs. Based on a quantitative survey with over 800 complete responses, the analysis shows that moral aspects of NFTs are indeed important for potential users. However, there is an attitude-behavior gap, as the positive impact of moral values on the intention to use NFTs is not reflected in the actual current usage of NFTs by the respondents. This study contributes to knowledge by providing new empirical data on the acceptance of NFTs and highlighting the role of moral values on the acceptance decision.
The relevance of Robotic Process Automation (RPA) has increased over the last few years. Combining RPA with Artificial Intelligence (AI) can further enhance the business value of the technology. The aim of this research was to analyze applications, terminology, benefits, and challenges of combining the two technologies. A total of 60 articles were analyzed in a systematic literature review to evaluate the aforementioned areas. The results show that by adding AI, RPA applications can be used in more complex contexts, it is possible to minimize the human factor during the development process, and AI-based decision-making can be integrated into RPA routines. This paper also presents a current overview of the used terminology. Moreover, it shows that by integrating AI, some unseen challenges in RPA projects can emerge, but also a lot of new benefits will come along with it. Based on the outcome, it is concluded that the topic offers a lot of potential, but further research and development is required. The result of this study help researches to gain an overview of the state-of-the-art in combining RPA and AI.
Introduction: Even if there is a standard procedure of CI surgery, especially in pediatric surgery surgical steps often differ individually due to anatomical variations, malformations or unforseen events. This is why every surgical report should be created individually, which takes time and relies on the correct memory of the surgeon. A standardized recording of intraoperative data and subsequent storage as well as text processing would therefore be desirable and provides the basis for subsequent data processing, e.g. in the context of research or quality assurance.
Method: In cooperation with Reutlingen University, we conducted a workflow analysis of the prototype of a semi-automatic checklist tool. Based on automatically generated checklists generated from BPMN models a prototype user interface was developed for an android tablet. Functions such as uploading photos and files, manual user entries, the interception of foreseeable deviations from the normal course of operations and the automatic creation of OP documentation could be implemented. The system was tested in a remote usability test on a petrous bone model.
Result: The user interface allows a simple intuitive handling, which can be well implemented in the intraoperative setting. Clinical data as well as surgical steps could be individually recorded and saved via DICOM. An automatic surgery report could be created and saved.
Summary: The use of a dynamic checklist tool facilitates the capture, storage and processing of surgical data. Further applications in clinical practice are pending.
Transforming our food system is important to achieving global climate neutrality and food security. Germany has set a national target of reaching a 30% share in organic farming to support the goal. When looking at the transformation process from conventional to organic farming, it becomes apparent that measures need to be taken to reach this anticipated goal. A particular emphasis of this work is placed on finding a digital solution and process improvements to ensure longevity and efficiency. Interviews with actors along the farm-to-fork value chain were conducted to identify central barriers and drivers of organic transformation. The results of the interviews show firstly, that three subsystems need to be distinguished when talking about the farm-to-fork value chain: (1) farmers, (2) intermediaries, and (3) the canteen system. Although all three subsystems can be combined to form a coherent value chain, they rarely act and communicate beyond the boundaries of their subsystem. Secondly, we were able to allocate primary barriers and drivers to each of the subsystems, highlighting the need to include all three in the transformation process and aim for a comprehensive digital solution. This work explores the potential of a network-based platform to improve the current practice of rigid and strictly hierarchical value chains. We focus on deriving user requirements from the interviews to describe the necessary functionality of the platform to address the identified barriers and exploit existing drivers.
While driving, stress is caused by situations in which the driver estimates their ability to manage the driving demands as insufficient or loses the capability to handle the situation. This leads to increased numbers of driver mistakes and traffic violations. Additional stressing factors are time pressure, road conditions, or dislike for driving. Therefore, stress affects driver and road safety. Stress is classified into two categories depending on its duration and the effects on the body and psyche: short-term eustress and constantly present distress, which causes degenerative effects. In this work, we focus on distress. Wearable sensors are handy tools for collecting biosignals like heart rate, activity, etc. Easy installation and non-intrusive nature make them convenient for calculating stress. This study focuses on the investigation of stress and its implications. Specifically, the research conducts an analysis of stress within a select group of individuals from both Spain and Germany. The primary objective is to examine the influence of recognized psychological factors, including personality traits such as neuroticism, extroversion, psychoticism, stress and road safety. The estimation of stress levels was accomplished through the collection of physiological parameters (R-R intervals) using a Polar H10 chest strap. We observed that personality traits, such as extroversion, exhibited similar trends during relaxation, with an average heart rate 6% higher in Spain and 3% higher in Germany. However, while driving, introverts, on average, experienced more stress, with rates 4% and 1% lower than extroverts in Spain and Germany, respectively.
Purpose
Digital transformation of organizations has major implications for required skills and competencies of the workforce, both as a prerequisite for implementation, and, as a consequence of the transformation. The purpose of this study is to analyze required skills and competencies for digital transformation using the context of robotic process automation (RPA) as an example.
Design/methodology/approach
This study is based on an explorative, thematic coding analysis of 119 job advertisements related to RPA. The data was collected from major online job platforms, qualitatively coded and subsequently analyzed quantitatively.
Findings
The research highlights the general importance of specific skills and competencies for digital transformation and shows a gap between available skills and required skills. Moreover, it is concluded that reskilling the existing workforce might be difficult. Many emerging positions can be found in the consulting sector, which raises questions about the permanent vs temporary nature of the requirements, as well as the difficulty of acquiring the required knowledge.
Originality/value
This paper contributes to knowledge by providing new empirical findings and a novel perspective to the ongoing discussion of digital skills, employment effects and reskilling demands of the existing workforce owing to recent technological developments and automation in the overall context of digital transformation.
In the last few years, business firms have substantially invested into the artificial intelligence (AI) technology. However, according to several studies, a significant percentage of AI projects fail or do not deliver business value. Due to the specific characteristics of AI projects, the existing body of knowledge about success and failure of information systems (IS) projects in general may not be transferrable to the context of AI. Therefore, the objective of our research has been to identify factors that can lead to AI project failure. Based on interviews with AI experts, this article identifies and discusses 12 factors that can lead to project failure. The factors can be further classified into five categories: unrealistic expectations, use case related issues, organizational constraints, lack of key resources, and, technological issues. This research contributes to knowledge by providing new empirical data and synthesizing the results with related findings from prior studies. Our results have important managerial implications for firms that aim to adopt AI by helping the organizations to anticipate and actively manage risks in order to increase the chances of project success.
In the context of digital transformation, having a data-driven organizational culture has been recognized as an important factor for data analytics capabilities, innovativeness and competitive advantage of firms. However, the current literature on data-driven culture (DDC) is fragmented, lacking both a synthesis of findings and a theoretical foundation. Therefore, the aim of this work has been to develop a comprehensive framework for understanding DDC and the mechanisms that can be used to embed such a culture in organizations as well as structuring prior dispersed findings on the topic. Based on the foundation of organizational culture theory, we employed a Design Science Research (DSR) approach using a systematic literature review and expert interviews to build and evaluate a transformation-oriented framework. This research contributes to knowledge by synthesizing previously dispersed knowledge in a holistic framework, as well as, by providing a conceptual framework to guide the transformation towards a DDC.
Assistant platforms
(2023)
Many assistant systems have evolved toward assistant platforms. These platforms combine a range of resources from various actors via a declarative and generative interface. Among the examples are voice-oriented assistant platforms like Alexa and Siri, as well as text-oriented assistant platforms like ChatGPT and Bard. They have emerged as valuable tools for handling tasks without requiring deeper domain expertise and have received large attention with the present advances in generative artificial intelligence. In view of their growing popularity, this Fundamental outlines the key characteristics and capabilities that define assistant platforms. The former comprise a multi-platform architecture, a declarative interface, and a multi-platform ecosystem, while the latter include capabilities for composition, integration, prediction, and generativity. Based on this framework, a research agenda is proposed along the capabilities and affordances for assistant platforms.
Platforms feature increasingly complex architectures with regard to interconnecting with other digital platforms as well as with a variety of devices and services. This development also impacts the structure of digital platform ecosystems and forces providers of these services, devices, and services to incorporate this complexity in their decision-making. To contribute to the existing body of knowledge on measuring ecosystem complexity, the present research proposes two key artefacts based on ecosystem intelligence: On the one hand, complementarity graphs represent ecosystems with an ecosystem's functional modules as vertices and complementarities as edges. The nodes carry information about the category membership of the module. On the other hand, a process is suggested that can collect important information for ecosystem intelligence using proxies and web scraping. Our approach allows replacing data, which today is largely unavailable due to competitive reasons. We demonstrated the use of the artefacts in category-oriented complementarity maps that aggregate the information from complementarity graphs and support decision-making. They show which combination of module categories creates strong and weak complementarities. The paper evaluates complementarity maps and the data collection process by creating category-oriented complementarity graphs on the Alexa skill ecosystem and concludes with a call to pursue more research based on functional ecosystem intelligence.
Introduction: Telemedicine reduces greenhouse gas emissions (CO2eq); however, results of studies vary extremely in dependence of the setting. This is the first study to focus on effects of telemedicine on CO2 imprint of primary care.
Methods: We conducted a comprehensive retrospective study to analyze total CO2eq emissions of kilometers (km) saved by telemedical consultations. We categorized prevented and provoked patient journeys, including pharmacy visits. We calculated CO2eq emission savings through primary care telemedical consultations in comparison to those that would have occurred without telemedicine. We used the comprehensive footprint approach, including all telemedical cases and the CO2eq emissions by the telemedicine center infrastructure. In order to determine the net ratio of CO2eq emissions avoided by the telemedical center, we calculated the emissions associated with the provision of telemedical consultations (including also the total consumption of physicians’ workstations) and subtracted them from the total of avoided CO2eq emissions. Furthermore, we also considered patient cases in our calculation that needed to have an in-person visit after the telemedical consultation. We calculated the savings taking into account the source of the consumed energy (renewable or not).
Results: 433 890 telemedical consultations overall helped save 1 800 391 km in travel. On average, 1 telemedical consultation saved 4.15 km of individual transport and consumed 0.15 kWh. We detected savings in almost every cluster of patients. After subtracting the CO2eq emissions caused by the telemedical center, the data reveal savings of 247.1 net tons of CO2eq emissions in total and of 0.57 kg CO2eq per telemedical consultation. The comprehensive footprint approach thus indicated a reduced footprint due to telemedicine in primary care.
Discussion: Integrating a telemedical center into the health care system reduces the CO2 footprint of primary care medicine; this is true even in a densely populated country with little use of cars like Switzerland. The insight of this study complements previous studies that focused on narrower aspects of telemedical consultations.
Measuring cardiorespiratory parameters in sleep, using non-contact sensors and the Ballistocardiography technique has received much attention due to the low-cost, unobtrusive, and non-invasive method. Designing a user-friendly, simple-to-use, and easy-to-deployment preserving less error-prone remains open and challenging due to the complex morphology of the signal. In this work, using four forcesensitive resistor sensors, we conducted a study by designing four distributions of sensors, in order to simplify the complexity of the system by identifying the region of interest for heartbeat and respiration measurement. The sensors are deployed under the mattress and attached to the bed frame without any interference with the subjects. The four distributions are combined in two linear horizontal, one linear vertical, and one square, covering the influencing region in cardiorespiratory activities. We recruited 4 subjects and acquired data in four regular sleeping positions, each for a duration of 80 seconds. The signal processing was performed using discrete wavelet transform bior 3.9 and smooth level of 4 as well as bandpass filtering. The results indicate that we have achieved the mean absolute error of 2.35 and 4.34 for respiration and heartbeat, respectively. The results recommend the efficiency of a triangleshaped structure of three sensors for measuring heartbeat and respiration parameters in all four regular sleeping positions.